, i have my mikrotik router working fine im just trying to share internet through it to my TP Link router i tried doing that normally through my TP Link rotuer as wifi extender or access point but it doesnt get any internet so i thought it might be a mikrotik config thing so im asking here this is my mikrotik config /interface bridge
add name=bridge1
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n disabled=no mode=ap-bridge \
ssid=azez
set [ find default-name=wlan2 ] ssid=MikroTik
/interface pppoe-client
add add-default-route=yes disabled=no interface=bridge1 name=pppoe-out1 \
password=1 use-peer-dns=yes user=azez@abady
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa2-psk mode=dynamic-keys \
supplicant-identity=MikroTik wpa2-pre-shared-key=azez1982
/ip pool
add name=dhcp_pool0 ranges=192.168.33.2-192.168.33.254
/ip dhcp-server
add address-pool=dhcp_pool0 disabled=no interface=bridge1 name=dhcp1
/interface bridge port
add bridge=bridge1 interface=ether5
add bridge=bridge1 interface=ether4
add bridge=bridge1 interface=ether2
add bridge=bridge1 interface=ether3
add bridge=bridge1 interface=wlan1
/ip address
add address=192.168.33.1/24 interface=bridge1 network=192.168.33.0
/ip dhcp-server network
add address=192.168.33.0/24 gateway=192.168.33.1
/ip dns
set allow-remote-requests=yes servers=8.8.8.8,8.8.4.4
/ip firewall nat
add action=masquerade chain=srcnat out-interface=!bridge1
/system clock
set time-zone-name=Asia/Baghdad
Thanks in advance