Missing Bad Block counter on CRS devices

sirca · Fri Feb 09, 2024 6:34 pm

Hi,
I have two CRS326-24G, a CRS317 and a CRS305 and no one in /system/resource/print is reporting Bad Block count.
Is it normal??

e.g.

[admin@MikroTik_CRS317] > system/resource/print 
                   uptime: 1d12h48m17s
                  version: 7.13.4 (stable)
               build-time: Feb/07/2024 09:59:26
         factory-software: 6.44.6
              free-memory: 929.4MiB
             total-memory: 1024.0MiB
                      cpu: ARM
                cpu-count: 2
                 cpu-load: 0%
           free-hdd-space: 1112.0KiB
          total-hdd-space: 15.8MiB
  write-sect-since-reboot: 1412
         write-sect-total: 3055183
        architecture-name: arm
               board-name: CRS317-1G-16S+
                 platform: MikroTik
[admin@MikroTik_CRS317] >

Thank you in advance.
Andrea

Cha0s · Tue Feb 13, 2024 9:49 pm

Both my CRS317 & CRS305 report bad blocks, but I am still running v6.x on those.

sirca · Wed Feb 14, 2024 12:12 am

IIRC during early ROS7.x release there were several posts on missing bad blocks counter, but I thought they had been "reintroduced".
With ROS6.x there was bad-blocks counter as I remember.
Is possible with the 7.x versions they are hidden if the value is 0.0 , as reported in an other post?
I saw some pictures in other post where the counter is present, but IIRC are only routers, no CRS switches.
Anyway, thank you for reply

Missing Bad Block counter on CRS devices

Missing Bad Block counter on CRS devices

Re: Missing Bad Block counter on CRS devices

Re: Missing Bad Block counter on CRS devices

Who is online