Hello,
May I ask if is possible with firmware 7.13 manage the CAP_AX(cAPGi-5HaxD2HaxD) device from my working Capsman manager running on device (RB952Ui-5ac2nD). I distributing caps option vis dhcp. CAP_AX has added static IP reservation in dhcp and getting caps server information. If I allow CAP on CAP_AX nothing happened.
Re: RB952Ui-5ac2nD Capsman
Yes but ...
Since 7.13 wave2 capsman is default present in ROS package.
AX is wave2. So you need to enable it there (not in wireless/capsman but via Wifi).
The "but"
Your device only has 16Mb of storage. So things might get really tight storage-wise ...
Since 7.13 wave2 capsman is default present in ROS package.
AX is wave2. So you need to enable it there (not in wireless/capsman but via Wifi).
The "but"
Your device only has 16Mb of storage. So things might get really tight storage-wise ...
-
-
corsairetc
just joined
- Posts: 15
- Joined:
Re: RB952Ui-5ac2nD Capsman
Hello, thank you for reply. IN CAP_AX is only WiFi item. Here I was check CAP enabled. The device still not detect the Capsman. Or should I install some package to capsman router ?
Re: RB952Ui-5ac2nD Capsman
Please post config of both devices so we can have a look.
-
-
corsairetc
just joined
- Posts: 15
- Joined:
Re: RB952Ui-5ac2nD Capsman
Hello here I attach two configurations.
1. Configuration of Capsmanager router
2. Configuration of CAP_AX here is only check CAP enabled in WiFi. But in configuration is nothing about it.
Thank you for any help.
1. Configuration of Capsmanager router
2. Configuration of CAP_AX here is only check CAP enabled in WiFi. But in configuration is nothing about it.
Thank you for any help.
You do not have the required permissions to view the files attached to this post.
Re: RB952Ui-5ac2nD Capsman
Start by resetting cAP AX to caps mode.
1- Currently is it not in caps mode or it WOULD show in config
This is already a giveaway
It's not listening for capsman ...
2- what's that setup with the 2 bridges for ?
You could have mentioned it from the start there are other things in effect which may impact the whole setup.
1- Currently is it not in caps mode or it WOULD show in config
This is already a giveaway
Code: Select all
configuration.mode=ap2- what's that setup with the 2 bridges for ?
You could have mentioned it from the start there are other things in effect which may impact the whole setup.
Re: RB952Ui-5ac2nD Capsman
You are missing the fact that ax (as well as wifi-qcom-ac) devices are managed by the new CAPsMAN, that is located on the WiFi menu item.
So you are currently not running the new CAPsMAN:
https://help.mikrotik.com/docs/display/ ... iFiCAPsMAN
So you are currently not running the new CAPsMAN:
Here you can find all required information:/interface/wifi/capsman
https://help.mikrotik.com/docs/display/ ... iFiCAPsMAN
Re: RB952Ui-5ac2nD Capsman
I "think" I already mentioned that in the first answer ... didn't I ? 
So clearly someone is not really listening.
So clearly someone is not really listening.
-
-
corsairetc
just joined
- Posts: 15
- Joined:
Re: RB952Ui-5ac2nD Capsman
Hello,
Second bridge is disabled. Here I attach screen of CAP enabled CAP AX
Second bridge is disabled. Here I attach screen of CAP enabled CAP AX
You do not have the required permissions to view the files attached to this post.
Re: RB952Ui-5ac2nD Capsman
Nope.
On your interface settings you have it configured as AP.
Not as CAP.
That setting you show is the first step to have it in caps mode but STILL you need to set it on interface as well which one should be used for caps mode.
Currently = ZERO.
That's why I suggested to reset to caps mode. Then all of this would be ok (and only 1 bridge).
I will quote myself:
On your interface settings you have it configured as AP.
Not as CAP.
That setting you show is the first step to have it in caps mode but STILL you need to set it on interface as well which one should be used for caps mode.
Currently = ZERO.
That's why I suggested to reset to caps mode. Then all of this would be ok (and only 1 bridge).
I will quote myself:
Start by resetting cAP AX to caps mode.
1- Currently is it not in caps mode or it WOULD show in config
This is already a giveawayIt's not listening for capsman ...Code: Select allconfiguration.mode=ap
-
-
corsairetc
just joined
- Posts: 15
- Joined:
Re: RB952Ui-5ac2nD Capsman
Hello,
thank you for quick reply. I have no choice to switch it in to cap on interfaceon CAp AX. See attach screen.
thank you for quick reply. I have no choice to switch it in to cap on interfaceon CAp AX. See attach screen.
You do not have the required permissions to view the files attached to this post.
Re: RB952Ui-5ac2nD Capsman
Why are you making it yourself so difficult ?
Why are you making it us so difficult to help you ?
Caps mode is enabled to listen on bridge.
Guess what's not connected to bridge ?
From the last config I see you have no wifi interfaces connected to any bridge.
3th time:
Reset cAP AX to caps mode so all of this is set correctly and proceed from there !
(in baseball that's strike 3 and out)
Why are you making it us so difficult to help you ?
Caps mode is enabled to listen on bridge.
Guess what's not connected to bridge ?
From the last config I see you have no wifi interfaces connected to any bridge.
3th time:
Reset cAP AX to caps mode so all of this is set correctly and proceed from there !
(in baseball that's strike 3 and out)
-
-
corsairetc
just joined
- Posts: 15
- Joined:
Re: RB952Ui-5ac2nD Capsman
Hello,
Thank you very much for your patience with me. I reset to CAPS mode. Now it looks better but wifi interfaces show me (no connection to CAPsMAN).
In WiFi and CAP menu I set up this:
On Capsman maneger, I have in provisioning for both radi MAC set MAC of wifi interfaces on CAP ax.
Thank you very much for your patience with me. I reset to CAPS mode. Now it looks better but wifi interfaces show me (no connection to CAPsMAN).
In WiFi and CAP menu I set up this:
interface/wifi/cap/print
Code: Select all
enabled: yes
discovery-interfaces: BridgeHome
certificate: none
caps-man-addresses: 192.168.0.251
slaves-datapath: capdp
interface/wifi/print
Code: Select all
# NAME
;;; no connection to CAPsMAN
0 MBX wifi1
;;; no connection to CAPsMAN
1 MBX wifi2
Re: RB952Ui-5ac2nD Capsman
Show config of capsman manager please.
Full config, not only wireless/wifi part.
Full config, not only wireless/wifi part.
-
-
corsairetc
just joined
- Posts: 15
- Joined:
Re: RB952Ui-5ac2nD Capsman
Hello,
here is the config for CapsmanManager. The last two provisioning lines are for the CapAX. I was shorten the MAC addresses.
here is the config for CapsmanManager. The last two provisioning lines are for the CapAX. I was shorten the MAC addresses.
You do not have the required permissions to view the files attached to this post.
Re: RB952Ui-5ac2nD Capsman
FULL config please ...
I need to see AT LEAST something like this
I need to see AT LEAST something like this
Code: Select all
/interface wifi capsman
set enabled=yes interfaces=<blabla> package-path= require-peer-certificate=no upgrade-policy=none-
-
corsairetc
just joined
- Posts: 15
- Joined:
Re: RB952Ui-5ac2nD Capsman
Ok, here is the export of full config.
You do not have the required permissions to view the files attached to this post.
Re: RB952Ui-5ac2nD Capsman
It would be wise if you at least read and understand the information which is been given to you.
The way you are acting here is a huge disrespect to those trying to help you.
E.g. the link erlinden showed you earlier in post #7:
https://help.mikrotik.com/docs/display/ ... ionexample:
You have NOTHING related to wave2 capsman configured. And you wonder why it does not work ?
I will quote you the relevant part, adjust as needed.
And have a nice rest of your life.
I'm outta here.
The way you are acting here is a huge disrespect to those trying to help you.
E.g. the link erlinden showed you earlier in post #7:
https://help.mikrotik.com/docs/display/ ... ionexample:
You have NOTHING related to wave2 capsman configured. And you wonder why it does not work ?
I will quote you the relevant part, adjust as needed.
And have a nice rest of your life.
I'm outta here.
Code: Select all
#create a security profile
/interface wifi security
add authentication-types=wpa3-psk name=sec1 passphrase=HaveAg00dDay
#create configuraiton profiles to use for provisioning
/interface wifi configuration
add country=Latvia name=5ghz security=sec1 ssid=CAPsMAN_5
add name=2ghz security=sec1 ssid=CAPsMAN2
add country=Latvia name=5ghz_v security=sec1 ssid=CAPsMAN5_v
#configure provisioning rules, configure band matching as needed
/interface wifi provisioning
add action=create-dynamic-enabled master-configuration=5ghz slave-configurations=5ghz_v supported-bands=\
5ghz-n
add action=create-dynamic-enabled master-configuration=2ghz supported-bands=2ghz-n
#enable CAPsMAN service
/interface wifi capsman
set ca-certificate=auto enabled=yes-
-
corsairetc
just joined
- Posts: 15
- Joined:
Re: RB952Ui-5ac2nD Capsman
I'm so sorry if I caused any problems. I'm trying to configure this for the first time and I'm getting lost in all the tutorials and advice. I wrote at the beginning that I am trying to add a new wifiwave2 device to an older Capsman manager. Anyway thanks a lot for the help.
Who is online
Users browsing this forum: No registered users and 13 guests