Hi All,

We have the following setup
1. CRS518-16XS-2XQ Port16 - Connect to the provider network
2. CRS518-16XS-2XQ Port15 - Connect to the CCR2216
3. CCR2216-1G-12XS-2XQ Port12 Connects to CRS518-16XS-2XQ

Provider gives us MPLS L2 Connectivity to various locations and gives separate VLANs for each location.
VLAN18 for Location A
VLAN19 for Location B

Right now in the CRS we have a bridge and add VLANs in the bridge itself. In the CCR2216 we have configured VLAN18 and 19 in Port 12. Each VLAN gets its /30 subnet.
Please note that Location A and Location B ends don't need VLAN to be configured.

I want to know if this is a way to do it or if there is a better way.