Community discussions

MikroTik App
 
wallnas
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 75
Joined: Thu Aug 27, 2009 5:08 pm
Location: Italy

How configure RB433UAH with modem USB Huawei E173

Sat Dec 10, 2011 6:09 pm

I have a RB 433UAH and modem Huawei E173 of H3G

In the System port i have only serial port 0

How i can configure the modem and use it on my lan ?

Tanks for your help
Last edited by wallnas on Wed Dec 14, 2011 10:31 pm, edited 1 time in total.
 
User avatar
ojsa
Member Candidate
Member Candidate
Posts: 181
Joined: Tue Jan 27, 2009 8:53 pm
Location: Norway

Re: How configure RB433UAH with modem USB Huawei E173

Sun Dec 11, 2011 12:04 am

add PPP interface with details refering to your cellphone provider and connect the PPP to your selected port (port0?)
Could be that you have to add data channel en info channel, but since i don't have this equipment i can not test that.
 
wallnas
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 75
Joined: Thu Aug 27, 2009 5:08 pm
Location: Italy

Re: How configure RB433UAH with modem USB Huawei E173

Wed Dec 14, 2011 7:37 pm

Tank you for your information, but my problem is on modem HUAWEI E173s-2

In the system resource USB i see the modem, in the system port, no

What is the problem ?

In the supported hardware http://wiki.mikrotik.com/wiki/Supported_Hardware there is the Huawei E173

My Vers of routerOs is 5.11


Tanks form your help
You do not have the required permissions to view the files attached to this post.
 
fjapa
just joined
Posts: 2
Joined: Tue Apr 17, 2012 2:40 am

Re: How configure RB433UAH with modem USB Huawei E173

Tue Apr 17, 2012 3:02 am

Wallnas, I am having a similar problem. Did you resolved this problem?
Thanks.
 
wallnas
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 75
Joined: Thu Aug 27, 2009 5:08 pm
Location: Italy

Re: How configure RB433UAH with modem USB Huawei E173

Tue Apr 17, 2012 8:27 pm

Wallnas, I am having a similar problem. Did you resolved this problem?
Thanks.
Modem is switched to wrong mode, that's why it is not recognized by RouterOS.
Plug your 3G modem to Windows or other OS and run AT command to switch it to
correct mode,
AT^U2DIAG=1
http://3g-modem.wetpaint.com/page/Huawei+AT-commands

After command will be applied, modem will be recognized in RouterOS v5.12

bye
 
User avatar
phallaccmt
just joined
Posts: 10
Joined: Tue Jun 23, 2015 7:34 pm

Re: How configure RB433UAH with modem USB Huawei E173

Mon Aug 21, 2017 6:32 am

Modem is switched to wrong mode, that's why it is not recognized by RouterOS.
Plug your 3G modem to Windows or other OS and run AT command to switch it to
correct mode,
AT^U2DIAG=1
http://3g-modem.wetpaint.com/page/Huawei+AT-commands

After command will be applied, modem will be recognized in RouterOS v5.12



-----------------------------

How to run AT command

Who is online

Users browsing this forum: Ahrefs [Bot], Bing [Bot], CGGXANNX and 74 guests