Is this card functional under MT ???
http://www.intel.com/network/connectivi ... dapter.htm
It's based on Intel® 82571GB Gigabit Controller ...
or which pci-e dual ethernet card will be good for us ?
if mikrotik using e1000-4.3.15.tar.gz (kernel 2.2 & 2.4), then your card won't work
if mikrotik using e1000-7.0.38.tar.gz (kernel 2.4 & 2.6), then I think your card might works fine
http://downloadfinder.intel.com/scripts ... 0&lang=eng
given above situation and from http://www.mikrotik.com/docs/ros/2.9/guide/driverlist
I think your card might work! :P
if mikrotik using e1000-7.0.38.tar.gz (kernel 2.4 & 2.6), then I think your card might works fine
http://downloadfinder.intel.com/scripts ... 0&lang=eng
given above situation and from http://www.mikrotik.com/docs/ros/2.9/guide/driverlist
I think your card might work! :P
Finally we bought this http://www.intel.com/network/connectivi ... dapter.htm and it work very well 
-
-
oriondotnet
Frequent Visitor
- Posts: 65
- Joined:
Intel Card below is MT not PT..., never tested PT because no one sell in my country
Allright...
Here is what I've found for Intel DUAL port Server Adapter PRO/1000MT
1. You can only use 1 port for GIGABIT
2. If you plug both port into Gigabit swicth, then speed down to 100 Mbps or stuck ( both port not working ).
3. This is happen NOT only in MikroTik, but also in FreeBSD
My suggestion :
1. DON'T BUY DUAL PORT INTEL SERVER ADAPTOR ( refund if you can and get exchange to 1 port )
2. Get 1 port Intel Server Adaptor
So.. since I can't refund the dual port, I use DUAL port with 1 port only for Gigabit connection
That's from my experience... hope this help
Allright...
Here is what I've found for Intel DUAL port Server Adapter PRO/1000MT
1. You can only use 1 port for GIGABIT
2. If you plug both port into Gigabit swicth, then speed down to 100 Mbps or stuck ( both port not working ).
3. This is happen NOT only in MikroTik, but also in FreeBSD
My suggestion :
1. DON'T BUY DUAL PORT INTEL SERVER ADAPTOR ( refund if you can and get exchange to 1 port )
2. Get 1 port Intel Server Adaptor
So.. since I can't refund the dual port, I use DUAL port with 1 port only for Gigabit connection
That's from my experience... hope this help
Last edited by oriondotnet on Thu Jun 08, 2006 12:45 pm, edited 1 time in total.
-
-
oriondotnet
Frequent Visitor
- Posts: 65
- Joined:
what I mean is MT not PT... sorry....