Statistics: Posted by menyarito — Sat Mar 30, 2024 6:19 am
Statistics: Posted by samiesmail — Sat Mar 30, 2024 6:08 am
Statistics: Posted by CGGXANNX — Sat Mar 30, 2024 5:55 am
Statistics: Posted by fengyuclub — Sat Mar 30, 2024 5:38 am
Statistics: Posted by samiesmail — Sat Mar 30, 2024 5:22 am
Statistics: Posted by ckonsultor — Sat Mar 30, 2024 3:13 am
Statistics: Posted by mikrochad — Sat Mar 30, 2024 3:07 am
Statistics: Posted by MTNick — Sat Mar 30, 2024 2:06 am
Statistics: Posted by kevinds — Sat Mar 30, 2024 2:02 am
Statistics: Posted by jaclaz — Sat Mar 30, 2024 2:01 am
Statistics: Posted by kiyre — Sat Mar 30, 2024 1:56 am
{/ip firewall address-list:local update do={ :put "Starting import of address-list: $listname" :if ($nolog = null) do={:log warning "Starting import of address-list: $listname"} :local displayed true :local maxretry 3 :local retrywaitingtime 120s :local retryflag true :for retry from=1 to=$maxretry step=1 do={ :if (retryflag) do={ :set $retryflag false; :set $sounter 0 :if (retry > 1) do={ :put "Source file changed. Retring after a $retrywaitingtime wait..." :if ($nolog = null) do={:log warning "Source file changed. Retring after a $retrywaitingtime wait..."} :delay $retrywaitingtime } :local fetchResult [/tool fetch url=$url keep-result=no as-value] :local filesize ($fetchResult->"total") :local downsize ($fetchResult->"downloaded") :if ($filesize = 0 && $downsize > 0) do={ :set $filesize $downsize} :local start 0 :local maxsize 64000; # reqeusted chunk size :local end ($maxsize - 1);# because start is zero the maxsize has to be reduced by one :local partnumber ($filesize / ($maxsize / 1024)); # how many chunk are maxsize :local remainder ($filesize % ($maxsize / 1024)); # the last partly chunk :if ($remainder > 0) do={ :set $partnumber ($partnumber + 1) }; # total number of chunks :if ($heirule != null) do={:put "Using as extra filtering: $heirule"} else={:set $heirule "."} # remove the current list completely if "erase" is not present (default setting) :if ($noerase = null) do={ :if ($timeout = null) do={:set $timeout 00:00:00; :do {:foreach i in=[/ip firewall address-list find list=$listname] do={/ip firewall address-list set list=("backup".$listname) $i }} on-error={} } else={ :do {:foreach i in=[/ip firewall address-list find list=$listname dynamic] do={/ip firewall address-list set list=("backup".$listname) $i }} on-error={} }; :put ("Conditional deleting all".$dynamic." entries in address-list: $listname") :if ($nolog = null) do={:log warning ("Conditional deleting all".$dynamic." entries in address-list: $listname")} } else={:put "Entries not conditional deleted in address-list: $listname"}; # ENDIF ERASE :for x from=1 to=$partnumber step=1 do={ # get filesize to be compared to the orignal one and if changed then retry :local comparesize ([/tool fetch url=$url keep-result=no as-value]->"total") :if ($comparesize = 0 && $downsize > 0) do={ :set $comparesize $downsize} # fetching the chunks from the webserver when the size of the source file has not changed # empty array when the source file changed. No processing is done till the next complete retry :if ($comparesize = $filesize) do={:set $data ([:tool fetch url=$url http-header-field="Range: bytes=$start-$end" output=user as-value]->"data")} else={:set $data [:toarray ""]; :set $retryflag true} #:if ($ownposix = null) do={ # determining the used delimiter in the list, when not provided in the config # this only run once and so the impact on the import time is low :local ipv4Posix "^[0-9]{1,3}\\.[0-9]{1,3}\\.[0-9]{1,3}\\.[0-9]{1,3}" :local ipv4rangePosix "^[0-9]{1,3}\\.[0-9]{1,3}\\.[0-9]{1,3}\\.[0-9]{1,3}/[0-9]{1,2}" :local domainPosix "^.+\\.[a-z.]{2,7}" :local sdata $data; # removes any lines at the top of the file that could interfere with finding the correct posix. Setting remarksign is needed :while ([:pick $sdata 0 1] = $remarksign) do={ :set $sdata [:pick $sdata ([:find $sdata "\n"]+1) [:len $sdata]] } :while ([:len $sdata]!=0 && $delimiter = null) do={ # The check on length of $sdata is for if no delimiter is found. :local sline [:pick $sdata 0 [:find $sdata "\n"]]; :local slen [:len $sline]; # set posix depending of type of data used in the list :if ($sline ~ $ipv4Posix) do={:set $posix $ipv4Posix; :set $iden "List identified as a IPv4 list"} :if ($sline ~ $ipv4rangePosix)do={:set $posix $ipv4rangePosix; :set $iden "List identified as a IPv4 with ranges list"} :if ($sline ~ $domainPosix) do={:set $posix $domainPosix; :set $iden "List identified as a domain list"} :if ($sline ~ $posix) do={:put $iden} :if ($sline ~ $posix) do={ # only explore the line if there is a match at the start of the line. :do {:if ([:pick $sline 0 ($slen-$send)] ~ ($posix."\$") || $send > $slen) do={ :set $delimiter [:pick $sline ($slen-$send) ($slen-($send-1))]; :set $result true} else={:set $send ($send+1)} :if ($result) do={ :set $extra [:pick $sline ($slen-$send) ($slen-($send-1))] :if ( $extra = " " ) do={ :set $delimiter [:pick $sline ($slen-$send) ($slen-($send-2))] } :if ( $extra = " " ) do={ :set $delimiter [:pick $sline ($slen-$send) ($slen-($send-3))] } :if ( $extra = " " ) do={ :set $delimiter [:pick $sline ($slen-$send) ($slen-($send-4))] } }; # EndIf result } while (!$result); # EndDoWhile }; #IF sline posix:set $sdata [:pick $sdata ([:find $sdata "\n"]+1) [:len $sdata]]; # cut off the already searched lines:if ($delimiter != null) do={:local sdata [:toarray ""]} ; #Clearing sdata array ending the WhileDo loop }; #WHILE END $sdata :local sdata [:toarray ""] :if ([:len $delimiter] = 0) do={ :set $delimiter "\n"; :set $delimiterShow "New Line" } else={ :set $delimiterShow $delimiter }; # when empty use NewLine 20220529 #} else={:put "User defind Posix: $ownposix"; :set $posix $ownposix } ; # ENDIF ownposix = null :if ($delimiter != null && $displayed ) do={:set $displayed false; :put "Using config provided delimiter: \"$delimiterShow\""} :if ($posix = null) do={:set $posix "."}; # Use a match all posix if nothing is defined or found :if (!retryflag) do={:put "Reading Part: $x $start - $end"} :if ($timeout = null) do={:local timeout 00:00:00}; # if no timeout is defined make it a static entry. # Only remove the first line only if you are not at the start of list :while ( [:pick $data 0 1] = $remarksign) do={ :set $data [:pick $data ([:find $data "\n"]+1) [:len $data]] }; # removes the invalid line (Spamhaus) :if ($start > 0) do={:set $data [:pick $data ([:find $data "\n"]+1) [:len $data]]} :while ([:len $data]!=0) do={ :local line [:pick $data 0 [:find $data "\n"]]; # create only once and checked twice as local variable :if ( $line ~ $posix && $line~heirule) do={ :do {add list=$listname address=[:pick $data 0 [:find $data $delimiter]] comment=$comment timeout=$timeout; :set $counter ($counter + 1)} on-error={}; # on error avoids any panics }; # if IP address && extra filter if present :set $data [:pick $data ([:find $data "\n"]+1) [:len $data]]; # removes the just added IP from the data array # Cut of the end of the chunks by removing the last lines...very dirty but it works :if ([:len $data] < 256) do={:set $data [:toarray ""]} }; # while :set $start (($start-512) + $maxsize); # shifts the subquential start back by 512 :set $end (($end-512) + $maxsize); # shift the subquential ends back by 512 to keep the }; # if retryflag }; #do for x }; # for retry :if ($counter < 1) do={:set $resultline "Import was NOT successfull! Check if the list $listname is still being maintained."} else={:set $resultline "Completed reading $counter items into address-list $listname." } :put $resultline :if ($nolog = null) do={:log warning $resultline } :if ($counter > 0) do={:do {/ip firewall address-list remove [find where list=("backup".$listname)]} on-error={} } else={ :do {:foreach i in=[/ip firewall address-list find list=("backup".$listname)] do={/ip firewall address-list set list=$listname $i }} on-error={} :put "Restoring backup list: $listname" :if ($nolog = null) do={:log warning "Restoring backup list: $listname"} }; # if counter restore on failure and remove on success}; # do$update url=https://www.spamhaus.org/drop/drop.txt listname=spamhaus delimiter=("\_") timeout=1d}# To be used configline settings:# url= https://name.of.the.list# listname=name of address-list# Optinal settings# timeout=the time the entry should be active. If omited then static entries are created.# comment=puts this comment on every line in the choosen address-list (default: no comment)# heirule=this will select on a word on each line if to import or not (default: no heirule)# noerase=any value, then the current list is not erased (default: erase)# ownPosix=allow to enter a onw regEX posix to be used (not ative at this moment)# nolog= any value, then don't write to the log (default: writing to log)
Statistics: Posted by MTNick — Sat Mar 30, 2024 1:54 am
Statistics: Posted by Greyhard — Sat Mar 30, 2024 12:59 am
Statistics: Posted by lpns — Sat Mar 30, 2024 12:36 am
Statistics: Posted by morphema — Sat Mar 30, 2024 12:30 am
Statistics: Posted by maxslug — Sat Mar 30, 2024 12:10 am
Statistics: Posted by Amm0 — Sat Mar 30, 2024 12:08 am
Statistics: Posted by NetTecture — Sat Mar 30, 2024 12:07 am
/disk/add type=nfs slot="Mounted_DIR_NAME" nfs-address="NAS_IP" nfs-share="Exported_DIR_NAME"
Statistics: Posted by Slys — Sat Mar 30, 2024 12:01 am
Statistics: Posted by ucdude — Fri Mar 29, 2024 11:58 pm
Statistics: Posted by bpwl — Fri Mar 29, 2024 11:57 pm
Statistics: Posted by LeoNaXe — Fri Mar 29, 2024 11:22 pm
Statistics: Posted by Larsa — Fri Mar 29, 2024 11:18 pm
Statistics: Posted by Scoox — Fri Mar 29, 2024 11:04 pm
Statistics: Posted by jaclaz — Fri Mar 29, 2024 11:02 pm
Statistics: Posted by holvoetn — Fri Mar 29, 2024 10:48 pm
Do you mean not to use "all ethernet" but to specify a specific single interface? That choice was made from the pull-down menu.I'd avoid using this ... AFAIK it's an interface-list (not interface)
Statistics: Posted by ckonsultor — Fri Mar 29, 2024 10:47 pm
Statistics: Posted by cableknot — Fri Mar 29, 2024 10:39 pm
:local if $interface:local ip $"lease-address":local gw $"gateway-address":if ($bound=1) do={ /routing table add fib name=$if comment=$if /routing rule add src-address=$ip table=$if action=lookup comment=$if /ip route add dst-address=0.0.0.0/0 routing-table=$if gateway=$if distance=20 } else { /ip route remove [find routing-table=$if] /routing rule remove [find table=$if] /routing table remove [find name name=$if]}
Statistics: Posted by Larsa — Fri Mar 29, 2024 10:39 pm
Statistics: Posted by ucdude — Fri Mar 29, 2024 10:13 pm
Please check which frequency your wifi1 interface chose.Neither my hAP ax2 nor my cAP ax, which I received today, show the 5 GHz SSID. Is this the same problem as what's being discussed here?
Statistics: Posted by Scoox — Fri Mar 29, 2024 10:12 pm
Statistics: Posted by anav — Fri Mar 29, 2024 10:03 pm
# 1970-01-02 01:38:37 by RouterOS 7.14.1# software id = LU4G-2UN3## model = RB5009UG+S+# serial number = xxxxx/diskset data slot=data/interface ethernetset [ find default-name=ether1 ] advertise=1G-baseT-full/interface pppoe-clientadd disabled=no interface=ether8 name=ACT user=pppoeuser125231/interface vethadd address=192.168.100.2/24 gateway=192.168.100.1 gateway6="" name=veth1/interface listadd name=LAN/ip pooladd name=Wireless_AP ranges=192.168.50.10-192.168.50.200add name=LAN_WIRED ranges=192.168.70.10-192.168.70.200/ip dhcp-serveradd address-pool=Wireless_AP interface=ether1 name=WIRELESS_APadd address-pool=LAN_WIRED interface=ether2 name=WIRED_LAN/routing tableadd disabled=no fib name=ACT_RTBadd disabled=no fib name=AIRTEL_RTB/containeradd envlist=nextdns_param hostname=nextdns interface=veth1 logging=yes root-dir=data/tmp/nextdns start-on-boot=yes/container configset ram-high=200.0MiB tmpdir=data/tmp/container envsadd key=NEXTDNS_ARGUMENTS name=nextdns_param value="-listen :53 -report-client-info -log-queries -profile xxxx -forwarder 3gppnetwork.org=183.83.\ 185.156,182.74.53.95,122.186.120.249,61.95.251.207,1.10.10.10,8.8.8.8 -cache-size 20MB"/interface list memberadd interface=ether1 list=LANadd interface=ether2 list=LAN/ip addressadd address=192.168.50.1/24 interface=ether1 network=192.168.50.0add address=192.168.70.1/24 interface=ether2 network=192.168.70.0add address=192.168.1.10/24 interface=ether7 network=192.168.1.0/ip dhcp-server leaseadd address=192.168.50.168 mac-address=xx:xx:xx:xx:xx server=WIRELESS_AP/ip dhcp-server networkadd address=192.168.50.0/24 dns-server=192.168.50.1 gateway=192.168.50.1 netmask=24add address=192.168.70.0/24 dns-server=192.168.70.1 gateway=192.168.70.1 netmask=24/ip firewall address-listadd address=192.168.50.1 list=ROUTER_IPSadd address=192.168.70.1 list=ROUTER_IPS/ip firewall filteradd action=accept chain=input connection-state=established,related,untrackedadd action=drop chain=input comment="drop invalid packets" connection-state=invalidadd action=accept chain=input comment="accept ICMP" protocol=icmpadd action=drop chain=input comment="DROP ALL packets" in-interface-list=!LANadd action=fasttrack-connection chain=forward connection-state=established,related hw-offload=yesadd action=accept chain=input in-interface=veth1 src-address-list=""add action=accept chain=forward connection-state=established,related,untrackedadd action=drop chain=forward connection-state=invalid/ip firewall mangleadd action=mark-connection chain=prerouting connection-mark=no-mark in-interface=ACT new-connection-mark=ACT_IN passthrough=yesadd action=mark-connection chain=prerouting connection-mark=no-mark in-interface=ether7 new-connection-mark=AIRTEL_IN passthrough=yesadd action=mark-routing chain=output connection-mark=ACT_IN new-routing-mark=ACT_RTB passthrough=noadd action=mark-routing chain=output connection-mark=AIRTEL_IN new-routing-mark=AIRTEL_RTB passthrough=noadd action=mark-connection chain=prerouting dst-address-type=!local in-interface-list=LAN new-connection-mark=ACT_IN passthrough=yes \ per-connection-classifier=both-addresses-and-ports:2/0add action=mark-connection chain=prerouting dst-address-type=!local in-interface-list=LAN new-connection-mark=AIRTEL_IN passthrough=yes \ per-connection-classifier=both-addresses-and-ports:2/1add action=mark-routing chain=prerouting connection-mark=ACT_IN in-interface-list=LAN new-routing-mark=ACT_RTB passthrough=noadd action=mark-routing chain=prerouting connection-mark=AIRTEL_IN in-interface-list=LAN new-routing-mark=AIRTEL_RTB passthrough=no/ip firewall natadd action=dst-nat chain=dstnat comment="force redirect DNS (UDP)" dst-port=53 in-interface-list=LAN protocol=udp to-addresses=192.168.100.2 \ to-ports=53add action=dst-nat chain=dstnat comment="force redirect DNS (TCP)" dst-port=53 in-interface-list=LAN protocol=tcp to-addresses=192.168.100.2 \ to-ports=53add action=masquerade chain=srcnat src-address-list=192.168.100.0/24add action=masquerade chain=srcnat out-interface=ACTadd action=masquerade chain=srcnat out-interface=ether7/ip routeadd disabled=no dst-address=0.0.0.0/0 gateway=ACT routing-table=main suppress-hw-offload=noadd disabled=no distance=1 dst-address=0.0.0.0/0 gateway=ether7 pref-src="" routing-table=main scope=30 suppress-hw-offload=no target-scope=10add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=1.1.1.1 pref-src="" routing-table=main scope=10 suppress-hw-offload=no \ target-scope=14add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=9.9.9.9 pref-src="" routing-table=main scope=10 suppress-hw-offload=no \ target-scope=14add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=1.1.1.1 routing-table=ACT_RTB scope=10 suppress-hw-offload=no target-scope=14add disabled=no distance=2 dst-address=0.0.0.0/0 gateway=9.9.9.9 pref-src="" routing-table=ACT_RTB scope=10 suppress-hw-offload=no target-scope=14add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=9.9.9.9 pref-src="" routing-table=AIRTEL_RTB scope=10 suppress-hw-offload=no \ target-scope=14add disabled=no distance=2 dst-address=0.0.0.0/0 gateway=1.1.1.1 pref-src="" routing-table=AIRTEL_RTB scope=10 suppress-hw-offload=no \ target-scope=14add disabled=no dst-address=1.1.1.1/32 gateway=ACT routing-table=main scope=10 suppress-hw-offload=no target-scope=13add disabled=no distance=1 dst-address=9.9.9.9/32 gateway=ether7 pref-src="" routing-table=main scope=10 suppress-hw-offload=no target-scope=13/system noteset show-at-login=no/system ntp clientset enabled=yes/system ntp client serversadd address=time.google.com
Statistics: Posted by vijayrajah — Fri Mar 29, 2024 10:03 pm
Double and triple shielded" USB 3 extension cables exists, but how much effective they are has to be seen.
Like most of issues where RF Is involved It Is - I believe - largely a hit and miss game.
Statistics: Posted by Nullcaller — Fri Mar 29, 2024 9:43 pm
Statistics: Posted by mkx — Fri Mar 29, 2024 9:25 pm
Statistics: Posted by sawa — Fri Mar 29, 2024 9:17 pm
/ip dhcp-server lease
add address=10.10.10.10 client-id=1:b8:69:///:aa mac-address=\
B8:69:F4:47:5D:AA server=server10
/ip dhcp-server network
add address=10.10.10.0/24 gateway=10.10.10.10 netmask=24
I'd avoid using this ... AFAIK it's an interface-list (not interface) and I'm scared of using anything automatic in ROS, most auto things have tendency to cause trouble.add action=dst-nat chain=dstnat dst-port=ZZZZ in-interface=all-ethernet \
protocol=tcp to-addresses=192.168.55.228 to-ports=22
Statistics: Posted by mkx — Fri Mar 29, 2024 9:15 pm
Statistics: Posted by ckonsultor — Fri Mar 29, 2024 9:07 pm
# mar/29/2024 14:13:50 by RouterOS 6.49.10# software id = 52xxx## model = RouterBOARD 952Ui-///# serial number = 71AF////interface wirelessset [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40mhz-XX \ disabled=no distance=indoors frequency=auto installation=indoor mode=\ ap-bridge ssid=/// wireless-protocol=802.11 wps-mode=disabledset [ find default-name=wlan2 ] band=5ghz-a/n/ac channel-width=\ 20/40/80mhz-XXXX disabled=no distance=indoors frequency=auto \ installation=indoor mode=ap-bridge ssid=/// wireless-protocol=\ 802.11 wps-mode=disabled/interface bridgeadd admin-mac=B8:69:F4:1D:6B:C0 auto-mac=no comment=defconf name=bridge/interface listadd comment=defconf name=WANadd comment=defconf name=LAN/interface wireless security-profilesset [ find default=yes ] authentication-types=wpa2-psk mode=dynamic-keys \ supplicant-identity=M/// wpa2-pre-shared-key=xxx/ip pooladd name=default-dhcp ranges=192.168.88.10-192.168.88.254add name=pool10 ranges=10.10.10.10-10.10.10.19/ip dhcp-serveradd address-pool=default-dhcp disabled=no interface=bridge name=defconfadd address-pool=pool10 disabled=no interface=ether3 name=server10/interface bridge portadd bridge=bridge comment=defconf interface=ether2add bridge=bridge comment=defconf disabled=yes interface=ether3add bridge=bridge comment=defconf interface=ether4add bridge=bridge comment=defconf interface=ether5add bridge=bridge comment=defconf interface=wlan1add bridge=bridge comment=defconf interface=wlan2/ip neighbor discovery-settingsset discover-interface-list=LAN/interface list memberadd comment=defconf interface=bridge list=LANadd comment=defconf interface=ether1 list=WANadd interface=ether3 list=LAN/ip addressadd address=192.168.88.1/24 comment=defconf interface=bridge network=\ 192.168.88.0add address=10.10.10.1/24 interface=ether3 network=10.10.10.0/ip dhcp-clientadd comment=defconf disabled=no interface=ether1/ip dhcp-server leaseadd address=192.168.88.245 mac-address=1C:6F:65:21:95:8C server=defconfadd address=192.168.88.239 client-id=1:14:cb:19:97:d6:ba mac-address=\ 14:CB:19:97:D6:BA server=defconfadd address=10.10.10.10 client-id=1:b8:69:///:aa mac-address=\ B8:69:F4:47:5D:AA server=server10add address=192.168.88.228 mac-address=B0:A4:/// server=defconfadd address=192.168.88.249 client-id=1:14:4f:8a:c7:36:a2 mac-address=\ 14:4F:8A:/// server=defconf/ip dhcp-server networkadd address=10.10.10.0/24 gateway=10.10.10.10 netmask=24add address=192.168.88.0/24 comment=defconf dns-server=192.168.88.1 gateway=\ 192.168.88.1/ip dnsset allow-remote-requests=yes/ip dns staticadd address=192.168.88.1 comment=defconf name=router.lan/ip firewall filteradd action=accept chain=input comment="defconf: accept dstnat" \ connection-nat-state=dstnat in-interface=all-ethernetadd action=accept chain=input comment="accept icmpt" in-interface=\ all-ethernet protocol=icmpadd action=accept chain=input comment="accept tcp" in-interface=all-ethernet \ protocol=tcpadd action=accept chain=input comment=\ "defconf: accept established,related,untracked" connection-state=\ established,related,untrackedadd action=drop chain=input comment="defconf: drop invalid" connection-state=\ invalidadd action=accept chain=input comment=\ "defconf: accept to local loopback (for CAPsMAN)" dst-address=127.0.0.1add action=drop chain=input comment="defconf: drop all not coming from LAN" \ in-interface-list=!LANadd action=accept chain=forward comment="defconf: accept in ipsec policy" \ ipsec-policy=in,ipsecadd action=accept chain=forward comment="defconf: accept out ipsec policy" \ ipsec-policy=out,ipsecadd action=fasttrack-connection chain=forward comment="defconf: fasttrack" \ connection-state=established,related disabled=yesadd action=accept chain=forward comment=\ "defconf: accept established,related, untracked" connection-state=\ established,related,untrackedadd action=accept chain=forward comment=" accept new " connection-state=newadd action=drop chain=forward comment="defconf: drop invalid" \ connection-state=invalidadd action=drop chain=forward comment=\ "defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \ connection-state=new in-interface-list=WANadd action=accept chain=output connection-nat-state=dstnat dst-port=22 \ protocol=tcp/ip firewall natadd action=masquerade chain=srcnat comment="defconf: masquerade" \ ipsec-policy=out,none out-interface-list=WANadd action=dst-nat chain=dstnat dst-port=YYYY protocol=tcp to-addresses=\ 192.168.55.247 to-ports=2222add action=dst-nat chain=dstnat dst-port=ZZZZ in-interface=all-ethernet \ protocol=tcp to-addresses=192.168.55.228 to-ports=22/ip routeadd distance=1 dst-address=192.168.55.0/24 gateway=10.10.10.10/ip serviceset ssh address=0.0.0.0/0/system clockset time-zone-name=America/New_York/system identityset name=MikroTik-gw/tool mac-serverset allowed-interface-list=LAN/tool mac-server mac-winboxset allowed-interface-list=LAN/tool snifferset filter-interface=bridge filter-operator-between-entries=and filter-port=\ ssh
Statistics: Posted by ckonsultor — Fri Mar 29, 2024 9:03 pm
Statistics: Posted by TheCat12 — Fri Mar 29, 2024 8:35 pm
But they did. And they made one bad decision. They made a monolithic package for ARM WIFI AC devices, called "wifi-qcom-ac". All these AC devices, except Audience and RB4011, are 16MB flash ones. Still they decided to bundle the firmware for QCA9984 in this package (viewtopic.php?p=1065363#p1065363). There are 2 (!) devices that even have that chipset builtin: Audience and RB4011. Both of these have 128MB NAND storage -> and plenty of space for waste.Mikrotik could have not made a "wifi-qcom-ac" driver — which likely avoid all these discussions — and just suggested folks upgrade to AX models.
Statistics: Posted by infabo — Fri Mar 29, 2024 8:27 pm
Statistics: Posted by mkx — Fri Mar 29, 2024 8:25 pm
Statistics: Posted by patrikg — Fri Mar 29, 2024 8:22 pm
Statistics: Posted by Josephny — Fri Mar 29, 2024 8:20 pm
Statistics: Posted by Amm0 — Fri Mar 29, 2024 8:08 pm
Statistics: Posted by infabo — Fri Mar 29, 2024 8:03 pm
Statistics: Posted by infabo — Fri Mar 29, 2024 7:48 pm
Statistics: Posted by anav — Fri Mar 29, 2024 7:48 pm
Statistics: Posted by Amm0 — Fri Mar 29, 2024 7:27 pm
Statistics: Posted by Seko777 — Fri Mar 29, 2024 7:22 pm
Statistics: Posted by qatar2022 — Fri Mar 29, 2024 7:18 pm
Statistics: Posted by Josephny — Fri Mar 29, 2024 7:12 pm
Statistics: Posted by Josephny — Fri Mar 29, 2024 7:09 pm
Statistics: Posted by holvoetn — Fri Mar 29, 2024 7:02 pm
Statistics: Posted by anav — Fri Mar 29, 2024 7:02 pm
Statistics: Posted by anav — Fri Mar 29, 2024 6:58 pm
Statistics: Posted by anav — Fri Mar 29, 2024 6:56 pm
Statistics: Posted by Josephny — Fri Mar 29, 2024 6:54 pm
Statistics: Posted by holvoetn — Fri Mar 29, 2024 6:49 pm
Statistics: Posted by holvoetn — Fri Mar 29, 2024 6:42 pm
Statistics: Posted by Amm0 — Fri Mar 29, 2024 6:38 pm
unplug 1 minute. holding the reset and then plugin in power.Buttons and jumpers
RouterBOOT reset button has the following functions:
Hold the button before powering on the device, and at power-up, the button will force load the backup boot loader. Continue holding the button for the other two functions of this button.
Release the button when the green LED starts flashing, to reset the RouterOS configuration. To not load the backup boot loader, you can start holding the button after power is already applied.
Release the button after LED is no longer flashing (~20 seconds) to cause the device to look for Netinstall servers (required for reinstalling RouterOS over the network).
Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device. Useful for RouterBOOT debugging and recovery.
Statistics: Posted by ucdude — Fri Mar 29, 2024 6:32 pm
Statistics: Posted by Amm0 — Fri Mar 29, 2024 6:31 pm
Statistics: Posted by AtisE — Fri Mar 29, 2024 6:31 pm
Statistics: Posted by Amm0 — Fri Mar 29, 2024 6:26 pm
Statistics: Posted by holvoetn — Fri Mar 29, 2024 6:25 pm
Statistics: Posted by Amm0 — Fri Mar 29, 2024 6:21 pm
Getic does a poor job with product descriptions…. Check the link to see how they describe the RB5009The most recent MT item I bought through Amazon came from Getic, one of MT’s primary distributors, possibly even #1.
Statistics: Posted by holvoetn — Fri Mar 29, 2024 6:19 pm
Statistics: Posted by Josephny — Fri Mar 29, 2024 6:14 pm
/tool/fetch url=https://letsencrypt.org/certs/lets-encrypt-r3.txt/tool/fetch url=https://letsencrypt.org/certs/isrg-root-x1-cross-signed.txt/certificate/import file-name=isrg-root-x1-cross-signed.txt/certificate/import file-name=lets-encrypt-r3.txt
Statistics: Posted by monteverdi — Fri Mar 29, 2024 6:11 pm
Statistics: Posted by BartoszP — Fri Mar 29, 2024 6:08 pm
Statistics: Posted by Amm0 — Fri Mar 29, 2024 5:58 pm
Statistics: Posted by mkx — Fri Mar 29, 2024 5:46 pm
Statistics: Posted by Amm0 — Fri Mar 29, 2024 5:43 pm
Statistics: Posted by Seko777 — Fri Mar 29, 2024 5:40 pm
Statistics: Posted by mkx — Fri Mar 29, 2024 5:37 pm
Statistics: Posted by jaclaz — Fri Mar 29, 2024 5:22 pm
Statistics: Posted by sirbryan — Fri Mar 29, 2024 5:06 pm
Statistics: Posted by mozerd — Fri Mar 29, 2024 5:01 pm
Statistics: Posted by anav — Fri Mar 29, 2024 4:58 pm
Statistics: Posted by Amm0 — Fri Mar 29, 2024 4:58 pm
# 2RouterOS 7.14.1# ## model = RBD52G-5HacD2HnD# /interface bridgeadd ingress-filtering=no name=bridge1 vlan-filtering=yes/interface pppoe-clientadd add-default-route=yes disabled=no interface=ether1 name=pppoe-out1 \ use-peer-dns=yes user=/interface vlanadd interface=bridge1 name=vlan-ezio vlan-id=200add interface=bridge1 name=vlan-ufficio vlan-id=100/interface listadd name=WANadd name=LAN/ip pooladd name=dhcp_pool0 ranges=192.168.1.100-192.168.1.200add name=dhcp_pool1 ranges=10.0.0.100-10.0.0.200/ip dhcp-serveradd address-pool=dhcp_pool0 interface=vlan-ufficio name=dhcp1add address-pool=dhcp_pool1 interface=vlan-ezio name=dhcp2/queue typeadd fq-codel-limit=1000 fq-codel-quantum=300 fq-codel-target=12ms kind=fq-codel \ name=fq-codel/queue treeadd max-limit=30M name="Total Download" parent=bridge1 queue=fq-codeladd name="Other Traffic down" packet-mark=no-mark parent="Total Download" \ queue=fq-codeladd name=HyperBackup packet-mark=hyperbackup_packets parent="Total Download" \ priority=7 queue=fq-codeladd name=Ezio packet-mark=ezio_packets parent="Total Download" priority=6 \ queue=fq-codeladd name=Azienda packet-mark=azienda_packets parent="Total Download" priority=5 \ queue=fq-codeladd name=VoIP packet-mark=VoIP_packets parent="Total Download" priority=1 \ queue=fq-codeladd max-limit=3M name="Total Upload" parent=pppoe-out1 queue=fq-codeladd name=VoIP_Up packet-mark=VoIP_packets parent="Total Upload" priority=1 \ queue=fq-codeladd name=Azienda_Up packet-mark=azienda_packets parent="Total Upload" priority=\ 5 queue=fq-codeladd name=Ezio_Up packet-mark=ezio_packets parent="Total Upload" priority=6 \ queue=fq-codeladd name=Hyperbackup_Upload packet-mark=hyperbackup_packets parent=\ "Total Upload" priority=7 queue=fq-codeladd name="Other Traffic Upload" packet-mark=no-mark parent="Total Upload" \ queue=fq-codel/ip addressadd address=192.168.1.1/24 interface=vlan-ufficio network=192.168.1.0add address=10.0.0.1/24 interface=vlan-ezio network=10.0.0.0/ip dhcp-server networkadd address=10.0.0.0/24 dns-server=10.0.0.1 gateway=10.0.0.1add address=192.168.1.0/24 dns-server=192.168.1.1 gateway=192.168.1.1/ip firewall mangleadd action=mark-connection chain=forward comment="VoIP Conn" dst-address-list=\ VoipVoice new-connection-mark=VoIP_conn passthrough=yes src-address-list=\ LANadd action=mark-connection chain=forward dst-address-list=LAN \ new-connection-mark=VoIP_conn passthrough=yes src-address-list=VoipVoiceadd action=mark-packet chain=forward comment="VoIP Packets" connection-mark=\ VoIP_conn new-packet-mark=VoIP_packets passthrough=noadd action=mark-connection chain=forward comment="Hyper Backup Conn" \ dst-address=***** dst-port=61281 new-connection-mark=\ hyperbackup_conn out-interface=pppoe-out1 passthrough=yes protocol=tcpadd action=mark-packet chain=forward comment="Hyper Backup Packets" \ connection-mark=hyperbackup_conn new-packet-mark=hyperbackup_packets \ passthrough=noadd action=mark-connection chain=forward comment="Azienda Conn" \ new-connection-mark=azienda_conn out-interface=pppoe-out1 passthrough=yes \ src-address=192.168.1.0/24add action=mark-packet chain=forward comment="Azienda Packets" connection-mark=\ azienda_conn new-packet-mark=azienda_packets passthrough=noadd action=mark-connection chain=forward comment="Ezio Conn" \ new-connection-mark=ezio_conn out-interface=pppoe-out1 passthrough=yes \ src-address=10.0.0.0/24add action=mark-packet chain=forward comment="Ezio Packets" connection-mark=\ ezio_conn new-packet-mark=ezio_packets passthrough=no
Statistics: Posted by simonefil — Fri Mar 29, 2024 4:55 pm