Statistics: Posted by mman1982 — Tue Apr 02, 2024 5:08 pm
Statistics: Posted by Larsa — Tue Apr 02, 2024 5:04 pm
Statistics: Posted by andrep — Tue Apr 02, 2024 4:51 pm
/interface vlan...add interface=Dave name=Security vlan-id=200.../ip firewall filter...add action=drop chain=forward comment="Block internet security" \ out-interface="Bell PPPoE" src-address-list=Security...
Statistics: Posted by Chouby — Tue Apr 02, 2024 4:51 pm
Statistics: Posted by Larsa — Tue Apr 02, 2024 4:43 pm
Statistics: Posted by clambert — Tue Apr 02, 2024 4:33 pm
Statistics: Posted by 0xAA55 — Tue Apr 02, 2024 4:20 pm
Statistics: Posted by infabo — Tue Apr 02, 2024 4:16 pm
Statistics: Posted by StupidProgrammer — Tue Apr 02, 2024 4:06 pm
Statistics: Posted by jaxed7 — Tue Apr 02, 2024 3:54 pm
Statistics: Posted by mozerd — Tue Apr 02, 2024 3:51 pm
Statistics: Posted by korg — Tue Apr 02, 2024 3:45 pm
$ iperf3 -c host1.mydomain.example -t30 -i30 -P5 -6Connecting to host host1.mydomain.example, port 5201[ 5] local fdfd::a00:a00:27ff:fe60:e32e port 46804 connected to fdfd:0:0:a00::abcd port 5201[ 7] local fdfd::a00:a00:27ff:fe60:e32e port 46820 connected to fdfd:0:0:a00::abcd port 5201[ 9] local fdfd::a00:a00:27ff:fe60:e32e port 46830 connected to fdfd:0:0:a00::abcd port 5201[ 11] local fdfd::a00:a00:27ff:fe60:e32e port 46838 connected to fdfd:0:0:a00::abcd port 5201[ 13] local fdfd::a00:a00:27ff:fe60:e32e port 46846 connected to fdfd:0:0:a00::abcd port 5201[ ID] Interval Transfer Bitrate Retr Cwnd[ 5] 0.00-30.00 sec 4.98 GBytes 1.43 Gbits/sec 1417 653 KBytes [ 7] 0.00-30.00 sec 5.82 GBytes 1.67 Gbits/sec 1923 700 KBytes [ 9] 0.00-30.00 sec 5.37 GBytes 1.54 Gbits/sec 1624 544 KBytes [ 11] 0.00-30.00 sec 4.99 GBytes 1.43 Gbits/sec 2301 718 KBytes [ 13] 0.00-30.00 sec 5.90 GBytes 1.69 Gbits/sec 2073 502 KBytes [SUM] 0.00-30.00 sec 27.1 GBytes 7.75 Gbits/sec 9338 - - - - - - - - - - - - - - - - - - - - - - - - -[ ID] Interval Transfer Bitrate Retr[ 5] 0.00-30.00 sec 4.98 GBytes 1.43 Gbits/sec 1417 sender[ 5] 0.00-30.03 sec 4.98 GBytes 1.42 Gbits/sec receiver[ 7] 0.00-30.00 sec 5.82 GBytes 1.67 Gbits/sec 1923 sender[ 7] 0.00-30.03 sec 5.81 GBytes 1.66 Gbits/sec receiver[ 9] 0.00-30.00 sec 5.37 GBytes 1.54 Gbits/sec 1624 sender[ 9] 0.00-30.03 sec 5.37 GBytes 1.54 Gbits/sec receiver[ 11] 0.00-30.00 sec 4.99 GBytes 1.43 Gbits/sec 2301 sender[ 11] 0.00-30.03 sec 4.98 GBytes 1.43 Gbits/sec receiver[ 13] 0.00-30.00 sec 5.90 GBytes 1.69 Gbits/sec 2073 sender[ 13] 0.00-30.03 sec 5.90 GBytes 1.69 Gbits/sec receiver[SUM] 0.00-30.00 sec 27.1 GBytes 7.75 Gbits/sec 9338 sender[SUM] 0.00-30.03 sec 27.0 GBytes 7.73 Gbits/sec receiveriperf Done.
$ iperf3 -c host1.mydomain.example -t30 -i30 -P5 -4Connecting to host host1.mydomain.example, port 5201[ 5] local 10.10.11.143 port 33874 connected to 10.10.10.213 port 5201[ 7] local 10.10.11.143 port 33888 connected to 10.10.10.213 port 5201[ 9] local 10.10.11.143 port 33890 connected to 10.10.10.213 port 5201[ 11] local 10.10.11.143 port 33892 connected to 10.10.10.213 port 5201[ 13] local 10.10.11.143 port 33896 connected to 10.10.10.213 port 5201[ ID] Interval Transfer Bitrate Retr Cwnd[ 5] 0.00-30.00 sec 2.24 GBytes 641 Mbits/sec 18934 49.5 KBytes [ 7] 0.00-30.00 sec 1.61 GBytes 462 Mbits/sec 16267 73.5 KBytes [ 9] 0.00-30.00 sec 1.87 GBytes 537 Mbits/sec 16611 24.0 KBytes [ 11] 0.00-30.00 sec 1.67 GBytes 477 Mbits/sec 16438 58.0 KBytes [ 13] 0.00-30.00 sec 1.59 GBytes 457 Mbits/sec 16502 38.2 KBytes [SUM] 0.00-30.00 sec 8.99 GBytes 2.57 Gbits/sec 84752 - - - - - - - - - - - - - - - - - - - - - - - - -[ ID] Interval Transfer Bitrate Retr[ 5] 0.00-30.00 sec 2.24 GBytes 641 Mbits/sec 18934 sender[ 5] 0.00-30.03 sec 2.24 GBytes 640 Mbits/sec receiver[ 7] 0.00-30.00 sec 1.61 GBytes 462 Mbits/sec 16267 sender[ 7] 0.00-30.03 sec 1.61 GBytes 461 Mbits/sec receiver[ 9] 0.00-30.00 sec 1.87 GBytes 537 Mbits/sec 16611 sender[ 9] 0.00-30.03 sec 1.87 GBytes 536 Mbits/sec receiver[ 11] 0.00-30.00 sec 1.67 GBytes 477 Mbits/sec 16438 sender[ 11] 0.00-30.03 sec 1.66 GBytes 476 Mbits/sec receiver[ 13] 0.00-30.00 sec 1.59 GBytes 457 Mbits/sec 16502 sender[ 13] 0.00-30.03 sec 1.59 GBytes 456 Mbits/sec receiver[SUM] 0.00-30.00 sec 8.99 GBytes 2.57 Gbits/sec 84752 sender[SUM] 0.00-30.03 sec 8.98 GBytes 2.57 Gbits/sec receiveriperf Done.
$ iperf3 -c host1.mydomain.example -t30 -i30 -P5 -6 -RConnecting to host host1.mydomain.example, port 5201Reverse mode, remote host host1.mydomain.example is sending[ 5] local fdfd::a00:a00:27ff:fe60:e32e port 39440 connected to fdfd:0:0:a00::abcd port 5201[ 7] local fdfd::a00:a00:27ff:fe60:e32e port 39456 connected to fdfd:0:0:a00::abcd port 5201[ 9] local fdfd::a00:a00:27ff:fe60:e32e port 39458 connected to fdfd:0:0:a00::abcd port 5201[ 11] local fdfd::a00:a00:27ff:fe60:e32e port 39474 connected to fdfd:0:0:a00::abcd port 5201[ 13] local fdfd::a00:a00:27ff:fe60:e32e port 39488 connected to fdfd:0:0:a00::abcd port 5201[ ID] Interval Transfer Bitrate Retr Cwnd[ 5] 0.00-30.00 sec 5.19 GBytes 1.48 Gbits/sec [ 7] 0.00-30.00 sec 5.09 GBytes 1.46 Gbits/sec [ 9] 0.00-30.00 sec 5.08 GBytes 1.46 Gbits/sec [ 11] 0.00-30.00 sec 5.16 GBytes 1.48 Gbits/sec [ 13] 0.00-30.00 sec 5.09 GBytes 1.46 Gbits/sec [SUM] 0.00-30.00 sec 25.6 GBytes 7.33 Gbits/sec - - - - - - - - - - - - - - - - - - - - - - - - -[ ID] Interval Transfer Bitrate Retr[ 5] 0.00-30.03 sec 5.20 GBytes 1.49 Gbits/sec 107 sender[ 5] 0.00-30.00 sec 5.19 GBytes 1.48 Gbits/sec receiver[ 7] 0.00-30.03 sec 5.10 GBytes 1.46 Gbits/sec 626 sender[ 7] 0.00-30.00 sec 5.09 GBytes 1.46 Gbits/sec receiver[ 9] 0.00-30.03 sec 5.10 GBytes 1.46 Gbits/sec 142 sender[ 9] 0.00-30.00 sec 5.08 GBytes 1.46 Gbits/sec receiver[ 11] 0.00-30.03 sec 5.10 GBytes 1.46 Gbits/sec 314 sender[ 11] 0.00-30.00 sec 5.16 GBytes 1.48 Gbits/sec receiver[ 13] 0.00-30.03 sec 5.17 GBytes 1.48 Gbits/sec 7 sender[ 13] 0.00-30.00 sec 5.09 GBytes 1.46 Gbits/sec receiver[SUM] 0.00-30.03 sec 25.7 GBytes 7.34 Gbits/sec 1196 sender[SUM] 0.00-30.00 sec 25.6 GBytes 7.33 Gbits/sec receiveriperf Done.
$ iperf3 -c host1.mydomain.example -t30 -i30 -P5 -4 -RConnecting to host host1.mydomain.example, port 5201Reverse mode, remote host host1.mydomain.example is sending[ 5] local 10.10.11.143 port 59334 connected to 10.10.10.213 port 5201[ 7] local 10.10.11.143 port 59340 connected to 10.10.10.213 port 5201[ 9] local 10.10.11.143 port 59342 connected to 10.10.10.213 port 5201[ 11] local 10.10.11.143 port 59350 connected to 10.10.10.213 port 5201[ 13] local 10.10.11.143 port 59356 connected to 10.10.10.213 port 5201[ ID] Interval Transfer Bitrate Retr Cwnd[ 5] 0.00-30.00 sec 1.99 GBytes 570 Mbits/sec [ 7] 0.00-30.00 sec 2.02 GBytes 578 Mbits/sec [ 9] 0.00-30.00 sec 1.99 GBytes 570 Mbits/sec [ 11] 0.00-30.00 sec 2.01 GBytes 576 Mbits/sec [ 13] 0.00-30.00 sec 2.01 GBytes 576 Mbits/sec [SUM] 0.00-30.00 sec 10.0 GBytes 2.87 Gbits/sec - - - - - - - - - - - - - - - - - - - - - - - - -[ ID] Interval Transfer Bitrate Retr[ 5] 0.00-30.03 sec 1.99 GBytes 570 Mbits/sec 9278 sender[ 5] 0.00-30.00 sec 1.99 GBytes 570 Mbits/sec receiver[ 7] 0.00-30.03 sec 2.02 GBytes 579 Mbits/sec 9186 sender[ 7] 0.00-30.00 sec 2.02 GBytes 578 Mbits/sec receiver[ 9] 0.00-30.03 sec 2.00 GBytes 571 Mbits/sec 9067 sender[ 9] 0.00-30.00 sec 1.99 GBytes 570 Mbits/sec receiver[ 11] 0.00-30.03 sec 2.02 GBytes 577 Mbits/sec 9239 sender[ 11] 0.00-30.00 sec 2.01 GBytes 576 Mbits/sec receiver[ 13] 0.00-30.03 sec 2.01 GBytes 576 Mbits/sec 10164 sender[ 13] 0.00-30.00 sec 2.01 GBytes 576 Mbits/sec receiver[SUM] 0.00-30.03 sec 10.0 GBytes 2.87 Gbits/sec 46934 sender[SUM] 0.00-30.00 sec 10.0 GBytes 2.87 Gbits/sec receiveriperf Done.
Statistics: Posted by burnduck — Tue Apr 02, 2024 3:45 pm
Statistics: Posted by buset1974 — Tue Apr 02, 2024 3:41 pm
Statistics: Posted by Amm0 — Tue Apr 02, 2024 3:40 pm
Statistics: Posted by korg — Tue Apr 02, 2024 3:27 pm
Statistics: Posted by korg — Tue Apr 02, 2024 3:26 pm
Statistics: Posted by Amm0 — Tue Apr 02, 2024 3:25 pm
Statistics: Posted by mantouboji — Tue Apr 02, 2024 3:20 pm
Statistics: Posted by 3eff — Tue Apr 02, 2024 3:17 pm
Statistics: Posted by mkx — Tue Apr 02, 2024 3:17 pm
Statistics: Posted by infabo — Tue Apr 02, 2024 3:11 pm
I think he's talking about the multicast helper which is in the Wireless (and CAPSMAN) system which does multicast to unicast conversion at the radio interface. It's needed to make things like mDNS and DHCP more reliable and also allow for use of VLANs with wireless clients. I am surprised it doesn't exist in WifiWave2.
Search for it in https://help.mikrotik.com/docs/display/ ... +Interface
So yeah, FTOMs what's the go with multicast to unicast conversion in WifiWave2? Does it exist in some other form?
Statistics: Posted by mman1982 — Tue Apr 02, 2024 3:06 pm
Statistics: Posted by infabo — Tue Apr 02, 2024 3:02 pm
Statistics: Posted by pellerb — Tue Apr 02, 2024 2:55 pm
Statistics: Posted by anav — Tue Apr 02, 2024 2:42 pm
Are you sure your (R/M)STP works properly? Maybe you should check bridge port status for this port and check which bridge is indicated as root bridge. If root bridge is not detected properly there might be a need to tune STP priority for bridges...
I have an RB5009 where I've started noticing it randomly stop talking to devices on one of the ports. It takes a reboot to fix it. No amount of port-bouncing or bridge tinkering works. I suspect it's seeing occasional route loops or some other packet it doesn't like and it silently shuts down the port. It usually happens if I've been messing physically with a device directly connected or downstream of the failing port. Noticed it on 7.11.2, still happens (very rarely) on 7.13.5.
Statistics: Posted by sirbryan — Tue Apr 02, 2024 2:42 pm
Statistics: Posted by ygrecki — Tue Apr 02, 2024 2:42 pm
Except they did just this with VRFs and firewall rules. Existing firewall configs are now broken that reference L3 input interfaces attached to a VRF.
Mikrotik has "general rule" about not touching existing configs, except during major upgrades where a config update is necessary. Usually, changing connection tracking settings falls under that "not a major upgrade" category.
Statistics: Posted by sirbryan — Tue Apr 02, 2024 2:37 pm
Statistics: Posted by vovan700i — Tue Apr 02, 2024 2:32 pm
# apr/02/2024 10:53:30 by RouterOS 7.9.1# software id = #/interface bridgeadd name=bridge1/interface wireguardadd listen-port=13299 mtu=1420 name=wireguard1/interface wireless security-profilesset [ find default=yes ] supplicant-identity=MikroTik/ip pooladd name=dhcp_pool0 ranges=10.10.100.1-10.10.100.253/ip dhcp-serveradd address-pool=dhcp_pool0 interface=bridge1 name=dhcp1/portset 0 name=serial0/interface bridge portadd bridge=bridge1 interface=ether2add bridge=bridge1 interface=ether3add bridge=bridge1 interface=ether4add bridge=bridge1 interface=ether5add bridge=bridge1 interface=ether6/interface wireguard peersadd allowed-address=0.0.0.0/0 endpoint-address=192.168.216.135 endpoint-port=\ 13299 interface=wireguard1 public-key=\ "sdfdsfsdfsd"add allowed-address=0.0.0.0/0 endpoint-address=192.168.216.138 endpoint-port=\ 13299 interface=wireguard1 public-key=\ "sdfdsfsdfsd="add allowed-address=0.0.0.0/0 endpoint-address=192.168.216.136 endpoint-port=\ 13299 interface=wireguard1 public-key=\ "sdfdsfsdfsd="/ip addressadd address=10.10.100.254/24 interface=bridge1 network=10.10.100.0add address=172.16.0.100/24 interface=wireguard1 network=172.16.0.0/ip dhcp-clientadd interface=ether1/ip dhcp-server networkadd address=10.10.100.0/24 gateway=10.10.100.254/ip firewall filteradd action=accept chain=input disabled=yes dst-port=13299 protocol=udp \ src-port=""/ip routeadd comment="Connection to xy" disabled=no distance=1 dst-address=\ 10.20.100.0/24 gateway=wireguard1 pref-src="" routing-table=main scope=30 \ suppress-hw-offload=no target-scope=10add comment="connection to zy" disabled=no distance=1 dst-address=\ 10.30.100.0/24 gateway=wireguard1 pref-src="" routing-table=main scope=30 \ suppress-hw-offload=no target-scope=10add disabled=no dst-address=10.40.100.0/24 gateway=wireguard1 routing-table=\ main suppress-hw-offload=no/system identityset name="MT SPINE WG"/system noteset show-at-login=no
# apr/02/2024 10:53:44 by RouterOS 7.9.1# software id = #/interface bridgeadd name=bridge1/interface wireguardadd listen-port=13299 mtu=1420 name=wireguard1/interface wireless security-profilesset [ find default=yes ] supplicant-identity=MikroTik/ip pooladd name=dhcp_pool0 ranges=10.20.100.1-10.20.100.253/ip dhcp-serveradd address-pool=dhcp_pool0 interface=bridge1 name=dhcp1/portset 0 name=serial0/interface bridge portadd bridge=bridge1 interface=ether2add bridge=bridge1 interface=ether3add bridge=bridge1 interface=ether4/interface wireguard peersadd allowed-address=0.0.0.0/0 endpoint-address=192.168.216.137 endpoint-port=\ 13299 interface=wireguard1 public-key=\ "papapapaapa"/ip addressadd address=10.20.100.254/24 interface=bridge1 network=10.20.100.0add address=172.16.0.200/24 interface=wireguard1 network=172.16.0.0/ip dhcp-clientadd interface=ether1/ip dhcp-server networkadd address=10.20.100.0/24 gateway=10.20.100.254/ip firewall filteradd action=accept chain=input dst-port=13299 protocol=tcp/ip routeadd disabled=no distance=1 dst-address=10.10.100.0/24 gateway=wireguard1 \ pref-src="" routing-table=main scope=30 suppress-hw-offload=no \ target-scope=10/system identityset name="MT Leaf1 WG"/system noteset show-at-login=no
# apr/02/2024 10:53:56 by RouterOS 7.9.1# software id = #/interface bridgeadd name=bridge1/interface wireguardadd listen-port=13299 mtu=1420 name=wireguard1/interface wireless security-profilesset [ find default=yes ] supplicant-identity=MikroTik/ip pooladd name=dhcp_pool1 ranges=10.30.100.1-10.30.100.253/ip dhcp-serveradd address-pool=dhcp_pool1 interface=bridge1 name=dhcp1 /portset 0 name=serial0/interface bridge portadd bridge=bridge1 interface=ether2add bridge=bridge1 interface=ether3add bridge=bridge1 interface=ether4/interface wireguard peersadd allowed-address=0.0.0.0/0 endpoint-address=10.10.100.254 endpoint-port=\ 13299 interface=wireguard1 public-key=\ "bkakakakakaa"/ip addressadd address=10.30.100.254/24 interface=bridge1 network=10.30.100.0add address=172.16.0.110/24 interface=wireguard1 network=172.16.0.0/ip dhcp-clientadd interface=ether1/ip dhcp-server networkadd address=10.30.100.0/24 gateway=10.30.100.254/ip firewall filteradd action=accept chain=input dst-port=13299 protocol=udp/ip routeadd disabled=no dst-address=10.10.100.0/24 gateway=wireguard1 routing-table=\ main suppress-hw-offload=no/system identityset name="MT Leaf2 WG"/system noteset show-at-login=no
Statistics: Posted by korg — Tue Apr 02, 2024 2:05 pm
Statistics: Posted by StupidProgrammer — Tue Apr 02, 2024 2:00 pm
Statistics: Posted by igorr29 — Tue Apr 02, 2024 1:56 pm
Statistics: Posted by quackyo — Tue Apr 02, 2024 1:48 pm
:foreach i in=[/interface/wireguard/peers/find where disabled=no endpoint-address~"[a-z]\$"] do={ :local LastHandshake [/interface/wireguard/peers/get $i last-handshake] :if (([:tostr $LastHandshake] = "") or ($LastHandshake > [:totime "5m"])) do={ :log info "WG-iface-restart script found WG peers with last handshake greater than 5 minutes; then reset the endpoint-address to reload dns of endpoint" /interface/wireguard/peers/set $i endpoint-address=[/interface/wireguard/peers/get $i endpoint-address] :local endpoint [/interface/wireguard/peers/get $i endpoint-address] :log info "WG-iface-restart script found WG peer with last handshake greater than 5 minutes; then reset the endpoint-address to reload dns of endpoint: $endpoint" }}
Statistics: Posted by Josephny — Tue Apr 02, 2024 1:37 pm
Statistics: Posted by rpingar — Tue Apr 02, 2024 1:24 pm
Most important are the stuff in Bold. If that is wrong or missing, stuff does not work.script,info serial=75B70647AAAA MikroTik: .id=*5;activity=;blocked=false;bytes-down=0;bytes-up=0;disabled=false;dynamic=true;inactive=false;ip-address=192.168.10.241;limited=false;mac-address=D8:9E:CC:CC:CC:10;name=;rate-down=0;rate-up=0;script=kids;user=
Statistics: Posted by Jotne — Tue Apr 02, 2024 1:18 pm
Statistics: Posted by nz_monkey — Tue Apr 02, 2024 1:16 pm
Statistics: Posted by lodex — Tue Apr 02, 2024 12:55 pm
Statistics: Posted by nmt1900 — Tue Apr 02, 2024 12:52 pm
Statistics: Posted by godel0914 — Tue Apr 02, 2024 12:29 pm
Mikrotik has "general rule" about not touching existing configs, except during major upgrades where a config update is necessary. Usually, changing connection tracking settings falls under that "not a major upgrade" category.Well, among other things I just found and fixed the UDP timeout (which is amazing, Mikrotik changing it for new setups but not changing it for existing installations where the user has not changed the default value - talk about breaking systems) which fixed SOME of the issues (RDP it seems).
Now I just read about some MTU trickery broken that "we are not going to fix because we plan to fix it in 7.15" which may well be it.
Given those I am really out of ideas. This is a setup that has been working flawlessly the last years, now I get significant issues down to PING not working over this one router to all machines (which change randomly after hours).
Statistics: Posted by Archous — Tue Apr 02, 2024 12:26 pm
Statistics: Posted by saktie — Tue Apr 02, 2024 12:10 pm
Indeed! As far as I compared, compressed sizes of NPK (main package, wifi-qcom-ac) are nearly comparable to 7.13.x again. Looks promising! Thanks Mikrotik for taking all issue reports on the space-topic seriously!*) system - general work on optimizing the size of RouterOS packages;
Statistics: Posted by infabo — Tue Apr 02, 2024 12:08 pm
Statistics: Posted by kniksc — Tue Apr 02, 2024 12:08 pm
Statistics: Posted by godel0914 — Tue Apr 02, 2024 11:54 am
Statistics: Posted by EdPa — Tue Apr 02, 2024 11:46 am
Statistics: Posted by nz_monkey — Tue Apr 02, 2024 11:41 am
/ip dhcp-server lease add address=SOME_IP_HERE mac-address=SOME_MAC_HERE server=main
Statistics: Posted by kekraiser — Tue Apr 02, 2024 11:36 am
Statistics: Posted by normis — Tue Apr 02, 2024 11:22 am
Statistics: Posted by mkx — Tue Apr 02, 2024 11:20 am
Statistics: Posted by Shambler — Tue Apr 02, 2024 11:17 am
Statistics: Posted by kekraiser — Tue Apr 02, 2024 11:14 am
Statistics: Posted by mkx — Tue Apr 02, 2024 10:40 am
/interface/bridge/host/print where vid=<vlan id>
/interface/ethernet/switch/host/print where vlan-id=<vlan id>
Statistics: Posted by mkx — Tue Apr 02, 2024 10:35 am
Statistics: Posted by normis — Tue Apr 02, 2024 10:32 am
Statistics: Posted by andressis2k — Tue Apr 02, 2024 10:18 am
Statistics: Posted by BlackVS — Tue Apr 02, 2024 10:00 am
Iam trying to look at "Log" tool (for each AP), but there is nothing interested, and no any attempts to device connection. Is there any other wireless log present?include the wireless logs when the device attempts connection
Statistics: Posted by kekraiser — Tue Apr 02, 2024 10:00 am
Statistics: Posted by patrikg — Tue Apr 02, 2024 9:55 am
Statistics: Posted by godel0914 — Tue Apr 02, 2024 9:50 am
Statistics: Posted by An5teifo — Tue Apr 02, 2024 9:42 am
Statistics: Posted by saktie — Tue Apr 02, 2024 9:38 am
Statistics: Posted by tangent — Tue Apr 02, 2024 9:37 am
That isn't a question..Question 2. Fan connector in the front of fan... it is weird
Statistics: Posted by BlackVS — Tue Apr 02, 2024 9:33 am
Statistics: Posted by An5teifo — Tue Apr 02, 2024 9:33 am
Statistics: Posted by normis — Tue Apr 02, 2024 9:31 am
Statistics: Posted by mkx — Tue Apr 02, 2024 9:24 am
Statistics: Posted by mkx — Tue Apr 02, 2024 9:17 am
Statistics: Posted by An5teifo — Tue Apr 02, 2024 9:14 am
Statistics: Posted by normis — Tue Apr 02, 2024 9:14 am
Statistics: Posted by kekraiser — Tue Apr 02, 2024 9:11 am
:global MtmTools;:set ($MtmTools->"hashing") $s;
/system/script/environment/print
Statistics: Posted by merlinthemagic7 — Tue Apr 02, 2024 9:07 am
Statistics: Posted by mkx — Tue Apr 02, 2024 9:06 am
As I already wrote, you CANNOT connect a RB941 to a new AP using station-pseudobridge. That means you CANNOT put the WiFi in the bridge.Thank you. When i changed mode on RB941 from B/G to B/G/N it connected to WiFi. Then i had problem because RB941 didn't want to get IP from DHCP. Then it got IP but i didn't get IP on my laptop that was connected to RB941 even i connected to ether port that was in the same bridge as WiFi.
You would need to buy at least a hAP ax2.Maybe the solution is to buy some news HAP's?
Statistics: Posted by tookiehr — Tue Apr 02, 2024 8:49 am