# Hardware

**URL:** https://forum.mikrotik.com/c/hardware/7.md?page=2

[Latest](https://forum.mikrotik.com/latest.md) · [Categories](https://forum.mikrotik.com/categories.md) · [Tags](https://forum.mikrotik.com/tags.md)

**Page:** 3

---

## [Hap be3 Media CPU temperature](https://forum.mikrotik.com/t/hap-be3-media-cpu-temperature/271737)

<div class="topic-metadata">

**Author:** [@xRadio](https://forum.mikrotik.com/u/xRadio)\
**Replies:** 116\
**Last updated:** [October 29, 2026, 2:03pm UTC](https://forum.mikrotik.com/t/hap-be3-media-cpu-temperature/271737 "2026-10-29T14:03:57Z")

</div>

Idle -73° If Cpu Load 3-6% CPU temperature 79-80°. Router box hot. It\`s good?

---

## [CCR1072-1G-8S+ dead](https://forum.mikrotik.com/t/ccr1072-1g-8s-dead/274095)

<div class="topic-metadata">

**Author:** [@erfanmir](https://forum.mikrotik.com/u/erfanmir)\
**Replies:** 3\
**Last updated:** [October 29, 2026, 12:12pm UTC](https://forum.mikrotik.com/t/ccr1072-1g-8s-dead/274095 "2026-10-29T12:12:14Z")

</div>

Hello, I have a CCR1072-1G-8S+ that shows no sign of life at power-on. I removed the SPI NOR (Winbond W25X40, 512 KB) and read it with a programmer. The size is exactly 524288 bytes, and the read is consistent: the last…

---

## [New home hardware setup, starting with RB5009 but need AP suggestions](https://forum.mikrotik.com/t/new-home-hardware-setup-starting-with-rb5009-but-need-ap-suggestions/274058)

<div class="topic-metadata">

**Author:** [@Johnster001](https://forum.mikrotik.com/u/Johnster001)\
**Replies:** 22\
**Last updated:** [October 28, 2026, 9:23am UTC](https://forum.mikrotik.com/t/new-home-hardware-setup-starting-with-rb5009-but-need-ap-suggestions/274058 "2026-10-28T09:23:23Z")

</div>

I'm replacing my current hAP ac2 as my primary router with an RB5009UG +S+I and am thinking of replacing my current AP's, which are TP-Link EAP225s. I want to move away from TP-Link and obviously going to MT APs like th…

---

## [Ccr2004 disabled the reset button, causing the device fan to spin wildly, and the system to seek help](https://forum.mikrotik.com/t/ccr2004-disabled-the-reset-button-causing-the-device-fan-to-spin-wildly-and-the-system-to-seek-help/274092)

<div class="topic-metadata">

**Author:** [@shyl1](https://forum.mikrotik.com/u/shyl1)\
**Replies:** 7\
**Last updated:** [October 27, 2026, 3:51pm UTC](https://forum.mikrotik.com/t/ccr2004-disabled-the-reset-button-causing-the-device-fan-to-spin-wildly-and-the-system-to-seek-help/274092 "2026-10-27T15:51:49Z")

</div>

I have enabled the command /system/routerboard/reset-button/set enabled=no, but the fan keeps spinning wildly, and I cannot access the system. Resetting does not work, and Netinstall cannot find the device even after fol…

---

## [Hex S (2025) not working with SFP](https://forum.mikrotik.com/t/hex-s-2025-not-working-with-sfp/273183)

<div class="topic-metadata">

**Author:** [@NetworkPierogi](https://forum.mikrotik.com/u/NetworkPierogi)\
**Replies:** 5\
**Last updated:** [October 26, 2026, 11:14pm UTC](https://forum.mikrotik.com/t/hex-s-2025-not-working-with-sfp/273183 "2026-10-26T23:14:40Z")

</div>

Hey all. Been working on my first proper home network build-out, and I've been running into an issue with SFP on the Hex S. In short, I've been attempting to connect a Netgear CM3000 via Ethernet to the Hex S via SFP (F…

---

## [CRS804-4DDQ Inconsistent Cage Behavior](https://forum.mikrotik.com/t/crs804-4ddq-inconsistent-cage-behavior/272832)

<div class="topic-metadata">

**Author:** [@pivotal8ytes](https://forum.mikrotik.com/u/pivotal8ytes)\
**Replies:** 8\
**Last updated:** [October 26, 2026, 5:37pm UTC](https://forum.mikrotik.com/t/crs804-4ddq-inconsistent-cage-behavior/272832 "2026-10-26T17:37:24Z")

</div>

Before I part with this CRS804-4DDQ, does anyone have a practical fix for one cage (out of 4) failing only with DGX Spark over passive DAC? I’m considering selling my MikroTik CRS804-4DDQ because I could not get all fou…

---

## [Is Mikrotik good option for my needs? (second, is Hex Pro vaporware?)](https://forum.mikrotik.com/t/is-mikrotik-good-option-for-my-needs-second-is-hex-pro-vaporware/274008)

<div class="topic-metadata">

**Author:** [@ChiEngDa](https://forum.mikrotik.com/u/ChiEngDa)\
**Replies:** 12\
**Last updated:** [October 25, 2026, 1:29pm UTC](https://forum.mikrotik.com/t/is-mikrotik-good-option-for-my-needs-second-is-hex-pro-vaporware/274008 "2026-10-25T13:29:01Z")

</div>

Greetings what I have (built roughly around 2018) Hex RouterBOARD 750G r3 router (original ISP was \<1 Gb) Brocade ICX 7250 ( 8 x 10Gbpe SFP+ and 48 1 Gbe ports) as primary switch . all of my key devices (3 proxmox…

---

## [SXTsq Embedded LTE4 Global AT&T compatability](https://forum.mikrotik.com/t/sxtsq-embedded-lte4-global-at-t-compatability/273964)

<div class="topic-metadata">

**Author:** [@ezkhctech](https://forum.mikrotik.com/u/ezkhctech)\
**Replies:** 8\
**Last updated:** [October 24, 2026, 6:29pm UTC](https://forum.mikrotik.com/t/sxtsq-embedded-lte4-global-at-t-compatability/273964 "2026-10-24T18:29:35Z")

</div>

I just ordered a SXTsq Embedded LTE4 Global and attempted to get the device activated on our AT&T business account. After providing the IMEI they told me the device is not compatible with the Business Air Internet servic…

---

## [HW Suggestion: Switch with x009 form factor](https://forum.mikrotik.com/t/hw-suggestion-switch-with-x009-form-factor/168165)

<div class="topic-metadata">

**Author:** [@5nik](https://forum.mikrotik.com/u/5nik)\
**Replies:** 10\
**Last updated:** [October 24, 2026, 5:13pm UTC](https://forum.mikrotik.com/t/hw-suggestion-switch-with-x009-form-factor/168165 "2026-10-24T17:13:54Z")

</div>

It would be nice to have ROS (based on CRS3xx) switch with same form factor to combine with L009 or RB5009 in (10"/19") rack.

---

## [SFP Module Unresponsive After Reboot](https://forum.mikrotik.com/t/sfp-module-unresponsive-after-reboot/272514)

<div class="topic-metadata">

**Author:** [@beiphahl](https://forum.mikrotik.com/u/beiphahl)\
**Replies:** 19\
**Last updated:** [October 23, 2026, 8:08pm UTC](https://forum.mikrotik.com/t/sfp-module-unresponsive-after-reboot/272514 "2026-10-23T20:08:29Z")

</div>

Hello, I have been experiencing a new problem I believe since upgrading to routeros 7.23 that still occurs after the latest upgrade to 7.24. Specifically, I have a hAP ax S router with a SFP fiber module (Leox LXT-010S…

---

## [RB951Ui-2HnD PoE-out issue (was: Powering mAP lite from RB951Ui-2HnD)](https://forum.mikrotik.com/t/rb951ui-2hnd-poe-out-issue-was-powering-map-lite-from-rb951ui-2hnd/166440)

<div class="topic-metadata">

**Author:** [@bderleta](https://forum.mikrotik.com/u/bderleta)\
**Replies:** 11\
**Last updated:** [October 23, 2026, 4:10pm UTC](https://forum.mikrotik.com/t/rb951ui-2hnd-poe-out-issue-was-powering-map-lite-from-rb951ui-2hnd/166440 "2026-10-23T16:10:12Z")

</div>

Hello, This is my first post here, so please move to relevant category if this one is unsuitable. I’m trying to power up mAP lite connected to ether5 port of RB951Ui-2HnD powered via 24v passive injector on ether1, als…

---

## [LHG 5 ax – 5170 MHz Frequency Not Available Despite Official Specifications](https://forum.mikrotik.com/t/lhg-5-ax-5170-mhz-frequency-not-available-despite-official-specifications/273996)

<div class="topic-metadata">

**Author:** [@ajayrai088](https://forum.mikrotik.com/u/ajayrai088)\
**Replies:** 1\
**Last updated:** [October 23, 2026, 1:27pm UTC](https://forum.mikrotik.com/t/lhg-5-ax-5170-mhz-frequency-not-available-despite-official-specifications/273996 "2026-10-23T13:27:27Z")

</div>

According to the official specifications, the LHG 5 ax supports a frequency range of 5170–5875 MHz. However, I am unable to select 5170 MHz on my LHG 5 ax device. I have tried selecting both India and Superchannel in th…

---

## [RB5009UG+S+ won't power up from PoE-IN connected to Dell N2224PX-ON](https://forum.mikrotik.com/t/rb5009ug-s-wont-power-up-from-poe-in-connected-to-dell-n2224px-on/267410)

<div class="topic-metadata">

**Author:** [@gd\_19](https://forum.mikrotik.com/u/gd_19)\
**Replies:** 16\
**Last updated:** [October 22, 2026, 8:19pm UTC](https://forum.mikrotik.com/t/rb5009ug-s-wont-power-up-from-poe-in-connected-to-dell-n2224px-on/267410 "2026-10-22T20:19:00Z")

</div>

Hello all, I’ve also opened a support ticket with Mikrotik for this, and read other threads with similar issue descriptions in the forum but I so far I haven’t been able to reach a conclusion. My RB5009UG+S+ won't powe…

---

## [Sanity check for my home network plan (hEX refresh + CRS310 + cAP ax) - VLAN design and which AP for wall mounting?](https://forum.mikrotik.com/t/sanity-check-for-my-home-network-plan-hex-refresh-crs310-cap-ax-vlan-design-and-which-ap-for-wall-mounting/273736)

<div class="topic-metadata">

**Author:** [@miketechnetwork](https://forum.mikrotik.com/u/miketechnetwork)\
**Replies:** 21\
**Last updated:** [October 22, 2026, 9:23am UTC](https://forum.mikrotik.com/t/sanity-check-for-my-home-network-plan-hex-refresh-crs310-cap-ax-vlan-design-and-which-ap-for-wall-mounting/273736 "2026-10-22T09:23:13Z")

</div>

Hi all, I'm planning to replace my FRITZ!Box with an all-MikroTik setup and would appreciate a sanity check before I order everything. I have an IT background, but I'm new to RouterOS. My goals: VLAN separation, indepen…

---

## [hAP be lite as CAP: 2.4 GHz radio reports running but does not beacon (5 GHz on same CAP works)](https://forum.mikrotik.com/t/hap-be-lite-as-cap-2-4-ghz-radio-reports-running-but-does-not-beacon-5-ghz-on-same-cap-works/273947)

<div class="topic-metadata">

**Author:** [@cambrbr](https://forum.mikrotik.com/u/cambrbr)\
**Replies:** 2\
**Last updated:** [October 21, 2026, 2:50pm UTC](https://forum.mikrotik.com/t/hap-be-lite-as-cap-2-4-ghz-radio-reports-running-but-does-not-beacon-5-ghz-on-same-cap-works/273947 "2026-10-21T14:50:54Z")

</div>

Two hAP be lite (A42G-HbeP) running as CAPs under WiFi CAPsMAN on an RB5009 (wifi-qcom package). 5 GHz works correctly on both. Neither 2.4 GHz radio is detectable by any client, despite reporting as running. Versions: …

---

## [MIKRO TIK CCR2216-1G-12XS-2XQ Router  and using Ubiqity Pro XG 10 PoE Switch possible? ](https://forum.mikrotik.com/t/mikro-tik-ccr2216-1g-12xs-2xq-router-and-using-ubiqity-pro-xg-10-poe-switch-possible/273925)

<div class="topic-metadata">

**Author:** [@mikiqity](https://forum.mikrotik.com/u/mikiqity)\
**Replies:** 2\
**Last updated:** [October 20, 2026, 11:56am UTC](https://forum.mikrotik.com/t/mikro-tik-ccr2216-1g-12xs-2xq-router-and-using-ubiqity-pro-xg-10-poe-switch-possible/273925 "2026-10-20T11:56:02Z")

</div>

MIKRO TIK CCR2216-1G-12XS-2XQ Router and using an Ubiquity Pro XG 10 PoE Switch. Would very much appreciate advice about selecting Transceivers, Thanks

---

## [Sxt lte cat6 vs sxt lte cat7](https://forum.mikrotik.com/t/sxt-lte-cat6-vs-sxt-lte-cat7/273897)

<div class="topic-metadata">

**Author:** [@igorr29](https://forum.mikrotik.com/u/igorr29)\
**Replies:** 2\
**Last updated:** [October 19, 2026, 9:16pm UTC](https://forum.mikrotik.com/t/sxt-lte-cat6-vs-sxt-lte-cat7/273897 "2026-10-19T21:16:02Z")

</div>

i had the sxtr lte with the cat6 modem, and support for B20 (800mhz) was very bad because of almost non existent antenna gain (around 1dBi). the new cat7 sxt supports B28 (700mhz), and i can't find any antenna gain graph…

---

## [CRS320-8P-8S+ vs RB5009 PoE behavior with active USB-C PD adapters](https://forum.mikrotik.com/t/crs320-8p-8s-vs-rb5009-poe-behavior-with-active-usb-c-pd-adapters/273869)

<div class="topic-metadata">

**Author:** [@ghostclick](https://forum.mikrotik.com/u/ghostclick)\
**Replies:** 4\
**Last updated:** [October 19, 2026, 3:24pm UTC](https://forum.mikrotik.com/t/crs320-8p-8s-vs-rb5009-poe-behavior-with-active-usb-c-pd-adapters/273869 "2026-10-19T15:24:18Z")

</div>

Hi everyone, I'm experiencing a specific PoE behavior difference between the RB5009UG+S+IN and the CRS320-8P-8S+ when powering an active 802.3at USB-C PD adapter (Procet 23W USB-C PD splitter, 44V–57V DC input) to power…

---

## [ATL 5G R16 CAPsMAN](https://forum.mikrotik.com/t/atl-5g-r16-capsman/273698)

<div class="topic-metadata">

**Author:** [@iamnotme](https://forum.mikrotik.com/u/iamnotme)\
**Replies:** 5\
**Last updated:** [October 16, 2026, 9:26am UTC](https://forum.mikrotik.com/t/atl-5g-r16-capsman/273698 "2026-10-16T09:26:00Z")

</div>

Hi, Can the ATL 5G R16 run as CAPsMAN even though it does not have it's own WiFi radios? I have just purchased some cAP AC to improve the WiFi in our old stone farmhouse and the cAP AC tells me it is managed by CAPsMAN…

---

## [ATT WiFi Cellular router/modem replacement](https://forum.mikrotik.com/t/att-wifi-cellular-router-modem-replacement/273798)

<div class="topic-metadata">

**Author:** [@wfbuton](https://forum.mikrotik.com/u/wfbuton)\
**Replies:** 21\
**Last updated:** [October 15, 2026, 6:08pm UTC](https://forum.mikrotik.com/t/att-wifi-cellular-router-modem-replacement/273798 "2026-10-15T18:08:01Z")

</div>

I'm looking for an option to replace this completely crippled router. I can't do nat or routiing or ip passthrough or change mode to bridge mode. I'm deciding if I should get the Chateau Pro AX as a replacement. Anyon…

---

## [CRS328-24P-4S+ fan fail](https://forum.mikrotik.com/t/crs328-24p-4s-fan-fail/273790)

<div class="topic-metadata">

**Author:** [@RudolfsPP](https://forum.mikrotik.com/u/RudolfsPP)\
**Replies:** 26\
**Last updated:** [October 15, 2026, 11:49am UTC](https://forum.mikrotik.com/t/crs328-24p-4s-fan-fail/273790 "2026-10-15T11:49:07Z")

</div>

Hey! I have problem with this switch. CPU Temp is about 68C. Fan fail. POE output 0 W. There is about 10 AP connected to it. All Works. Is this software bug? I run at 7.24.2 and fw is 6.41.3. Mybe I need to upgrade to 7.…

---

## [\[hAP ac2\] None of ethernet port work](https://forum.mikrotik.com/t/hap-ac2-none-of-ethernet-port-work/132589)

<div class="topic-metadata">

**Author:** [@karnasw](https://forum.mikrotik.com/u/karnasw)\
**Replies:** 15\
**Last updated:** [October 15, 2026, 10:43am UTC](https://forum.mikrotik.com/t/hap-ac2-none-of-ethernet-port-work/132589 "2026-10-15T10:43:39Z")

</div>

Hi, I have problem with hAP ac2. None of ethernet port working, Windows don’t see cable is connected. I checked board and there is nothing burned on it. Where should I search for a problem? I will try to connect board wi…

---

## [mikrotik 1100ahx4](https://forum.mikrotik.com/t/mikrotik-1100ahx4/273753)

<div class="topic-metadata">

**Author:** [@adilkhan001](https://forum.mikrotik.com/u/adilkhan001)\
**Replies:** 7\
**Last updated:** [October 14, 2026, 6:39pm UTC](https://forum.mikrotik.com/t/mikrotik-1100ahx4/273753 "2026-10-14T18:39:31Z")

</div>

mikrotik 1100ahx4 (6.23v) bat not updated issues I'm upgrading (7.24.v) bat issue not working only restarting only issue and please help me how to install 7.24.

---

## [ROSE (RDS2216-2XG-4S+4XS-2XQ) - Disk availability](https://forum.mikrotik.com/t/rose-rds2216-2xg-4s-4xs-2xq-disk-availability/273823)

<div class="topic-metadata">

**Author:** [@marcinf](https://forum.mikrotik.com/u/marcinf)\
**Replies:** 1\
**Last updated:** [October 14, 2026, 11:04am UTC](https://forum.mikrotik.com/t/rose-rds2216-2xg-4s-4xs-2xq-disk-availability/273823 "2026-10-14T11:04:34Z")

</div>

Hello all, I'm planning to install Mikrotik Rose (RDS2216-2XG-4S+4XS-2XQ) at my company, but from what I've learned, SSD-U2-7-1TB drives are not available. Does anyone have any information about their availability? I …

---

## [Storage capacity on RBcAPGi-5acD2nD](https://forum.mikrotik.com/t/storage-capacity-on-rbcapgi-5acd2nd/273781)

<div class="topic-metadata">

**Author:** [@whitebox](https://forum.mikrotik.com/u/whitebox)\
**Replies:** 10\
**Last updated:** [October 14, 2026, 4:02am UTC](https://forum.mikrotik.com/t/storage-capacity-on-rbcapgi-5acd2nd/273781 "2026-10-14T04:02:00Z")

</div>

I have got this cap ac that I use as an AP. One day it started to behave weird; it did not store config changes, probably because of storage shortage (16 MB full). So I used Netinstall in order to wipe any unused data. A…

---

## [Hardware suggestion for SOHO](https://forum.mikrotik.com/t/hardware-suggestion-for-soho/272240)

<div class="topic-metadata">

**Author:** [@GandalfGrigio](https://forum.mikrotik.com/u/GandalfGrigio)\
**Replies:** 54\
**Last updated:** [October 13, 2026, 3:29pm UTC](https://forum.mikrotik.com/t/hardware-suggestion-for-soho/272240 "2026-10-13T15:29:48Z")

</div>

Hello everyone, I'm new to the MikroTik world. I've always used Vyatta, and later VyOS, in fairly large server farms with high-end hardware (dual quad-core processors, 64GB RAM, etc.), and then EdgeRouters (which are Vya…

---

## [Hardware suggestion home](https://forum.mikrotik.com/t/hardware-suggestion-home/273140)

<div class="topic-metadata">

**Author:** [@geertvangaever](https://forum.mikrotik.com/u/geertvangaever)\
**Replies:** 3\
**Last updated:** [October 13, 2026, 1:25pm UTC](https://forum.mikrotik.com/t/hardware-suggestion-home/273140 "2026-10-13T13:25:05Z")

</div>

Hello, For a new house in a region without cable or DSL connection I already bougth the ATL 5G modem/router. I wondered what is the best extra Mikrotik hardware for a decent and affordable network? Should I invest in …

---

## [Replacing an RBLHGR antenna kit with minimal technical ability?](https://forum.mikrotik.com/t/replacing-an-rblhgr-antenna-kit-with-minimal-technical-ability/273768)

<div class="topic-metadata">

**Author:** [@Buckle](https://forum.mikrotik.com/u/Buckle)\
**Replies:** 4\
**Last updated:** [October 12, 2026, 5:09pm UTC](https://forum.mikrotik.com/t/replacing-an-rblhgr-antenna-kit-with-minimal-technical-ability/273768 "2026-10-12T17:09:12Z")

</div>

Hello. I need to replace my RBLHGR combined 4G antenna and modem kit and would be grateful for advice on going about it. The antenna / modem has been very capable of serving my modest requirements for several years but…

---

## [Upgrade ARM32 -\> ARM64 Products tha uses IPQ-5010. Is possible?](https://forum.mikrotik.com/t/upgrade-arm32-arm64-products-tha-uses-ipq-5010-is-possible/268388)

<div class="topic-metadata">

**Author:** [@fischerdouglas](https://forum.mikrotik.com/u/fischerdouglas)\
**Replies:** 8\
**Last updated:** [October 12, 2026, 12:07pm UTC](https://forum.mikrotik.com/t/upgrade-arm32-arm64-products-tha-uses-ipq-5010-is-possible/268388 "2026-10-12T12:07:57Z")

</div>

MikroTik products with IPQ-5010 can also be upgraded to ARM-64 as L009 that uses IP5018? I did not had the time enter in official Qualcomm portal to get the official datasheet. But I found several references on Interne…

---

## [RouterOS x86 – SFP+ DOM information missing on Intel 82599ES](https://forum.mikrotik.com/t/routeros-x86-sfp-dom-information-missing-on-intel-82599es/273725)

<div class="topic-metadata">

**Author:** [@jmthill](https://forum.mikrotik.com/u/jmthill)\
**Replies:** 8\
**Last updated:** [October 12, 2026, 11:36am UTC](https://forum.mikrotik.com/t/routeros-x86-sfp-dom-information-missing-on-intel-82599es/273725 "2026-10-12T11:36:47Z")

</div>

Hardware: Intel 82599ES dual-port SFP+ NIC (PCI ID 8086:10fb) RouterOS: Latest Long-term release Issue: The 10 Gbps link works correctly, but RouterOS does not expose any SFP+ module information or DOM readings in /in…

[Previous page](https://forum.mikrotik.com/c/hardware/7.md?page=1)

[Next page](https://forum.mikrotik.com/c/hardware/7.md?page=3)
