That doesn't look right...["name="ether1"]
Where should it be run then? MikroTik have stated that they don't recommend running it on CHRs (with V6 anyway - maybe they'll fix it in V7 (if the underworld doesn't freeze first)).Running Dude on devices should simply be removed as a feature
It's NOT a .backup file.I don't have any tools to read exported ".backup" file.Do a "/export" to file and search for it.
Where do you think the return traffic from the internet goes?When I prepare rules like above, hosts from list: access-host don't have internet connection. Why ?
Sometimes, if it's a really big problem, you end up with a cello or even a double-bass.see some bad config with a beautiful headline, copy/paste it and viola! Breaks the web.
:delay 10 :resolve freedns.afraid.org :delay 20 /tool fetch url="http://freedns.afraid.org/dynamic/update.php\?key-goes-here" keep-result=no
Load system Resizing disk(GPT)... ERROR: could not mount disk! Please attach it somewhere else.
It IS irrelevant. The problem is to do with scripting and variables not any other use they may be put to. Answer the question as posed or don't bother answering at all.Its not irrelevant. To solve problem its good to have as much information as possible.
That's irrelevant. Just answer the question as posed. Don't try and tell someone to do something else.Why do you like to store this on the router?
You need to go back to Networking school, because you are wrong.Established/related etc are states between WAN - LAN etc. not from VLAN to VLAN.
The ones listed under Cloud Hosted Router on the website's Downloads page. I'm sure this is not a terribly difficult concept.Which package do I need to use for Mikrotik CHR?
It's a switch, with some low-powered routing capability.Got a CRS125-24G-1S router
Which interface is which?IPTV arrives at CRS112 in vlan 675, then traffic is to go directly to the connected STBs without tagging.
Says who? And why not?A bridge should not "pass" Neighbor-Discovery packets
Wouldn't we all...I'd really like The Dude client to stop crashing, and to be able to continue using it normally, again.
Why? That makes problems a lot harder to diagnose and you can never be sure what is a cause and what is an effect.Logs are written asynchronously
Yes, I'm seeing that too. Most irritating.Also the last (and most important one) line of the log is very hard to read - it almost always stay "between" lines, auto scroll doesn't always work.
add action=masquerade chain=srcnat dst-address=192.168.0.2 dst-port=22,80,161,443 protocol=tcp src-address-list=OnlyFromHere
So why exactly did you reply to this particular 20 day old thread to add that gem of uselessness?sorry no idea
Did he say he was on a dynamic address?restart your router to get new IP
That doesn't convey any useful information. Where are you getting the firmware upgrade package from? Direct download, or upload to device from some previous download?but no luck at all.
You haven't said where you're testing FROM, and WHAT test you are performing.But no success. No Access to the modem...
No.Is it possible for a Device to be member of multiple Network maps?
Don't do that either. It causes all sorts of weird crashy type problems.I don't want to have one device added twice and then just to assign each to different map.
It's kinda irrelevant when you can't get a TCP connection, doncha think?Go to users under sytem and check the permission of the full group. Admin should be a member of the full group
No, no, no. The WLAN will automatically turn on as soon as someone connects to it. It's so obvious.All it does is make your life more difficult by having to keep turning it back on
You may wish to delete some (or all) of the junk that gets stored in the %appdata%\mikrotik\winbox folder.Whenever I login to winbox and click on Quickset the software shutsdown.
I need to access quickset to enable me configure my router for internet access.
Yes it did.fell from a height of 10 meters to the ground and never broke
It's broken.What is the problem
Buy a new one.and what is the solution ?????
/interface bridge set fast-forward=yes [find]
/system script run "myScriptName"
Why did you bother asking if you knew what the answer was better than anyone else then?set 0 and set 2 have been working fine since 3.x days. As long as the interface # listed on PRINT doesn't change I'm able to use it without issue on 6.43.13 in a script or under terminal mode
It stops it working though, which is almost the same thing.yes, it is. the shutdown command on RouterBOARD devices doesn't turn off the device.
No, it should not.Automatic upgrade should be the default
Only if you're using the Micro$oft definition of 'best', which really means worst.and is quickly becoming best practice.
See also viewtopic.php?f=15&t=130551Discovering CHR via Winbox is very hit and miss. My CHR sometimes comes up if I refresh neighbours about 4 times and leave it for 5 mins. I wouldn't pin "all" of the blame on Winbox/WINE combo at this point.
It's unclear if it's deliberate or not.IP->Cloud has disappeared from menu in WebFig and WinBox.