Community discussions

MikroTik App

Search found 18 matches

by vinu
Sat Jan 16, 2021 8:36 pm
Forum: Wireless Networking
Topic: Issues With Apple Device
Replies: 5
Views: 646

Re: Issues With Apple Device

hi i had same issue
i am running dhcp time for 1d no disconnection at all
if u can keep 1d then u can give a try.
by vinu
Mon Jan 11, 2021 10:06 pm
Forum: Beginner Basics
Topic: VOIP SIP Call disconect after 15 minutes
Replies: 5
Views: 410

Re: VOIP SIP Call disconect after 15 minutes

Hi, i faced the same issue even i did disable the SIP alg in service port. upto my knowledge its is double nating both by ipbx and also by router disabling the SIP ALG does the trick for me. Its working fine for past three months although i didn't get a answer for my thread Remember always reboot th...
by vinu
Fri Dec 25, 2020 5:55 pm
Forum: Beginner Basics
Topic: Sip via ptpp local sip server
Replies: 1
Views: 197

Re: Sip via ptpp local sip server

Hi,
go to IP-FIREWALL-SERVICE PORT - SIP
Disable SIP service and reboot your router
try again it should work :)
by vinu
Tue Oct 20, 2020 8:06 pm
Forum: Beginner Basics
Topic: VPN for specific ISP
Replies: 1
Views: 166

Re: VPN for specific ISP

Yes Possible
by vinu
Sat Oct 17, 2020 6:06 pm
Forum: Beginner Basics
Topic: Problem with IPPBX Behind Mikrotik
Replies: 7
Views: 443

Re: Problem with IPPBX Behind Mikrotik

To be honest I nothing springs out as blocking inbound registrations. In fact your firewall could be described as dangerously sparse. I wonder about all the static NATs though, whether these might be conflicting. I might be inclined to strip back all the NAT entries referring to your PBX except for...
by vinu
Wed Oct 14, 2020 4:34 pm
Forum: Beginner Basics
Topic: Problem with IPPBX Behind Mikrotik
Replies: 7
Views: 443

Re: Problem with IPPBX Behind Mikrotik

Disabling the firewall doesn't sound a good idea. Without seeing your exact configuration or documentation for the phone system I suspect what you'll need is (1) Inbound NAT so that a designated public IP address routes to the internal IP address of your PBX. (2) Firewall rules to permit the ports ...
by vinu
Wed Oct 14, 2020 1:38 pm
Forum: Beginner Basics
Topic: Problem with IPPBX Behind Mikrotik
Replies: 7
Views: 443

Re: Problem with IPPBX Behind Mikrotik

Tested 3 phones and 1 soft client PC all connects fine internally and only problem is i cannot connect a soft phone / IP phone from outside network When you say you can't connect from outside the network, do you mean from elsewhere on the Internet? If so then we need to know how these remote phones...
by vinu
Wed Oct 14, 2020 12:00 pm
Forum: Beginner Basics
Topic: Problem with IPPBX Behind Mikrotik
Replies: 7
Views: 443

Problem with IPPBX Behind Mikrotik

Hi, Iam new to the world of IPBX/SIP i have a client who currently wants to ipbx server in their premises with around 5 ip phones so the scenario is public ip (Customer Mikrotik)---->Internal Lan (2 network 192.168.0.0/24 for their PC & 172.16.10.0/24 for IP PHONE NETWORK) IP PBX SERVER IP: 172....
by vinu
Tue Sep 29, 2020 7:17 pm
Forum: Beginner Basics
Topic: Home network setup via hAP lite
Replies: 3
Views: 431

Re: Home network setup via hAP lite

Hi,
try changing your wifi channel width to 20 which will give you better range but u ll lose speed
by vinu
Mon Sep 21, 2020 6:34 pm
Forum: Beginner Basics
Topic: h AP Lite VPN
Replies: 4
Views: 345

Re: h AP Lite VPN

Hi,
from my understanding u want to access a server from your office in your home?

if not can u explain clearly

if it is all you need is a tunnel which will be site to site vpn

but both office and home needs public ip address
by vinu
Thu Jan 11, 2018 12:19 pm
Forum: General
Topic: Bandwidth loss from internet to wireless
Replies: 7
Views: 1226

Re: Bandwidth loss from internet to wireless

Hi you can try to do speed test in the client wireless cpe to your tower ap to check your realtime throughput whats your tx/rx rate showing in client side wireless cpe? signal strength? try to fine tune to get a gud signal by the way rocket m5 i guess u are using is not advised for backhaul radio to...
by vinu
Sun Jul 30, 2017 9:00 pm
Forum: Beginner Basics
Topic: PPPoE SERVER
Replies: 1
Views: 566

Re: PPPoE SERVER

Hi
provide screenshot or config for ur pppoe client setting
by vinu
Mon Jul 17, 2017 9:37 pm
Forum: The User Manager
Topic: > How To Open A Port Using Winbox
Replies: 7
Views: 22129

Re: > How To Open A Port Using Winbox

I heave now updated my RB2011UiAS router to latest version. Unfortunately i cannot connect anymore from browser. Before, i use to connect with address 192.168.88.1:8080. I heave update latest version of inbox and its working but i need to work in browser too. I use to connect remotely to my router ...
by vinu
Fri Jul 07, 2017 8:32 pm
Forum: Wireless Networking
Topic: Drop clients when signal is weak
Replies: 7
Views: 12956

Re: Drop clients when signal is weak

in capsman u can set signal limit if its gets too low that ap automatically kicks out that device and eventually device will connect to another ap with a better signal
by vinu
Thu Jul 06, 2017 8:37 pm
Forum: Scripting
Topic: Hotspot
Replies: 5
Views: 1103

Re: Hotspot

Use scheduler and add ur script
by vinu
Sun Apr 30, 2017 7:18 pm
Forum: Scripting
Topic: Netwatch script doesn't work
Replies: 8
Views: 2146

Re: Netwatch script doesn't work

hi iam using telegram messenger api for netwatch it works like a charm its easy to setup :)
by vinu
Sun Apr 23, 2017 7:38 pm
Forum: The Dude
Topic: Dude Telegram notification example
Replies: 63
Views: 50194

Re: Dude Telegram notification example

Hi, I've tested the hyperlink, that it's inside the fetch command: https://api.telegram.org/bot123456789:AAQFb1byb3LEwMes_TQeCM1k5wsFb_VguhG/sendMessage\?chat_id=123456789&text=Hello But It doesn't even send the Hello message to the group the bot is participating. The webpage says: "{"...
by vinu
Mon Mar 06, 2017 7:44 pm
Forum: Beginner Basics
Topic: media server
Replies: 1
Views: 1789

Re: media server

Hai what device/software you are going to use ,can u please elaborate to know the requirements all under private ip are publice ip? you need firewall rules help?