MikroTik

akshay24

you can achieve more bandwidh with the selction of more channel spectrum like 7 MHZ FDD channel spectrum always gives you more then 15 Mbps per sector , on Full 64 QUAM , more spectrum more bandwidth, but also take care freqquency planing for resuse . this secnario will work 7 km per base station si...

akshay24

wimax technolgy proven and deploy several contary ... what you are waiitng for documents , of wimax notes or wimax deployments results
iam suprise even all the chipset comes for reserch and deployments and you peaple are still unknown .......

akshay24

iam talking on fact for future and future is wimax ...if you and pland happy with wifi then i have no words stay and watch all worlds activity

akshay24

hii john Mt team

any plan for wimax now 2006 is here and your commnet comes on 2004
thousand of MT user waiting for ypur response for supporting Wimax mini pci card ...

wish you good luck for wimax support very very soon

akshay24

i suppose spectrum not free as turbo mode reqiured TX and TX band free

try to change the channel or polorizations

akshay24

just add vlan on WDS abd bridge to vlan on the bridge port configration

thats it very simple..

MT--WdS -----tag/un tag on bridge ---add vlan in WDS-bridge
bridge --port setting just bridge ---vlan

akshay24

can anybosy tell me for 700MHz up convertor manufactrer or site

thanks in advance .,..

akshay24

no this is not pps issue , kinldy use WDS earlier iam having same problem now all links working fine .

EOIP having overhead as compare with WDS is pure bridge

try with wds configration instead of using EOIP

akshay24

is there any way for WDS vlan tagging

plaese suggest thanks in advance

akshay24

plaese tell what is the method of Vlan tagging on WDS bridge

previsoly we have done vlan tagging on EOIP Tunnel

like this ----adding Vlan on Eoip tunnel and bridge to Vlan with tag

akshay24

dear all

has anybody facing problem when link terminated with Repaeter site and load not taking more then 2 mbps and PPS showing only 300 when it goes more then 400 links gives RTOS

kinldu suggest for solutions

akshay24

kinldy provide the details will any card /up convertor will support 700 MHz frequency ,

thanks in advance if any body suggest

akshay24

any exptectation for wimax mini pci ...................................or still we play wifi cards ...

akshay24

I know other companies has problems with 400 mW because of EMS noise they can't pass FCC, can imagine that this 28X will have even bigger noise :-) Then what is the energy drain?? Imagine if you need to use 2 or 4 miniPCI radios. Power consumption then will cause even more overheating than SR5 has. ...

akshay24

what is advanrage for this card ...distance wise or bandwidth wise ...or anything else

akshay24

Has anybody test this card XR-2 and XR-5 600 mw card

more powerfull and more stable...
XTREMERange2
600mW Output Power
Extended Temperature
ESD/EMP Protection
Enhanced Filtering
Industry-Best Sensitivity
5/10/20/40 MHz Channels
MMCX Ant. Connector

akshay24

Is there any faclity for seeing Link distance on runing link as lots of Radio comes with this features .

akshay24

i need to setup and understand as Terabeam AP 802.11 b is proprietory protocol Trurbocell is there any method for conencting MT acess point mode and Terabeam as cleint mode there is limited option for setting up 802.11 compatible AP mode only for cleint option aviable is 1. Turbocell cleint mode(set...

akshay24

Cm9 is well tested card looking good but cm-10 is new card and we are tested so manypair for cm-10 looking good and immporesive in power ....

akshay24

i have seen no power issue with this card working good

akshay24

Hebeda we hav tryied so many card WMIA-123AG working perfectly no issue .

akshay24

any update id is vikram_sharma24in@indiatimes.com

akshay24

hiii JJCinAZ tons of thanks now vlan tagging done sucessfully ...one more help reqiured can we monitored link thorgh native vlan port. i have setup station as transparent bridge and config tagging un tagging on CPE . is that possible for monitorning link from base site as base connected to trunk por...

akshay24

thanks for concern ...............my email id is ...vikram_sharma24in@indiatimes.com

akshay24

has anobody check this with 2.3-3.7 Ghz NL-5354MP PLUS Aries2 Dual Band Wireless Mini-PCI Adapter
Pheenet is not seems anymore , i have found so many with AR5212 but now confused what should i use for getting 2.7 Ghz frequency ny suggestion or i will crux Ar5212 cards

akshay24

i was asking for 2312-2732 this frequency card only .....make and avibilty nowdays ......

akshay24

thanks for screen shot ...can you also update which mini pci card is this ...

i never say regarding any problem iam asking mini pci card make which support reqiured frequency ..Definitely MT not make this card....

akshay24

This is really fantastic .............pics

hope i will find the chip with the reqiured frequency ............

has anybody update me the chipset ..Normis pl take look as this frequency comes with MT ...

akshay24

anybody give me direction pending from last 3 months
.

akshay24

i got the refrenece for 2.7 Ghz from forum .......

but there is not mentioend the card manufacrer

simple is that iam looking for 2.7 ghz card atleast if 2.9 ghz is not aviable

iam not facing any problem iam asking for solution for 2.7 Ghz mini pci

which are supported 2.7 Ghz

akshay24

iam ready with this card but iam not sure which card comes with Ar5212.......if you have suggestion kinldy suggest

akshay24

seee the fquency support bu AR5212 mini pci interface wireless info> print 0 interface-type=Atheros AR5212 tx-power-control=yes ack-timeout-control=yes alignment-mode=yes virtual-aps=yes noise-floor-control=yes scan-support=yes burst-support=yes nstreme-support=yes supported-bands=2ghz-b,5ghz,5ghz-t...

akshay24

problem is that AR5313 based mini pci card not showing the reqiured frequency showing 2.3-6.1 after upgrading the custom frequency ..

i need suggestion for 2.3-2.7 supported frequency

thanks inadvance

akshay24

this very common command already done from, last 4 month back

thanks .....

akshay24

hiiii normis thanks for reply , i got answer this can be done with AR5212 card and custom frequency ... i have already purchased and update arround my all board with custom frequency and planing for huge deployments in spefic ferquency .... can you suggest me for further step or will i wait for core...

akshay24

hiiii

i need frequency range 2.7-2.9 Ghz but i disappoint to see this can be done from old mini pci card AR5212 reached 2.732 only

has anybody give me idea atleast how can i get this card for 2.7 Ghz oprations

Thnaks in advance

akshay24

i have tryied but my vlan packet not tagged
can you give id idea more how can i do the tagging from my radio .....

right now i have done PPOE setup but this is not support multicast

akshay24

indly see the file 2.5-2.7 Ghz already having frequency , can you check for extending frequency from 2.7 ghz to 2.8 Ghz (2.512 - 2.732 (20 MHz step, channels 15-26) - optional license required )

MY MAIN REQIUREMENT IS 2.7 TO 2.8 GHZ ANY SUGGESTION

akshay24

hiii

sergis , iam using nmp-8602 with rb-112 maximum bandwidth achive 6 mbps maximum card tx power is 400 Mw , shall i process for r53 card or 532 router borad for more bandiwdth

rgd

akshay24

Kindly suggest wanted to use Router board 532 with Senao Nmp-8602 card 9 (400 mw)

Kindly suggest me for best performance with higher bandwidth card or board for more then 20 Mbps

waiting for your reply .....

rgd

akshay24

I have setup 2 link with RB-112 , need Vlan tagging tagging with Winbox In a typical scenario a centrally located AP is connected to two CPE and two EoIP tunnels are being created to different remotes to enable Bridge mode operations. Further to this we are interested in putting Ethernet port of dif...

Search found 41 matches

Wimax is here what is the solution MT

VLAN TAGGING REQIURED ON WDS BRIDGE

Mikrotik PPS problme

Will any card support 700Mhz help for solution suggestion

Ubiquiti 600 mw card out for 2 and 5 Ghz

MT winbox utlilty for link diatance features showing

has anybosy connect MT APwith YDI Terabeam Turbocell mode

Extended frequency reqiured for 2.7-2.9 Ghz

hiii using senao NMP-8602

reqiured @0 mbps link suggest card and borad ....

VLAN TAGGING REQIURED radio to radio mutipoint mode