Community discussions

MUM Europe 2020

Search found 4 matches

by Oroachi
Sun Mar 19, 2017 6:26 pm
Forum: Beginner Basics
Topic: Default Mikrotik Firewall config (RouterOS 6.38.5)
Replies: 6
Views: 6899

Re: Default Mikrotik Firewall config (RouterOS 6.38.5)

I was doing the scan from outside my network (from my workplace) to my WAN IP, however, thanks for highlighting the error in my port forward rule. I switched like so and my issue appears to be resolved: OLD chain=dstnat action=dst-nat to-addresses=192.168.88.101 to-ports=32400 protocol=tcp in-interf...
by Oroachi
Sat Mar 18, 2017 8:16 pm
Forum: Beginner Basics
Topic: Default Mikrotik Firewall config (RouterOS 6.38.5)
Replies: 6
Views: 6899

Re: Default Mikrotik Firewall config (RouterOS 6.38.5)

Here you go: # mar/18/2017 13:15:15 by RouterOS 6.38.5 # software id = QXJH-05EV # /interface ethernet set [ find default-name=ether2 ] name=ether2-master set [ find default-name=ether3 ] master-port=ether2-master set [ find default-name=ether4 ] master-port=ether2-master set [ find default-name=eth...
by Oroachi
Fri Mar 17, 2017 8:50 pm
Forum: Beginner Basics
Topic: Default Mikrotik Firewall config (RouterOS 6.38.5)
Replies: 6
Views: 6899

Re: Default Mikrotik Firewall config (RouterOS 6.38.5)

OK. Now, the issue that I'm running into (and I'm not entirely sure if it's an issue or not) is that whenever I run an external TCP port scan via nmap to the address assigned to ether1 (my WAN interface), I see that the Mikrotik responds to ALL TCP requests (no ports are being filtered). Is this int...
by Oroachi
Fri Mar 17, 2017 8:09 am
Forum: Beginner Basics
Topic: Default Mikrotik Firewall config (RouterOS 6.38.5)
Replies: 6
Views: 6899

Default Mikrotik Firewall config (RouterOS 6.38.5)

Hello, I recently bought an RB750Gr3 and upon installing and upgrading it to 6.38.5, I saw that the default firewall config leaves the RB's WAN interface set to accept connections on all ports (according to nmap)? This is the current firewall config that I have at the moment, however, I'm not sure i...