Community discussions

Search found 18 matches

by cvbkf
Fri Apr 19, 2019 4:38 pm
Forum: General
Topic: CRS326 + multiple vlans with hardware offloading and non-vlan ports
Replies: 5
Views: 388

Re: CRS326 + multiple vlans with hardware offloading and non-vlan ports

Thanks for your replies. See the VLAN link in my signature. I've implemented it with great success in my environments. That's a pretty cool summary/guide, it gave a me a whole new perspective for my network architecture. Based on that i decided to move the CRS326 to the top, so it is directly attach...
by cvbkf
Wed Apr 17, 2019 10:35 pm
Forum: General
Topic: CRS326 + multiple vlans with hardware offloading and non-vlan ports
Replies: 5
Views: 388

CRS326 + multiple vlans with hardware offloading and non-vlan ports

Hello, i want to replace a CRS125 with a CRS326 and switch from bridge-based vlans to vlan switching over the switch chip, so that hardware offloading does work for all vlans. i read in the wiki how this can be done with the crs326, but i am not sure if my planned setup is possible with only using o...
by cvbkf
Tue Jan 15, 2019 7:22 am
Forum: General
Topic: Access to Mikrotik behind CGN with VPN (Ubuntu)
Replies: 0
Views: 230

Access to Mikrotik behind CGN with VPN (Ubuntu)

Hi, i have a dual-wan-failover setup here - one uplink is common cable internet, the other one is a SXT LTE Kit from Mikrotik. My cellular provider does not provide public IP addresses for LTE users and uses carrier grade NAT, which is bad. I just want the possibility to access my network in case of...
by cvbkf
Mon Dec 10, 2018 3:43 pm
Forum: General
Topic: Advanced CAPSman config with vlan trunk to firewall
Replies: 1
Views: 237

Re: Advanced CAPSman config with vlan trunk to firewall

Fixed by setting datapath to the same bridge as the local network, using tag with VID. the real problem was a typo in the default route for the vlan, fixed that, too.
by cvbkf
Sun Dec 09, 2018 2:42 am
Forum: General
Topic: Advanced CAPSman config with vlan trunk to firewall
Replies: 1
Views: 237

Advanced CAPSman config with vlan trunk to firewall

Hi there, i have some problems with adding a wireless network for guests to my network setup, which manages the wireless aps via capsman. The CAPSman manager switch has a direct connection to the OPNSense Firewall with one 10 Gbit/s cable. So, i want to add the guest network separated by VLAN from m...
by cvbkf
Thu Oct 18, 2018 12:29 am
Forum: General
Topic: Split trunk eth/vlan port transparently to two physical ports
Replies: 3
Views: 381

Re: Split trunk eth/vlan port transparently to two physical ports

thanks for your reply. somewhere on the forum i read that the interface which is used for passthrough on the mikrotik device claims all packets from the mac address which is used for passthrough. Unfortunately i can't find this post again. That's why i tried to assign a different mac address to the ...
by cvbkf
Tue Oct 16, 2018 3:52 am
Forum: General
Topic: Split trunk eth/vlan port transparently to two physical ports
Replies: 3
Views: 381

Split trunk eth/vlan port transparently to two physical ports

Hello, i have a problem with a SXT LTE Kit regarding LTE-Passthrough and concurrent management of the device. The SXT LTE Kit is directly attached with one 100m cable to an OPNSense (FreeBSD-based) firewall server, and provides via multi-wan a fallback connection in case of a failed DSL connection. ...
by cvbkf
Wed Oct 03, 2018 5:42 pm
Forum: RouterBOARD hardware
Topic: What happened to the CRS305-1G-4S+IN?
Replies: 23
Views: 6293

Re: What happened to the CRS305-1G-4S+IN?

Oh yeah, i would need some of them :D
Or the CRS309-1G-8S+PC, there are no news, too.
by cvbkf
Wed Sep 12, 2018 11:03 am
Forum: General
Topic: LTE Passthrough getting address as expected but no internet
Replies: 4
Views: 2106

Re: LTE Passthrough getting address as expected but no internet

Which RouterOS version do you have on both devices ? I have a WAP LTE Kit connected to an OPNSense firewall, which lost internet access after upgrading to RoS 6.43. After that, i did a downgrade back to 6.42.7 and the connection was back online. I think this change in 6.43 caused or is related to th...
by cvbkf
Sun May 27, 2018 11:50 pm
Forum: RouterBOARD hardware
Topic: S+RJ10 and Jumbo Frames
Replies: 10
Views: 2751

Re: S+RJ10 and Jumbo Frames

I tried the same with two S+RJ10 modules per switch and found the following: 2x CRS317-24G-2S+ with 2x S+RJ10 both switches have a minimal configuration: bridge with all RJ45 and SFP Ports, HW Offloading, MTU = 9000 Switch1 is connected with Switch2 via SFP1 on both devices. Two workstations are con...
by cvbkf
Thu May 17, 2018 2:06 am
Forum: RouterBOARD hardware
Topic: show the real link speed of 10 GbE SFP modules
Replies: 0
Views: 394

show the real link speed of 10 GbE SFP modules

Hello, i have some problems with my 10 GbE network, which i can't properly analyze due some strange behavior of the mikrotik switches or the sfp modules. so, basically, my setup looks like this: Workstation (S+85DLC03DI via SFP to PCIe Card) <---- 30m 50/125 OM4 fibre cable ----> SFP1 (S+85DLC03DI) ...
by cvbkf
Tue Apr 24, 2018 2:44 pm
Forum: Wireless Networking
Topic: (new) SXT LTE kit availability
Replies: 1
Views: 544

(new) SXT LTE kit availability

Just a short and quick question, is there any timeline for the release of the new SXT LTE Kit as some other products from the MUM are already listed ? I am desperately in need of a better solution, currently i have a wap lte kit at a location, which barely has enough reception. the only available ba...
by cvbkf
Mon Apr 09, 2018 1:08 pm
Forum: RouterBOARD hardware
Topic: S+RJ10 10Gb SFP module: Do they even work?
Replies: 8
Views: 3909

Re: S+RJ10 10Gb SFP module: Do they even work?

That is very strange, i think at least 1Gb has to work. While 35m may be too long for 10Gb, the lesser rates should work. Mikrotik states 30m as maximum length for a CAT6 cable, so a CAT5e cable is possibly worse. I just tried it with my setup after patching both Cat5e cables together (total length ...
by cvbkf
Mon Apr 09, 2018 12:34 am
Forum: RouterBOARD hardware
Topic: S+RJ10 10Gb SFP module: Do they even work?
Replies: 8
Views: 3909

Re: S+RJ10 10Gb SFP module: Do they even work?

Hello, hope my answer does not come too late. i have three CRS326 installed, one per floor, with six S+RJ10 modules. the cables between the floors are duplex CAT5e F/UTP with ~50m length, so i put one CRS326 on the first floor. cellar to first floor are now ~20m, first floor to second floor ~30m cab...
by cvbkf
Wed Jan 31, 2018 7:29 pm
Forum: RouterBOARD hardware
Topic: S+RJ10 availability
Replies: 8
Views: 1122

Re: S+RJ10 availability

Hello,

yes i did a few tests. Everything fine so far, there are a few driver issues with Linux (you basically need to compile the driver from ubuntu 18.04 source), but the Windows machine is fine. Tested with 30m CAT.7 S/SFTP cable between CRS326 and Asus XG-C100C, 10 GBit/s up and running.
by cvbkf
Thu Jan 11, 2018 5:14 pm
Forum: RouterBOARD hardware
Topic: S+RJ10 availability
Replies: 8
Views: 1122

Re: S+RJ10 availability

Got them today. Plugged into a CRS317-1G-16S+. What a shame. Shows link without a cable plugged in and lights go on and off. Auto Negotiation shows done/10Gbps. TX Counters increase. Seems to be a wireless card. SFP Info show 1m Copperlength and Wavelength 1280.00nm. SFP Info says the same here, TX...
by cvbkf
Wed Jan 10, 2018 8:00 pm
Forum: RouterBOARD hardware
Topic: S+RJ10 availability
Replies: 8
Views: 1122

Re: S+RJ10 availability

Ordered some from mikrotik-store.eu, too. Received them today - after two days. :)
by cvbkf
Mon Apr 03, 2017 12:27 pm
Forum: General
Topic: Capsman with tagged guest wifi and untagged internal wifi
Replies: 0
Views: 462

Capsman with tagged guest wifi and untagged internal wifi

hello, i am quite new to router os and really fascinated by the possibilites provided by hard- and software. i have a network setup consisting of three crs125-24g-1rm at my office, connected to the internet through a pfsense appliance. further, there are a few cap lite for wifi. they are new, i repl...