Community discussions

Search found 21 matches

by MarHazK
Thu Sep 12, 2019 9:29 am
Forum: General
Topic: Traffic Forwarding from VPN A to VPN B
Replies: 1
Views: 308

Traffic Forwarding from VPN A to VPN B

Hi,

How do I allow traffic forwarding from VPN Client A to VPN Client B through VPN Server?

i.e:
1) I'm using PC VPN Client A, able to pinging to PC VPN Client B.
2) I'm using PC VPN Client A, able to access to any opened ports hosted by PC VPN Client B.
by MarHazK
Fri Aug 09, 2019 4:56 am
Forum: Beginner Basics
Topic: There's no Unwatch topic button
Replies: 2
Views: 356

There's no Unwatch topic button

just found out that there's no unwatch button for topic (1st photo), however post has the button (subs/unsub) (2nd photo).
by MarHazK
Tue Jul 02, 2019 1:10 am
Forum: Beginner Basics
Topic: RB2011 slow internet even with fasttrack
Replies: 98
Views: 13620

Re: RB2011 slow internet even with fasttrack

so, anyone has a sample config how to solve this yet so that the TiK can achieve the expected speeds (ie should be 800mbps at 800mbps ISP internet plan but physically still stucked at 60-130mbps)?

Sent from my CPH1819 using Tapatalk

by MarHazK
Fri Jun 14, 2019 1:16 pm
Forum: Beginner Basics
Topic: Two WAN, 1 Mikrotik, 2 Networks [SOLVED]
Replies: 1
Views: 302

Two WAN, 1 Mikrotik, 2 Networks [SOLVED]

Is it possible to do like this? If so, how to do so? Mikrotik at eth1 (192.168.0.2/24) connected to Router A (ISP A) Mikrotik at eth2 (192.168.1.2/24) connected to Router B (ISP B) PC A route to DHCP Network A at subnet 24 via eth3. PC B route to DHCP Network B at subnet 24 via eth4. Both DHCP and r...
by MarHazK
Sun May 12, 2019 12:00 pm
Forum: Beginner Basics
Topic: DMZ local ip to another without dstnat/port-forward the ports [SOLVED]
Replies: 6
Views: 464

Re: DMZ local ip to another without dstnat/port-forward the ports [SOLVED]

why not just route: just connect to .1.10/11 address? gateway of 0.100 is 0.1 = Tik right? and Tik knows how to get to 1.1x... never tried route both gateways/afraid both will have conflicts due differences of ISPs for both gateway, in other word, 192.168.0.1/24 route to public ip A (ISP A), 192.16...
by MarHazK
Sat May 11, 2019 6:09 pm
Forum: Beginner Basics
Topic: DMZ local ip to another without dstnat/port-forward the ports [SOLVED]
Replies: 6
Views: 464

DMZ local ip to another without dstnat/port-forward the ports [SOLVED]

Hi, I have 1 PC (192.168.0.100) connected to 1 mikrotik device (192.168.0.1/24) at ether2. Then 2 servers which: - Web Server A (192.168.1.10) connected to same mikrotik device (192.168.1.1/24) at ether3. - Web Server B (192.168.1.11) connected to same mikrotik device (192.168.1.1/24) at ether3. So,...
by MarHazK
Sat Apr 20, 2019 9:12 am
Forum: Beginner Basics
Topic: RB2011UiAS-RM WAN not achieve 1GBps
Replies: 4
Views: 462

RB2011UiAS-RM WAN not achieve 1GBps

Can anyone share best tips/configurations for RB2011UiAS-RM able to get 1GBps? We have internet speeds D/U at 1GBps with Cat6 installed from ASUS RT-AC66U link to to RB2011UiAS-RM's WAN eth1 then from rb2011UiAS-RM LAN eth2-5 to all the 4 PCs, but... sadly, when I do the speedtest, I just received 2...
by MarHazK
Sun Jan 27, 2019 5:21 am
Forum: Beginner Basics
Topic: Traffic Forwarding
Replies: 16
Views: 935

Re: Traffic Forwarding

Well your explanation is a bit fuzzy. A diagram would have helped. Also helpful at a certain point to post config /export hide=sensitive file=mylatestconfig However you want to know if the MT router can route traffic internally between vlans. The answer is YES just need the appropriate firewall fil...
by MarHazK
Sat Jan 26, 2019 7:27 pm
Forum: Beginner Basics
Topic: Traffic Forwarding
Replies: 16
Views: 935

Traffic Forwarding

Assuming that my PC (10.30.11.50/24) is connected to the Mikrotik at bridge-lan1 (10.30.11.1/24), but there's another bridge that my PC unable to connect to, known bridge-lan2 (192.168.0.1/24) where only servers are able to connect to that internal network (where it is bridge-lan2) via hub. So I hav...
by MarHazK
Tue Nov 13, 2018 10:13 am
Forum: Beginner Basics
Topic: 2 way communication between 2 subnets 2 interfaces [SOLVED]
Replies: 13
Views: 4249

Re: 2 way communication between 2 subnets 2 interfaces [SOLVED]

may i know how did you solve these?
by MarHazK
Sun Nov 11, 2018 9:18 am
Forum: Beginner Basics
Topic: Bridging TWO network but each interface communicate each other
Replies: 16
Views: 1500

Re: Bridging TWO network but each interface communicate each other

With your setup, I would have setup the link between the router as an own net (lan C) So Lan A have a route to Lan C on the Left router and Lan C has a route to Lan B on the right side. also possible, but i dont know what commands should i apply to allow them communicating to each other. can u post...
by MarHazK
Sun Nov 11, 2018 8:53 am
Forum: Beginner Basics
Topic: Bridging TWO network but each interface communicate each other
Replies: 16
Views: 1500

Re: Bridging TWO network but each interface communicate each other

It is better to post the picture in the site.
Then the picture would stay in the forum.
For some reason adblock in google removes the site you are using.

screenshot_316.jpg
thnx for reminding. updated the post with attachment included.
by MarHazK
Sun Nov 11, 2018 5:30 am
Forum: Beginner Basics
Topic: Bridging TWO network but each interface communicate each other
Replies: 16
Views: 1500

Re: Bridging TWO network but each interface communicate each other

Can you post your firewall rules as is............ theres no filter rules/NAT for now.. everything is empty and reset. but the idea diagram is like below: http://pub.haztech.com.my/screenshot.316.jpg The problem is, the Router A need to be configured, which there's no filter rules/NAT at the moment...
by MarHazK
Fri Nov 09, 2018 5:36 pm
Forum: Beginner Basics
Topic: Bridging TWO network but each interface communicate each other
Replies: 16
Views: 1500

Re: Bridging TWO network but each interface communicate each other

If you have explicit drop all else forward rules, they will not talk and you would have to make explicit rules to allow this routing (my preference).
allow lan 1 to lan 2
allow lan2 to lan 1
Its okay. Anyway, how do I apply this? I have no idea doing these in IP>firewall
by MarHazK
Fri Nov 09, 2018 7:44 am
Forum: Beginner Basics
Topic: Bridging TWO network but each interface communicate each other
Replies: 16
Views: 1500

Re: Bridging TWO network but each interface communicate each other

Exactly. Router by default route all networks together (routing = L3 forwarding). If you bridge it together, it is same as if you plug both ports straight into same switch and then put all clients on the switch as well - it will be mess, right? /ip firewall nat add chain=srcnat action=src-nat to-ad...
by MarHazK
Fri Nov 09, 2018 6:44 am
Forum: Beginner Basics
Topic: Bridging TWO network but each interface communicate each other
Replies: 16
Views: 1500

Re: Bridging TWO network but each interface communicate each other

"bridge" is L2 feature. You can imagine it as switch with some enhanced abilities to filter/translate data. That means everything will pass through including DHCP requests and responses. You don't want that as you described want two separate LAN, each with own DHCP server. As long as there are rout...
by MarHazK
Fri Nov 09, 2018 5:41 am
Forum: Beginner Basics
Topic: Bridging TWO network but each interface communicate each other
Replies: 16
Views: 1500

Re: Bridging TWO network but each interface communicate each other

Put both on the same bridge (by the way only need one masquerade rule if you only have one WAN interface). By both being on the same bridge they will be routable by the router. To explicitly connect them, ensure firewall rules allow it especially if you have drop else rule at the end of the forward...
by MarHazK
Fri Nov 09, 2018 4:51 am
Forum: Beginner Basics
Topic: Bridging TWO network but each interface communicate each other
Replies: 16
Views: 1500

Bridging TWO network but each interface communicate each other

Hello, I have this setup: - Router A ETH2 = 10.30.14.0/24 with DHCP server A for router A, connecting to WAN-A - Router B ETH2 = 10.30.13.0/24 with DHCP server B for router B, connecting to WAN-B. What i'm planning/going to do is: - Clients on Router A will get 10.30.14.0/24 IP addresses & network (...
by MarHazK
Mon Apr 23, 2018 5:24 am
Forum: Beginner Basics
Topic: Disallow unknown logins from internet access
Replies: 8
Views: 756

Re: Disallow unknown logins from internet access

yep, have to access from internet for backup-solution purposes.. normally i connect through PPTP but incase some "gateway/pptp ip/intranet" down, i have to use the public ip.. just wondering, how about if I change the services ports (22, 23, 8192) to the new ports (2222, 2223, 18192), is it possible...
by MarHazK
Mon Apr 23, 2018 3:13 am
Forum: Beginner Basics
Topic: Disallow unknown logins from internet access
Replies: 8
Views: 756

Disallow unknown logins from internet access

Hello,

How to block unknown logins (specific IP) from the internet to my winbox, telnet & ssh. This ip (118.101.53.152) keep retrying/brute force to login my routerOS since last week till now.

Thanks,

Best regards,
Marhazk
by MarHazK
Wed May 03, 2017 9:23 pm
Forum: General
Topic: Mikrotik WAN IP & IP/cloud over PPTP Server WAN
Replies: 0
Views: 251

Mikrotik WAN IP & IP/cloud over PPTP Server WAN

I have PPTP Client on Mikrotik that connected to the internet on WAN ip (125.x.x.x). The PPTP client in the Mikrotik is successfully connected to my PPTP Server on internet CentOS Linux, WAN IP (128.x.x.x) .....BUT, the Mikrotik's WAN ip still return 125.x.x.x. How do I change my Mikrotik's WAN IP t...