Community discussions

Search found 25 matches

by Neferith
Wed Aug 08, 2018 10:47 am
Forum: Beginner Basics
Topic: CAP's ident conflict
Replies: 1
Views: 1432

Re: CAP's ident conflict

For those who had the same problem: Solution is to manually set MAC address for Ap's bridge. Use Ether1 MAC address.

BR/Eliash
by Neferith
Fri Aug 03, 2018 11:10 am
Forum: Beginner Basics
Topic: CAP's ident conflict
Replies: 1
Views: 1432

CAP's ident conflict

Hello All, I have problem with 1 of 4 APs which are managed by CAPsMAN. For AP01 I get errors: 10:02:25 caps,info [::ffff:10.1.100.11:43729,Join,[6C:3B:6B:42:C7:7B]] joined, pro vides radio(s): 6C:3B:6B:42:C7:7C 10:02:29 caps,info OGR-AP01-1: selected channel 2412/20-Ce/gn(20dBm) 10:02:56 [b]caps,er...
by Neferith
Fri Jul 13, 2018 12:16 pm
Forum: General
Topic: BPDU problem
Replies: 38
Views: 2983

Re: BPDU problem

I installed RC 6.43 and it works great!

Thanks again, especially for you Sindy for your time and effort!

Take care!
BR/Eliash
by Neferith
Thu Jul 12, 2018 10:36 am
Forum: General
Topic: BPDU problem
Replies: 38
Views: 2983

Re: BPDU problem

Wooow! I just got answear from MT support: Hello, Either you need to manually configure dynamic CAP interfaces to corresponding VLAN in the Bridge VLAN table or upgrade to the latest RouterOS v6.43rc where it has been fixed. What's new in 6.43rc42 (2018-Jul-04 15:07): *) bridge - add dynamic CAP int...
by Neferith
Thu Jul 12, 2018 10:23 am
Forum: General
Topic: BPDU problem
Replies: 38
Views: 2983

Re: BPDU problem

Hi All, I'm a bit confused, that MT doesn't provide any working solution which supports normal vlans, trunking, rstp. When I was suing different bridges for vlans, everything worked excet rtsp. When now I use vlan-filter with 1 bridge, everything works except VLANs/DHCP on Access Points :/ Does anyo...
by Neferith
Wed Jul 11, 2018 4:21 pm
Forum: General
Topic: BPDU problem
Replies: 38
Views: 2983

Re: BPDU problem

Disabling vlan filter on bridge disconnected me totally.Keep in mind, there's only 1 bridge for whole router. I enabled in again. Then I made a test with adding dynamic radio interfaces to the tagged list in the two /interface bridge vlan items and it seems to work :) I tried it in my small lab envi...
by Neferith
Wed Jul 11, 2018 2:50 pm
Forum: General
Topic: BPDU problem
Replies: 38
Views: 2983

Re: BPDU problem

Hi Sindy, Still no luck. Is it normal that interfaces of registered APs are in pvid=1 /interface bridge port print details interface=OGR-AP04-1 bridge=bridge priority=0x80 path-cost=10 internal-path-cost=10 edge=yes point-to-point=no learn=auto horizon=none auto-isolate=no restricted-role=no restric...
by Neferith
Wed Jul 11, 2018 1:51 pm
Forum: General
Topic: BPDU problem
Replies: 38
Views: 2983

Re: BPDU problem

Hi, I unset bridge from config and kept it noly in datapath. Didn't help. [xadmin@OGR-R01] > /caps-man interface print det Flags: M - master, D - dynamic, B - bound, X - disabled, I - inactive, R - running 0 MDB name="OGR-AP02-1" mac-address=CC:2D:E0:31:94:5D arp-timeout=auto radio-mac=CC:2D:E0:31:9...
by Neferith
Wed Jul 11, 2018 12:37 pm
Forum: General
Topic: BPDU problem
Replies: 38
Views: 2983

Re: BPDU problem

Hi, I addedd vlan ID for datapath configuration for each SSID, but client still cannot get IP address. Datapath config: xadmin@OGR-R01] > caps-man datapath print 0 name="datapath-OFFICE" bridge=bridge vlan-id=20 1 name="datapath-VISITORS" bridge=bridge vlan-id=30 Keep in mind that we use the same co...
by Neferith
Wed Jul 11, 2018 11:43 am
Forum: General
Topic: BPDU problem
Replies: 38
Views: 2983

Re: BPDU problem

Hi Sindy, Thanks for your answer. There's no such command like /capsman interface prit /interface bridge vlan print xadmin@OGR-R01] > /interface bridge vlan print Flags: X - disabled, D - dynamic # BRIDGE VLAN-IDS CURRENT-TAGGED CURRENT-UNTAGGED 0 bridge 1 bridge ether3 sfp-sfpplus1 ether4 sfp-sfppl...
by Neferith
Wed Jul 11, 2018 10:39 am
Forum: General
Topic: BPDU problem
Replies: 38
Views: 2983

Re: BPDU problem

Hi Sindy, Previously, I configured CAPsMAN with datapath settings: bridge-vlan20 for OFFICE (vlan20) and bridge-vlan30 for VISITORS (vlan30), so CAPsMAN knows, to which VLAN traffic belongs. Now, with vlan-filter configuration, I have 1 common bridge within router and I don't specify in datapath any...
by Neferith
Tue Jul 10, 2018 8:45 pm
Forum: General
Topic: BPDU problem
Replies: 38
Views: 2983

Re: BPDU problem

Hello All, Many thanks for help from all you - I implemented changes in VLANs and trunks/RSTP/DHCP for LAN work as expected. I need to ask for some more support one more time. After vlan-related changes my CAPsMAN stopped working. SSID's are visibile but I cannot connect - I don't get IP address (I ...
by Neferith
Mon Jul 02, 2018 4:11 pm
Forum: General
Topic: BPDU problem
Replies: 38
Views: 2983

Re: BPDU problem

Great!
It seems to work. For a test I set MST on both MT and Cisco side, and works well.

Thanks you very much for your time and effort!
Best regards,
Eliash
by Neferith
Mon Jul 02, 2018 3:49 pm
Forum: General
Topic: BPDU problem
Replies: 38
Views: 2983

Re: BPDU problem

Hi Sindy,

Cisco is running rapid-pvst. It's only LAB envorinment, on production I will use Netgear. If current Mikrotik config works with Netgear then I'm fine with that :)

BR/Eliash
by Neferith
Mon Jul 02, 2018 3:18 pm
Forum: General
Topic: BPDU problem
Replies: 38
Views: 2983

Re: BPDU problem

Hi, Thank you for all your comments. I have a progess ;) In my lab I managed to implement settings you suggested with vlan-filtering and 1 commong bridge. DHCP and intervlan routing works well except BPDU's for each VLAN (works only for vlan1) This is my lab config: /interface bridge add admin-mac=4...
by Neferith
Sun Jul 01, 2018 8:56 pm
Forum: General
Topic: BPDU problem
Replies: 38
Views: 2983

Re: BPDU problem

Hi Sindy, I tried your suggestion, but still with no success. See my current code: # jan/02/1970 00:10:24 by RouterOS 6.42.1 # software id = 9VYH-4F3W # # model = 2011UiAS # serial number = 771E069D0D75 /interface bridge add admin-mac=6C:3B:6B:28:77:95 auto-mac=no name=bridge priority=0x4096 \ vlan-...
by Neferith
Sun Jul 01, 2018 7:38 pm
Forum: General
Topic: BPDU problem
Replies: 38
Views: 2983

Re: BPDU problem

Hello All, Thank you for all your comments and hints. They are all very valuable for me. I set up a lab at home with such scenario: vlan 10 (10.1.10.0/24) - port ether2 (access) vlan 20 (10.1.20.0/24) - port ether3 (access) vlan 30 (10.1.30.0/24) - port ether4 (access) vlan 100 (10.1.100.0/24) - por...
by Neferith
Fri Jun 29, 2018 3:07 pm
Forum: General
Topic: BPDU problem
Replies: 38
Views: 2983

Re: BPDU problem

Hi, to summarize, my current scenario for vlans: 10 - wired office 20 -WLAN office 30 - Internet only vlan (captive portal) 100 - mgmt 192 - old 192.168.0.0/24 legacy network I should create 1 common bridge /interface bridge add name=bridge vlan-filtering=yes add ports to the bridge and for SFP whic...
by Neferith
Fri Jun 29, 2018 12:35 pm
Forum: General
Topic: BPDU problem
Replies: 38
Views: 2983

Re: BPDU problem

I have some more questions: I have couple of VLANs: 10,20,30, 100 and 192 I created bridges for each vlan: bridge-vlan10,bridge-vlan20,bridge-vlan30,bridge-vlan100 and bridge-vlan192 My trunks are on physical ports SFP1, SPF2, SFP3 and SFP4 According to proposed solution (example): /interface bridge...
by Neferith
Fri Jun 29, 2018 11:58 am
Forum: General
Topic: BPDU problem
Replies: 38
Views: 2983

Re: BPDU problem

Thank you very much for your help - I will try reconfiguration and let you know about the result.

best regards,
Eliash
by Neferith
Fri Jun 29, 2018 11:35 am
Forum: General
Topic: BPDU problem
Replies: 38
Views: 2983

Re: BPDU problem

Hi,

Thanks for your reply.

Netgears have the same, default priority: 32768

Can you verify if my trunk configuration is correct? I'm new to Mikrotik.

/BR Eliash
by Neferith
Thu Jun 28, 2018 2:54 pm
Forum: General
Topic: BPDU problem
Replies: 38
Views: 2983

BPDU problem

Hi, I'm trying to set up quite simple topology: Netgear GS728 switch [Gi 25] -----trunk----- [SFP1] Mikrotik [SFP2] -----trunk----- [Gi 25] Netgear GS728 switch Mikrotik is the root for all vlans (10,20,30,100 and 192) with Priority 4096, I use RSTP. But Netgear switches somehow doesn't respect MT a...
by Neferith
Thu Jul 13, 2017 10:47 am
Forum: General
Topic: ARP table with strange dynamic entries
Replies: 2
Views: 375

Re: ARP table with strange dynamic entries

Hi Chris,

You're totally right - ping with src-address works :)

Thank You very much for fast and professional help!

BR/Neferith
by Neferith
Thu Jul 13, 2017 9:15 am
Forum: General
Topic: ARP table with strange dynamic entries
Replies: 2
Views: 375

ARP table with strange dynamic entries

Hi All, I use CRS226-24G-2S+ with software 6.39.2. There are couple of bridge interfaces for each vlan: bridge-vlan10 vlan10 10.2.10.0/24 bridge-vlan20 vlan 20 10.2.20.0/24 ... One of host in vlan10 is 10.2.10.20 which I can't reach form different vlans/subnets than his own. I can ping it from 10.2....
by Neferith
Mon Apr 03, 2017 2:52 pm
Forum: Beginner Basics
Topic: Problem with Hotspot - very slow website browsing
Replies: 5
Views: 1202

Problem with Hotspot - very slow website browsing

Hi All, I have problem with setting a Hotspot. I have 2 WLAN networks - OFFICE for normal users and VISITORS as hotspot. My OFFICE network works well, but VISITORS is not. When user authenticates, internet works extremely slow. I'm able to ping servers in internet, but website browsing works terribl...