Community discussions

MikroTik App

Search found 135 matches

by PortalNET
Sun Feb 25, 2024 10:17 pm
Forum: General
Topic: Flow control issue on RB5009 and CRS305 - NEED MIKROTIK SUPPORT
Replies: 6
Views: 2224

Re: Flow control issue on RB5009 and CRS305 - NEED MIKROTIK SUPPORT

Dear all, i'm experiencing issue using flow control when there is a speed change from 10G link to 2.5G. The specific case is about GPON ONT (with line profile 2.5Gbps download an 1.0Gbps upload, both tested on SFP ONT or RJ45 external ONT), during an upload beacause the link is not symmetric, the O...
by PortalNET
Sun Feb 25, 2024 9:58 pm
Forum: General
Topic: Flow Control, should I use it?
Replies: 42
Views: 44033

Re: Flow Control, should I use it?

Hi Guys i know i know this is an old thread, i love digging old topics put them alive.. lets make flow-control more strange and awkward.... we are running mikrotik v7 hardware and we have a couple of OLTs... due to limitation on V7 mikrotik hardware we have few 10g ports.. we are using in the middle...
by PortalNET
Tue Feb 20, 2024 2:42 am
Forum: General
Topic: unable to install router os on dell server
Replies: 3
Views: 448

Re: unable to install router os on dell server

Firs you need to format USB pendrive then afte download rufus download mikrotik x86 install image https://download.mikrotik.com/routeros/7.13.5/install-image-7.13.5.zip format HDD or HDDs if running raid mode.. and upack insall-image.zip extra img file and load on RUFUS and bur into USB.. power up t...
by PortalNET
Wed Jan 03, 2024 4:21 am
Forum: Forwarding Protocols
Topic: IS-IS
Replies: 134
Views: 53366

Re: IS-IS

I'm a bit mixed on the new high core count moves. Frankly, for pure routing the 2004 and 2116 are blazing fast, optimizing routeros to use more cores would just keep making those better and better. The biggest problem I'm seeing still comes down to single core performance. BGP is way faster, but st...
by PortalNET
Mon Jan 01, 2024 9:19 pm
Forum: RouterBOARD hardware
Topic: x86 Mikrotik v7 performance - choosing the x86 CPU
Replies: 9
Views: 5856

Re: x86 Mikrotik v7 performance - choosing the x86 CPU

I am using baremetal with Mellanox ConnectX-5 series. I initially tried newer Intel cards but had odd issues. Support stated that there were issues with the Intel driver so I swapped over to Mellanox and haven't had any issues since. The other stuff to keep in mind is NUMA. I converted my dual cpu ...
by PortalNET
Mon Jan 01, 2024 9:01 pm
Forum: Forwarding Protocols
Topic: IS-IS
Replies: 134
Views: 53366

Re: IS-IS

So any news on the CPU version Ampere mikrotik will use? at leat they have more cpus, highger clock-rates.. are they trying to reach high performance now.. similar to V7 with XEON E5-2699v4 models? hehehe.. i hope they really make further support for newer AMD EPYC cpus also on mikrotik... 128 Cores...
by PortalNET
Sat Dec 16, 2023 5:43 am
Forum: RouterBOARD hardware
Topic: x86 Mikrotik v7 performance - choosing the x86 CPU
Replies: 9
Views: 5856

Re: x86 Mikrotik v7 performance - choosing the x86 CPU

Hi could you please share RouterOS V7? CHR? or BareMetal? And which SFP+ NICs are you using? i am having troubles with a old R620 with E5-2697v2 cpus.. 128GB ram.. and Intel X520 cards.. getting RX-ERRORS.. on low traffic average 130Mbps.. i did run bandwidth test prior from 2 ccrs1036 via crs317 s...
by PortalNET
Sat Dec 16, 2023 5:41 am
Forum: RouterBOARD hardware
Topic: x86 Mikrotik v7 performance - choosing the x86 CPU
Replies: 9
Views: 5856

Re: x86 Mikrotik v7 performance - choosing the x86 CPU

A suggestion is to start by focusing on the network interface which is generally the most crucial component whether is used as "bare metal" or as a virtual Network Interface Card (vNIC) in CHR. A well-developed driver is also a prerequisite and can be a showstopper determining whether the...
by PortalNET
Fri Dec 15, 2023 4:03 pm
Forum: RouterBOARD hardware
Topic: x86 Mikrotik v7 performance - choosing the x86 CPU
Replies: 9
Views: 5856

Re: x86 Mikrotik v7 performance - choosing the x86 CPU

I have 4 x RouterOS v7 bare metal routers running on Intel E5-2699 CPU. They load a full Internet BGP table in like 15-20 seconds. 10G both direction (20G aggregate)tcp speedtest in winbox from Mikrotik to Mikrotik (both E5-2699) is 20% load. Hi could you please share RouterOS V7? CHR? or BareMetal...
by PortalNET
Fri Dec 15, 2023 2:49 pm
Forum: Announcements
Topic: v7.12.1 [stable] is released!
Replies: 252
Views: 95293

Re: v7.12 [stable] is released!

This problem can be solved. Go to the Interface Queues section. Select the interfaces where there are errors and change the queue type from "only-hardware-queue" to "mq-pfifo" and set the limit to 5000. Hi ok so i did further testing... upgraded intel i350, i340, x520, x540 card...
by PortalNET
Wed Dec 13, 2023 4:21 pm
Forum: Announcements
Topic: v7.12.1 [stable] is released!
Replies: 252
Views: 95293

Re: v7.12 [stable] is released!

Hiya it looks like i am not the only one having issues then? I am running V7.12.1 stable.. just realized also... i was having queue drops and rx-erros.. queue drops increase i have fixed it using interface queues changing hardware defaul queue to multi-queue-ethernet-default.. but the RX-errors sti...
by PortalNET
Tue Dec 12, 2023 1:54 pm
Forum: General
Topic: HW offload and PPPoE - low speed.
Replies: 17
Views: 10908

Re: HW offload and PPPoE - low speed.

Hello unfortunatelly no solution which is the strangest.. we tried changing the queue-type default from PFIFO 10 or PFIFO 50 to SFQ with perturb 5 and allot 1514.. we got initially better results up to 400mbp download.. but nothing better then that... the odd part is PPPOE-sever running.. secret se...
by PortalNET
Mon Dec 11, 2023 8:56 pm
Forum: SwOS
Topic: TX pauses frame with flow control disable
Replies: 16
Views: 22320

Re: TX pauses frame with flow control disable

I know this is an old thread but I was able to correct the pause problems on my RB260GSP's easily and wanted to share. I was consistently experiencing pauses for 90% of 64k packets, so I would have 3mil packets with 2.6mil pauses on my VLAN Trunk ports. I found the RBs on the other end of those Tru...
by PortalNET
Mon Dec 11, 2023 1:09 am
Forum: General
Topic: Interface packet Drops on an octacore xeon with intel nics
Replies: 32
Views: 20702

Re: Interface packet Drops on an octacore xeon with intel nics

Hi :) - What is the queue of the ether1 interface ? If you increase it, do you have less TX Drops ? Change from only-hardware-queue to some Queue type multi-queue-ethernet-default and increase from 50 to 1000 only for test ? (could add jitter for those packets that will not be dropped anymore which...
by PortalNET
Mon Dec 11, 2023 12:48 am
Forum: RouterBOARD hardware
Topic: Problems with X520-DA2
Replies: 3
Views: 4363

Re: Problems with X520-DA2

Hi guys as an update i am also experiencing the same issue described on top... after few hours or days running the Port stops crashes and stops responding we are running RoS v7.12 stable with L6 license acquired from mikrotik.. We are running Dell R620 server with over 1K pppoe sessions.. and RX-dro...
by PortalNET
Mon Dec 11, 2023 12:31 am
Forum: General
Topic: Interface queue type
Replies: 11
Views: 13998

Re: Interface queue type

The queue type (kind) is about packet buffering and packet processing mechanism. IMHO, PCQ (default size) performs best, offering both zero-packet loss and lowest ping/jitter. //queue type set [find name=default] kind=pcq /queue interface set [find] queue=default /queue simple set [find] queue=defa...
by PortalNET
Fri Dec 08, 2023 4:57 am
Forum: Announcements
Topic: v7.12.1 [stable] is released!
Replies: 252
Views: 95293

Re: v7.12 [stable] is released!

After upgrade to RouterOS v7.12, my router on x86 experiencing RX errors on 10Gb interface on Intel X520 card. Can anybody help me to solve this problem? Hiya it looks like i am not the only one having issues then? I am running V7.12.1 stable.. just realized also... i was having queue drops and rx-...
by PortalNET
Thu Dec 07, 2023 11:43 pm
Forum: Virtualization
Topic: CHR tx-queue-drops-per-second
Replies: 7
Views: 9337

Re: CHR tx-queue-drops-per-second

Just a suggestion:- try to change change the queue type to multi-queue-ethernet and also look into how to enable that for the nic via the hypervisor / Vmware. Hi guys i am having the same issue on RoS V7.12 x64bits running with 2 intel X520 da2 cards.. anyone find a fix for that? on interface queue...
by PortalNET
Sun Dec 03, 2023 10:07 pm
Forum: RouterBOARD hardware
Topic: Problems with X520-DA2
Replies: 3
Views: 4363

Re: Problems with X520-DA2

Hi guys it looks like i have the same problem, all the Fiber nics 10gbps, 40gbps inserted on the Mikrotik RoS 7.12.1 stable... have mtu 0.. so how raising MTU from 1500 to 1598 for example will increase the L2MTU if it still shows 0 ? AS L2MTU its meant to use on VLANs, MPLS etc.. MTU vs L2MTU: L2MT...
by PortalNET
Sun Dec 03, 2023 9:46 pm
Forum: Announcements
Topic: v7.12.1 [stable] is released!
Replies: 252
Views: 95293

Re: v7.12.1 [stable] is released! server x64bits L2MTU issue

Hi guys

i am having issue in changing the L2MTU on V7.12.1 X64

Running 2 cards Intel XDA-520 and Mellanox Card dual 40Gbps all nics show up the same MTU 1500 and L2MTU 0 i cannot change the L2MTU.. is this done automatically? how can i change the L2MTU manually?
MTU.png
by PortalNET
Sun Dec 03, 2023 5:00 am
Forum: General
Topic: Disable Packages in RouterOS v7
Replies: 6
Views: 3710

Re: Disable Packages in RouterOS v7

Hi guys.. so here i am also looking for the exact same thing... basically we bought a L6 license for a 48 core dell server Dell 12th gen server.. as we plan to run it as pppoe-server with high volume.. i just came across wireless , wireguard, capsman enabled.. tried to disable it via system packages...
by PortalNET
Sat Nov 11, 2023 4:01 pm
Forum: General
Topic: Mellanox 40Gbp and 100Gb NIC cards issue RoS v7.11
Replies: 3
Views: 807

Re: Mellanox 40Gbp and 100Gb NIC cards issue RoS v7.11

Ok so more tests done..

Memory upgrade on servers to 78GB R420 and 96GB on R620...

somehow it increased the speeds as expected we are now getting 64Gbps aggregate troughput between servers
by PortalNET
Sat Nov 11, 2023 2:03 pm
Forum: General
Topic: Mellanox 40Gbp and 100Gb NIC cards issue RoS v7.11
Replies: 3
Views: 807

Re: Mellanox 40Gbp and 100Gb NIC cards issue RoS v7.11

Ok Guys so i did some more testing and it looks like X16 is 64GBps max... on 8 x 8 gbps.. just need to figure out on how to fine tune this based on the CPUs cores 48threads and 2nd server 40threds it should work fine.. so far i could get around 34Gbps aggregate speeds on TCP using 100G NIC on one si...
by PortalNET
Sat Nov 11, 2023 1:50 pm
Forum: RouterBOARD hardware
Topic: CCR1072/1036 vs. CCR2116 with 2000x PPPoE
Replies: 31
Views: 15425

Re: CCR1072/1036 vs. CCR2116 with 2000x PPPoE

@PortalNET PPPoE is an encapsulation protocol, it made sense in the era of hubs and massive L2 domains back in 1998 with DSL era. Now we are living in PON world with QinQ/VLAN support. There's no reason to use PPPoE except to stick to an outdated protocol just as many do with IPv4 instead of IPv6. ...
by PortalNET
Fri Nov 10, 2023 5:13 pm
Forum: RouterOS beta
Topic: ROS v7 - SERVER with 2 interfaces 40G - Melanox CX354A
Replies: 9
Views: 4550

Re: ROS v7 - SERVER with 2 interfaces 40G - Melanox CX354A

Hi ok guys so after some more searching it looks like its a hardware limitation on the Dell R620 and R420 sides... based on the speeds of the PCI-e 3.0 slots.. of max 16G aparently there are some tweaks available and tunning but it seems to be base on the R630 and R730.. so next stepp will try to ge...
by PortalNET
Fri Nov 10, 2023 5:05 pm
Forum: RouterOS beta
Topic: ROS v7 - SERVER with 2 interfaces 40G - Melanox CX354A
Replies: 9
Views: 4550

Re: ROS v7 - SERVER with 2 interfaces 40G - Melanox CX354A

Hi guys continuing testing.. it seems that advertise on Mikrotik running the MCX354A-FCBT in ethernet mode switch... advertises ports as 5G FULL.. strange.. even disabling auto-negotiation and seting 40Gbps... it wont go past 5gbps in TCP.. in UDP it goes both tx and rx in 9.8GB forward test.. i am ...
by PortalNET
Fri Nov 10, 2023 1:26 am
Forum: General
Topic: Mellanox 40Gbp and 100Gb NIC cards issue RoS v7.11
Replies: 3
Views: 807

Mellanox 40Gbp and 100Gb NIC cards issue RoS v7.11

Hi guys I am having some troubles in testing some routerOS x86_64 hardwares. we have setup 2 dell servers R620 and R420.. setup R420 2 E5-2470v2 cpus.. for full capacity + mellanox MXC354-FCBT dual port 40GB (with firmwware upgradede and switched to ethernet mode) setup2 R620 with 2 E5-2697v2 cpus +...
by PortalNET
Fri Nov 10, 2023 1:21 am
Forum: RouterOS beta
Topic: ROS v7 - SERVER with 2 interfaces 40G - Melanox CX354A
Replies: 9
Views: 4550

Re: ROS v7 - SERVER with 2 interfaces 40G - Melanox CX354A

Hi guys Sorry to bump on a old thread.. but i am having the following issue... we have setup 2 dell servers R620 and R420.. setup R420 2 E5-2470v2 cpus.. for full capacity + mellanox MXC354-FCBT dual port 40GB (with firmwware upgradede and switched to ethernet mode) setup2 R620 with 2 E5-2697v2 cpus...
by PortalNET
Fri Nov 10, 2023 1:12 am
Forum: Announcements
Topic: v7.12.1 [stable] is released!
Replies: 252
Views: 95293

Re: v7.12 [stable] is released!

Will try it out tomorrow on our test servers.. as i just came to the forum related to other speed issue on our servers Mellanox 40Gbps and 100Gbps adapter cards running ethernet mode.. speed issues..

will try it out tomorrow.
by PortalNET
Fri Oct 27, 2023 11:48 pm
Forum: General
Topic: SCSI and SAS support in RouterOS
Replies: 104
Views: 43179

Re: SCSI and SAS support in RouterOS

Hi guys

looks like perc6/e also not supported .. i am trying to install from v6 up to v7 images via usb pendrive on a disk raid0 on perc6/e controller on a Dell R710.. and it allways get stuck on FATAL ERROR no CD-ROM found..
by PortalNET
Sat Oct 21, 2023 6:01 pm
Forum: General
Topic: RouterOS v7 x86_64 best hdd available? SSD enterprise? nvme ?
Replies: 3
Views: 843

Re: RouterOS v7 x86_64 best hdd available? SSD enterprise? nvme ?

Use whichever actually work with ROS. I don't know how is v7 support for storage, v6 was less than stellar in this regard. I'm not running any kind of similar setup, so I don't have 1st hand experience. But AFAIK ROS only uses permanent storage for own files, config and some limited amount of volat...
by PortalNET
Sat Oct 21, 2023 4:59 pm
Forum: General
Topic: RouterOS v7 x86_64 best hdd available? SSD enterprise? nvme ?
Replies: 3
Views: 843

RouterOS v7 x86_64 best hdd available? SSD enterprise? nvme ?

Hi guys we have a couple of Servers available R630, R730s with E5-2699v4 dual cpus.. we are planning to make some testing on a BGP solution with routerOS v7.. we have already the 100G network cards available and compatible.. now before we go ahead and buy the L6 licenses.. we are searching for a bes...
by PortalNET
Sat Oct 21, 2023 4:55 pm
Forum: Virtualization
Topic: 10g solarflare & mellanox Nics Supported??
Replies: 9
Views: 4423

Re: 10g solarflare & mellanox Nics Supported??

hi, does anyone know if some of these sfp+ nics are supported?? solarflare sfn7122 solarflare sfn5122 mellanox cx312a (connectx3) Hi yes they work.. directly on router os v7.. i can also confirm Mellanox 40gbps works.. and mellanox 100GBps card works but you have to go into nvidia to downlaod lates...
by PortalNET
Sat Sep 02, 2023 4:54 pm
Forum: General
Topic: RouterOS v7 BCM57840 quad-port SFP+ 10G X86 support
Replies: 1
Views: 1448

RouterOS v7 BCM57840 quad-port SFP+ 10G X86 support

Hi

i would like to request support for BCM57840 quad-port 10G sfp+ support drivers on RouterOS v7..

its showing on the PCI but ports are not available on ethernet or interfaces..

any chance of adding support for this Broadcom Netextreme II cards?
by PortalNET
Sat Sep 02, 2023 4:50 pm
Forum: General
Topic: ROS X86 10G SFP+ issue
Replies: 14
Views: 2809

Re: ROS X86 10G SFP+ issue

Hi guys i am having troubles also in getting the Brocadom BCM57840 QUAD PORT SFP+ 10g to work its not recognized in the RoS 7.1.11 latest stable version. aldo the other dual port SFP+10g broadcom BCM57711 is recognized and working well in 7.1.11 i tought of swapping the 2 port with a 4 port card, bu...
by PortalNET
Fri Sep 01, 2023 3:26 pm
Forum: RouterOS beta
Topic: 100 G Network Cards // Driver
Replies: 13
Views: 6963

Re: 100 G Network Cards // Driver

Connectx-4 40G or 100G not working. Will there be any update for these drivers? Hi aparently it will work but you need to switch Card driver mode to Ethernet.. i Can confirm that RouterOS v7 is also working 100% with Mellanox ConnectX-3 cx354a at first when the card arrived, after inserting on the ...
by PortalNET
Thu Aug 10, 2023 3:03 am
Forum: RouterBOARD hardware
Topic: RouterOS X86_64 v7 100G MCX416A-CCAT ConnectX-4 support?
Replies: 0
Views: 3067

RouterOS X86_64 v7 100G MCX416A-CCAT ConnectX-4 support?

Hi guys i have come across this Mellanox MCX416A-CCAT ConnectX-4 Dual-port 100G for a affordable prices, is this card compatible with RouterOS v7 x86_64? not CHR virtualization o mean Bare metal on v7 version? Includes: 1 x Mellanox ConnectX-4 CX416A 2-Port 100GbE QSFP28 Network Adapter MCX416A-CCAT...
by PortalNET
Thu Aug 10, 2023 2:50 am
Forum: RouterBOARD hardware
Topic: Actual Driver Support 40G Cards on ROS 6.47.x/6.48x
Replies: 15
Views: 6794

Re: Actual Driver Support 40G Cards on ROS 6.47.x/6.48x

Hi

has anyone tried the MCX416A-CCAT ConnectX-4 on RouterOS V7? i have found some pretty good deal prices on this cards i was wondering if this would be supported on RouterOS x86_64 v7
by PortalNET
Thu Aug 10, 2023 2:45 am
Forum: General
Topic: Forum LOCKED? why nearly almost topics showing locked?
Replies: 3
Views: 900

Forum LOCKED? why nearly almost topics showing locked?

Hi guys

about 90% Of the Forum topics seem to be closed.. locked.. any special information we are all missing?
by PortalNET
Thu Aug 10, 2023 2:44 am
Forum: General
Topic: Forum moderation volunteers
Replies: 238
Views: 37544

Re: Forum moderation volunteers

Hi guys is the forum Locked?

i am trying to access and reply on different topics, and all showing up LOCKED.
by PortalNET
Wed Jul 19, 2023 6:46 pm
Forum: General
Topic: PPPoE free authentication
Replies: 12
Views: 6023

Re: PPPoE free authentication

You can use freeradius and set "default Auth-Type := Accept" into users file!!! Hi i am trying to set this to allow all radius to login on a specific server.. but cannot find users files.. only have clients.conf and radiusd.conf.. u mean clients.conf file? because i am using mysql db to a...
by PortalNET
Thu Jun 22, 2023 7:07 am
Forum: RouterOS beta
Topic: 100 G Network Cards // Driver
Replies: 13
Views: 6963

Re: 100 G Network Cards // Driver

Mellanox and Chelsio adapters work with v7. I have personally tested Mellanox CX516A and CX515A as well as Chelsio T62100-SO-CR others should work as well. Keep in mind that only Ethernet mode is supported, if adapter is in Infiband mode, it has to be "switched" to Ethernet mode beforehan...
by PortalNET
Wed May 24, 2023 1:16 am
Forum: Forwarding Protocols
Topic: [Stability] Multiple PPPoE servers (+10) at the same router - Is there any alternatives?
Replies: 10
Views: 6914

Re: [Stability] Multiple PPPoE servers (+10) at the same router - Is there any alternatives?

You're overthinking it. There will be zero difference in CPU usage. PPPoE sessions terminate and then must hit the routers CPU. No they are not tied to individual cores or anything like that Just throw everything into a bridge with a horizon value (same on all) to avoid traffic flowing between cust...
by PortalNET
Thu May 18, 2023 3:28 am
Forum: RouterOS beta
Topic: RouterOS 7.0beta4 with Mellanox CX515A
Replies: 7
Views: 8115

Re: RouterOS 7.0beta4 with Mellanox CX515A

Hi guys sorry to bump into old thread

can anyone confirm is this NIC Mellanox ConnectX-3 cx354a 40gbe qsfp MCX354A-FCBT is compatible with routerOS?
by PortalNET
Wed May 17, 2023 3:05 pm
Forum: RouterBOARD hardware
Topic: recommendation to x86 hardware?
Replies: 8
Views: 8429

Re: recommendation to x86 hardware?

We found funny specificity when using x86_64 on server platform. Example. We have server Dell R720 with next hardware setup (one of typical NATs per 2k users): - 2 CPUs x Xeon E5-2650L v2 - basic clock 1,70 GHz - turbo boost 2.0 up to 2,10 GHz - 10 cores / 20 threads per CPU - 25 MB smart cache per...
by PortalNET
Wed May 17, 2023 3:00 pm
Forum: General
Topic: 10 Gbps SFP + RouterOS Compatible NICs
Replies: 4
Views: 2686

Re: 10 Gbps SFP + RouterOS Compatible NICs

Regarding NIC support (which includes 10Gbps NICs) there are 3 ROS variants: ROS v6 x86 Due to age of ROSv6 and underlying linux kernel it generally lacks support for newer devices. Which (sadly) includes most 10Gbps NICs apart from NIC based on early chipsets. Nothing much will change about suppor...
by PortalNET
Sat May 13, 2023 1:27 am
Forum: Virtualization
Topic: CHR or classic x86 ROS on isolated ESXi?
Replies: 6
Views: 2986

Re: CHR or classic x86 ROS on isolated ESXi?

Hi guys so we got hold of an old R910 with 4 cpus. Each 10Core/20threads total 40core/80threads 2.8Ghz speed intel xeon We have decided to give it a go on RouterOS V7 x64 direct install on the machine, my only doubt now is the fully compatible 10g sfp+ Fiber NIC cards 100% compatible with Mikrotik x...
by PortalNET
Thu May 11, 2023 11:51 pm
Forum: General
Topic: CCR2004 Max PPPOE Users
Replies: 3
Views: 1464

Re: CCR2004 Max PPPOE Users

Hi, Honestly, I don't have a magic number for you on my 6 months experience with MT on a similar scenario from you we were able to push at least 1K user and counting from two CCR1036 one is dedicated as PPPoE server and the other is doing plain NAT. On the PPPoE server we disable connection trackin...
by PortalNET
Thu May 11, 2023 3:56 pm
Forum: Forwarding Protocols
Topic: [Stability] Multiple PPPoE servers (+10) at the same router - Is there any alternatives?
Replies: 10
Views: 6914

Re: [Stability] Multiple PPPoE servers (+10) at the same router - Is there any alternatives?

For sure, use one PPPoE Server per VLAN. Much better than bridge them Hi guys sorry to bump into an old topic.. but this somehowe has confused me now.. i have the following scenario ATM..and i have some doubts regarding cpu usage and pppoe-server we have a deployed scenario with CCR1036 2SFP+ model...
by PortalNET
Sun Apr 16, 2023 9:41 pm
Forum: General
Topic: Mikrotik PPPoE Rate limit greater than 400 Mb
Replies: 2
Views: 1998

Re: Mikrotik PPPoE Rate limit greater than 400 Mb

Hi guy old topic.. but we have same sort of issue..or at least similar our issue is on WIFI.. on cable pppoe goes easy 800 to 900mbps fia fiber GPON olt connected on 10G uplink direct to sfp+2 on ccr1036 where pppoe-server is setup.. but problem is on wifi6 ax.. and wifi5ghz.. cannot go over 400mbps...
by PortalNET
Sun Apr 16, 2023 8:42 pm
Forum: General
Topic: HW offload and PPPoE - low speed.
Replies: 17
Views: 10908

Re: HW offload and PPPoE - low speed.

Hi, We have the same problem did you fix it on your setup? Hello unfortunatelly no solution which is the strangest.. we tried changing the queue-type default from PFIFO 10 or PFIFO 50 to SFQ with perturb 5 and allot 1514.. we got initially better results up to 400mbp download.. but nothing better t...
by PortalNET
Wed Apr 12, 2023 4:36 am
Forum: RouterOS beta
Topic: 100 G Network Cards // Driver
Replies: 13
Views: 6963

Re: 100 G Network Cards // Driver

hi guys

any updates on NIC cards with 40G and 100G support in RoS v7 ?

i am planning on testing this model Qsfp28 Pci 3.0 X16 0n64d3 Omni Path on a Dell R730 but not sure if its worth spending $$ buying for testing without support.
by PortalNET
Wed Apr 05, 2023 4:50 am
Forum: General
Topic: Mikrotik Router OS not installing on Dell PowerEdge 620
Replies: 3
Views: 1446

Re: Mikrotik Router OS not installing on Dell PowerEdge 620

supports only ide disks What do you expect to do with RouterOS on Dell? I want to Install Mikrotik Router OS on Dell Poweredge Bairbone, not willing to install it on Xen or Vmware I know it might be late.. but disable, raid , perc remove.. just install SSD or HDD SATA VIA sata cable connector on mo...
by PortalNET
Tue Apr 04, 2023 4:58 am
Forum: SwOS
Topic: Problems with IPv6 Prefix Delegation on CSS610-8G-2S+ [SOLVED]
Replies: 22
Views: 5630

Re: Problems with IPv6 Prefix Delegation on CSS610-8G-2S+ [SOLVED]

I know lol. Support didn't explicitly say that but after what they wrote it appears as if that is already a known issue to them: Hello,  Thank you for the reply! This is a software issue and we look forward to fixing it in future SwOS lite releases, but I cannot share the release date. Best regards...
by PortalNET
Sat Apr 01, 2023 3:36 am
Forum: SwOS
Topic: SwitchOS 2.13 Mikrotik CRS317 Default MTU size ?? [SOLVED]
Replies: 0
Views: 2691

SwitchOS 2.13 Mikrotik CRS317 Default MTU size ?? [SOLVED]

Hi guys i know this is odd but i have not found any information on the SwitchOS description infos... I would like to know the default MTU size set on the SFP+ interfaces on the CRS317 running switchOS mode.. because its not displayed in any of the menus avaiable is it MTU1500 ? is it L2MTU 1598 ? ju...
by PortalNET
Sat Mar 25, 2023 9:38 pm
Forum: SwOS
Topic: SwitchOS not forwaring IPV6 packets from one CCR to another
Replies: 6
Views: 2546

Re: SwitchOS not forwaring IPV6 packets from one CCR to another

try enabling flood unknown multicast
Hiya

i did tried it.. enabled on all ports.. but it did not connect neither could ping from one device to another..
by PortalNET
Sat Mar 25, 2023 9:24 pm
Forum: SwOS
Topic: SwitchOS not forwaring IPV6 packets from one CCR to another
Replies: 6
Views: 2546

Re: SwitchOS not forwaring IPV6 packets from one CCR to another

try enabling flood unknown multicast
Hi..

will give it a try later and post output results.
by PortalNET
Sat Mar 25, 2023 9:07 pm
Forum: Announcements
Topic: v7.8 [stable] is released!
Replies: 425
Views: 140601

Re: v7.8 [stable] is released!

Router OS support plans for HP dual SFP+ 10G card? Hi guys i am trying out the x64 bits RoS v7 stable on and old PC servers.. just to compare some results with CCRs so far so good.. pretty impressive results on the troughout internal core cpus.. as it shows 24 cores as described on the picture below...
by PortalNET
Wed Mar 22, 2023 5:48 pm
Forum: SwOS
Topic: SwitchOS not forwaring IPV6 packets from one CCR to another
Replies: 6
Views: 2546

Re: SwitchOS not forwaring IPV6 packets from one CCR to another

TL;DR ... if you have IGMP snooping enabled on switches, disable it and see if it works then. I don't have first-hand experience with SwOS, but AFAIK IGMP snooping on both SwOS and ROS is broken and breaks IPv6. At least that was the case in ROS v6 and I haven't checked it with recent ROS versions....
by PortalNET
Wed Mar 22, 2023 4:28 pm
Forum: Announcements
Topic: SwOS version 2.13 released!
Replies: 63
Views: 296271

Re: SwOS version 2.13 released!

OK so i have checked IGMP.. seems to be disabled all blank, nothing showing up on the IGMP menu.. i check ACls menu also blank nothing added or saved in the Menu as pictures below described.. other options RSTP is disabled also i have disabled it.. type EDGE showing as on picture.. its running on ST...
by PortalNET
Wed Mar 22, 2023 4:19 pm
Forum: Announcements
Topic: SwOS version 2.13 released!
Replies: 63
Views: 296271

Re: SwOS version 2.13 released!

ACLs or anything that messes with multicast? igmp snooping etc.
hmmm i think igmp snooping is disabled on the switchOS i will check in the menu.. does it need to be ON or off?

does multicast need to be ON ? or off ?
by PortalNET
Tue Mar 21, 2023 5:36 pm
Forum: Announcements
Topic: SwOS version 2.13 released!
Replies: 63
Views: 296271

Re: SwOS version 2.13 released!

Hi guys i have 2 CRS devices.. running in switchOS mode.. 1 crs305 and 1 crs317 both running 2.13 firmware latest upgraded... and on both sides we have CCR1036 running long term 6.48.6.. all connected in 10G spf+ both ends.. i have setup static route ipv4.. and working 100% i tried setting up ipv6 /...
by PortalNET
Tue Mar 21, 2023 3:56 am
Forum: SwOS
Topic: SwitchOS not forwaring IPV6 packets from one CCR to another
Replies: 6
Views: 2546

Re: SwitchOS not forwaring IPV6 packets from one CCR to another

what makes me more confused is the 2.13 firmware details txt which states the following

*) always forward link local IPv4 & IPV6 packets;

what would it means? it can only forward packtes in link local?
by PortalNET
Tue Mar 21, 2023 3:34 am
Forum: SwOS
Topic: SwitchOS not forwaring IPV6 packets from one CCR to another
Replies: 6
Views: 2546

SwitchOS not forwaring IPV6 packets from one CCR to another

Hi guys we have a CRS317 on point A and a CRS305 on Point B..and connected on boths CRS devices running switchOS mode.. we have 2 CCRs1036 on both sides.. both devices are connected via IPv4 on 10G SFP+ ports.. now i have setup a ipv6 1/126 IP on BGP point A... and 2/126 IP on BRAS PointB device... ...
by PortalNET
Mon Mar 20, 2023 12:53 am
Forum: RouterBOARD hardware
Topic: CCR1072/1036 vs. CCR2116 with 2000x PPPoE
Replies: 31
Views: 15425

Re: CCR1072/1036 vs. CCR2116 with 2000x PPPoE

Or move to DHCP and dump PPPoE. PPPoE has MTU and CPU overhead due to encapsulation, DHCP does not have any such issues.
I would dump PPPoE, but my radius/billing software is limited on other ways to AAA dhe dhcp clients.
Same problem here..stuck on radius because of that.
by PortalNET
Mon Mar 20, 2023 12:51 am
Forum: RouterBOARD hardware
Topic: CCR1072/1036 vs. CCR2116 with 2000x PPPoE
Replies: 31
Views: 15425

Re: CCR1072/1036 vs. CCR2116 with 2000x PPPoE

Or move to DHCP and dump PPPoE. PPPoE has MTU and CPU overhead due to encapsulation, DHCP does not have any such issues. Hi i know its an old thread.. but called my attention on your post.. could you elaborate a litle bit more on that? i am running a 1036 2S+ rev2 just running PPPOE and i am having...
by PortalNET
Mon Mar 20, 2023 12:03 am
Forum: General
Topic: HW offload and PPPoE - low speed.
Replies: 17
Views: 10908

Re: HW offload and PPPoE - low speed.

I'm experiencing the same thing, pppoe also. Were you able ger to the bottom of whata happening here? Hi guys i know this is an old thread.. but basically i am facing a similar issue but on another hardware i am having the issue on a CCR1036 2S+ model 8GB ram rev2 version. i am running ROS 6.48.x l...
by PortalNET
Sun Mar 19, 2023 11:24 pm
Forum: RouterBOARD hardware
Topic: Actual Driver Support 40G Cards on ROS 6.47.x/6.48x
Replies: 15
Views: 6794

Re: Actual Driver Support 40G Cards on ROS 6.47.x/6.48x

Please, can you say about your x86 router status? How many traffic real time? BGP? OSPF? CGNat? Pppoe server? We run 5x NCA-5520A (with 1 x Intel Xeon Silver 4215R and 3x NCS2-IXM405A) on ROS 6.84.6 as BRAS with max 8000 Session per System (average Users per System: ~ 4000). In case of maintance or...
by PortalNET
Sat Mar 18, 2023 2:50 pm
Forum: General
Topic: FQ_Codel and Mikrotik CCR CPU Utilization
Replies: 39
Views: 6768

Re: FQ_Codel and Mikrotik CCR CPU Utilization

I would just implement it and go measure, and be ready to roll back. Pound it flat with artificial traffic at 4am? (I am one of the authors of fq_codel and cake, but I do not have enough data either, on how well this stuff scales on given bits of mikrotik hardware). In most cases it is the per cust...
by PortalNET
Sat Mar 18, 2023 2:43 pm
Forum: General
Topic: CCR1036-2S+ PPPOE-SERVER 600 users fiber with wifi-speed issues on wifi6
Replies: 4
Views: 1241

Re: CCR1036-2S+ PPPOE-SERVER 600 users fiber with wifi-speed issues on wifi6

i have setup a pppoe-server specific on that CCR1036 ethernet port.. just with the router wifi6.. and just with profile default from mikrotik with no limits.. max speed download wifi 300 ao 390mbps.. and upload speeds up to 700mbps .. tested with custom specific profiles created for 500mbps and 600...
by PortalNET
Fri Mar 17, 2023 6:35 pm
Forum: General
Topic: CCR1036-2S+ PPPOE-SERVER 600 users fiber with wifi-speed issues on wifi6
Replies: 4
Views: 1241

CCR1036-2S+ PPPOE-SERVER 600 users fiber with wifi-speed issues on wifi6

Hi guys i have an odd issue we are currently using a 1036 2S+ Core router being used as PPPOE-SERVER.. our clients are all fiber connections with speeds 300mbps and 500mbps plans... our OLTs have uplink 10G port.. connected to 1036 sfp+ port with specific vlan tagged mode.. our ONU devices are all b...
by PortalNET
Fri Feb 10, 2023 4:31 am
Forum: SwOS
Topic: IPv6 support for SwOS
Replies: 3
Views: 6757

Re: IPv6 support for SwOS

I guys i know this is an old thread.. but i have a similar issue.. we have 2 CCR devices connected on a static route.. Point A to Point B in Ipv4 working great.. inside a VLAN and this CCRs connect to switchOS CRS305 and 317 due to use of SFP+10g ports.. now i am trying to setup a IPv6 PTP from poin...
by PortalNET
Tue Jan 31, 2023 11:31 pm
Forum: RouterBOARD hardware
Topic: CRS309-1G-8S+: Poor PPPoE performance
Replies: 8
Views: 3516

Re: CRS309-1G-8S+: Poor PPPoE performance

Hi guys.. sorry for hijack this thread but we have some interesting results for PPPOE-server and PPPOe clients on some devices i would like to know if someone else is facing the same issue.. we currently have some PPPOE-servers CCR1036 with 2SFP+ 10G ports.. SFP+1 WAN link from BGP with specific VLA...
by PortalNET
Mon Dec 26, 2022 10:35 pm
Forum: Scripting
Topic: Telegram bot message when internet is down.
Replies: 6
Views: 3512

Re: Telegram bot message when internet is down.

Hello! I have an idea to run on my MT script which will send me telegram message when it is NO internet on it or MT switched off =) Sounds interesting, doesn't it? How MT will send a message if it is down or no internet? But I have an idea! When router loaded and have an internet - it will send me ...
by PortalNET
Sat Dec 24, 2022 3:22 am
Forum: Scripting
Topic: Mikrotik and Telegram
Replies: 43
Views: 38315

Re: Mikrotik and Telegram

Hi guys first of all let me say big thanks for this topic.. i made both scripts run, on telegram and configured the /setcommands and i can get communication from telegram to mikrotik and vice-versa.. now if i want to print traffic from specific interface on the mikrotik is there any ready scripts av...
by PortalNET
Mon Oct 24, 2022 11:40 pm
Forum: General
Topic: Severe port flapping on CRS328-24P-4S+ and CRS317-1G-16S+
Replies: 217
Views: 70870

Re: Severe port flapping on CRS328-24P-4S+ and CRS317-1G-16S+

Hi guys i know this is an old thread but we have the same problem with switch CRS328 on the 4 ports sfp+ ports flapping all the time.. if we plug the same gbic for 10gbps on our switch CRS305 it link 10gbps normal with no issue at all and they work normally, but we need to expand and we bought 2 CRS...
by PortalNET
Thu Sep 29, 2022 11:30 pm
Forum: Forwarding Protocols
Topic: OSPF Failure setup ptp between CCR1016 - RB4011 [SOLVED]
Replies: 2
Views: 1973

Re: OSPF Failure setup ptp between CCR1016 - RB4011 [SOLVED]

Hi guys Problem solved, after digging for more information and some reading, i managed to find out that OSFP does not send packets if both devices are being connected via Switch running SwitchOS mode. plugged in cable direcly on both devices on other ether ports and OSFP connected each other.. In or...
by PortalNET
Thu Sep 29, 2022 4:59 am
Forum: SwOS
Topic: Can run OSPF on CRS326-24G-2S+RM
Replies: 5
Views: 5880

Re: Can run OSPF on CRS326-24G-2S+RM

Hi, elbob2002. Do you mean I can run ospf in CRS326-24G-2S+RM only booted with RouterOS. OSPF is a routing protocol. Requires a router. When run under SwitchOS, the CRS326 is functioning as a switch - not a router. Hiya.. first of all let me thank your for your comment as i having problemas setting...
by PortalNET
Thu Sep 29, 2022 4:46 am
Forum: Forwarding Protocols
Topic: OSPF Failure setup ptp between CCR1016 - RB4011 [SOLVED]
Replies: 2
Views: 1973

Re: OSPF Failure setup ptp between CCR1016 - RB4011 [SOLVED]

BTW i am just wondering if this could be a CRS317 Switch issue, as i am running it in SwitchOS mode boot.. in version 2.13.. not sure if this impacts..

as i am using the CRS in the middle to be able to connect both devices using just SFP+ port..
by PortalNET
Thu Sep 29, 2022 3:54 am
Forum: Forwarding Protocols
Topic: OSPF Failure setup ptp between CCR1016 - RB4011 [SOLVED]
Replies: 2
Views: 1973

OSPF Failure setup ptp between CCR1016 - RB4011 [SOLVED]

Hi guys i am having troubles connecting OSFP on PTP mode on 2 devices Device 1 = CCR1016 Device 2 = RB4011 Basically i have both of the devices connected via SFP+ port directly to a Switch CRS317 each one on separate SFP+ port.. Device 1 will be CGNAT and Device 2 will be PPPOE server, i am trying t...
by PortalNET
Tue Sep 20, 2022 5:46 pm
Forum: RouterBOARD hardware
Topic: CCR1036-8g-2s+ R2 extended RAM 16GB only 1 PSU on the unit
Replies: 2
Views: 791

CCR1036-8g-2s+ R2 extended RAM 16GB only 1 PSU on the unit

Hi guys we have recently accquired from a small isp which was sold out, a CCR1036-8-2S+ EM 16GB ram model with 2 slots 8GB ram. we noticed that the motherboard is bigger then the other CCR1036-8-2S+ model which comes with dual PSU.. but unfortunatelly this model only comes with 1 PSU unit output 24v...
by PortalNET
Tue Sep 13, 2022 2:54 am
Forum: General
Topic: Mikrotik DDOS ICMP with SSDP amplification
Replies: 8
Views: 1204

Re: Mikrotik DDOS ICMP with SSDP amplification

Nothing you can do if your pipe is smaller than the attack bandwidth. Has to be mitigated upstream. Yes indeed.. upstream provider is having dificulties.. aparently Wanguard is not being able to mitigate it aparently. wondering if CCR2216 with 100G uplink port.. would be able to soften the hammerin...
by PortalNET
Tue Sep 13, 2022 2:34 am
Forum: General
Topic: Mikrotik DDOS ICMP with SSDP amplification
Replies: 8
Views: 1204

Re: Mikrotik DDOS ICMP with SSDP amplification

Since you've got a common rule for multiple ports, it is not possible to say whether it counts the SSDP packets or the other ones. Create separate rules (TCP, UDP) with dst-port=1900 alone and place it before the common one. But that's only for analysis, otherwise it should work the way you've set ...
by PortalNET
Tue Sep 13, 2022 2:11 am
Forum: General
Topic: Mikrotik DDOS ICMP with SSDP amplification
Replies: 8
Views: 1204

Re: Mikrotik DDOS ICMP with SSDP amplification

What is attracting the attacks....... specific servers??
well they are attacking full ASN IPs.. all blocks /24 being attacked with thousands of spoofed ips.. with random ports ICMP packages with lenghts 161 and 70bytes.. with that ssdp inside.
by PortalNET
Mon Sep 12, 2022 4:01 pm
Forum: General
Topic: Mikrotik DDOS ICMP with SSDP amplification
Replies: 8
Views: 1204

Re: Mikrotik DDOS ICMP with SSDP amplification

What is the output of /ip firewall raw print and /ip firewall raw print stats. If the requests are properly dropped, RouterOS should not be sending any ICMP packets back.

Hi

attached pic of IP firewall RAW.. Image
by PortalNET
Mon Sep 12, 2022 3:15 am
Forum: General
Topic: Mikrotik DDOS ICMP with SSDP amplification
Replies: 8
Views: 1204

Mikrotik DDOS ICMP with SSDP amplification

Hi guys some ISP using mikrotik are getting attacked with DDOS with SSDP... some peaks of 50gbps, any ideas on how to mitigate this?? the Upstream provider is having some dificulties also... below some pics of traffic packet sniffer during the attack whilst all CPU cores on 1036 and 1072 jam at 100%...
by PortalNET
Sat Sep 10, 2022 3:14 am
Forum: General
Topic: TCP SYN Flood attack causing high cpu
Replies: 23
Views: 22523

Re: TCP SYN Flood attack causing high cpu

Hi guys i know this is an old thread, but somehow fits my problem description we are getting the same flavour of attack.. both 1016 and 1036 max out cpu.. BGP and PPPOE servers.. the attacks only last average 20 seconds.. then stop.. our main backhaul internet provider told us that the attack monito...
by PortalNET
Thu Aug 04, 2022 3:29 pm
Forum: RouterBOARD hardware
Topic: New High Performance Routers ! ?
Replies: 85
Views: 26536

Re: New High Performance Routers ! ?

We use 5x X86 as BRAS System, each System does 3k PPPoE Users (CPU is at 20%). We use this Systems with XEON (XEON E5-1650v4): https://www.landitec.com/products/x86-network-appliance-hardware/rackmount-appliances/nca-5510-detail/ And 10G Cards: https://www.landitec.com/products/x86-network-applianc...
by PortalNET
Mon Jul 25, 2022 5:34 pm
Forum: General
Topic: CCR1009 SFP+10g pppoe-server optimization lower CPU
Replies: 2
Views: 811

CCR1009 SFP+10g pppoe-server optimization lower CPU

Hi guys i have found some similar threads but without detailed information we currently have a CCR1009 in deployment with around 650 PPPOE connections fiber clients with isp plans from 100mbps to 600mbps.. on tools profiling we can see firewall draining almost all of the cpus.. so we have removed CG...
by PortalNET
Mon Feb 21, 2022 11:55 pm
Forum: RouterBOARD hardware
Topic: CCR2216-1G-12XS-2XQ (New Flagship)
Replies: 69
Views: 16446

Re: CCR2216-1G-12XS-2XQ (New Flagship)

I think this one is going to be our replacement for CCR1072 s. Any idea on the release date ? https://www.balticnetworks.com/docs/MikroTik-CCR2216-1G-12XS-2XQ-3-Datasheet.pdf https://www.youtube.com/watch?v=7_uLxZYYEpQ OMG........ thats not funny.. mikrotik don´t know how to play anymore.. 2 100G.....
by PortalNET
Wed Jan 12, 2022 9:52 pm
Forum: General
Topic: How to block bots?
Replies: 3
Views: 2790

Re: How to block bots?

Hi guys interesting topic i came across, i have setup a monitoring tool to monitor all our traffic and recently we are seeing alot of traffic from certain IPs.. named bot-smokeloader, bot-ponyloader trying to connect on our ASN network. i was wondering if there is any way to block this traffic manua...
by PortalNET
Tue Oct 05, 2021 12:37 am
Forum: Scripting
Topic: PHP api real time logging /log/print
Replies: 0
Views: 8108

PHP api real time logging /log/print

Hi guys i am trying to write a project, where it fetches all the data from the api via /log/print result.. and stores it on a table in php format. i can output the log now.. but i would like to update it every 5seconds or so, so it could fetch utomaticaly the new logs, but i am kind of lost here.. t...
by PortalNET
Sat Oct 02, 2021 4:39 am
Forum: Scripting
Topic: tx-bytes rx-bytes have spaces and are unusable. Please help (edited and added more info)
Replies: 7
Views: 4558

Re: tx-bytes rx-bytes have spaces and are unusable. Please help (edited and added more info)

Hi guys.. i know its a litle bit late on ansewers, but its better late then never right, ok so my working version of the code to fetch on newer Versions rOS 6.46, 6.47 the total RX-BYTES and TX-BYTES working code below.. if ($API->connect($iphost, $userhost, $pass, $port)) { $stats = $API->comm('/in...
by PortalNET
Fri Oct 01, 2021 11:20 pm
Forum: Scripting
Topic: PHP API ...print...where... ?
Replies: 5
Views: 8516

Re: PHP API ...print...where... ?

Hi guys i know, this is old news and old threats, but as i am working on a new project development ISP Management system with freeradius 3xx and full system monitoring via snmp, api.. we are implementing from scratch a new system, and each time we come across some searches on google it ends up here ...
by PortalNET
Fri Oct 01, 2021 5:01 am
Forum: Scripting
Topic: Mikrotik API “no such command” when trying to get count-only of PPP connections
Replies: 5
Views: 5883

Re: Mikrotik API “no such command” when trying to get count-only of PPP connections

Hi guys just an update managed to get it working with routerOS php api , my cmd was wrong obviously as shown on the previous post working code if ($API->connect($iphost, $userhost, $pass, $port)) { $ARRAY = $API->comm("/ppp/active/print", array("count-only"=> "",)); pri...
by PortalNET
Thu Sep 30, 2021 5:17 am
Forum: Scripting
Topic: Mikrotik API “no such command” when trying to get count-only of PPP connections
Replies: 5
Views: 5883

Re: Mikrotik API “no such command” when trying to get count-only of PPP connections

Hi guys i know this is an old thread, but could someone post the php code, to print the ppp active secrets? i have tried executing the cmd on the mikrotik cmd and it works /ppp active print count-only and it prints out the number of the total pppoe clientes connected.. i need to output it to php for...
by PortalNET
Sat Sep 25, 2021 4:18 pm
Forum: Scripting
Topic: Parsing problems with 'print terse' and 'print as-value'
Replies: 5
Views: 5885

Re: Parsing problems with 'print terse' and 'print as-value'

Hi i know its an old thread but i have found somewhere on google i think o DaniC website a ssh mikrotik implementation class, perhaps this could be usefull for some ssh php project.. for php7 needs some changes on the code.. as split and other functions have been deprecated. <?php error_reporting(E_...
by PortalNET
Wed Sep 22, 2021 4:31 pm
Forum: Scripting
Topic: Php SSH2 fetch OUTPUT from Mikrotik
Replies: 2
Views: 4347

Re: Php SSH2 fetch OUTPUT from Mikrotik

ok nearly 12 years later... but as we know.. the PHP api stopped working on the latest versions of Mikrotik 6.4xx so why not use ssh2_connect in order to send cmds and fetch the output result from mikrotik 1st you need to have a server machine the first cmd will depend on your linux distro version, ...
by PortalNET
Sat Jul 17, 2021 2:07 am
Forum: General
Topic: Routing a Block of Public IP Addresses
Replies: 38
Views: 11597

Re: Routing a Block of Public IP Addresses

I did find information on how to set a NAT rule to correct the problem of clients not showing the correct public ip address. That works fine now. I also found that I needed a couple of filters in the firewall rules to allow inbound and outbound traffic that's using the public ip addresses. I also f...
by PortalNET
Mon May 31, 2021 9:47 pm
Forum: General
Topic: Mikrotik ASN Public IP question
Replies: 4
Views: 1721

Re: Mikrotik ASN Public IP question

whilst on the public ips on ASN we have created the accept rule to pass all traffic without blocking ports on the public ips.. so i am guessing that these types of attacks must be hammering the clients routers with attempts to access the devices.. i have seen on the net that there could be a ton of...
by PortalNET
Mon May 31, 2021 3:02 am
Forum: General
Topic: Mikrotik ASN Public IP question
Replies: 4
Views: 1721

Re: Mikrotik ASN Public IP question

Yes, use FIREWALL on pppoe-server Drop any incoming unsolicited connection from outside directed to IP of clients. If some clients required open ports DO NOT OPEN 20,21,22,23,53,80,443 and open only what requested, and on firewall rule add the expected IP of remote source. Problem is we have ASN IP...
by PortalNET
Mon May 31, 2021 2:55 am
Forum: General
Topic: Botnet and bad actor filters
Replies: 21
Views: 5380

Re: Botnet and bad actor filters

by PortalNET
Mon May 31, 2021 2:46 am
Forum: General
Topic: Botnet and bad actor filters
Replies: 21
Views: 5380

Re: Botnet and bad actor filters

Who is the idio-t than pay Pricing Based on network size, starting from $2,500 per annum. https://www.spamhaus.com/product/border-gateway-protocol/ For one rule on "/firewall raw" (drop all prerouting when source is on combined drop-edrop-c&c list) https://www.spamhaus.org/drop/drop.t...
by PortalNET
Wed May 19, 2021 3:15 am
Forum: General
Topic: Botnet and bad actor filters
Replies: 21
Views: 5380

Re: Botnet and bad actor filters

Just thought I would share this with the Mikrotik community. I've always been a proponent of keeping garbage traffic off our network in an effort to conserve our very expensive infrastructure resources. Besides doing the usual things like blocking Bogon IP traffic and block certain TCP/UDP ports, w...
by PortalNET
Thu May 13, 2021 4:31 pm
Forum: General
Topic: Mikrotik ASN Public IP question
Replies: 4
Views: 1721

Mikrotik ASN Public IP question

Hi guys we have obtained recently ASN block IPv4 /22 on our ISP.. and we have setup BGP .. after a couple of weeks of testing this IPs blocks, updating the Region/country of the ASN ip block, aparently this block was accquired from another region country to our country so after setting up the ASN an...
by PortalNET
Fri Apr 23, 2021 10:24 pm
Forum: General
Topic: Client IP instead of Gateway IP [SOLVED]
Replies: 9
Views: 6751

Re: Client IP instead of Gateway IP [SOLVED]

Thank you very much Setting out-interface=<WAN interface> solved the problem in both cases. Thanks once again Unfortunately this did not work for us.. We have BGP with our IPV4 /22 configured.. then we forward our public ips in smaller blocks to other Mikrotik devices.. then from one specific devic...
by PortalNET
Fri Apr 23, 2021 10:06 pm
Forum: General
Topic: Client IP instead of Gateway IP [SOLVED]
Replies: 9
Views: 6751

Re: Client IP instead of Gateway IP [SOLVED]

Hi guys it looks like i have the same or a very similar issue here we have a ASN /22 block.. we have setup a client static public ip with /30 and client company has setup a mikrotik on their end.. so IP1 gateway on our side, and IP2 on client side.. internet working just fine.. but when external con...
by PortalNET
Fri Jan 22, 2021 4:28 am
Forum: General
Topic: Problem with IP/address and IP/route pref-source need some help
Replies: 2
Views: 1070

Problem with IP/address and IP/route pref-source need some help

Hi guys i have messed up a wireless radio at a 20 mile distance whilst playing with vlans on the device and a mikrotik interface on the PTP ... basically i have setup de ip address netmask and gateway on the radio.. but i have setup wrong basically the correct settings would be on the mikrotik inter...
by PortalNET
Sat Nov 21, 2020 2:04 pm
Forum: SwOS
Topic: CRS305 SFP+ connect speedtest
Replies: 2
Views: 3847

Re: CRS305 SFP+ connect speedtest

What exactly do you want to test? When testing by bandwidth test in ROS between two devices you are not really testing network performance, but rather CPU performance of the devices. To test bandwidth properly you should test through your devices, not between them. And you can do so for SwOS as wel...
by PortalNET
Thu Nov 19, 2020 11:15 pm
Forum: SwOS
Topic: CRS305 SFP+ connect speedtest
Replies: 2
Views: 3847

CRS305 SFP+ connect speedtest

Hi guys i have 2 CRS305 units which i am doing some tests, 1st test in RouterOS mode, as described plugged both CRS305 units via SFP+ 10G cable, it links on bothsides, created an IP/address to connect between each other and started the bandwidth tests.. as expected the results were the same as on th...
by PortalNET
Tue Nov 17, 2020 5:31 pm
Forum: General
Topic: internet Speed tests slow upload
Replies: 4
Views: 3299

Re: internet Speed tests slow upload

Hi guys i have accquired 3 units, so far i have done the testing in RouterOS mode, bandwidth test, from one device to another via 10g sfp+ connection.. so far TCP and UPD max bandwidth with MTU 1518 size is 1235mbps to 1240mbps thats pretty much what is advertised on the mikrotik test results.. now ...
by PortalNET
Wed Nov 04, 2020 9:22 pm
Forum: General
Topic: TX/RX Packet limit..... not TX/RX Rate limit.. help
Replies: 0
Views: 647

TX/RX Packet limit..... not TX/RX Rate limit.. help

Hi guys as the title describes,can anyone confirm if TX/RX packet limit exists? is it configurable? i do not plan to limit rate speeds on tx/rx rate limit... we have a odd issue with some pppoe users who like to hire their internet and become a small ISP sitting on a residential home internet , inst...
by PortalNET
Sat May 30, 2020 7:45 pm
Forum: General
Topic: 2 public ips block /29 on 2 separate interfaces cannot ping between
Replies: 3
Views: 1120

Re: 2 public ips block /29 on 2 separate interfaces cannot ping between

From Lan1 IP 10.1.10.26 i can only Ping to LAN2 Gateway 10.1.10.125 From Lan2 IP 10.1.10.126 i can only ping to LAN1 Gateway 10.1.10.25 You have not introduced "Lan1" and "Lan2" with the above IPs. Are they distinct from "LAN1" and "LAN2"? If yes, what are th...
by PortalNET
Sat May 30, 2020 4:41 am
Forum: General
Topic: 2 public ips block /29 on 2 separate interfaces cannot ping between
Replies: 3
Views: 1120

2 public ips block /29 on 2 separate interfaces cannot ping between

Hi guys i have a strange issue we have been recently assigned a Public IP /22 to our company , so BGP route is running all setup default BGP route, and we have peers working already. So we have created the filter rule to accept everything inside our /22 block on second mikrotik device we the followi...
by PortalNET
Sun Apr 19, 2020 7:10 am
Forum: SwOS
Topic: CRS317 SwOS boots with no connectivity
Replies: 2
Views: 7595

Re: CRS317 SwOS boots with no connectivity

Hi

once u boot into the switchOS

you will only be able to login via web interface on IP 192.168.88.1 or 192.168.88.2

so u have to setup a static ip on your pc NIC interface on the same range in order to be able to connect.

then u can upgrade it to switchOS 2.11 via the web interface
by PortalNET
Fri Apr 17, 2020 5:06 pm
Forum: SwOS
Topic: Management Loss [SOLVED]
Replies: 6
Views: 19195

Re: Management Loss [SOLVED]

Hiya i had a similar issue, when i switched to SwOS and rebooted.. i lost access via winbox, i could only use the web interface page.. and the IP on the swOS did not changed to the configured one, i was able to access it using the 88.1 default ip, then on the system page configured back the IP from ...
by PortalNET
Fri Apr 17, 2020 4:36 pm
Forum: SwOS
Topic: CRS317 Trunk configuration examples help
Replies: 1
Views: 3120

Re: CRS317 Trunk configuration examples help

Hi Guys

going further a litle bit on the configuration, this is a litle scenario diagram below..

i just need to trunk port BGP with specific VLAN, and PPPOE-SERVERS with another different vlan , but need the BGP to receive all vlans, not shure if this would be the correct configuration
by PortalNET
Fri Apr 17, 2020 4:39 am
Forum: SwOS
Topic: CRS317 Trunk configuration examples help
Replies: 1
Views: 3120

CRS317 Trunk configuration examples help

Hi guys i have recently purchased one of this devices into our company for daily usage, but i am kind of lost with missing information about configuration.. i have setup switchOS firmware and booted on switchOS, upgraded it to version 2.11 switchOS, which is now running in switchOS mode only so i ha...
by PortalNET
Tue Mar 17, 2020 11:27 pm
Forum: General
Topic: RB4011 SFP+ simple question
Replies: 1
Views: 1369

RB4011 SFP+ simple question

Hi guys quick question does anyone have this new RB4011 with SFP+ port running with PPPOE-server? i amd wondering what kind of maximum bandwidth speed you can reach with it lest say for a PPPOE-SERVER with around 400 to 500 users active maximum.. i am looking at the data specs and it states that for...
by PortalNET
Mon Mar 09, 2020 8:52 pm
Forum: General
Topic: PPP Daemon exploit open for the last 17 years
Replies: 1
Views: 2026

PPP Daemon exploit open for the last 17 years

Hiya i would like to know if this exploit could affect the Mikrotik routers, its a exploit on the PPP daemon that has been wide open for the last 17 years CVE-2020-8597 Critical PPP Daemon Flaw Opens Most Linux Systems to Remote Hackers The US-CERT today issued advisory warning users of a new danger...
by PortalNET
Thu Oct 17, 2019 11:55 pm
Forum: General
Topic: How to enable 2 Static public IP block´s /30 feed on 1 fiber SFP , split into 2 different mikrotiks.
Replies: 5
Views: 1820

Re: How to enable 2 Static public IP block´s /30 feed on 1 fiber SFP , split into 2 different mikrotiks.

Sounds like an MTU issue, the default PPPoE server setup has an MTU of 1480. Its strange but doesnt sound like an mtu issue.. i thinks its something in the mangle , or mark-routing that its not accepting it to filter it correctly on Static LAN ips from another interface, tbh i am kind of lost now.....
by PortalNET
Thu Oct 17, 2019 12:37 am
Forum: General
Topic: How to enable 2 Static public IP block´s /30 feed on 1 fiber SFP , split into 2 different mikrotiks.
Replies: 5
Views: 1820

Re: How to enable 2 Static public IP block´s /30 feed on 1 fiber SFP , split into 2 different mikrotiks.

Let's call CCR1009 (the ISP facing) R1. And let's call CCR1036 (the remote one) R2. The simplest case: if R1 and R2 are (more or less) completely independent from L3 (IP) point of view, then you could bridge two SFP interfaces on R1 (one currently used for WAN and one currently used to connect to R...
by PortalNET
Thu Oct 10, 2019 3:10 am
Forum: General
Topic: How to enable 2 Static public IP block´s /30 feed on 1 fiber SFP , split into 2 different mikrotiks.
Replies: 5
Views: 1820

Re: How to enable 2 Static public IP block´s /30 feed on 1 fiber SFP , split into 2 different mikrotiks.

Well

thats exactly what i need i will give it a try, and will post the outcome result.
by PortalNET
Wed Oct 09, 2019 5:57 pm
Forum: General
Topic: Multiple static public IPs through one interface
Replies: 26
Views: 33394

Re: Multiple static public IPs through one interface

Again, it depends how the ISP route it. When they route the second /30 via the 1st, you can just set it on a link between your two routers and it will work. But when they route the second block just directly on the line (address2 via address1) you will need to use tricks. Hi yes indeed they use the...
by PortalNET
Tue Oct 08, 2019 4:48 am
Forum: General
Topic: How to enable 2 Static public IP block´s /30 feed on 1 fiber SFP , split into 2 different mikrotiks.
Replies: 5
Views: 1820

How to enable 2 Static public IP block´s /30 feed on 1 fiber SFP , split into 2 different mikrotiks.

Hi guys i have a small issue, and i am having hard times finding a working solution for .. My ISP service provider offers me 2 static IPs , split into 2 different blocks, meant to be used simultaneously on the same Mikrotik device. example Block 1 = 189.xxx.xx2.90/30 Block 2 = 201.xxx.xx9.124/30 Bot...
by PortalNET
Tue Oct 08, 2019 4:36 am
Forum: General
Topic: Multiple static public IPs through one interface
Replies: 26
Views: 33394

Re: Multiple static public IPs through one interface

This was their response: Network IP *.*.135.188/30 Subnet Mask *.*.255.252 Host IP's *.*.135.189 & *.*.135.190 (Usable IP's) Broadcast *.*.135.191 Most likely a litle bit late for posting the outcome, but basicaly a /30 just means you have 2 IPs, one will be your gateway and the other will be y...
by PortalNET
Thu May 16, 2019 4:00 am
Forum: General
Topic: 2 WAN Transmit on 1 Specific interface using separate VLANs
Replies: 3
Views: 1028

Re: 2 WAN Transmit on 1 Specific interface using separate VLANs

Hi

Have a look at VRF/routing rules, with it you can setup independent routing for specific incoming interfaces.
Hi Sebastia thxs

i will do some research on it..


BTW forgot to ask before, can i use 2 different VLAN on one specific Interface on the Mikrotik without being bridge interface?
by PortalNET
Sat Apr 27, 2019 11:15 pm
Forum: General
Topic: 2 WAN Transmit on 1 Specific interface using separate VLANs
Replies: 3
Views: 1028

2 WAN Transmit on 1 Specific interface using separate VLANs

Hi guys I am having some issues forwarding 2 WAN Links via 1 specific interface using 2 Separate VLANs So i have 1 CCR where i have 2 Links input, each configure with separate Static IP and Gateway, on this specific CCR i have 2 PPPOE-Servers and i can forward traffic via IP profiles to each separat...
by PortalNET
Fri Mar 15, 2019 9:24 pm
Forum: General
Topic: IPTV who should pay?
Replies: 46
Views: 11016

Re: IPTV who should pay?

I just wanted to throw this in to the community for discussion. I operate a WISP in Spain who's client base consist of a large proportion of expats who use illegal UK IPTV services. We find ourselves having to pay for very expensive bandwidth,  that is not normally required, to keep these services ...
by PortalNET
Thu Feb 14, 2019 11:56 pm
Forum: Virtualization
Topic: What machine for 40Gbps Edge Router?
Replies: 21
Views: 14165

Re: What machine for 40Gbps Edge Router?

Hi guys, We sell IP transit to some smaller ISPs and also offer High Speed to residential clients and our current Router solution is reaching the limit, I would like to deploy a new Mikrotik Router for 40Gbps of traffic. I don't consider the CCR1072 because it only has 10Gbps ports and I'm consider...
by PortalNET
Wed Oct 24, 2018 11:29 pm
Forum: General
Topic: Extract PPP user list from RB backup
Replies: 1
Views: 1162

Extract PPP user list from RB backup

Hi guys

i have a script that runs daily backups from the mikrotik RB

one of them died so i need to export the ppp user list and pppoe server configuration from the daily backup, to copy on a new RB ccr diferent model from the one that died, is this possible, if yes with what tools?
by PortalNET
Thu Mar 15, 2018 3:28 am
Forum: General
Topic: Mikrotik Static DNS and public domain redirects
Replies: 1
Views: 1438

Mikrotik Static DNS and public domain redirects

Hi Guys I have some doubts and i have searched on the forum for some specific information regarding my issue i have found some old posts with some vague information, or perhaps i dit not understand it fully. I will ask again is someone can point me on the right direction approach to what i am trying...
by PortalNET
Fri Nov 03, 2017 2:46 am
Forum: General
Topic: RouterOS 6.39 bandwidth test on x86 AMD doubts
Replies: 4
Views: 2065

Re: RouterOS 6.39 bandwidth test on x86 AMD doubts

I can't see the photos but you have to run multiple up or tcp streams to use all codes. What way are you testing? Also the numbers you get are crazy good for this Cpu. Do you really mean Gbps? The Cpu only has 4 threads as Amd do not have hyperthreading until Ryzen, called SMT I think. Also this Cp...
by PortalNET
Fri Nov 03, 2017 2:40 am
Forum: General
Topic: X86_64 ROS - 64bit Mikrotik [SOLVED]
Replies: 92
Views: 73655

Re: X86_64 ROS - 64bit Mikrotik [SOLVED]

Hi boys i have some doubts regarding the x86-64 architecture... but first things first, is it just me or there seems to have a bug on all versions of mikrotik x86 that cannot read RAM memory available correctly? or is it just some versions or Memory RAM modules that does not display it correctly? i ...
by PortalNET
Wed Nov 01, 2017 11:40 pm
Forum: General
Topic: RouterOS 6.39 bandwidth test on x86 AMD doubts
Replies: 4
Views: 2065

RouterOS 6.39 bandwidth test on x86 AMD doubts

Hi guys Ok so i have decided to give it a try and test RouterOS 6.39.xx bugfix on a Spare machine i have here used in the past for bitcoin mining.. i wanted to check the troughput i could get out squeezing all the cpu cores.. PC specs: Amd Fx-4300 3.8ghz Am3 8mb Cache (4 Cores 8Threads) as we know M...