Does anyone know how to do that or not?

*subject*

Specifically one for 0x888E type frames.

Is it possible to do so? If so, how? I read on Dslreports.com that it involves forwarding the 802.1x packets that the NVG599 uses and was wondering if it is possible to do so on the router that I mentioned in the title.

I am getting a syntax error in the script that is used in the 2nd part when running it on the latest RouterOS RC.

Could someone make scripts that play Fate of the Fairies, Ancient Makes, Silver Will, Challenger Invited, and The Merciless Savior (they are all themes from the Legend of Heroes: Trails in the Sky First Chapter and Legend of Heroes: Trails in the Sky Second Chapter). Thanks in advance. If you offer...

Could someone make scripts that play Fate of the Fairies, Ancient Makes, Silver Will, Challenger Invited, and The Merciless Savior (they are all themes from the Legend of Heroes: Trails in the Sky First Chapter and Legend of Heroes: Trails in the Sky Second Chapter). Thanks in advance.

It fixed both issues.

Hallo, you have to increase your dhcp Server Time out Session, i think it's by default 10 Second . Best regard Gesendet von iPhone mit Tapatalk Thanks for letting me know. And, its not 10 seconds, its 10 minutes (It goes in the order of hours:minutes:seconds). I changed it to a day and will see if ...

I have been encountering some issues connecting my Android Tablet (an Acer Iconia One 8 running Android 5.1) to a network with the security set at WPA2-AES (no TKIP). For some reason, it will complain of WiFi connection/authentication issues and not connect to the network every now and then (which a...

My updated auto-upgrade script is here: https://github.com/massimo-filippi/mikrotik
Fully working on 6.33.3

It would be nice if it also checked for an updated version that is a part of the release_candidate channel and upgraded to that one if so.

Is it possible to do that? If not, then that function should be added so the status message of FreeDNS, etc. could be added to the Log for easy viewing.

How do I go about doing that? Its homepage is located at https://www.p2pblocklist.net/.

I figured it out. I had to set the UVerse modem to pass-through its IP to the router and add a NAT rule below the default masquerade rule with the following config:

Chain: dstnat
Input Inferface: ether1-gateway
Action: dst-nat
To Addresses: 10.0.1.4

I tried forwarding all ports to the mentioned IP Address but that didn't work.

How do I do that? I have a Uverse modem, Powerline Adapter, SamKnows WhiteBox and a Raspberry Pi connected to it. The IP address I want to be DMZ'd is 10.0.1.4 and the IP address of the RB951G-2HnD is 192.168.1.3 on the WAN side and 10.0.1.1 on the LAN side. EDIT: Here is its config: # apr/24/2017 2...

It would be nice if there was an option to display a box containing the Ethernet and DHCP Clients (with the Mac, IP, and how long it has been online) connected to it in the Quick Set page.

It complains about not having an internet connection after setting a proper DNS address. Please tell me how to fix it.