I bought a Mikrotik router to have an all-round router that is very configurable and extensible. Unfortunately, I quickly reached its limits. I tried to secure my internet traffic via the microtic router with a VPN provider. I have set up trial accounts with several VPN providers such as NordVPN, E...

These have a guide for Mikrotik, dont know if it works or not though or if they are any good. https://www.safervpn.com

As far as I have seen L2TP is used without IPSec and OpenVPN without authentication.
I don't know if this is so secure.
Does anyone know better?

I bought a Mikrotik router to have an all-round router that is very configurable and extensible. Unfortunately, I quickly reached its limits. I tried to secure my internet traffic via the microtic router with a VPN provider. I have set up trial accounts with several VPN providers such as NordVPN, Ex...

workaround:

on the VPN-Client
powershell
Add-VpnConnectionRoute -ConnectionName "VPNConnection" -DestinationPrefix 192.168.83.0/24 -PassThru

then will there is a active route if the vpn-connection is active, also after a reboot of the machine

log router: Message TSi in tunnel mode replaced with config address: 10.0.83.255 Message TSr in tunnel mode replaced with split subnet: 192.168.83.0/24 Message canditate selectors: 192.168.83.0/24 <=> 10.0.83.255 on VPN-Client-Side: PS C:\WINDOWS\system32> get-vpnconnection Name : TestVPN ServerAddr...

try

/ip ipsec mode-config
add address-pool="VPN guests" name="vpn Guests" split-include="192.168.168.0/23"

i have insert 192.168.83.0/24 in mode-config for vpn and reconnect the vpn-client but the gateway will not push to them. Syntax Problem? [admin@router] /ip ipsec mode-config> print Flags: * - default 0 * name="request-only" 1 name="cfg1" system-dns=yes static-dns="" add...

Now i have given my VPN-Client IP-address from another subnet. After connecting i must configure a route on the VPN-Client to the VPN-Network manually to successfuly ping the Router and client. Step by step. How can i push the route to the VPN-client from Router?

Thank you for the list of problems: 1. proxy-arp is activated on bridge and ethernet2-master 2. firewall #11 and #15 is now disabled 3. NAT? you mean masquerade srcnat SRC192.168.83.104/29 DST192.168.83.16/28 ? 4. i can ping the client behind router from the router is it much better to giving VPN Cl...

Sorry for double-post but in the beginners basic there is no reaction: I create a VPN-Tunnel with IPSec and IKEv2 between Windows 10 (1703) and Mikrotik rb 3011 UiAS-RM (v6.39rc79). The configuration is made like https://wiki.mikrotik.com/wiki/Manual:I ... rver_Setup. Certificates are created and im...

I create a VPN-Tunnel with IPSec and IKEv2 between Windows 10 (1703) and Mikrotik rb 3011 UiAS-RM (v6.39rc79). The configuration is made like https://wiki.mikrotik.com/wiki/Manual:IP/IPsec#Ikev2_Server_Setup. Certificates are created and imported on the windows client. The client is connected and ge...