Community discussions

Search found 4 matches

by nocmonkee
Mon Jan 08, 2018 9:42 pm
Forum: Beginner Basics
Topic: HOWTO: UVERSE and Tunneled ATT IPV6 aka 6RD/6to4 or NATIVE using a PACE RG
Replies: 1
Views: 852

Re: HOWTO: UVERSE and Tunneled ATT IPV6 aka 6RD/6to4

I had to upgrade to a Pace 5268AC and I was able to get native ipv6 working with it. Mikrotik needs to be configured for dhcp on the wan and the Pace needs to be setup for dmz+. in the Lan tab under "Lan IP Allocation" select the mikrotik and select disable firewall and save. By default my Pace had ...
by nocmonkee
Thu Nov 02, 2017 9:57 pm
Forum: RouterBOARD hardware
Topic: CCR1072 watchdog reboot
Replies: 108
Views: 15627

Re: CCR1072 watchdog reboot

We currently are not running any dynamic routing protocols. The purpose of our CCRs is NAT. They also manage dhcpd and upnpd with lacp, multiple rfc1918 vlans 20G in and one vlan 20G out.
by nocmonkee
Thu Nov 02, 2017 9:17 pm
Forum: RouterBOARD hardware
Topic: CCR1072 watchdog reboot
Replies: 108
Views: 15627

Re: CCR1072 watchdog reboot

We started experiencing these watchdog reboots on our CCR1072s running 6.40.1. Is this a reported bug? Does downgrading to 6.40.0 really stabilize it? Is it fixed in newer versions? nov/02/2017 05:13:15 system,error,critical router was rebooted without proper shut down, probably kernel failure nov/0...
by nocmonkee
Thu May 04, 2017 8:18 am
Forum: Beginner Basics
Topic: HOWTO: UVERSE and Tunneled ATT IPV6 aka 6RD/6to4 or NATIVE using a PACE RG
Replies: 1
Views: 852

HOWTO: UVERSE and Tunneled ATT IPV6 aka 6RD/6to4 or NATIVE using a PACE RG

In order for this to work there are 2 requirements of the ATT 2wire/arris RG. The Model of mine is NVG589 on Uverse Gigapower aka gpon. First login to the Uverse 2wire/arris RG and have "ip pass through" with "DHCPS-fixed" enabled to put your ATT assigned public ipv4 address on your mikrotik by MAC....