MikroTik

Alestrix

You may be allowed to replace their box but you have to accept a VOIP liability, so I would not. What do you mean with "VoIP liability"? I received the SIP credentials from my ISP, so I was able to use my own hardware for everything - DSL modem (DGA4132), router (Ubiquiti ER-X), SIP-Clien...

Alestrix

But I would not replace my cable modem/router for SFP if I have to add an ATA box even if I could. Don't most people that prefer a "real" router (Cisco, MikroTik, Ubiquiti, Juniper, ...) use a separate modem? The moment you switch the ISP's CPE into modem/bridge mode, the telephony capabi...

Alestrix

We only need support from MikroTik so that parameters of the line can be viewed and possibly tweaked when such a module is plugged into a MikroTik router. Similar to what is now possible for fiber modules but with values as usual for DSL. Reading this got my hopes high and I plugged in a GPON ONU t...

Alestrix

Hi! I know this thread is already a bit dated, but the issue I'm having seems to be related to using LACP and RSTP at the same time. I have a non-MikroTik switch where I can disable RSTP on each port forming the LAG, but enable it for the LAG itself. I don't know what that switch is doing with RSTP ...

Alestrix

what I've seen so far edge router series is meh TBH, I absolutely love to work on the EdgeRouter's CLI, rarely look at the GUI at all. It's a Linux that you can script to your liking. It also has a feature (not out of the box but easily added) to forward broadcasts on certain ports into different s...

Alestrix

Isn't that what happens when someone makes a mistake and connects a cable between two access ports configured in different vlans on two different switches? Wouldn't this be the solution? Take two unused ports, configure their untagged vids to the two vids in question, and then bridge them with an e...

Alestrix

I have the very same problem with my CSS326 for a a very long time now and it happened with basically every firmware since v2.3, currently running v2.8: After some time - sometimes weeks, sometimes a few days, recently it was less than a day (see below) - it just locks up and would not let any traff...

Alestrix

I have updated the SwOS of my CSS326-24G-2S+RM switch to SwOS 2.6 and the stats tab gives incorrect values. It seams that the TX bytes and RX bytes are frequently reset to zero. Is this a bug or a feature? Regarding the original question: That's probably the 32bit rollover (approx. 4GB). SwOS 2.8 u...

Alestrix

"strict - Same as enable, but also checks VLAN support for inbound interface (drop packets with VLAN tag ID and ingress port that are not present in VLAN table)" From https://wiki.mikrotik.com/wiki/SwOS/CSS106 VLAN mode.PNG I always thought this is what "enabled" does. Does this...

Alestrix

Hello.. The MTU is not able con be configured in SwOS, however, there is a table which helps to know if a CRS or CSS support jumbo frames. Actually, you can find it here: https://wiki.mikrotik.com/wiki/Manual:CRS_features and here https://wiki.mikrotik.com/wiki/Manual:CRS3xx_series_switches But to ...

Alestrix

You said that IP address changed since after SwOS is upgraded. Not true - in this case the switch will not recover its IP to 192.168.1.200 after reset (power off, power on). That's not what he said. With v2.5+ IP is retrieved via DHCP and only if that fails, switch uses the preconfigured address. S...

Alestrix

Hello, I doubt we're discussing the exact same thing: - Bonjour is working fine with help of avahi reflector as mentioned - Proprietary bjnp protocol (especially discovery frames) is the problem. Frames aren't reaching other vlan(s). I would just need to echo packet in another subnet/vlan. So I gue...

Alestrix

Hallo Mikrotik Fans, sorry but i want to tell you the trougth. For the German Market and German ISP connections only ALLNET will be have the right Hardware who will working. .... Alternatives for Bridge-Modem for German Connections ADSL based on Lantiq = ALL0333CJ = https://shop.allnet.de/search?sS...

Alestrix

But it does not work with Dt. Telekom (T-COM) VDSL connections. That should change during 2018.

Why so? If that's when you get migrated to BNG, it should still work now on the old BRAS.

Sent from Honor 8 using Tapatalk

Alestrix

I read somewhere that e.g. the CSR326 does support jumbo frames (I don't see a reason why that should be a setting that can be enabled and disabled - a switch has a certain maximum packet size that it supports, no more, no less) but I couldn't get it to work in my setup between a Win 10 desktop and ...

Alestrix

The FS.com ones are truely cheap. Though in my case, if you add VAT and shipping to Germany they cost more than the ones from Ubiquiti.

Alestrix

Hello Community! The CSS326 is the lowest priced SFP+ capable switch I know of and the UF-MM-10G the lowest priced 10G transceiver I could find, thus for a home setup like mine this seems to be a dream team. I searched for compatibility info about that combination before I bought the modules but did...

Alestrix

Thanks;

I'will try and write you back.

Did it work for you?

Sent from Honor 8 using Tapatalk

Alestrix

@Donovanh Can you confirm this issue has been fixed? I am planning to buy the same switch and connect it with LACP to a Synology NAS which has 4 ports. As stated above, LACP works fine on my CSS326 with a NAS4Free box. Hardware is a HP ProLiant Microserver with a second NIC. Sent from Honor 8 using...

Alestrix

Hi,

Not sure whether this helps, but I have a DAC between my SFP+-equiped-NAS and CSS326 and the switch auto-negotiates the port to 10G according to the 'Link' tab. I didn't have the time yet to actually test the bandwidth, though.

Cheers,
Alex

Alestrix

What for? IIRC that's a thing for a router to tickle with.

Sent from Honor 8 using Tapatalk

Alestrix

@becs: I had mine set up without NAT at first and couldn't reach the switch from another subnet. It started working once I had NAT in place.

Sent from Honor 8 using Tapatalk

Alestrix

The IP and VLAN can be set in the "System" tab. However, SwOS doesn't know anything about netmasks and gateways. Communication only works on the same subnet. The solution I use is to configure source NAT (masquerade) for communication towards the switch on the last router (in my case there...

Alestrix

I can't say anything about your LACP troubles (that behavior is truly odd), but regarding your last paragraph: The switch doesn't find the internet. The info about changelog and latest version that can be seen in the System tab is just an iframe. All the magic happens in the browser. Not having a ga...

Alestrix

Hi,
is there an ETA for the routing stats of CRS326?

Sent from Honor 8 using Tapatalk

Alestrix

The performance of the CPU for routing tasks will be published shortly on this page:

https://routerboard.com/CRS326-24G-2SplusRM

Thanks! I'll be looking forward to the results!

Sent from Honor 8 using Tapatalk

Alestrix

How fast can the CRS326 route with/without NAT, with/without "usual" QoS settings? And what does it mean that routing can be done on some ports? Do I have to physically connect one of those "router ports" to one of the "switch ports" to make any use of the fact that thi...

Alestrix

Yes you can!

Make the port member of both VLANs (VLANs tab) and make the untagged VLAN the default VLAN (VLAN tab), "VLAN receive" set to "any", mode set to "enabled" (not sure what "optional" does).

Sent from Honor 8 using Tapatalk

Alestrix

I can now confirm this is fixed in v2.3. I added management VLAN configuration and can still access the management interface.
I have not yet tested whether the setting is correctly enforced, i.e. whether access is denied from other VLANs.

Sent from Honor 8 using Tapatalk

Alestrix

Apparently it's fixed now with v2.3. I don't want to test this as I only have a production unit (no test device) and I don't want to risk losing access to my main switch.
Can anyone confirm this is fixed with v2.3?

Gesendet von meinem FRD-L09 mit Tapatalk

Alestrix

I can't talk for donovanh, but I had similar unstable behavior on my LAG link which is fixed now with v2.3!

Gesendet von meinem FRD-L09 mit Tapatalk

Alestrix

Hi, The "Upgrade" tab on my CSS326 (SwOS 2.2) sais "Latest Available Version: 2.3rc2 (built at Wed May 24 2017 13:36:36 GMT+0200 (Mitteleuropäische Sommerzeit))". There is neither a link to a changelog nor to a firmware image download. Where can I find information about 2.3rc2? C...

Alestrix

Hi, on CSS326 runing SwOS2.2, when I set Management VLAN to 1 and connect computer to a port which - has VLAN set to "optional" (i.e. not "disabled") - may accept any (tagged and untagged) - has default VLAN ID 1 - is member of VLAN 1 (among others) Then I cannot access the manag...

Alestrix

LACP is supported with SwOS 2.1 (apparently buggy) and SwOS 2.2.
I'd love to hear about reports how well it works.

Gesendet von meinem FRD-L09 mit Tapatalk

Alestrix

Which access points are you using? Mine are from Open-Mesh. Very happy with them. I stand corrected, not the same brand :). I'm using a Ubiquiti AP-AC-LR. It behaves in the same way as you describe above. Regarding my question above, I found an answer in another thread (https://forum.mikrotik.com/v...

Alestrix

Does the CSS326 support this? I have the exact same setup as k6ccc (probably the same access point brand

) and planning on getting a CSS326.

Alestrix

Can the CSS326 max out a Link Aggregation Group or is link aggregation only implemented in the CPU?

One other thing: From the wiki it seems that the switch doesn't support balance-rr as an aggregation algorithm, but maybe it will in the future?

Search found 37 matches

Re: Mikrotik VDSL / DSL Modem?

Re: Mikrotik VDSL / DSL Modem?

Re: Mikrotik VDSL / DSL Modem?

Re: LAG (LACP) or RSTP or both???

Re: Why people pair UBNT APs with MikroTik routers?

Re: 2 untagged VLAN same interface

Re: CSS326-24G-2S+RM hangs until power cycle - interworking issue with UniFi APs?

Re: CSS326-24G-2S+RM incorrect stats

Re: SwOS version 2.8 released!

Re: SwOS MTU

Re: RB260GS does not like version 2.7

Re: Routing broadcast between VLANs

Re: Mikrotik VDSL / DSL Modem?

Re: Mikrotik VDSL / DSL Modem?

Re: SwOS MTU

Re: Info: CSS326 and Ubiquiti UF-MM-10G SFP+ module working

Info: CSS326 and Ubiquiti UF-MM-10G SFP+ module working

Re: RE: Re: CSS326-24G-2S+RM

Re: RE: Re: CSS326-24G-2S+RM LACP Offline and online

Re: 2 x CSS326-24G-2S+RM

Re: SwOS MTU

Re: CSS326-24G-2S+RM LACP Offline and online

Re: CSS326-24G-2S+ management

Re: CSS326-24G-2S+RM LACP Offline and online

Re: Newsletter 76

Re: RE: Re: Newsletter 76

Re: Newsletter 76

Re: CSS326-24G-2S+RM

Re: RB260GS v2.2 Management VLAN STILL BROKEN

Re: RB260GS v2.2 Management VLAN STILL BROKEN

Re: CSS326-24G-2S+RM LACP Offline and online

SwOS version 2.3rc2?

Re: SwOS version 2.2 released -> BUG related to Management VLAN

Re: CSS326-24G-2S+RM + 802.3ad

Re: RE: Re: SwOS: Is a trunk port with native (untagged) vlan possible?

Re: SwOS: Is a trunk port with native (untagged) vlan possible?

Re: SwOS version 2.2 released