HI guys

Also having problems with the new Firmware, after uploading the new firmware to our router board CRS326-24G-2S+, the unit is rebooting +- every 4Hours in the process the unit freezes that we cant get into it with Winbox, we have to go to the site and reboot it manual to get it to work.

Hi Guys also having the same problem, Email was sent to support on 2018-06-23 12:36 and still have not heard a word back. Regards Hi Guys i an having a problem with my RB1100AHx2, saying i don't enough spare to load the new firmware. ERROR: not enough disk space, 16.2MiB is required and only 8.2Mib ...

Hi Guys

also downloaded and installed the 6.39.1
upgrades from 6.38.5
The problems that we have found.

1: lost all our port forwarding.
2: Radius clients on PPPoE take a hell of a long time to reconnect.

will give a update if we find something else.

OK guys i need some help on this, OK here it goes, i have a house with 2 clients on the premises the one client wants 1meg PPPoE the other wants a 4 Meg PPPoE and they want to use VOIP also PPPoE.. On the 750 I have.. 1: Ethernet 1 links up to a Air Grid M5 in Bridge mode 2: Ethernet 2 setup for cli...

Good Day

Has anyone have a script that can find all torrent trackers?

Regards

Sa Wireless

Hi all

just uploaded RouterOS 5.6 on my router and already found a problem.

Layer 7

firewall warning layer7 match failed, regexp too complex

had to downgrade to RouterOS 5.5 to get it to work

We did an upgrade from 2.9.50 to 3.0 but did we have a lot of problem with this upgrade. We found that when we upgraded, the system would only allow some clients on, and the CPU usage went through the roof. We have just done another upgrade with a base station and fond that it is also full of proble...

so can we run 2 X NMP-8602 PLUS 2.4 ghz and 1 X cm9 5.8ghz ???

We have just installed a new base station on a tower that is 45meter up; we did find a power issue with POE 45 volts, we then run a 220 power cable up the tower with the transformer inside the box, but we are still having the same problem that the unit switches 0ff/on .We went back to Miro and sat t...

so you are saying that I can run 2 X NMP-8602 PLUS and 1 x CM9 ?

We have just installed a new base station on a tower that is 45meter up; we did find a power issue with POE 45 volts, we then run a 220 power cable up the tower with the transformer inside the box, but we are still having the same problem that the unit switches 0ff/on .We went back to Miro and sat t...