Community discussions

MikroTik App

Search found 23 matches

by ollit
Fri Jul 17, 2020 3:52 pm
Forum: General
Topic: PPPoe over LTE
Replies: 3
Views: 835

Re: PPPoe over LTE

Hello Sindy, I use this device: https://mikrotik.com/product/wap_ac_lte6_kit I see the LTE Modem unter /interface lte, but i cannot select it unter /interface pppoe-client. the Option /port firmware set ignore-directip-modem=yes have I also test, but with a ppp connection also don't work. I think th...
by ollit
Fri Jul 17, 2020 1:44 am
Forum: General
Topic: PPPoe over LTE
Replies: 3
Views: 835

PPPoe over LTE

Hello, I have a wAP R ac (arm). I have installed a SIM Card and can go to the internet. Now I use a special Service APN and will start a PPPoE session, but I cannot select the LTE Interface. What can I do to select the LTE Interface? It's a Fallback solution, if DSL is down, i can get the same stati...
by ollit
Mon Mar 09, 2020 12:40 pm
Forum: General
Topic: Interface only Tx no Rx
Replies: 0
Views: 1749

Interface only Tx no Rx

Hello, how can I reset an interface automaticly if the interface only transmit packets? If there an other possibility for netwatch and ping? Often I have on some Interfaces ( VLAN, PPP ) that they no received packets, and after reset ( down/up ) they work fine for a long time ( 1 Week or 1 Month or ...
by ollit
Mon Nov 04, 2019 9:58 pm
Forum: RouterOS v7 BETA
Topic: CRS3xx SFP cannot disable
Replies: 0
Views: 1846

CRS3xx SFP cannot disable

Hello,

I use CRS326-24S+2Q+RM and CRS317-1G-16S+RM with the Software 6.45.7 and with S-RJ01.

If I disable the interface, the device on the other end, don't know about them. There is the link up. On Mikrotik is the link down.

Is this a knowing Issue?

KR
Oliver
by ollit
Thu Aug 22, 2019 9:40 pm
Forum: Forwarding Protocols
Topic: IPTV with CRS328-24P-4S+RM 700 Mbit
Replies: 1
Views: 1936

IPTV with CRS328-24P-4S+RM 700 Mbit

Hello,

the Switch has a CPU load from 95% if I connect the cable from the "Satellite Headend" there comes a traffic from round about 700 Mbit.
I don't get a picture on TV screens. I think It is the wrong Switch for this application?

KR
Oliver
by ollit
Mon Jul 15, 2019 1:07 pm
Forum: Announcements
Topic: Winbox vulnerability: please upgrade
Replies: 329
Views: 115509

Re: Winbox vulnerability: please upgrade

It is possible to show the column Version in the Tabsheet Managed?
by ollit
Thu Jun 27, 2019 12:24 pm
Forum: Forwarding Protocols
Topic: CRS3xx isolate management port ( without VLAN )
Replies: 0
Views: 1941

CRS3xx isolate management port ( without VLAN )

Hello, I use the switch with Router OS. I have put all interfaces to a bridge, only without the management port. It is possible this port to isolate? ( forwarding override acivate, but no forward to configure ) I don't want use VLAN for the management port. So, it is a valid configuration? Or it is ...
by ollit
Tue Aug 14, 2018 11:56 pm
Forum: General
Topic: Subnet over PPPoE take the wrong IP outgoing
Replies: 3
Views: 687

Re: Subnet over PPPoE take the wrong IP outgoing

It is over L2TP. The MT1 is the router, that brake out to the Internet, not the MT2.
by ollit
Tue Aug 14, 2018 10:08 pm
Forum: General
Topic: Subnet over PPPoE take the wrong IP outgoing
Replies: 3
Views: 687

Subnet over PPPoE take the wrong IP outgoing

Hello, I have a problem sending an IP from the subnet outgoing. 1. MT1 is the main Router in the RZ, there is a Subnet routet to an IP, which is on it. That works fine. ( subnet 10.2.3.0/29 ). 2. MT2 is the client Router, connect over the Internet PPPoE to the MT1 and get 1 IP Address ( ip 10.1.1.1/...
by ollit
Sun Jun 03, 2018 10:01 am
Forum: General
Topic: PPP establisht but no Rx traffic
Replies: 2
Views: 728

Re: PPP establisht but no Rx traffic

No idea everyone?
by ollit
Wed May 23, 2018 2:29 pm
Forum: General
Topic: PPP establisht but no Rx traffic
Replies: 2
Views: 728

PPP establisht but no Rx traffic

Hello, I have this problem on some Hardware CCR1009, RB3011UiAS, etc. The PPPOE Session is establisht and work fine for some hours or days. And than the Rx traffic stop working, you don't see any traffic on this. Router OS doesn't notice that, so it has done manuel deactive and active the PPP Interf...
by ollit
Mon Nov 06, 2017 3:15 pm
Forum: Announcements
Topic: SwOS version 2.6 released!
Replies: 30
Views: 14841

Re: SwOS version 2.6 released!

I have a Problem with SFP Kupper Modul from MikroTik. When I plug the modul, the right Serial Number, Part Number and Revsion would be shown. After reboot: Wrong Part Number "S)", no Revision and Serial 00100300. That is not all. If I enable this port, the Switch reboot, and reboot, and reboot. If t...
by ollit
Mon Aug 07, 2017 4:27 pm
Forum: General
Topic: NAT - where is the Problem?
Replies: 6
Views: 954

Re: NAT - where is the Problem?

Hello, A. Yes, I'm sure, there are no NAT rule which other IPs. Only the /24 ( current /32 ). Additional Information. The Subnet 10.251.0.0/24 is for some L2TP Connetion. At the Moment only for 10.251.0.10 ( only on L2TP ) B. Only one L2TP Tunnel has the IP 10.251.0.10, so no other Device can starte...
by ollit
Mon Aug 07, 2017 12:04 am
Forum: General
Topic: NAT - where is the Problem?
Replies: 6
Views: 954

Re: NAT - where is the Problem?

Is it possible a bug? I use 6.40.

After I Change from /24 to /32 all logs shows the right Internal IP.
But if I use a second internal IP, what should I do than?
by ollit
Sun Aug 06, 2017 11:59 pm
Forum: General
Topic: NAT - where is the Problem?
Replies: 6
Views: 954

Re: NAT - where is the Problem?

Export file is not possible, there is probability that I Change not all ( Passwords, Preshared Keys, External IP Addresses )

Can I give on other way more informations?

The external IP Addresses are on a VRRP Interface.
by ollit
Sun Aug 06, 2017 11:46 pm
Forum: General
Topic: NAT - where is the Problem?
Replies: 6
Views: 954

Re: NAT - where is the Problem?

Sorry, for my bad english.
by ollit
Sun Aug 06, 2017 11:42 pm
Forum: General
Topic: NAT - where is the Problem?
Replies: 6
Views: 954

NAT - where is the Problem?

Hello, Internal Address: 10.251.0.0/24 External Address: x.x.x.x Online IP: 10.251.0.10 I have NAT a /24 Subnet to one external IP. That works fine for the Online IP. In the Subnet only work/is online 1 IP. I don't understand the Log. 22:35:49 firewall,info forward: in:vrrp8 out:sfp-sfpplus8, src-ma...
by ollit
Sun Aug 06, 2017 12:18 pm
Forum: Scripting
Topic: Adding dynamic interfaces to interface list.
Replies: 8
Views: 6410

Re: Adding dynamic interfaces to interface list.

Hello,

I have the same Problem. Is there any solution for or don't work like this?

KR
Oliver
by ollit
Fri Jun 16, 2017 1:30 am
Forum: General
Topic: VRRP on VLAN
Replies: 11
Views: 3341

Re: VRRP on VLAN

It works on different Hardware without Problems ( I don't use all funktions from MT :-) ). But when it is wrong, I will change it. I have another question. I have a public IP range /26. Some IPs I will use on the MT and some on other Systems. If I work with VRRP, how to do that? Should I add all pub...
by ollit
Wed Jun 14, 2017 2:33 am
Forum: General
Topic: VRRP on VLAN
Replies: 11
Views: 3341

Re: VRRP on VLAN

If you don't use /32s on any secondary IP address (not only VRRP) you will receive broadcast traffic (among other things) twice. This could affect some services and routing protocols. That's also why /32s are always used on Loopbacks, in order to not create a broadcast domain. Whilst MT may create ...
by ollit
Sat Jun 10, 2017 6:05 pm
Forum: General
Topic: VRRP on VLAN
Replies: 11
Views: 3341

VRRP on VLAN

Hello, VLAN works fine on VRRP Interfaces. In wiki stands, I should VRRP Intarface only give /32 not /24. Why should I do this? What is the reason for that? Work for me. - ether1 ( 10.0.0.0/30 ) - VRRP1 ( 10.0.0.4/30 ) - VLAN1 ( 10.0.1.0/24 ) - VLAN2 ( 10.0.2.0/24 ) - VLAN3 ( 10.0.3.0/24 ) What I un...
by ollit
Wed May 24, 2017 9:33 am
Forum: General
Topic: IPSec stop working after time X on CCR1072
Replies: 5
Views: 883

Re: IPSec stop working after time X on CCR1072

Hello,

there is High CPU (45%) usage, when the IPSec don't send traffic.

Networking 41 %
unclassified 5 %
total 46,9 %

KR
Oliver
by ollit
Tue May 23, 2017 3:19 pm
Forum: General
Topic: IPSec stop working after time X on CCR1072
Replies: 5
Views: 883

IPSec stop working after time X on CCR1072

Hello, I have a Problem on 2 CCR1072 with VRRP. IPSec stop working after time X ( 1 day, 2 day, a half day, etc. ) No traffic was send. I have delect all Connections and flush SAs but it don't help. Only a restart work. On the other end is also a Microtik RB3011UiAS-RM I have change the Level in IPS...