2020 and still he we are with the same problem.

ROS 6.45.9
Any solution?

I had this problem on 6.43.14(long-term) and will post here because maybe it will help on 6.44.2(stable) too. Alright! For those who have lost IPv6 in concentrators with PPPOE server: -Remove remove everything from /ipv6/pool. -Reboot. -Add the pools again. -The log will be full of erros because the...

Alright! For those who have lost IPv6 in concentrators with PPPOE server: -Remove remove everything from /ipv6/pool. -Reboot. -Add the pools again. -The log will be full of erros because the profile is looking for the pools you removed. As soon as you add the pools again ipv6 will work again. -Remov...

No IPV6 on PPPOE clients after upgrade to 6.43.14 and 6.44.2. Sad... My problem is on the server side. Does DHCP work at all ? Can you do a configuration export or does it hang ? IPv6 on PPPoE would be affected by the DHCP problem above, as it relies on DHCPv6 pushing the IPv6 details over PPPoE. /...

No IPV6 on PPPOE clients after upgrade to 6.43.14 and 6.44.2.
Sad...

I'm running 6.44.2 on a RBD52G, my internet connection is over PPPoE ... and IPv6 works just fine.

My problem is on the server side.

No IPV6 on PPPOE clients after upgrade to 6.43.14 and 6.44.2.
Sad...

No IPV6 on PPPOE clients after upgrade to 6.43.14 and 6.44.2.
Sad...

Found this post after searching for same symptoms - Did anyone find a resolution?
Thank you

Nothing yet!

After update to 6.43.4 the ubiquiti client doesn't get prefix anymore and router throws above error continuously.

same here

Hi all. I just want to share a simple script. Our billing system does not block ipv6 yet, so i google around, colect some ideas and adapt to my scenario: /ip firewall address-list { :foreach i in=[find list=Bloqueados] do={ :local ip [get $i address] /ppp active { :foreach j in=[find address=$ip] do...

Same problema here with CPE Intelbrás WOM 5000 MIMO. CPE is set to AUTO but get /64 instead of /56.

Hi! I have used a lot this forum to solve a bunch of problems, and today i would like to contribute a little. Here is a small script to monitore the temperature of a CCR 1036, and send a email if its ok, or send a sms if its above the limit. Here in brazil temperatures can rise very quick in the sum...

A friend said that is 1480 to avoid fragmentation.

Why every CCR show 1480 MTU if you create a pppoe-server? Why not 1492 or 1500?

Hi! I have a strange problem with bonding. Here it goes the diagram: http://i.imgur.com/R5nP0Hp.jpg I have a functional bonding, with this four UBNT wireless and two RB450G working good. But if i'm the bonding 1 side, i can not access the UBNT 2 and 4. Every UBNT is on the same 192.168.56.0/24 netwo...