Hi kos, I appreciate your prompt response. Just to confirm: - In your original testing you were using MikroTik /tool traffic-generator to generate the traffic or something else? - What size of the packets you were using for "1G bidirectional traffic" test? - Have you tried the same test ag...
Reboot min requirements: - connection-tracking activated - clear routing between two interfaces - 1G bidirectional traffic, 600B packets (each interface handles 1G in each direction) If the packets are bigger (1500B): - ~2,5G bidirectional traffic If the traffic is mostly unidirectional: - ~2G unid...
Is there any way to see memory allocation per process? For example, we can see CPU cycles per processes using "/tool profile cpu=total". Does MikroTik have the same for memory usage?
Very good, but it would work only for MikroTik devices. We currently have multi-vendor environment.
I'm still looking for a confirmation made by someone from MikroTik about the current situation and plans on fixing it. MikroTik might have some newer version with the fix...
Folks, We hit that issue today and figured out that "Bandwidth Test" tool works ONLY with locally created users which doesn't make any sense! To those who will be looking for a reason why they're getting the log message like that: echo: system,error,critical login failure for user XXX via ...
Folks, Thank you for sharing your thoughts. Add black-hole /32 route for unauthorized source IP . Well, as an ultimate solution that might work. Very good. /ip route add dst-address=1.2.3.4 type=blackhole Active sessions are visible under System/scripts/jobs. Terminate these job(s) which will termin...
Folks, I have exactly the same issue with The Dude v6.40.5 (stable) and 10G interfaces on MikroTik CCR boxes with default polling interval. The Dude only uses the 32bit counters, ... That explains everything, but when we can expect that Dude software upgrade? I looked through dude_v6.xx_changelog an...
Folks, I've been trying to find a way to disconnect active SSH or Winbox/Dude session to a router. For example, I deployed a MikroTik router and by accident left admin password as default (which is no password), then I logged in to a device and realized there's unknown SSH connection (unauthorized o...
Folks, Am I right that Winbox (and The Dude server) do NOT sent the password in clear text even if they use plain mode? I tried to Wireshark the traffic and was able to recognize username only. Just want to make sure they send the password in hash or some other secure way even if they use plain mode...
I tried to find a vector-type (not a photo) rack layout stencils (from and back side) of CCR1072 which is top-level router and I found NOTHING. Is it for real? It has to be something provided directly by MikroTik. Please point me to the right direction.
2. Where I can find a list of all the log messages (with associated topics) that RouterOS can generate?
3. Does RouterOS support RADIUS command accounting?
Folks, I'd like to rise the question again. I see few similar questions ( 37069 , 62183 , etc) without an answer. I'm looking for a way to log/account issued commands and tried to enable "account" facility logging, but it didn't help much. 1. Is there any way in current RouterOS version to...
Thank you Steve for your thoughts, but it doesn't help me at all to understand re-certification procedure for MTCNA, MTCRE, MTCINE certs. Should I re-take all the classes again or just one MTCINE or just go somewhere and pass the test or series of tests and what would be the price?
Folks, I know this is very old thread, but anyways this question is still valid. Could you please point me to official document that clearly says what options are available to renew/recertify Associate and Engineer-level certs? I hold certificates from Cisco, Juniper and others and ALL of them allow...
Hi mates, Well, The Dude became unusable for some of our techs due the the fact that embedded Winbox disappeared. There're more than one discussions about that ( here ). Using custom Tool with the link to local folder (different for each user) is a pain. It's even more pain for non-Windows admins. S...
Hi Folks, Sorry for raising the same question, but I need to clarify that before we order the hardware. I'm looked through compatibility matrix MikroTik SFP module compatibility table . It says CCR1072 does support SFP+ 1m/3m DAC, but I want to make sure that CCR1072 does support Cisco SFP-H10GB-CU ...
Folks, thank you for feedback. eriitguy, 3 days after I installed CHR with The Dude on ESXi node a VM just stopped and I'm trying to figure out what caused the issue. More details here - CHR on ESXi - VM got stopped Could you please provide some details about your setup and your evaluation about how...
Folks, I got an issue with CHR 6.37.5 (bugfix) with P1-Trial license running on VMware ESXi 5.1.0. After ~3 days CHR VM got stopped. I checked logs on ESXi node: ~ 2017-06-11T04:58:37.208Z| vcpu-1| I120: CPU reset: soft (mode 2) 2017-06-11T04:58:37.220Z| vcpu-2| I120: CPU reset: soft (mode 2) 2017-0...
Hello Folks, We plan to migrate The Dude server from older version to current v6 and looking for a help in choosing the right platform for a new server. Our options are: CCR1036-12G-4S OR CHR on regular VMware ESXi hypervisor. Number of monitored MikroTik boxes: ~150 + the same number of simple moni...