Community discussions

MikroTik App

Search found 79 matches

by indnti
Mon Jun 21, 2021 11:18 pm
Forum: RouterBOARD hardware
Topic: System health - Possible wrong temperature readout?
Replies: 1
Views: 1148

System health - Possible wrong temperature readout?

Hello We have a CRS326-24S+2Q+RM where maybe the temperature analysis goes wrong. System health shows a device temperature of 88°, the SFP+ Modules show 80° or 78° or 82°. But if we plug out a module it is only hand-hot. Also the airstream is only lukewarm. Is it possible the temperature readout is ...
by indnti
Fri Jun 18, 2021 11:35 pm
Forum: General
Topic: mad temperature analysis on CRS326-24S+2Q+RM ?
Replies: 0
Views: 535

mad temperature analysis on CRS326-24S+2Q+RM ?

Hello We have a CRS326-24S+2Q+RM where I have the question if the temperature analysis goes crazy. System health shows a device temperature of 88°, the SFP+ Modules show 80° or 78° or 82°. But if we plug out a module it is hand-hot. Also the airstream is only lukewarm. Is it possible the temperature...
by indnti
Fri Jun 18, 2021 11:23 pm
Forum: RouterBOARD hardware
Topic: CRS326-24S+2Q - SNMP Temperatur Monitoring
Replies: 2
Views: 1294

Re: CRS326-24S+2Q - SNMP Temperatur Monitoring

All CRS326 serves out the device temperature on OID .1.3.6.1.4.1.14988.1.1.3.100.1.3.14, but only the newer supports OID .1.3.6.1.4.1.14988.1.1.3.10.0
by indnti
Wed Jun 16, 2021 4:59 pm
Forum: RouterBOARD hardware
Topic: CRS326-24S+2Q - SNMP Temperatur Monitoring
Replies: 2
Views: 1294

CRS326-24S+2Q - SNMP Temperatur Monitoring

Hi On one of our five CRS326-24S+2Q the device temperature can be monitored via SNMP (Zabbix) since ROS 6.48.3. On the other 4 CRS it is "not supported". They have the same newest Router OS, the same Firmware (6.48.3), the same firmware type (qca9531L) and the SNMP settings on the monitori...
by indnti
Tue Jun 16, 2020 6:39 pm
Forum: General
Topic: RB1100Dx4, best practice setting up VLAN
Replies: 4
Views: 1424

Re: RB1100Dx4, best practice setting up VLAN

OK Thanks a lot - not switch....
But what about "interface/vlan" and "bridge/vlan" ?
Can I set up on ROS 6.47 as described for CRS3xx ?
by indnti
Mon Jun 15, 2020 12:34 am
Forum: General
Topic: RB1100Dx4, best practice setting up VLAN
Replies: 4
Views: 1424

RB1100Dx4, best practice setting up VLAN

Hi

ROS 6.47
What ist the best practice to setup VLANs on RB1100Dx4?

On Bridgeports ?
On Interfaces ?
On Switch ?

Sorry the are so much possibilities. On CRS3xx I found bridge is recommended since 6.41 - but what is on 1100x4 ?
by indnti
Thu May 14, 2020 11:16 pm
Forum: General
Topic: promiscue mode - what does it let pass?
Replies: 2
Views: 936

Re: promiscue mode - what does it let pass?

Ok Thanks a lot - we will try it.
by indnti
Thu May 14, 2020 10:53 pm
Forum: General
Topic: promiscue mode - what does it let pass?
Replies: 2
Views: 936

promiscue mode - what does it let pass?

Hi We have a strange phenomena. On an IPSec connection pings goes through fast. But if we open a webserver site on that line it last minutes the content arrives. With Wireshark we can see much packet loss. We played with the MTU, but this doesn't change anything. But if the sniffer is enabled and th...
by indnti
Thu May 14, 2020 10:38 pm
Forum: SwOS
Topic: SNMP Informations SwitchOS
Replies: 0
Views: 1245

SNMP Informations SwitchOS

In contrast to RouterOS SwitchOS offers minimal informations on SNMP. I can't find any values for CPU, Temperature, VLAN IDs and so on. Has anyone a functional MIB?
by indnti
Wed Jan 29, 2020 11:47 pm
Forum: General
Topic: Best Practice CRS326 with RouterOS as Switch ?
Replies: 2
Views: 1076

Re: Best Practice CRS326 with RouterOS as Switch ?

Or is it better to have also the Mgmt port in the same bridge? The default config does that. Anyone with tips and tricks? I would be glad.
by indnti
Tue Jan 28, 2020 9:11 pm
Forum: General
Topic: Best Practice CRS326 with RouterOS as Switch ?
Replies: 2
Views: 1076

Best Practice CRS326 with RouterOS as Switch ?

Hi I want to use a new CRS326-24S+2Q+ with RouterOS but all (Q)SFP+ Port in switch mode with full 40G speed possible. I know it would be easier to use SwitchOS but I want the benefit from RouterOS Tools. What I did as-yet: Delete all RouterOS packages apart from system package and advanced tools Rem...
by indnti
Wed Dec 04, 2019 1:34 pm
Forum: RouterBOARD hardware
Topic: QSFP compatibility ?
Replies: 2
Views: 3466

QSFP compatibility ?

Hi

does anyone know if the "Q+85MP01D" 40G module or the "Q+DA0001" cable build in the new "CRS326-24S+2Q+RM" are compatible with Mellanox "ConnectX-3, MCX313A-BCCT" network cards?

Thanks!
by indnti
Thu Oct 10, 2019 2:50 pm
Forum: Useful user articles
Topic: Fritzbox as SIP Client over Mikrotik VPN
Replies: 0
Views: 5366

Fritzbox as SIP Client over Mikrotik VPN

It costs me many hours so I will share it with you. The situation: German AVM "fritzbox" as a little telephone switchboard at home. At the company a "unify" (formerly "Siemens") telephone switchboard witch offers SIP. I want the FritzBox to work as a SIP client on the c...
by indnti
Fri Sep 20, 2019 12:39 pm
Forum: Forwarding Protocols
Topic: Point-to-point (/31) addresses
Replies: 85
Views: 61705

Re: Point-to-point (/31) addresses

Hi

Any News for this?
by indnti
Wed Sep 18, 2019 8:04 pm
Forum: General
Topic: Winbox 64bit Version
Replies: 80
Views: 32987

Re: Winbox 64bit Version

>> As the acronym states [i]"Wine Is Not an Emulator"[/i] and thus if the OS kernel doesn't allow 32-bit code execution nothing AFAIK can be done. Codeweavers is working on a Crossover version that executes 32bit. But it seems to be hard. https://www.codeweavers.com/about/blogs/jschmid/201...
by indnti
Fri Mar 22, 2019 1:27 am
Forum: Announcements
Topic: v6.44.1 [stable] is released!
Replies: 86
Views: 34914

Re: v6.44.1 [stable] is released!

Upgrade CCR1016-12G. We have massive packet loss on an IPSEC connection. The bigger the packet size, the more packets are lost. - up to 45%.
Downgrading to 6.44 solves the Problem !!!
by indnti
Thu Jan 24, 2019 12:37 pm
Forum: General
Topic: Amazon AWS VPN -- A Working Configuration Example and Bug
Replies: 49
Views: 39778

Re: Amazon AWS VPN -- A Working Configuration Example and Bug

Another solution without mirror-policies and a supernet config to bypass the mikrotik one network limitation on IPsec policies:
http://biplane.com.au/blog/?p=406
by indnti
Sun Jan 20, 2019 12:37 am
Forum: Announcements
Topic: SwOS version 2.9 released!
Replies: 72
Views: 45063

Re: SwOS version 2.9 released!

[quote=kosyot post_id=709676 time=1547802033 user_id=136437]
Any with CRS317 & 2.9 ?
[/quote]

Yes. Works.
by indnti
Tue Nov 06, 2018 5:45 pm
Forum: Scripting
Topic: :resolve function and multiple ip addresses
Replies: 11
Views: 5600

Re: :resolve function and multiple ip addresses

Works great for amazon cloud addresses - thanks a lot
by indnti
Tue Oct 02, 2018 10:53 pm
Forum: SwOS
Topic: SwOS or RouterOS
Replies: 3
Views: 5249

Re: SwOS or RouterOS

IMHO SWOS is faster
by indnti
Thu Sep 13, 2018 1:16 pm
Forum: Announcements
Topic: v6.43 [current] is released!
Replies: 147
Views: 48182

Re: v6.43 [current] is released!

After reading all this posts I fear that there is a high probability to have a poor device after the upgrade.
by indnti
Thu Sep 13, 2018 10:35 am
Forum: General
Topic: L2TP is disconnect after every 8 hours
Replies: 52
Views: 24824

Re: L2TP is disconnect after every 8 hours

[quote=Dejan post_id=682915 time=1535608660 user_id=79483]
Please read thread. We are talking about problem with combination Mikrotik<->Windows ...
[/quote]

Why didn't Mikrotik talk to Microsoft directly to dispose this incompatibility ?
by indnti
Thu Sep 13, 2018 9:05 am
Forum: General
Topic: L2TP is disconnect after every 8 hours
Replies: 52
Views: 24824

Re: L2TP is disconnect after every 8 hours => exact 27387 seconds

[quote=sindy post_id=682621 time=1535468868 user_id=110692] [quote=indnti post_id=682612 time=1535466477 user_id=10406] Other Mikrotik router don't hangup Strange [/quote] Nothing strange about Mikrotik not hanging up - it simply renegotiates continuation of the IPsec session when it is about to exp...
by indnti
Wed Sep 05, 2018 3:04 pm
Forum: Announcements
Topic: Winbox vulnerability: please upgrade
Replies: 329
Views: 137614

Re: Winbox vulnerability: please upgrade

If you're curious how the bug works, this article is a good read:
https://n0p.me/winbox-bug-dissection/
This article respectively the new vulnerability CVE-2018-14847 makes me afraid of using any mikrotik product anymore
by indnti
Tue Aug 28, 2018 5:27 pm
Forum: General
Topic: L2TP is disconnect after every 8 hours
Replies: 52
Views: 24824

Re: L2TP is disconnect after every 8 hours => exact 27387 seconds

Same. After >>> exact 27387 seconds <<< the connection is disconnected. You can see the this number of seconds in sindys article: "18:58:53 l2tp,ppp,info,account dedecek logged out, 27387 24129137 55951331 123213 10683" My Router: 15:54:27 l2tp,ppp,info,account xxxxxx logged out, 27387 495...
by indnti
Thu Jul 26, 2018 12:46 am
Forum: Announcements
Topic: SwOS version 2.8 released!
Replies: 37
Views: 26089

Re: SwOS version 2.8 released!

CSS326-24G-2S+ v 2.7 doesn't see the upgrade on the upgrade page.
After upgrading manually from 2.7 to 2.8 the switch boots into 2.0p - from that version I can upgrade manually to 2.8 ...
by indnti
Fri Jul 20, 2018 2:48 am
Forum: Forwarding Protocols
Topic: Point-to-point (/31) addresses
Replies: 85
Views: 61705

Re: Point-to-point (/31) addresses

Is there any fundamental reason why mikrotik does not support RFC 3021, so it is compatible with other vendors (cisco) without problems?
by indnti
Sat Apr 14, 2018 4:00 am
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 147729

Re: v6.42rc [release candidate] is released!

Whats going on with 6.42 ? Problems over problems. Bricked hardware, update problems without ends. Maybe you begin from scratch :-(
by indnti
Mon Feb 19, 2018 6:06 pm
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 147729

Re: v6.42rc [release candidate] is released!

It can not be true that one be forced to use rc20 till the end of lifetime of that hardware! You are not forced to use rc20. Use netinstall to install version. What about that experience: Bricked RB3011UiAS-RM by updating from rc20 To rc27. LCD shows always "starting services"... Netinsta...
by indnti
Sun Feb 18, 2018 11:17 pm
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 147729

Re: v6.42rc [release candidate] is released!

Answered many times before! The old version is the one that performs upgrade. We can't fix a released and installed version. If you bring out a version that *bricks* hardware you must consider that it will not happen. maybe a special intermediate version to repair version rc20-24. It can not be true...
by indnti
Fri Feb 16, 2018 3:47 pm
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 147729

Re: v6.42rc [release candidate] is released!

As it was mentioned several times before in this topic. Upgrade happens on old version 6.42rc17 - 6.42rc24 are bad versions, so if you want to upgrade from these versions, use netinstall from the beginning. Will there be no fix that is ist possible to upgrade from one of this versions? Or what a bo...
by indnti
Fri Feb 09, 2018 6:06 pm
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 147729

Re: v6.42rc [release candidate] is released!

FYI. Upgrade from 6.42rc15 to rc24 on CRS125-24G-1S works fine
by indnti
Wed Jan 17, 2018 12:49 am
Forum: Announcements
Topic: SwOS version 2.7 released!
Replies: 31
Views: 21300

Re: SwOS version 2.7 released!

CSS326 can only perform SwitchOS, CRS326 can perform SwitchOS [i]or[/i] RouterOS
by indnti
Thu Jan 11, 2018 7:35 pm
Forum: Announcements
Topic: SwOS version 2.7 released!
Replies: 31
Views: 21300

Re: SwOS version 2.7 released!

Switch OS 2.7 displays no hosts anymore because of a javascript error:

Firefox: ERROR: SyntaxError: missing ] after element list
Safari: ERROR: SyntaxError: Unexpected token ')'. Expected either a closing ']' or a ',' following an array element.
Edge: ERROR: SyntaxError: Expected ']'
by indnti
Mon Nov 27, 2017 5:04 pm
Forum: SwOS
Topic: CSS326 slow SFP+ speed
Replies: 24
Views: 12939

Re: CSS326 slow SFP+ speed

When will 2.7 be released? Also the fan problem on CRS-317 has to be fixed asap
by indnti
Fri Nov 17, 2017 10:23 pm
Forum: RouterBOARD hardware
Topic: CRS317-1G-18S+RM ?
Replies: 1
Views: 951

CRS317-1G-18S+RM ?

CRS317-1G-***18***S+RM
What's that? When will it be available ?
https://shop.omg.de/mikrotik/routerboar ... m/a-14446/
by indnti
Thu Nov 16, 2017 5:18 pm
Forum: Announcements
Topic: SwOS version 2.6 released!
Replies: 30
Views: 17299

Re: SwOS version 2.6 released!

When will the fan problem with CRS 317 be fixed in switchos? The fan is going off and on every few seconds. If the temparature on a SCP module reaches 40° it goes on and if it goes down to 39.9° the fan goes off - and so on. I think that reduces the lifetime of the fan dramatically!
by indnti
Wed Nov 15, 2017 4:49 pm
Forum: RouterBOARD hardware
Topic: CRS317-1G-16S+RM Fan speed [SOLVED]
Replies: 16
Views: 6907

Re: CRS317-1G-16S+RM Fan speed [SOLVED]

When will it be fixed in switchos? The fan is going off and on every few seconds. If the temparature on a SCP module reaches 40° ist goes on and if it goes down to 39.9° the fan goes off - and so on. I think that reduces the lifetime of the fan dramatically!
by indnti
Wed Oct 25, 2017 2:11 pm
Forum: General
Topic: Mikrotik Rack-mounted Devices Visio Stencils
Replies: 51
Views: 51166

Re: [ATTACHED] Mikrotik Rack-mounted Devices Visio Stencils

Thanks. But why do you make it impossible to edit the shapes? I want to create a new one for CRS317 from a copy of the CCR1016 shape. But no chance. :-(
by indnti
Fri Feb 19, 2016 1:32 am
Forum: General
Topic: Tutorials blogs and other helpful RouterOS resources
Replies: 65
Views: 62178

Re: Tutorials blogs and other helpful RouterOS resources

40 high recommended video tutorials in german by pascom brothers https://i.ytimg.com/vi/UHyTbfC6Pys/mqdefault.jpg https://www.youtube.com/playlist?list=PLnzEbgyK52GvvgQ4L2s_kskQcFmTPVCX3 01 Einführung 5:46 02 Grundlagen 9:13 03 Internetzugang 9:04 04 Firewall 10:29 05 DHCP Server 10:24 06 WLAN Konf...
by indnti
Fri Feb 19, 2016 1:10 am
Forum: General
Topic: gilbc buffer overflow bug
Replies: 4
Views: 1156

gilbc buffer overflow bug

Arstechnica writes that "researchers have discovered a potentially catastrophic flaw in one of the Internet's core building blocks that leaves hundreds or thousands of apps and hardware devices vulnerable to attacks that can take complete control over them." http://arstechnica.com/security...
by indnti
Wed Aug 05, 2015 2:27 am
Forum: The User Manager
Topic: Userman Profile Limitation
Replies: 9
Views: 4484

Re: Userman Profile Limitation

We have the same error that no profile is found, if we set an uptime limitation.
It seems setting any limitation in a profile damages the user account
by indnti
Mon Jul 06, 2015 2:57 pm
Forum: RouterBOARD hardware
Topic: FYI: Photo of RB922 + R11e + enclosure StationBox InSpot
Replies: 25
Views: 8499

Re: FYI: Photo of RB922 + R11e + enclosure StationBox InSpot

FYI: RouterBOARD RB/912UAG-2HPnD and Mini-PCI-Express R11e-5HacD doesn't work together in a satisfying way. There are regular kernel failures, hangs and reboots...
by indnti
Mon Jul 06, 2015 2:31 pm
Forum: RouterBOARD hardware
Topic: SFP-Modul LC S-85DLC05D and Ubiquiti Edge Switch
Replies: 0
Views: 785

SFP-Modul LC S-85DLC05D and Ubiquiti Edge Switch

Hi

Does anyone know if the Mikrotik 1,25G SFP-Modul LC S-85DLC05D is working with an Ubiquiti Edge Switch ES-24-250W ? It isn't listed on the ubnt site: http://community.ubnt.com/t5/EdgeSwitch ... -p/1106319
by indnti
Wed Jun 10, 2015 1:12 pm
Forum: The User Manager
Topic: User Manager users losing active profiles randomly
Replies: 1
Views: 1388

Re: User Manager users losing active profiles randomly

Same problem. Profile with limitation is lost and we can't find any reason. Do you find a solution?
by indnti
Wed Jun 10, 2015 1:03 pm
Forum: The User Manager
Topic: User Manager Limitations
Replies: 2
Views: 3650

Re: User Manager Limitations

Hi [quote="iqt"] Login after 20:00 is working (as expected) but at midnight User Manager is sending a [b]Disconnect-Request 6[/b] and [u]removes[/u] the profile from the user. [/quote] Same problem here - after the limitation time is reached, the profile is removed but shown as active. We ...
by indnti
Tue May 19, 2015 2:05 am
Forum: General
Topic: Capsman and SNMP
Replies: 0
Views: 739

Capsman and SNMP

Hi

Is there any possibility using SNMP to request MAC addresses from connected wlan clients on APs that are managed by capsman?

nti
by indnti
Thu Jan 29, 2015 11:48 pm
Forum: General
Topic: Can't establish IPSEC VPN to pfSense 2.2
Replies: 2
Views: 2492

Re: Can't establish IPSEC VPN to pfSense 2.2

Found a solution ... - The PSK has a "!" in it. Changing to only alphanumeric helps. But a "!" shoukd be allowed I think?
by indnti
Thu Jan 29, 2015 11:20 pm
Forum: General
Topic: Can't establish IPSEC VPN to pfSense 2.2
Replies: 2
Views: 2492

Can't establish IPSEC VPN to pfSense 2.2

I can't establish an IPSEC VPN from ros 6.25 to the new pfSense 2.2 (StrongSwan) "error failed to pre-process ph2 packet." The paramter seem to be equal 22:13:29 ipsec,debug,packet IDci matches proposal. 22:13:29 ipsec,debug,packet IDcr prefix/ulproto does not match proposal. 22:13:29 ipse...
by indnti
Tue Dec 02, 2014 7:36 pm
Forum: General
Topic: RB1100AHX2 completly damaged by 6.23RC9
Replies: 2
Views: 1572

RB1100AHX2 completly damaged by 6.23RC9

You said RC10 fixed the problem. But who repairs our RB1100? :( :( :(
Netinstall doesn't work for that devices anymore. Do you have any idea?
by indnti
Mon Dec 01, 2014 12:47 pm
Forum: General
Topic: ROS 6.23RC9 bricks RB1100AH [Fixed]
Replies: 6
Views: 2486

Re: ROS 6.23RC9 bricks RB1100AH

[quote]Please note that "brick" here is a strong word. The damage is not irreversible. Just use Netinstall to downgrade to an older stable version of RouterOS, like 6.22, and your 1100AH will be back up and running.[/quote] Till now we are not able to bring the router up via netinstall. Th...
by indnti
Sun Nov 30, 2014 4:34 pm
Forum: General
Topic: ROS 6.23RC9 bricks RB1100AH [Fixed]
Replies: 6
Views: 2486

ROS 6.23RC9 bricks RB1100AH [Fixed]

Upgrading to 6.23 RC9 brings two RB1100AH in an endless boot loop. :( :( :(
by indnti
Sat Nov 29, 2014 11:37 pm
Forum: Wireless Networking
Topic: Capsman, Hotspot, Usermanager
Replies: 0
Views: 1253

Capsman, Hotspot, Usermanager

Hello
Is there anything to pay attention for setting up capsman, hotspot and usermanager together on the same router?
I found the option "interworking (; Default: ) IEEE 802.11u, Hotspot 2.0 related settings" in the capsman manual, but this option isn't available on ros 6.22 with capsman v1
by indnti
Tue Nov 11, 2014 1:30 pm
Forum: General
Topic: v6.21.1 released
Replies: 112
Views: 34872

Re: v6.21.1 released

Our RB 1100 AHX2 hangs completly after 4 or 5 days :evil:
Dont't install 6.21.1 :!:
by indnti
Sat Nov 08, 2014 10:29 pm
Forum: Beginner Basics
Topic: L2TP + IPsec connect works but i ........
Replies: 4
Views: 2332

Re: L2TP + IPsec connect works but i ........

Same Problem - Do you found a solution?
by indnti
Fri Nov 07, 2014 10:35 am
Forum: General
Topic: CAPsMAN v2 ready for testing
Replies: 201
Views: 118336

Re: CAPsMAN v2 ready for testing

Please can someone tell how to configure the "package-path" and how the upload of a packag take place
by indnti
Fri Nov 07, 2014 1:43 am
Forum: General
Topic: CAPsMAN v2 ready for testing
Replies: 201
Views: 118336

Re: CAPsMAN v2 ready for testing

It's great that one can upgrade the caps now! But how is the upgrade and package-path configured? Have I upload the packages to "files" manually? /caps-man> manager print enabled: yes certificate: none ca-certificate: none package-path: upgrade-policy: suggest-same-version require-peer-cer...
by indnti
Tue Nov 04, 2014 10:39 pm
Forum: General
Topic: v6.21.1 released
Replies: 112
Views: 34872

Re: v6.21.1 released

This is crazy... MT I would rather wait months for updates if you guys would test them properly! If you need BETA testing, make a different BETA branch for the firmware! Lost connection to Userman database after upgrading from 6.20 to 6.21.1 :( Had to set the path to the database and repair it. /to...
by indnti
Wed Oct 15, 2014 6:45 pm
Forum: RouterBOARD hardware
Topic: mAP 802.3af support
Replies: 47
Views: 25684

Re: mAP 802.3af support

Do you know if HP 2530-24G-PoEP Switch (J9773A) will work?
by indnti
Wed Oct 01, 2014 8:12 pm
Forum: Wireless Networking
Topic: CAPsMAN and self generated certificate
Replies: 0
Views: 1078

CAPsMAN and self generated certificate

Hi Please, can anyone explain how to get Capsman Manager and a Capsman Client play together NOT with auto configuration but self generated certificate on the Manager router. I can't get this right. I try miscellaneous constellations. I leave system/certificates blank on the AP. I install the CA cert...
by indnti
Tue Jul 29, 2014 11:28 pm
Forum: General
Topic: Error in Winbox 3beta at Ipsec Policy
Replies: 3
Views: 2228

Error in Winbox 3beta at Ipsec Policy

A Ipsec Policy can't be configured because the priority isn't set "ingeger in range [0;-1] expected", even it is set to "0". The config with Winbox 2 oder webfig shows the correct priority without errors.
by indnti
Tue May 13, 2014 11:07 pm
Forum: RouterBOARD hardware
Topic: CCR - Secondary PSU
Replies: 58
Views: 27561

Re: CCR - Secondary PSU

Did someone upgrade the CCR 1016/36 to a dual power machine? How could I do it? There is not enough space for a second PSU inside. Do you buy two new smaller PSU and make a second hole for the power cable tail in the chassis? Or do you take an external PSU and wire it to the internal connector?
by indnti
Sun Apr 13, 2014 1:31 am
Forum: Beginner Basics
Topic: CRS VLAN Management IP
Replies: 11
Views: 10298

Re: CRS VLAN Management IP

[quote="efaden"][quote="pingus"]I went back to my Cisco L3 Switch .... Mikrotik should stop selling them![/quote] I have it partially working... there are some bugs currently though. There are a bunch of fixes in 6.12 and supposedly there will be more examples documented.[/quote]...
by indnti
Tue Apr 08, 2014 3:58 pm
Forum: General
Topic: Heartbleed vulnerability OpenSSL [RouterOS IS NOT affected]
Replies: 9
Views: 9612

Re: Heartbleed vulnerability in OpenSSL - RouterOS affected?

[quote] all prior RouterOS releases are not affected by this issue as older OpenSSL libraries where used.
6.12 will have newer OpenSSL with this vulnerability patched. [/quote]

Is Router OS 6.x effected or not? And if so, where can I download Version 6.12 ?
by indnti
Thu Mar 13, 2014 8:45 pm
Forum: The User Manager
Topic: Access Manager (Free Radius for Mikrotik) - Your Views?
Replies: 35
Views: 16607

Re: Access Manager (Free Radius for Mikrotik) - Your Views?

Thanks for your quick answer. I try to register to the forum, but it doesn't work: I got "Could not open socket" after sending registration data.
by indnti
Thu Mar 13, 2014 7:16 pm
Forum: The User Manager
Topic: Access Manager (Free Radius for Mikrotik) - Your Views?
Replies: 35
Views: 16607

Re: Access Manager (Free Radius for Mikrotik) - Your Views?

Very nice work to reduce the Usermanager to a practical interface for hotel employes and others. But how will it be configured with router os? There is only an example for freeradius on your webpage.
And it would be nice to have the possibility to print out user access and session data.
by indnti
Thu Aug 01, 2013 2:00 am
Forum: General
Topic: 6.2 Proxy
Replies: 2
Views: 1682

6.2 Proxy

It seems that 6.2 Proxy has problems with a parent one. If I try to configure a parent in Winbox, a error messages appears that the I can't insert that IP, because it is not in the same address family as the source. If I configrued it in the terminal it goes - but parent proxy doesn't work, the requ...
by indnti
Fri Jul 26, 2013 5:23 pm
Forum: General
Topic: RouterOS 6.1 released
Replies: 198
Views: 66674

Re: RouterOS 6.1 released

[quote="MiKeDaDoC"]Hi Folks, Problem was that only on IPSec Peer would establish correct SAs, randomly, that means it doesn't matter if it was the netgear or a RB2011xx. Analysing the problem showed that one had to deactivate all but one peer, this peer would come up perfectly. Then activa...
by indnti
Thu Feb 21, 2013 4:48 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1081974

Re: CLOUD CORE ROUTER

When will METAROUTER be implement on the new cloud core router ?
by indnti
Wed Apr 11, 2012 4:06 pm
Forum: General
Topic: 2 PPPOE client sessions on one WAN connection?
Replies: 5
Views: 2253

2 PPPOE client sessions on one WAN connection?

I have one DSL cabel with one modem, but I need to run two pppoe client sessions parallel. At the moment there is a vigor modem/router with the first pppoe acoount, behind the vigor the mikrotik handels the second pppoe (the vigor is able to passthrough pppoe). I want to configure both of the pppoe ...
by indnti
Fri Dec 03, 2010 1:01 am
Forum: General
Topic: RouterOS v5.0 RC4
Replies: 72
Views: 18794

Re: RouterOS v5.0 RC4

RC3 and RC4 doesn't work for us. The router RB433UAH has an UMTS Connection on USB port. It's a Huwai/Vodafone K4505. The router reboots if watchdog is enabled or stops working on both the UMTS and lan interface. There is no informative entries in the log about this failures. I will send a supot fil...
by indnti
Tue Oct 26, 2010 10:46 pm
Forum: General
Topic: Can't get Vodafone UMTS K3765-Z work
Replies: 1
Views: 2337

Re: Can't get Vodafone UMTS K3765-Z work

I've changed the channel to "3" and no the modem dials correctly /interface ppp-client> print Flags: X - disabled, R - running 0 R name="Vodafone" max-mtu=1500 max-mru=1500 mrru=disabled port=usb2 data-channel=3 info-channel=3 apn="web.vodafone.de" pin="" user...
by indnti
Tue Oct 26, 2010 8:35 pm
Forum: General
Topic: Can't get Vodafone UMTS K3765-Z work
Replies: 1
Views: 2337

Can't get Vodafone UMTS K3765-Z work

Hi I'm trying to get a Vodafone K3765-Z ATI Manufacturer: ZTE INCORPORATED Model: K3765-Z Revision: BD_VDFP673A1V1.0.0B02 IMEI: 353679034292957 +GCAP: +CGSM,+FCLASS,+DS OK ATZ OK working on ROS 4.11 and 5.0RC1 on RB 433. But after dialing the connection is droped and the usb/serial port is inactive....
by indnti
Mon Dec 10, 2007 2:37 pm
Forum: General
Topic: 3.0RC 11
Replies: 1
Views: 1430

3.0RC 11

3.0RC11 is working complete instable. 3 days running it hangs 5 or 6 times. Trying to downgrade to RC10 doesnt work - it boots in RC11 again :evil:
by indnti
Sat Nov 03, 2007 2:34 am
Forum: General
Topic: 3.0rc9 PPTP server trouble
Replies: 12
Views: 2379

Re: 3.0rc9 PPTP server trouble

[quote="Chupaka"] [b]what did I paid for?!.[/b][/quote] I paid for a release, not for a beta. But I think MT needs the FEEDBACK of betatesters. If they need more information I will try to provide them, but communication is not a one way road. I will help to make MT 3.0 OS good and stabil b...
by indnti
Fri Nov 02, 2007 3:50 pm
Forum: General
Topic: 3.0rc9 PPTP server trouble
Replies: 12
Views: 2379

Re: 3.0rc9 PPTP server trouble

[quote="Chupaka"]have written to support, waiting...[/quote]

Any news?
If there is no solution I have to downgrade to 2.9.x :(
by indnti
Tue Oct 30, 2007 1:20 am
Forum: General
Topic: 3.0rc9 PPTP server trouble
Replies: 12
Views: 2379

Re: 3.0rc9 PPTP server trouble

We have the same problem with 3.0rcxx With 2.9.xx pptp works fine. Hardware is a Soekris 4801 board 15:50:55 pptp,ppp,info <pptp-1>: initializing... 15:50:55 pptp,ppp,info <pptp-1>: waiting for call... 15:50:55 pptp,ppp,info <pptp-1>: terminating... - disconnected 15:50:55 pptp,ppp,info <pptp-1>: di...
by indnti
Tue Oct 30, 2007 12:58 am
Forum: General
Topic: 3.0RcXX - L2TP problem !
Replies: 1
Views: 1683

Re: 3.0RcXX - L2TP problem !

We have related problems with pptp connections. After two or three days of using pptp by about 10 users the pptp server goes crazy. Only rebooting Router OS solves the problem 15:50:55 pptp,ppp,info <pptp-1>: initializing... 15:50:55 pptp,ppp,info <pptp-1>: waiting for call... 15:50:55 pptp,ppp,info...
by indnti
Fri Oct 19, 2007 2:45 pm
Forum: General
Topic: 3.0rc7 ??
Replies: 23
Views: 5231

Re: 3.0rc7 ??

It seem's the Webserver is down :(