I think it was solved, I recheck all and see that OSPF don´t work properly, now don´t fail

# oct/11/2020 21:06:05 by RouterOS 6.47.4 # # model = CCR1016-12G /interface bridge add disabled=yes name=bridge1 protocol-mode=none add name=loopback /interface ethernet set [ find default-name=ether1 ] comment="WAN - XXXX - 957895511" set [ find default-name=ether2 ] comment=APWISOC2 l2...

Hello community, I have an CCR1016 and I get from my ISP connection via fiber and pppoe (ether1) and supply data service to my clients that connect via radio and pppoe to my CCR. The problem it´s that when ether1 goes down my clients disconnect too. About 200 clients have. Any idea? PPPOE SERVER add...

Nobody?

Hi, I have an CCR1016-12G working for about 5 years without problems, but 2 month ago I see random links down of all interfaces running.
The interfaces goes down and up in a few seconds.
Any idea?

Thanks in advance.

Ok, thanks for answer, I retry to do it and works. Anything I was doing wrong.
I´m really confused try a lot of things but not enough.
Thanks.

Hi, I am migrating my network to nv2, everything is improving a lot and I am very happy with NV2 the only drawback is that from the AP I cannot do MAC-telnet to the clients, before with 802.11 yes. I think it is a "problem" of the NV2 protocol because of the way it works. But if it can be ...

Yeah I know this options, but like I said I can work perfect if I set fix MCS15 and N and works really really good.
Now I stay in N and keep working with mikrotik, hope that work hard on NV2.

Thanks for advice.

Hello everyone I would like to share the experience I had while migrating to AC. I have a tower where I have a sector with netmetal (mipsbe) plus a horn RF-elements with only 3 clients SXTsq AC (ARM), the spectrum is clean and even the sector transport up to 200Mbps without problem. Signals of clien...

Thanks to all for your help, this weekend I was working on this and change the type to NBMA, I try with this type time ago but fail too. But now working fine by 3 days. I think that time ago when try NBMA fail by a misconfiguration. Now I configure good all and priorities that I think was the proble...

Ok I answer in the order you ask. - Solid it´s wired and dotted was wireless. - It´´s variable now it´s up for 12 hours, in some cases at 3 hours go down and up. Attach a file of log only OSPF in router 1 - Yes I want this - I try NBMA type and fail too and don´t work like I want. Now NBMA neighbors...

I attach all the information, if you need more information or anything let me know.

Thank you very much for your help.

1 is the main router and 2 is another secondary router.

Thanks in advance

Yes it´s unique

Hello i have implemented OSPF on my network, the type is PTMP with 3 routers. The problem is that i have a lot of little downs of neighbors. The links between routers is by wireless all of them running week by week without downs. In the attached screenshot show log of main router when the problem di...

Hello I saw a post with the same problem but don´t have response.
I have a RAW value keep time to 365 days but don´t store data, only can see RAW data of last 2 hours.
Any idea?

Thanks.

You dont need excellent english, just simple like you said: "This power limits it´s if you put regulatory-domain, in normal cases if put debug you use superchannel. I check this in my antennas, put debug and superchannel and works same power than no_country_set. But if put debug and regulatory...

I think Country Debug it´s equal or better than old no_country_set. > interface wireless info country-info no_country_set ranges: 2402-2472/b,g,gn20,gn40(30dBm) 2417-2457/g-turbo(20dBm) 5170-5250/a,an20,an40,ac20,ac40,ac80,ac160,ac80+80(17dBm) 5250-5330/a,an20,an40,ac20,ac40,ac80,ac160,ac80+80(23dB...

After upgrade from 6.38.5 to 6.43.8 board 911G-5HPacD link 8 km the result is: 6.38.5 ping -3 ms bandwidth test TCP: - 210 mbps 6.43.8 ping- 6 ms bandwidth test TCP: - 145 mbps I'm disappointed after upgrade. The only reason I made the change was that I saw in changelog: *) wireless - improved stab...

I think Country Debug it´s equal or better than old no_country_set. > interface wireless info country-info no_country_set ranges: 2402-2472/b,g,gn20,gn40(30dBm) 2417-2457/g-turbo(20dBm) 5170-5250/a,an20,an40,ac20,ac40,ac80,ac160,ac80+80(17dBm) 5250-5330/a,an20,an40,ac20,ac40,ac80,ac160,ac80+80(23dB...

I lost connection on some CPE´s and PTP´s my final solution is set to country: Debug - Frecuency: Superchannel.
I think Country Debug it´s equal or better than old no_country_set.

Regards.