MikroTik

nuffrespect

Suddenly, finded strange in dhcp_v4 with old Avaya IP-phone (4610), after upgrade to 6.48.4. This models can not receive ip address. But some newer (newest) Avaya models, works normal. Tested this bug with production network, and with empty config with standalone DHCP + TEL (server-port-client) Down...

nuffrespect

The "last link up/down" times are still reported incorrectly (in the future).

+1000
Mikrotik team said earlier, that this is "some cosmetic" bug.
Next, next, in future updates, i think.

nuffrespect

SimWhite, nuffrespect, w0lt, snake27, Hyperlight - Please try to add a new firewall rule at every end of the tunnel and see if it starts to work properly? The rule should be located at the top (at least before drop rules) of input firewall filter rules chain (/ip firewall filter add chain=input act...

nuffrespect

Try to update 6.45.1 remote sites
On some remote router (mipsbe w|o wireless) on 6.45.1 i see 47 gre in Connection tracker > Tunnes UP

UPDATE:
NOW Checked Connection tracker - Tunnels UP - NO GRE 47 protocol in Connection Tracker!
Downgrade last failed router.

nuffrespect

My configurations use all types of tunnels. GRE, IPIP, EoIP. All of them, over IPsec without any problems on my end. Thanks, will try to find out, what's wrong with my situation. Something strange. MAIN router at 6.44.3 Try to update 6.45.1 remote sites On some remote router (mipsbe w|o wireless) o...

nuffrespect

My configurations use all types of tunnels.

GRE, IPIP, EoIP. All of them, over IPsec without any problems on my end.

Thanks, will try to find out, what's wrong with my situation.

nuffrespect

I have IPsec tunnels between 6.45.1 and various 6.4X versions and also all the way back to 5.26. All IPsec tunnels work without any issues on all versions I have atm. The only issue I had was that some statically defined policies, lost their peer association after the update. By selecting the corre...

nuffrespect

2 Mikrotik Team

Do you confirm some troubles with GRE interfaces + IPSec (transport) ?
What we have to do in that case?

Maybe there is something special with update? For example: We have to update passive sites first to 6.45.1 and after main router to 6.45.1
Or another way?

Thanks!

nuffrespect

GRE tunnels won't start anymore between 6.45.1 versions. But 6.44.3 <--> 6.45.1 are working fine. Is this just GRE or GRE over IPSec? Possibly an IPSec issue? The same bug... IPSec (transport + 47 proto) in established state, phases normal. GRE tunnels was in down state in 6.45.1 (not running inter...

nuffrespect

I will update Mikrotik support with the findings. Hi! Do you have some fresh findings how resolve this bug with GRE (transport) + IPSEC We have the same situation now... By the way - for some tunnels i changed from GRE to IPIP tunnel, and they are work without problem, then i returned to GRE => one...

nuffrespect

CRS354-48G-4S+2Q+ CRS354-48P-4S+2Q+ CRS332-32S+RM Will be these ever released ? up up up will be these ever be released ? It is one year from announcement and still nothing, not a single official word about these units.... I don't get it. It was announcement again at MUM Europe 2019, orders since Q...

nuffrespect

Update
sent message to support@mikrotik to investigate situation

nuffrespect

I'm also seeing wAP ac crashing under load (reboot by watchdog timer) - in my case, it's a "NAT router on a stick" (separate tagged VLANs for WAN and LAN sides) and CPU load from sustained high traffic on the wired side only (wireless mostly idle) is sufficient to trigger the issue. Despi...

nuffrespect

nuffrespect

Still waiting for 48 port CRS, which was promised year ago... why is there new hardware promised when old one was never released?

Q4’2019
That’s fail, i think- 2years from release. We will looking another brand
¯\_(ツ)_/¯

[*]

Crs354.png

nuffrespect

Another "bug" from version to version, form stable to stable release "Future" time on GRE tunnels in (up\down) status field May be someone know how it resolve? Thanks! Check System / Clock All tunnel interfaces show the correct date and time on my devices. Checked, ntp-ok, sync-...

nuffrespect

Incorrect time is cosmetic Winbox bug noticed when there are multiple Winbox instances open. If you check in terminal, time is reported correctly.

What terminal command can get time UP|DOWN from gre interface status in terminal???
/interface gre .... ??

I know only for Ethernet
Thanks!

nuffrespect

Another "bug" from version to version, form stable to stable release

"Future" time on GRE tunnels in (up\down) status field
May be someone know how it resolve?
Thanks!

nuffrespect

/ interface lte firmware-upgrade lte1 upgrade=yes
.... lost connection.... reboot.... same version on modem
I have 2 carriers with 2 different SIMs. One works, one seems to block it!

Maybe that's my case too, will try to investigate too...

nuffrespect

Hi, Didn't understand this topic (how it works): *) lte - added "firmware-upgrade" command for R11e-LTE international modems (CLI only); Tried to update WAP-LTE with CLI - it shows that exist new firmware - enter "upgrade" / interface lte firmware-upgrade lte1 installed: MikroTi...

nuffrespect

Hi, Didn't understand this topic (how it works): *) lte - added "firmware-upgrade" command for R11e-LTE international modems (CLI only); Tried to update WAP-LTE with CLI - it shows that exist new firmware - enter "upgrade" / interface lte firmware-upgrade lte1 installed: MikroTik...

nuffrespect

Hi, Mikrotik team! Can't find Comments in IPSEC-PEER in table part in "inline comment mode" in CCR1009-7G, CHR, etc There is no such menu item to select in table part. But on my CHR - comments shows, but the same no such menu item to select in ipsec => peer's table part This is Bug or any...

nuffrespect

Hi, in new version of ROS 6.43 you can assign IP to SWOS in RouterOS You have to make start switch in RouterOS update it to 6.43 or netinstall it in ROS 6.43. After that, start switch in ROS and assign IP in SWOS As for me, i didn't make it before but they said about this function in changelog *) sw...

nuffrespect

Hello, We are investigating your reported issues about missing information in CRS328-24P-4S+ SFP and PoE menus. Meanwhile, you can load primary SwOS v2.7p from Serial Console in the same way as on CRS326-24G-2S+ https://wiki.mikrotik.com/wiki/SwOS/CSS326#Reset_and_Reinstall I can confirm port22 wit...

nuffrespect

@Mikrotik team

Hi!
Say us where i can find firmware 2.7p for CRS328PoE to make downgrade until some bugs in 2.8 will be solved?

Thanks

nuffrespect

@becs UPD The bug with wrong values of temp & rpm still here. Well, few hours later, after forced update or reboot, on some switches we have the same issue: - 62C CPU temp - 0С board temp - 0 RPM - 0 RPM - Empty value parameters, in some SFP+ tab excels Of coarse, forced reboot, can solve the i...

nuffrespect

UPD2 On some devices after few hours after force reboot or update, I have the same problem. 60C CPU 0C Board 0 RPM 0 RPM Because this switch in 2500 km from me, I don’t know about real cooling. + empty parameters in some excels in SFP+ tab As I wrote earlier, force reboot, solves it, but that’s not...

nuffrespect

@becs Hi, again Another bugs with POE tab & SFP+ tab in SWos 2.8 SFP+ tab Until force reboot - i saw empty excels in table with (Temp. Voltage, Tx bias Force reboot (System --> reboot) - SOLVED this POE tab Port 22 - do not "waiting for load" ScreenShots - here https://forum.mikrotik....

nuffrespect

Hi, again. After reboots i solved problem with Health tab Now, who may, check, please CRS328 POE tab & SFP+ tab (with 2.8 SWOS ) SFP+ tab ( red border - excels was empty! ) until reboot - SOLVED POE tab in our switches - this problem on all CRS328 switches, Port22 - do not waiting for load?

nuffrespect

UPD
Well, the second repeat of update - partially, i think, solved the bug
temp decrease, health page now shows systemboard's temperature.

Can someone from Mikrotik explain this?

nuffrespect

@becs Hi we have some problems with CRS328-24P after 2.8 update First of all, while downloading files - we have swos- css328p -2.8.bin - why CSS328 ?? It updates normally, but some devices - has that bug, see below link to SWOs topic https://forum.mikrotik.com/viewtopic.php?f=17&t=137372 Thanks

nuffrespect

Hi, on some CRS328-POE we have the same bug!

Some switches updated normally, some are alive, but 0 RPM with 67-72 Temp

But there was no problem with cooling with 2.7p version, loudly - yes, but no 0 RPM :/

nuffrespect

Hi we received some CRS last week, and have the same issue, too.
In RouterOS it has adaptive fan speed, in SwOS it hasn’t.
In SwOS, i think, CRS has fixed fan speed and very loud.

nuffrespect

nuffrespect

nuffrespect - Please generate supout file on your router while you see such behavior and send this file to support@mikrotik.com

@strods, for your attention

Ticket#2018020522000654, Ticket#2018013122002471

DiM

nuffrespect

CCR1016-12G Kernel fails on 6.41.1 every few hours. It did it once, so after another reboot, its failed again about a hour or so later. Sent sipout after second reboot and failure - [Ticket#2018020222004914] RE: Kernel failure 6.41. [...] Okay there is a pattern here. Its been up perfectly after it...

nuffrespect

Hi We had the same issue with CP UTM FW and mikrotik. End story with no luck :/ Tunnel was unstable, we had errors when traffic flows in encrypted tunnel. GRE encapsulation - with no luck :/ I thought that something special with Checkpoint FW “IPSec“ site2site. CP excellent works with another CP, so...

nuffrespect

Hi!
Torch doesn't work on GRE tunnel after update
Bug we have at CCR1009-7G, hex r3, CCR1009-8G

Although, everything looks good on the physical interface - torch seems works.

nuffrespect

Hi, we waited that in 76's newsletter we will see CRS317.
Although, in my tweet (2 weeks ago) you said that news (info) about this switch "coming soon" to the distributors.
No news, no updates about CRS317
Distributors don't say anything

When?

Search found 39 matches

Re: v6.48.4 [stable] is released!

Re: Winbox v3.19 released!

Re: v6.45.1 [stable] is released!

Re: v6.45.1 [stable] is released!

Re: v6.45.1 [stable] is released!

Re: v6.45.1 [stable] is released!

Re: v6.45.1 [stable] is released!

Re: v6.45.1 [stable] is released!

Re: v6.45.1 [stable] is released!

Re: IPSec failed to pre-process ph2 packet

Re: MUM Europe 2018 - New hardware incoming

Re: wAP ac overheating?Crashing

Re: wAP ac overheating?Crashing

Re: wAP ac overheating?Crashing

Re: MUM Europe 2019: new hardware

Re: v6.44 [stable] is released!

Re: v6.44 [stable] is released!

Re: v6.44 [stable] is released!

Re: v6.44 [stable] is released!

Re: v6.44 [stable] is released!

Re: v6.44 [stable] is released!

Re: Winbox v3.18 released!

Re: CRS328-24P-4S+RM SWOS Config loss

Re: SwOS version 2.8 released!

Re: SwOS version 2.8 released!

Re: SwOS version 2.8 released!

Re: CRS328-24P-4S+ - Insane Temperatures [SOLVED]

Re: SwOS version 2.8 released!

CRS328-24P-4S+ - Poe tab, SFP+ tab

Re: CRS328-24P-4S+ - Insane Temperatures [SOLVED]

Re: SwOS version 2.8 released!

Re: CRS328-24P-4S+ - Insane Temperatures [SOLVED]

Re: CRS328-24P-4S+RM Fan runs continously compared to RouterOS

Re: v6.42 [current]

Re: v6.41.1 [current]

Re: v6.41.1 [current]

Re: CCR1009 IpSec site-to-site with Checkpoint R77.30

Re: v6.40 [current]

Re: Newsletter 76