MikroTik

hotspotsolutions

easiest way I found around this was the change the port number, those automated scanning tools only ever use the default ports, so just change your SSH, telnet ports to something different (say SSH=40022)

you can do this under /ip services

hotspotsolutions

Hi, Love webfig, however I would like to see the ability to disable the "disable eable buttons" particuarly in "interfaces" you can click the "D" to disable the interface, would like a read-only or remove option for those buttons, either for individual interfaces or as ...

hotspotsolutions

RPSMA is an inferior connector to MMCX, MMCX is a MUCH better connector. I would suggest for every 751 in the field in an office, every 3rd or 4th would pop connector in a month of two in an office where the router is in an area where people move/use the area. MMCX is will never disconnect, and with...

hotspotsolutions

Good to hear normis. Small Hack for anyone who can wait for fixed board, not the prettiest but for our own use its fine, and no need to order new cables if the design will be changed. Removing the sticker shows an array of breakouts, I assume for future versions http://i.imgur.com/bybsS.jpg http://i...

hotspotsolutions

Having just received the RB751 today (200 pieces :)) I am very very disappointed to see that the MMCX connector is useless with Right Anged MMCX connectors, which I would say most if not all people use. I haven't ever seen a straight MMCX connector before (I have after googling it) however if the co...

hotspotsolutions

perfect, exactly what i'm after, will implement tomorrow, any hassles will advise.

thank you for the response, appreciate it.

hotspotsolutions

Hi,

I am wondering if anyone has used the modules from the wiki (im using vb.net module) to issue the fetch command?

Does the module need enhancing, or can you just do it via the "Send" command??

Any ideas on the syntax?

any help is appreciated.

hotspotsolutions

yeah thats fair enough, but also understand its the same costs, probably more for us to travel to the US, or more again to europe for a MUM, which is very prohibitive for alot of people here who want 2-3 people to go. I think europe and the america's have had their fair share of MUM's recently. The ...

hotspotsolutions

Count me and 4 other ppl in, but mabye not brisbane, as we live there too and a nice "business trip" is always good

hotspotsolutions

Hi Guys, I have been working with the API a bit, I am wondering how I would add a script and run that script? I understand how to run the script, but not how to add a script? how do I convert this to API code??? /system script add name="test" source=":log info(\"hello\")&quo...

hotspotsolutions

also a description field for each router would be good.

hotspotsolutions

Hi,

We use NON standard API ports, would be good on router addition that you can customize the port, otherwise I cant use it

hotspotsolutions

hi, thanks for the confirmation, (that I didn't want) Seems pretty pointless having a serial port if I cant use it, very disappointing. I have used the method mentioned in my first post to send data, but its my understanding I cant receive anything back, which is also disappointing. Seems a waste of...

hotspotsolutions

Hi, I tried the special login, but i'm either doing something wrong or it doesnt suit my needs. Let me be a little more specific: I have a serial device which has two modes: 1.) The serial device will send data down serial port every few mins, and I need to respond to it with a character/s 2.) I can...

hotspotsolutions

I know what capital letters mean.

My request is specific, perhaps it was not clear enough, clearly now it is.

Capital letters help get the point across, interpret it how you want.

hotspotsolutions

I NEED TO USE SERIAL.

I cannot use any other method.

MIKROTIK: is this possible or not?

hotspotsolutions

Hi, Ok so I see the special-login, however that seems to me to be only usable when I winbox in right, then access the console. Thats no good, I need a scripted solution. I also saw "/system serial-terminal" and this works as well, but I cant script this either. I need to be able to access ...

hotspotsolutions

Hi,

I have done that but it still doesnt work?

The serial device does not get the data sent,. I assume its neither sending nor receiving.

Is the code I sent the right code? do I need to do anything else?

hotspotsolutions

Hi, I want to connect a serial device to my RB433 board, to send/receive data. I found an example somewhere that said to use: /interface ppp-client add name="scripttemp" port=serial0 modem-init="test" null-modem=yes disabled=no :delay 1 /interface ppp-client remove [/interface pp...

hotspotsolutions

I had the same problem about 12 months ago, we had about 4-6 go within about 2 months, all ether2.

They were about 2 years old each of them.

hotspotsolutions

Hi,

I can see it now, but it was not there before (tried on 3 computers)

good to see.

thanks

hotspotsolutions

Hi,

Am I missing something? or when I refresh the changelog for 3.20 http://www.mikrotik.com/download/CHANGELOG_3

It doesnt have anything for 3.20

??

hotspotsolutions

OK: UPDATE Thanks to some help from mikrotik, it would appear at least in this instance that the ether port is faulty. The fact that clients were still trying to get leases and ROS boards were appearing in neighbors is weird to me, however it does seem to be the case. Still cant believe I have had 4...

hotspotsolutions

all those mac's are valid aps on our system (yes I know there are heaps of them) At that site about 40 radios. But all clients are being rejected, not just senao cards or our mikrotik routers, just couldnt capture them all in one screengrab at that site. That site has been functional for about 9 mon...

hotspotsolutions

Hi, Not sure if anyone else is having this issue, we have had it with about 5 routers int he last 4 weeks. On powerpc, mips and x86 boards On 3.13,3.17,3.19 ROS versions. See attached jpg for error from log. The only thing that fixes it is a replacement of hardware. The router is fairly simple setup...

hotspotsolutions

Its been a problem from 3.9(ish) right up to and including 3.16 Its not limited to amount of logins (that im aware of) Something is crashing at mikrotik's end. I have sent supouts but never get any joy. It was supposed to be fixed in 3.12 *) fixed bug - web server could lock up at startup (no access...

hotspotsolutions

great, that would really be appreciated.

We have about 950 mikrotik boards in the field at the moment, would be nice to have a script that can do everything automatically, will allow me to get a holiday at the end of the year

hotspotsolutions

Hi, we are writing an automation system where we want to update the hotspot files with new ones, so we fetch them, then we would want to move them to a new folder. I know we can do this via FTP the other way around, however I would prefer to do it via scripting. Also would be good to be able to name...

hotspotsolutions

disapointing.

would be good to have in scripting!

hotspotsolutions

Hi,

sorry to another folder.

hotspotsolutions

Hi,

I want to move a file using the /file commands, however I cant see any way to do this.

can anyone help?

hotspotsolutions

I agree, its definatley a vista thing, it does apepar to be software related, as I have 3 toshibas all exactly the same machines (bought at the same time) and 2 dont work, 1 does. They came pre installed with vista, I know for a fact mac winbox did not work out of the box, as I tested it basically s...

hotspotsolutions

Hi,

this is still a problem in 3.6 the functionality in my opinion has definately been removed.

can anyone comment on this, or how I would achieve it?

hotspotsolutions

Hi, In 2.9.x I could do the following: /system upgrade upgrade-package-source add address=192.168.100.1 user=admin password=XXXXXX In 3.X (im using 3.4) you can do this from the TERMINAL window: /system upgrade upgrade-package-source add address=192.168.100.1 user=admin XXXXXX And that works fine. B...

hotspotsolutions

absolutely not a firewall, it is disabled.

i have been trying to fix this for about 4 weeks non stop!

hotspotsolutions

Hi, Eactly as stated in the topic, I just bought 3 brand new Toshiba laptops, and none of them can use MAC Winbox anymore, which means none of my techs can get into an unconfigured router on site, which is ridiculous. I have read many posts on the forum, but cannot find a solution. I have winbox 2.2...

hotspotsolutions

Hi Guys, A little freaked out, I have used XR2's with 133s for a while, have about 50+ out working now. I have a box of 20 x RB133 boards, and about 30 or so XR2 cards, all brand new. With any combination of card and board, every time I try and enable a XR2 in the wireless table, router reboots imme...

hotspotsolutions

What I want to do is actually remove the cookie for the user on logout based on their user profile. WE have some users we want to have cookies, but some users we dont want to have cookies. When they login or logout, I want to run a script that checks their profile, if it matches my profile name &quo...

hotspotsolutions

yes I know that, but it only runs a script, it doesnt identify the user that has logged in or out, this is what I am after.

hotspotsolutions

Hi,

Just wondering if I can setup a script in the on-logout for hotspot user profiles which can get the user that has acutally logged out?

So I can run my script which will execture some code specific to that user?

hotspotsolutions

Hi, I have a client that wants to account for traffic coming from a specific interface, is there any persistant easy way to do this, I would assume you can do it via SNMP, is this correct. I dont want to do hotspot or anything like that, jsut all traffic going through a specific interface? Any sugge...

hotspotsolutions

you cannot use SSH via scripting within routerOS, would be great, but you cant currently.

hotspotsolutions

You have another option in Australia:

http://www.wifiproducts.com.au

hotspotsolutions

no you cant do any of that.

you are limited to html and variables mikrotik provides, with client side scripting such as javascript.

hotspotsolutions

Hi There is warranty an MK must solve the problem! Regards Vincenzo My experience has been that neither Mikrotik nor its resellers will honor the warranty in the case of defective hardware. I would totally disagree with this, as a reseller we always honour warranties for defective hardware, and I h...

hotspotsolutions

Thats not a bug, normally this happens when you dont have the internet connected, it wont redirect you unless your router has a working internet connection that is accessible from the hotspot side of the network.

hotspotsolutions

Hi, Ok I might be doing something wrong and I hope I am! I am trying to NAT some WG102 access points to the outside world. They use SSL for their web browser and not regular port 80. This is what I have: / ip firewall nat add chain=dstnat in-interface=ADSL protocol=tcp dst-port=10443 action=dst-nat ...

hotspotsolutions

mmm, that seems pretty inflexible to do it that way. The POE injectors Mikrotik sell are: EBU-101-01 (search on the net) The problem with these is you need 1 per device, and 1 power supply per device. We just used 16 of these on a job and you can imagine the cables and power supplies required to do ...

hotspotsolutions

Hi, I tried last night getting a RB112 via POE on a Netgear POE switch to work, but it simply doesnt power. Obviously I have changed the POE jumper, and it works fine with the Mikrotik POE adapter, but not a netgear POE switch. Has anyone else had this problem? What POE switches do people have them ...

hotspotsolutions

but how do I get the wan to get adhcp lease or wirless clients to get a dhcp lease from a different interface, thats the problem I was having?

hotspotsolutions

Hi, WE have just started using RB112 as our AP's on some jobs, and our first one I have come into an issue I am not used to. Our setup is as such: RB532On ethernet interface with hotspot enabled, and we have 16 RB112's cabled into it. The RB112's ethernet interface gets a DHCP lease from RB532, this...

hotspotsolutions

Manipulation of the html was always going to be a long shot, I never thought it was going to be a case of yeah sure, will get right on that :) But I think opening up the advert page for modification would really help. We really want to use the advet functionality but we cant justify forcing people w...

hotspotsolutions

Hi Guys, I would like to see the functionality of the Advertsing section for the hotspot increased with extra functionality. Some ideas I have are: - The ability to frameset ads instead of popup, to negate popup blockers. The click this link to proceed is fine but it is very obtrusive and when peopl...

hotspotsolutions

I started writing a script but the problem is that there are no date comparision functions available, which is going to make it really messy.

I am already up to about 30 or 40 lines and nowhere near complete.

hotspotsolutions

Changing From this config in connection tracking: enabled: yes tcp-syn-sent-timeout: 1m tcp-syn-received-timeout: 1m tcp-established-timeout: 1d tcp-fin-wait-timeout: 10s tcp-close-wait-timeout: 10s tcp-last-ack-timeout: 10s tcp-time-wait-timeout: 10s tcp-close-timeout: 10s udp-timeout: 10s udp-stre...

hotspotsolutions

Hi,

I would like to see a feature where the mt emails you when your licence is going to expire, say in 10,20,30 days etc so I an organise upgrade of licence to stay up to date with upgrades

hotspotsolutions

I dont think its an MTU issue, we have the mangle rule with "clamp to pmtu" selected as per all the examples. On the "clamp to pmtu" issue, I tried to find what that really means in the manual today cause I thought it could be that, but I couldnt find that. Mabye it is MTU, mabye...

hotspotsolutions

HI, We have the same hotspot config running in multiple locations, and its seems that some users when loogin in cannot view some websites, it generally seems to be asian websites. The latest one is yahoo.com.hk I seem to be able to view it on our test MT but he definately cannot. Is there any "...

hotspotsolutions

yes absolutely, but the problem is our server sits out on the internet, and has no way of pushing the login url back to the mikrotik because its not on the hotspot sid eof the network. That doesnt seem to make any sense to me. 2.8 used to be accessible from the server as a hotspot and you could logi...

hotspotsolutions

Hi, As per the manual I want to redirect login attempts to our external authentication server. So I set it up as manula below which works fine, goes to server and all that: Modify login page of the HotSpot servlet to redirect to the external authentication server. The external server should modify R...

hotspotsolutions

Hi, We have just changed our network setup, and our ZyXel Wifi phone now doesnt work anymore. It seems to register but cannot make any calls, it appears not to be able to get to the outside world, but can receive calls fine. Our setup is as follows: 192.168.0.254 - Dlink Modem/Router PPPoE (Mikrotik...

hotspotsolutions

MSN Skype etc stopped working for me too!!!!!!!!!!!!!!!!

Changed as per previous post to 1min and fixed it!

hotspotsolutions

We are looking at getting some more Rb532 from mikrotik, but we have a few questions: We haven't ever got any wireless cards off you before so a few questions about this: - The Mikrotik Hotspot Access Point, is the antenna detachable, if so what connector does it have, n type, sma??? - The wireless ...

hotspotsolutions

Hi,

I have brought this up before butthe ability to change proxy error pages for us is really important.

To be able to change this to something more readable would be great!

Thanks
Joshua

hotspotsolutions

We are running 2.9.12, we seem to have fixed the problem by removing the web-proxy test package.

hotspotsolutions

I am getting the following errors on our routerboard 532: echo: web-proxy,error rbuffer.cpp:52: ERROR: read() = Connection reset by peer [admin@Location] > echo: web-proxy,error rbuffer.cpp:52: ERROR: read() = Connection reset by peer [admin@Location] > echo: web-proxy,error rbuffer.cpp:52: ERROR: r...

hotspotsolutions

Hi All, I have a weird problem when trying to redirect web proxy. What i am trying to do is allow users who have proxy server setup as part of the settings in their web browser to access our hotspot without disabling their currenty proxy settings. I have managed to do this with partial success. It s...

hotspotsolutions

Hi, Ok what I have is an array, with X amount of items in it. I want to change the value of one item, say at index 2 for example. Can you do this? Icant find a way? Or do I have to manually go through it and re-create it? This is what I have curently,its long winded and I am sure there is a better w...

hotspotsolutions

ok thankyou for that, it would really be advantageuos for us, so we can provide better information, and put our logo etc on the page.

hotspotsolutions

As the topic suggest, can I customise the Proxy error pages, such as the

Mikrotik HttpProxy
Error: 504 Gateway Timeout

pages?

hotspotsolutions

Hi, I'm trying to get QoS to work with SIP. Just wondering if anyone else has done this and verify that what i have done is correct. / ip firewall mangle add chain=forward protocol=udp src-port=5060-5064 dst-port=5060-5064 \ action=mark-connection new-connection-mark=sip_conn passthrough=yes \ comme...

hotspotsolutions

Hi, Thats what I have basically, but in 2.9.6 it only ever returns the "count" property. My ping times are usually 3-8ms ie: :local ping1 :set ping1 [/ping $IpToCheck size=64 count=1] :log info ($ping1) Returns 1 :local ping1 :set ping1 [/ping $IpToCheck size=64 count=5 :log info ($ping1) ...

hotspotsolutions

Hi, I am having a similar problem. I want to store the result into a variable, and then work with that variable. Like this: :local pingVal1 ([/ping 192.168.1.245 count=5]) :log info ($pingVal1) But that only seems to store the count number, not the result. You can do it like this: :if ([/ping $IpToC...

hotspotsolutions

Hi Everyone, Just want to guage interest in a new system we finishing off at the moment. Basically it will allow any hotspot owner with a mikrotik, to use our Custom User Management a& Billing Facilities. Some of the features will be: - Secure Online Payment System - PAyment in Multi Currency to...

hotspotsolutions

its not a problem with scheduler, scheduler is fine.

its a problem with the comparison between dates.

I am suprised that a mikrotik admin has not mentioned if this is a genuine bug or not, as it definately appears to be.

hotspotsolutions

Hi Sam, That doesnt make any difference, the two local variables are declared right above the line thats not working, so they should be in local scope. I did try it, but it doesnt work. I am obviously not being stupid here, what I am doing should definately work right? The biggest issue is that this...

hotspotsolutions

Hi Guys, I wrote a script in 2.9rc9, it worked fine up until about 2.9.3 or 4, when it started acting strangely. It seems to work sometimes, but not all the time. The Line That is failing is: :local emailSubject ("KP WDS UP " . $thetime . " " . $theDate . "Total Down Time: &...

hotspotsolutions

has anyone else had this issue?

hotspotsolutions

hey thanks for that, I dont think we will go to that trouble to let them know, I guess they will just have to deal with it:)

hotspotsolutions

Hi, Ok So currently when we have an established internet connection, and a hotspot user tries to access the internet, gets redirected to the login page. Thats fine,but if the internet connection is down, you simply get a page cannot be disaplyed, no redirect. I understand why that is, but is there a...

hotspotsolutions

hi,

thanks for that, I will update our scripting system. I knew it would be something simple!

Joshua

hotspotsolutions

Hi Guys, This might be a stupid question, but when I do the following I get an error: /ip hotspot user add name="theUserName" password="pa$$word" limit-uptime=3600s profile=256 disabled=no If I take out the dollar signs it works. If I do it via winbox it works fine again. Is ther...

hotspotsolutions

Hi, We are using a Mikrotik with a Dlink DWL-2100AP as our access point, but our clients are getting disconnected for up to an hour 3-8 times a day at random times. Obviously its interferance, but we cant trace the interferance. We want to swap AP's, to something that supports Dynamic Channel switch...

hotspotsolutions

ok thanks for that, I didnt think it was.

I will just nat them out and do it from our web server.

thanks for the quick reply.

hotspotsolutions

hello, Anyone know how to use telnet in mikrotik to connect to a host, and send some commands? I want to do this via scripting, but I cant seem to work it out. I dont even know if its possible? Obviously I know how to do this via the terminal manually, but I want to automate it? By the way I am usin...

hotspotsolutions

Hi Guys, Ok over the last few days, our 2.9rc6 server has had major issues with its PPPoE-Client connection to our ADSL provider. About 5 times the interface has stopped working, and when trying to disable/enable the interface via winbox their has been a message saying something like "Not Impli...

hotspotsolutions

I cant reach the hot spot page when using a different subnet mask when specifiying a static IP address.

hotspotsolutions

Hi All, I have managed to get Universal Client to work, however when i try to access the Hot Spot with a static IP that is in a different address class it doesnt work. ie. at the momment our DHCP pool address is 192.168.1.x with subnet mask 255.255.255.0 i can access the hotspot when i set a static ...

hotspotsolutions

Thats not wishful thinking at all, I have absoltely no problem doind exactly what you have stated, I am just wondering if anyone has used and of the 1 or 2 button printers out there and what results you have had? We are looking at making our own hardware buttons to a normal COM port printer, which i...

hotspotsolutions

Hi Guys,

Has anyone used any of those printers out there with the buttons that netcomm and zyxel use to print receipts with hotspot users?

We are looking at doing this, just wondering if this is even possible?

hotspotsolutions

I have tried that, I would have thought that would work as well bu tI cant seem to get it to work. I am sure thats it, but I am just not doing it right.

hotspotsolutions

I cant find any information on either of the methods you have specified, can you point me in the right direction?

hotspotsolutions

sorry, that was propabl a stupid question, I have sorted it.

is ther a way to change that default html page?

hotspotsolutions

Hi,

I have 2.9rc6 and there is the administration website that no exists. I want to block that for external views, so bob down the road cant see the website running on port 80. ow do I do this without disabling winbox etc?

or how do I change the main webpage?

hotspotsolutions

HI Guys, I am sure this is a stupid question but, basically I want to allow web access externally to me Access point located on my internal network, via port 88 or whatever. Currently my confiq is: 3 x Interfaces: 1 x ADSL pppoe-client Interface (ADSL connected to 192.168.0. Interface_ 2 x Ethernet ...

hotspotsolutions

works for me, I have rc with hotspot running and I can get it no problems.

hotspotsolutions

yeah we use a DG632. put that straight into bridge and your away. We have never used a card directly in mikrotik, the 400ma cards that are available now seem like they are worth investigating. The other reason is we use WDS built into the 2100AP's with good results, and that means we use anywher fro...

hotspotsolutions

Hi, I have a Netgear ADSL ethernet modem in bridge mode, and the mikrotik handling the pppoe authentication. I have the modem going into one network port, and the other port has a dlink 2100ap connected to it, and thats our hotspot side. We use the mikrotik for pppoe authentication as we have dynami...

hotspotsolutions

in case anyonesinterested, this is what I put in to get it to work:

/ip firewall mangle add out-interface=ADSL action=change-mss new-mss=1400 chain=forward protocol=tcp tcp-flags=syn

hotspotsolutions

so nobody is connecting to their mikrotik with a DSL line then?

hotspotsolutions

Hi Guys, Ok I have setup a PPPoE Client to connect to my ADSL provider. It connects fine, and I can ping and get on the web ok too. in 2.8, I created a mangle rule to derease the TCP-MSS so their was no packet fragmentation. In 2.9, I see you can set it directly in the pppoe-client setup. So I have ...

hotspotsolutions

Hi,

Is there anyway to access a variable I create in mikrotik (v2.9rc6) in a say the login page?

I would like to be able to create a variable, called "Location", set its value, then access it like: $(Location)

If you cant, mabye a feature request for future?

hotspotsolutions

Hi,

I saw in the changelog that advertising support was added in 2.9, I have 2.9rc5 running but I cant find it in telnet or winbox.

Is this an enabled feature yet?

hotspotsolutions

Hi Guys, I'm looking at purchasing a routerboard 532 to run our hotspots. We genreally have between 10 and 20 users connected concurrently, will this board handle this? I've currently got a router board 230 which runs beautifully but if the 532 will do the job i will certainly go that way due to the...

hotspotsolutions

Hi, We have had over 500 attemted login attempts from what seems to be one person in the last two days on our hotspot. We assume they are using an automated login system as they are using common names for the login attempts. This has all been logged by our Windows IAS Radius server logging, but it d...

hotspotsolutions

HI,

Yeah thats what I thought, however as I said I cannot get that to work at all, even with a gateway enabled.

I have just checked, I can ping the mikrotik (10.5.50.1), and even external IP addresses, but I cant access the external IP's, or even the mikrotik IP.

weird!

hotspotsolutions

So there is no way to have a totally anonymous client connect sucessfully. That is what we require, we dont want users to have to modify their IP settings at all. We dont want to have to add them manualaly to get them to work, thats absolutely useless to us. There is no way to make it work seamlessly?

hotspotsolutions

Where do I set this information, for what purpose?

hotspotsolutions

Hi, Ok I have setup a hotspot exactly as described int he link below, the only difference being that I have sepcified external DNS servers. http://www.mikrotik.com/forum/viewtopic.php?t=231 Everything else works great, authentication, hotspot etc, except the Universal Client. Whenever I set an IP ad...

hotspotsolutions

Hi,

Thankyou for your reply, the rule you entered is actually wrong, you need to set the action=Nat, otherwise it defaults to Accept which does work.

Its working now though, thanks for your help.

hotspotsolutions

Hi,

I want to redirect all SMTP traffic through our SMTP server, so the users dont have to change their outgoing mail server in outlook etc, does anyone know ow to do this easily?

thanks
joshua

hotspotsolutions

can you tell me how this is done on freeradius, may be i might be able to apply the same principals to IAS.

thanks

hotspotsolutions

IAS comes with a whole bunch of preconfigured options. this is one of them... i just didnt realise that you could use this with mikrotik

hotspotsolutions

Hi Guys, i am using microsoft IAS server remote user policies to limit the amount of data a user can download and to shape their bandwidth etc.... its all working great except once a user has reached their download quota and get booted off the system, they can just relog in again and their quota has...

hotspotsolutions

Hi Guys,

It seems I should have been using "Ascend-Data-Rate" which works perfectly.

hotspotsolutions

Hi,

I have sucessfully got our mikrotik box working with a microsoft IAS server, logs in sucessfully.

However whenever I try to use the vendor specifica attribute "Rate-Limit", it does not work.

Anyone Sucesffuly get this to work?

hotspotsolutions

Hi, I have setup the router as per the dhcp-pool for the hotspot setup, all works a treat, but I have 1 computer that needs unrestricted access to the network. Currently this pc must login to access any network resources, but because it has a static IP addrss I cannot get it to login. What I want to...

hotspotsolutions

Hi,

I would love to simply use a database to manage users, but as far as I can see the only external managment of users that is available is a radius server?

hotspotsolutions

Hi,

I am going to develop my own radius managment system usng either ASP, or ASP.Net.

I just need some pointers on what connection I can perform to the FreeRadius server?

Any Help is appreciated.

Thankyou
Joshua

Search found 119 matches