Community discussions

Search found 9 matches

by hsvz
Sun Jun 09, 2019 1:23 pm
Forum: RouterBOARD hardware
Topic: RouterBoard Replacement
Replies: 5
Views: 997

Re: RouterBoard Replacement

I rather need 9 Ethernet port one. what do you recommend?
by hsvz
Sat Jun 08, 2019 9:06 am
Forum: RouterBOARD hardware
Topic: RouterBoard Replacement
Replies: 5
Views: 997

RouterBoard Replacement

What is the replacement for the RB493?
why almost all RouterBoard are Discontinued?!
by hsvz
Tue Jul 31, 2018 8:42 am
Forum: Beginner Basics
Topic: simple router config
Replies: 1
Views: 331

simple router config

hi i am using mikrotik 493G router-board.(routeros: 4.64.6) for doing some simple tests and i have some simple questions: as you see in this picture i simply added some IP addresses to router ports and some automatic routes have been generated /ip address> add interface=ether1 address=192.168.1.1/24...
by hsvz
Sun Jun 18, 2017 11:49 am
Forum: Beginner Basics
Topic: RAW Ethernet Packet routing
Replies: 14
Views: 1138

Re: RAW Ethernet Packet routing

As you have one L2 net you do not need routing. You can just use any switch. regarding to the provided data i you are right, but there are some other PCs which will be connected to my router and i will do some TCP/IP filtering between them in future. at the moment i am tring to solve a part of my j...
by hsvz
Sun Jun 18, 2017 11:20 am
Forum: Beginner Basics
Topic: RAW Ethernet Packet routing
Replies: 14
Views: 1138

Re: RAW Ethernet Packet routing

I'd try bridging both interfaces and applying IP or bridge firewall to manage IP traffic but I'm not sure what it is you want to achieve here . My guess (...) is that you really just need a single local subnet. many thanks for the answers i tried both solutions and both worked fine and now raw pack...
by hsvz
Sat Jun 17, 2017 1:45 pm
Forum: Beginner Basics
Topic: RAW Ethernet Packet routing
Replies: 14
Views: 1138

Re: RAW Ethernet Packet routing

Raw (non-ip) packets will not be forwarded since both pc's are in different network segments and RB will only forward IP and IPv6. I'd try bridging both interfaces and applying IP or bridge firewall to manage IP traffic but I'm not sure what it is you want to achieve here. What if i don't assign ne...
by hsvz
Sat Jun 17, 2017 12:40 pm
Forum: Beginner Basics
Topic: RAW Ethernet Packet routing
Replies: 14
Views: 1138

Re: RAW Ethernet Packet routing

MTU issue maybe? What's the L3 and L2MTUs in your raw packet? Keep in mind 493 is amongst those boards who vs current lineup make a poor choice if L2MTU is required, max effective L2MTU being 1522 whereas most current ones hover around 2028-4074 for lower ones, up to 9198-10226 range for specific s...
by hsvz
Sat Jun 17, 2017 10:57 am
Forum: Beginner Basics
Topic: RAW Ethernet Packet routing
Replies: 14
Views: 1138

Re: RAW Ethernet Packet routing

Is there any rule on IP > Firewall > Filter?
there is no rule there
i also added these two rules to ip> firewall raw
no success again! :(
ip firewall filter raw add chain=output action=accept
ip firewall filter raw add chain=prerouting action=accept
by hsvz
Sat Jun 17, 2017 8:45 am
Forum: Beginner Basics
Topic: RAW Ethernet Packet routing
Replies: 14
Views: 1138

RAW Ethernet Packet routing

Hi being a newbie in configuring Routers :( i have a mikrotik 493G router-board. I managed to configure its Ethernet ports with IP address using winbox as below (see attached drawing): NO OTHER CONFIGURATIONS ARE applied to router board (automatic generated routes are used) 1.JPG PC1 and PC2 can see...