It has been a year does this work in Windows as confirmed?

Also the boot delay post was this confirmed?

I have been having this issue updating many of my routers since 7.9+ to current (7.11.2). Per the prior reply I checked the log and "can not install lora-7.11.2: iot-7.11.2 is not installed, but is required" tried to disable and update - Failed Removed both installs - was updated. in short...

I will try again since no replies have been given to this problem BGP peer given I per the peer I can only broadcast my routes to them. They do not want any other routes my router knows save my routes (ie they do not want transit across my network ) In os 6.x this was just check or uncheck a few box...

I have a bgp router that I am only trying to broadcast my own IPs upstream. At this time one of my upstream providers is getting a lot of HE ip6 blocks in adding to my own blocks. I have a Output Network list that only gives my IP6 space. But this apparently is not enough. As uncheck connected is no...

I have just spent a few hours trying on a CHR hosted with XCP-ng and I see no way to get this to activate. I can even see if they for chr did this in the licence management and done as a Lic update. Regardless this needs to be added to winbox or a way for this to be authorized as there is no console...

I just tried to upgrade an x86 from 6.49.5,6,7 (Yes tried on clones on all three) Upon reboot they will post but not boot. These was clones of one of my x86 core routers seeing as none worked I will be holding off on the x86 upgrade and staying on ver 6 until this test passes. As I seem to have the ...

I have a site where there is 5 buildings all with a cross-connect to a MDF. All network routing is working with this poor setup but some network Level 2 leaks happen (DHCP being most common). Is there a way to limit the current bonded interfaces to only work with Level 3 and higher networks to elimi...

So soon will be possible with no scripting 1-4 months. (Via update cited above) Or wait tell 7.x 1-10 years. Not in the time frame I was hopping but can be done. I had forgotten about LtAP but client will probably stay with other board to be able to use external Antennas other wise it would be perfe...

Can Dual LTE Modems be used in Active Active Configuration? I see RBM33G supports two modems and two sim cards but every time I have worked with a MikroTik it only allows one sim at a time? is it possible to say LTE modem 0 use Sim Down and LTE modem 1 use Sim UP? https://wiki.mikrotik.com/wiki/Dual...

Here is 3 of the 5 units I will try the other persons code to see if it works [admin@89] > /export hide-sensitive # jun/23/2017 20:05:52 by RouterOS 6.38.7 # software id = # /interface bridge add admin-mac=E4:8D:8C:58:12:6E auto-mac=no name=bridge-local /interface wireless set [ find default-name=wl...

I am assuming you are asking for the rif files? but in truth if it not i need to know what you are asking. but i do not see how attach them. isp > 90 > Wired connection to 89,91,92, and via VPN 88 isp > 89 > Wired connection to 90 > From 90 Wired to 91,92 isp > 91 > Wired connection to 90 and via VP...

I have 5 MikroTek CRS 4 have there own gateway 1 linked via vpn, and 4 wired across 5 sites of one company however ever since these have been installed the client is not able to access https websites on practically any computer. Examples Microsoft.com Mail.AOL.com BankofAmerica.com WIX.com and many ...