Community discussions

MikroTik App

Search found 26 matches

by ne30n2
Sun Aug 26, 2018 12:23 pm
Forum: General
Topic: Hotspot Flag AD and AH with same Mac Address
Replies: 2
Views: 547

Re: Hotspot Flag AD and AH with same Mac Address

The IP pool already been set to None, and the DHCP lease time is already 1 day. Do I need to increase the lease time to more than 1 day?
by ne30n2
Tue Aug 21, 2018 6:20 pm
Forum: General
Topic: Hotspot Flag AD and AH with same Mac Address
Replies: 2
Views: 547

Hotspot Flag AD and AH with same Mac Address

Hi, I noticed from Hotspot Host tab that with the same Mac address, there is 2 flags - AD and AH for that same Mac address. For example, Mac address 6C:B7:49:59:A4:4D has 2 flag with different IP address. What seems to cause this issue and any idea how to prevent this? Another question is that i als...
by ne30n2
Tue Jun 26, 2018 6:16 pm
Forum: General
Topic: No Internet access after migrating
Replies: 3
Views: 661

Re: No Internet access after migrating

Hi Jarda,

Thank you for your reply. I tried what you have just suggested. Still no Internet Access from LAN.
Any suggestion?
by ne30n2
Tue Jun 26, 2018 5:23 pm
Forum: General
Topic: No Internet access after migrating
Replies: 3
Views: 661

No Internet access after migrating

Hello, I just purchase another mikrotik CCR1009-7G-1C-1S+ which is pre-installed as RouterOS 6.40.8. I migrate all the backup to this new mikrotik and having problem accessing internet from Local LAN. I can ping google.com with no problem. The MAC address has been reset. I looked through all my scri...
by ne30n2
Tue Aug 15, 2017 5:26 pm
Forum: General
Topic: Please explain: Simple Queue and PCQ insight
Replies: 6
Views: 1351

Re: Please explain: Simple Queue and PCQ insight

So with CCR although with large number of queue with dynamic and static status, say 200 queues, everything should be still optimized. There is no much different between implement simple queue nor pcq
by ne30n2
Tue Aug 15, 2017 3:58 pm
Forum: General
Topic: Please explain: Simple Queue and PCQ insight
Replies: 6
Views: 1351

Re: Please explain: Simple Queue and PCQ insight

Okay Thank you. One more question, I'm currently have CCR1009. In case I have following situation with both Hotspot in ether5 with DHCP sever "Hotspot_DHCP", for example, and Lan (no authen) in ether6with "Lan_DHCP". I want to limit speed of Hotspot user at 30M/10M by specifying rate limit in hotspo...
by ne30n2
Tue Aug 15, 2017 2:47 pm
Forum: General
Topic: Please explain: Simple Queue and PCQ insight
Replies: 6
Views: 1351

Re: Please explain: Simple Queue and PCQ insight

ne30n2 wrote: I have read through mikrotik wiki and doesn't have full understand how simple queue and pcq works. Mayb that 's because my bad english and not native. I am currently limiting download and upload speed of Hotspot user by specfying limit in Hotspot profile rate limit. I can see that thi...
by ne30n2
Tue Aug 15, 2017 2:34 pm
Forum: Scripting
Topic: Removing expired userman users from active user in hotspot
Replies: 1
Views: 942

Removing expired userman users from active user in hotspot

I noticed that some of the expired user created from Userman if they still have not reach keepalive or idle timeout criteria in Hotspot setting, those users still have internet access although their accounts have already been expired. For example, "user1234" were created from User manager with 10day...
by ne30n2
Tue Aug 15, 2017 6:20 am
Forum: General
Topic: Please explain: Simple Queue and PCQ insight
Replies: 6
Views: 1351

Please explain: Simple Queue and PCQ insight

I have read through mikrotik wiki and doesn't have full understand how simple queue and pcq works. Mayb that 's because my bad english and not native. I am currently limiting download and upload speed of Hotspot user by specfying limit in Hotspot profile rate limit. I can see that this limit show in...
by ne30n2
Mon Aug 14, 2017 6:30 am
Forum: Beginner Basics
Topic: Simple Queue and PCQ Please explain
Replies: 2
Views: 679

Re: Simple Queue and PCQ explain

Anyone?
by ne30n2
Sun Aug 13, 2017 11:45 am
Forum: Beginner Basics
Topic: Simple Queue and PCQ Please explain
Replies: 2
Views: 679

Simple Queue and PCQ Please explain

I have read through mikrotik wiki and doesn't have full understand how simple queue and pcq works. Mayb that 's because my bad english and not native. I am currently limiting download and upload speed of Hotspot user by specfying limit in Hotspot profile rate limit. I can see that this limit show in...
by ne30n2
Wed Jul 26, 2017 6:57 pm
Forum: General
Topic: PCC issue with Hotspot: possible issue with Hotspot: Auth fuction
Replies: 4
Views: 1352

Re: PCC issue with Hotspot: possible issue with Hotspot: Auth fuction

1500718056415.jpg Is working fine after adding the Nat rule in previous post.
by ne30n2
Mon Jul 24, 2017 10:15 am
Forum: General
Topic: PCC issue with Hotspot: possible issue with Hotspot: Auth fuction
Replies: 4
Views: 1352

Re: PCC issue with Hotspot: possible issue with Hotspot: Auth fuction

I managed to solve this issue by adding NAT rule as following. Hoping someone came across this post will find a solution to there problem.
/ip firewall nat add action=accept chain=pre-hotspot disabled=no dst-address-type=!local hotspot=auth
by ne30n2
Sat Jul 22, 2017 1:33 pm
Forum: General
Topic: PCC issue with Hotspot: possible issue with Hotspot: Auth fuction
Replies: 4
Views: 1352

PCC issue with Hotspot: possible issue with Hotspot: Auth fuction

I am setting up my CCR1009 with following config. I'm implementing pcc method for loadbalancing. Surfing on bridge 2 (LAN with no login Authen) is working fine. However, when it come to surfing on bridge1 (Hotspot Authen) the internet is not working. It is taking long time to load one page and somet...
by ne30n2
Fri Jul 21, 2017 5:29 pm
Forum: General
Topic: Firmware downgrading to version lower than Factory Firmware due to iOS issue with login page
Replies: 7
Views: 1143

Re: Firmware downgrading to version lower than Factory Firmware due to iOS issue with login page

Here it is Normis /interface bridge add comment="bridge1: ether 4-5 as HOTSPOT" name=bridge1 add comment="bridge2: ether 6-7 as LAN" name=bridge2 /interface ethernet set [ find default-name=combo1 ] disabled=yes set [ find default-name=ether1 ] name=ether1-WAN set [ find default-name=ether2 ] name=e...
by ne30n2
Fri Jul 21, 2017 5:07 pm
Forum: General
Topic: Firmware downgrading to version lower than Factory Firmware due to iOS issue with login page
Replies: 7
Views: 1143

Re: Firmware downgrading to version lower than Factory Firmware due to iOS issue with login page

Hi Normis, Before posting this post, if have done some research on this. As the login page does not show up, I did as following (as mentioned in the question) 1. add the walled garden (meaning i did try adding and not adding this rule at the time the login page issue) 2. change hotspot dns to .go .n...
by ne30n2
Fri Jul 21, 2017 2:09 pm
Forum: General
Topic: Firmware downgrading to version lower than Factory Firmware due to iOS issue with login page
Replies: 7
Views: 1143

Re: Firmware downgrading to version lower than Factory Firmware due to iOS issue with login page

Oh well Normis, please help to advice if I have any mistake config this. Here is my code. I would love professional person to help looking at my config. I am a newbie myself. #RouterOS 6.39.2 # /interface bridge add arp=reply-only comment="bridge1: ether 4-5 as HOTSPOT" name=bridge1 add arp=reply-on...
by ne30n2
Fri Jul 21, 2017 11:39 am
Forum: General
Topic: Firmware downgrading to version lower than Factory Firmware due to iOS issue with login page
Replies: 7
Views: 1143

Re: Firmware downgrading to version lower than Factory Firmware due to iOS issue with login page

Please note that after trying to downgrade. The log show an error: omitting package system-6.35: min RouterOS version is 6.38.5
by ne30n2
Fri Jul 21, 2017 9:26 am
Forum: General
Topic: Firmware downgrading to version lower than Factory Firmware due to iOS issue with login page
Replies: 7
Views: 1143

Firmware downgrading to version lower than Factory Firmware due to iOS issue with login page

Hi, I'm currently have CCR1009 which I have already upgraded to latest stable version 6.39.2. I am experiencing issue with iOS device not automatically showing up login page. What I have tried after researching are 1) Use walled gargen 2) change DNS name to external. None of this work for me. So I g...
by ne30n2
Thu Jul 20, 2017 7:54 pm
Forum: General
Topic: {Urgent] Please look at my setting: experiencing unstable data transfer and laging
Replies: 9
Views: 1009

Re: {Urgent] Please look at my setting: experiencing unstable data transfer and laging

Ok. On a CCR it is usual to see that figure. I am still not completely convinced that it is correct. At least it is the average over all CPUs so it is not relevant for the load on a single CPU. Try to reproduce the issue and check if it occurs on a directly wired ethernet link to your router (can b...
by ne30n2
Thu Jul 20, 2017 7:10 pm
Forum: General
Topic: {Urgent] Please look at my setting: experiencing unstable data transfer and laging
Replies: 9
Views: 1009

Re: {Urgent] Please look at my setting: experiencing unstable data transfer and laging

Hi Peich, Thx for your reply. I did tried to change classifier from both address to src-address to see different as recommended from Jimmy and Zaib's. Will wait and see how user comments on this. Regarding your point. CPU load is super low. It actually maintain low level at 0% and 1%. L7 matches I p...
by ne30n2
Thu Jul 20, 2017 4:27 pm
Forum: General
Topic: {Urgent] Please look at my setting: experiencing unstable data transfer and laging
Replies: 9
Views: 1009

Re: {Urgent] Please look at my setting: experiencing unstable data transfer and laging

Thx Jimmy and Amt, My curiousity is that in Zaib's post. He mentioned that using src-address would solve the problem of broken link. However, I cannot see in his setting mentioning about scr-address or that has already been covered in using both address and port classifier. I'm very new. Please help...
by ne30n2
Thu Jul 20, 2017 1:52 pm
Forum: General
Topic: {Urgent] Please look at my setting: experiencing unstable data transfer and laging
Replies: 9
Views: 1009

Re: {Urgent] Please look at my setting: experiencing unstable data transfer and laging

Hi Jimmy,

Thx for your reply. Believe me that i am just a newbie myself, and following others' guide as well.

Could you please provide link to Zaib's guide you said help to solve your problem? The surfing experience and complaint have driven me crazy.

Thx
Nick
by ne30n2
Thu Jul 20, 2017 10:35 am
Forum: General
Topic: {Urgent] Please look at my setting: experiencing unstable data transfer and laging
Replies: 9
Views: 1009

{Urgent] Please look at my setting: experiencing unstable data transfer and laging

Here is my setup in my CCR1009-7G-1C-1S+. The problem is that users behind Lan bridge experiencing unstable data download and upload. Sometimes the users test bandwidth and get 15Mbs and sometime get 3Mbs. Please note that 1) at the time that users report the problem total bandwidth through WAN1-3 i...
by ne30n2
Tue Jul 11, 2017 8:10 am
Forum: Scripting
Topic: Automatic kick previous active user from Mikrotik - userman
Replies: 2
Views: 1286

Automatic kick previous active user from Mikrotik - userman

I am currently have Mikrotik setup which I'm trying to remove duplicate login user. Then I found this script over the mikrotik forum. This script works perfectly for user added directly from Mikrotik hotspot, but not working for user added from Usermanager. Please help to make this working. I cannot...