Hello everyone, I am trying to set up a network between two Mikrotik wAP ac LTE kit routers using their ether1 ports via an LTE network. My mobile provider has issued postpaid SIM cards that don't have internet access but are pre-configured to create a LAN network. The first router (MT1) receives an...

Hi everyone, I'm new to this forum and currently facing an issue with configuring WireGuard to connect two MikroTik routers (hEX S, wAP ac LTE kit) over a DigitalOcean-hosted Ubuntu v24 server. Both routers are intended to operate within the same subnet (192.168.69.0/24). Despite spending several da...

Hi everyone, I'm new here. I am trying to access a web relay located in the LAN at work from a computer from home. The WEB server is accessed from the LAN: http://192.168.1.4/30000 (port80) Can I access it from the outside if my public IP address is 88.90.88.90? P.S. I managed to forward external po...

Quote: You have same lan addressing on MK1 and MK2. Best approach here would be changing MK2 LAN ip address range to e.g. 192.168.20.0/24. I need same subnet on both MK lan sides, because access controllers are on MT1 side and access controler menagement software is on MT2 side. Quote: What you have...

For accesing internet from my home im using cisco router trat is configured to work like modem, pass all trafic to my mikrotik router. Cable router/modem have dynamic wan addres and static ip 192.168.1.1. Mikrotik router have wan address 192.168.1.2 and lan is 192.168.10.1 , enabled dhcp in range 19...

Im succesfuly make a VPN network with same subnet on both sides (Main building and office) using PPtP tuneling protokol to connect two mikrotik-s and after successfuly conection im using EoIP bridged with LAN port. Configuration is like this: MK1 - Mikrotik RB750r2 (Main building) Internet <-> modem...

Dear Sirs, Im new in mikrotik. I use one mikrotik (MTK1) in purpose of PPTP VPN server, and succesfuli configure server. MTK1 on site1 (electric service): internet ->router DMZ all trafic to 192.168.1.2, (LAN=192.168.1.1) -> MTK1, WAN=192.168.1.2, LAN=192.168.10.1/24 -> switch -> PC with LAN=192.168...