Community discussions

Search found 296 matches

by martini
Mon Mar 31, 2014 11:56 pm
Forum: RouterBOARD hardware
Topic: CCR1036-8G-2S+ problem with Direct Attach Cable in SFP+ port
Replies: 15
Views: 3896

Re: CCR1036-8G-2S+ problem with Direct Attach Cable in SFP+

try this

[admin@felk-fw] /system leds print
[admin@felk-fw] /system leds set 1 disabled=no interface=te2 leds=eth1-led2 type=interface-speed
by martini
Fri Nov 30, 2012 8:26 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1015844

Re: CLOUD CORE ROUTER

oh no.. ))) Normis - i'll be waiting you in Kiev ) 8)
by martini
Fri Nov 30, 2012 1:23 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1015844

Re: CLOUD CORE ROUTER

Shit ..Can you just tell us performence of CCR in forwarding with firewall ??? !!!!!!!!! I dont need to compare x86 with x86 !! i know how much firewall rule can use core-i3 or core-i7 without performance degradation ! I just whant to know how many firewall rules i can use on CCR ! Why UBNT with Edg...
by martini
Sat Oct 27, 2012 9:40 pm
Forum: General
Topic: Displaying routes from a large routing table
Replies: 6
Views: 1168

Re: Displaying routes from a large routing table

He he )) Its a very old issue with ROS ) If you have route tables with more than 100k routes - its a nightmare to search route in table )) in winbox or in console .. I have border with 3 full bgp tables )) i prefer do not open routes in winbox ). And again - in linux or Freebsd, with quagga or bird ...
by martini
Mon Oct 22, 2012 10:05 pm
Forum: General
Topic: local proxy arp ?
Replies: 11
Views: 4454

Re: local proxy arp ?

mikrotik does not support this future, but you can try enable (you need a little hack to routeros). Some time ago i use this hack with sysctl on v4.x
The easiest way is to use bridge and bridge firewall future (work on any ROS version)
by martini
Fri Oct 05, 2012 6:17 pm
Forum: RouterBOARD hardware
Topic: So, ah, Cloud Core Router CCR1036 Shipping Date? Please...
Replies: 115
Views: 26925

Re: So, ah, Cloud Core Router CCR1036 Shipping Date? Please.

You can then take your RB1100AHx2, compare results with CCR (roughly 16 times difference) and you can multiply your current setup performance with 16 to get same CCR performance. A new RouterBOARD doesn't have special CPU features to accelerate Mangle more than Routing, therefore all speed is incre...
by martini
Fri Oct 05, 2012 2:35 pm
Forum: RouterBOARD hardware
Topic: So, ah, Cloud Core Router CCR1036 Shipping Date? Please...
Replies: 115
Views: 26925

Re: So, ah, Cloud Core Router CCR1036 Shipping Date? Please.

Dobby , i know about BSD, Carp, VRRP and others.. i dont need advice what to do whith my network )) It working goog and i prefer to use L3 switches , not routers (like doush said). but routers with LAG support are in normal conditions are at the price range of 5000 - 7500 € (Euro) what routers ?? Se...
by martini
Thu Oct 04, 2012 11:09 pm
Forum: RouterBOARD hardware
Topic: So, ah, Cloud Core Router CCR1036 Shipping Date? Please...
Replies: 115
Views: 26925

Re: So, ah, Cloud Core Router CCR1036 Shipping Date? Please.

2 dog - yes, RB750 its home router )

2 mrz - and what ?? Tell me how i can create in routeros 4000 queue rules, and create traffic priorities for each users ?? (www, mail,game,torrent). PCQ ? )) - no wuth PCQ you cant do that )
by martini
Thu Oct 04, 2012 4:03 pm
Forum: RouterBOARD hardware
Topic: So, ah, Cloud Core Router CCR1036 Shipping Date? Please...
Replies: 115
Views: 26925

Re: So, ah, Cloud Core Router CCR1036 Shipping Date? Please.

normis - we talk about that year or two ago ) 7000 customers, 4000 online, queue with traffic priorities for each customer (4 queue per customer), two direction (in and out) ~ 4000 x 4 x 2 = 32000 queue (now i use queue only for download, so 32000/2 ~ 16000 queue) I whant to buy Ericson Smartedge100...
by martini
Thu Oct 04, 2012 9:13 am
Forum: RouterBOARD hardware
Topic: So, ah, Cloud Core Router CCR1036 Shipping Date? Please...
Replies: 115
Views: 26925

Re: So, ah, Cloud Core Router CCR1036 Shipping Date? Please.

16000 simple queue (or mangle rules for PCQ)
on routeros i cant use 16000 simple queue ))) I tried to use 16000 mangle rules and PCQ - the same situation ))
But on linux i can use 16000 or even more with hash tables.
by martini
Wed Oct 03, 2012 10:57 pm
Forum: RouterBOARD hardware
Topic: So, ah, Cloud Core Router CCR1036 Shipping Date? Please...
Replies: 115
Views: 26925

Re: So, ah, Cloud Core Router CCR1036 Shipping Date? Please.

Hello Dobby ) I just need to aggregate some traffic, 2-6 Gbps, and drop unwanted ip or ports, and use shapers on it... And now tell me what i need ?? MX80 ?? or ASR1000 ? or CCR ? or PC + linux I think best way is PC + linux.. On my old 8 core xeon i use about 16000 queue rules, ~3-4 Gbps traffic (4...
by martini
Wed Oct 03, 2012 7:32 pm
Forum: RouterBOARD hardware
Topic: So, ah, Cloud Core Router CCR1036 Shipping Date? Please...
Replies: 115
Views: 26925

Re: So, ah, Cloud Core Router CCR1036 Shipping Date? Please.

ok )) And again PC with core i5-i7 + 4 port intel 82576 ethernet + gigabit switch - the best Router to handle 2-3-4 gigiabit per second with many firewall rules (not more than 100-150). And if i install on this PC linux or freebsd - i can use hash tables and more than 10000 firewall and queue rules....
by martini
Mon Oct 01, 2012 11:56 am
Forum: RouterBOARD hardware
Topic: So, ah, Cloud Core Router CCR1036 Shipping Date? Please...
Replies: 115
Views: 26925

Re: So, ah, Cloud Core Router CCR1036 Shipping Date? Please.

hello normis !!
Answer questions - CCR have ASIC ?? How many firewall rules i can use without throughput degradation in L3 ?? say something ))
by martini
Mon Oct 01, 2012 12:53 am
Forum: RouterBOARD hardware
Topic: So, ah, Cloud Core Router CCR1036 Shipping Date? Please...
Replies: 115
Views: 26925

Re: So, ah, Cloud Core Router CCR1036 Shipping Date? Please.

2 andriys - no, its not fastpath. All interfaces in bridge mode, so its only L2 ))
Fastpath in cisco not the same as mikrotik ))

Привет Харькову )
by martini
Sun Sep 30, 2012 10:46 pm
Forum: RouterBOARD hardware
Topic: So, ah, Cloud Core Router CCR1036 Shipping Date? Please...
Replies: 115
Views: 26925

Re: So, ah, Cloud Core Router CCR1036 Shipping Date? Please.

Hello Dobby, i just buy Juniper ex3200, and i see all specs on juniper web site (including pps, Mbps, and firewall rules), also you can find all specs on cisco site about cisco product, the same with Dlink. But many months we ask Mikrotik about CCR specs (especially about L3 throughput with firewall...
by martini
Sat Sep 29, 2012 8:28 am
Forum: RouterBOARD hardware
Topic: So, ah, Cloud Core Router CCR1036 Shipping Date? Please...
Replies: 115
Views: 26925

Re: So, ah, Cloud Core Router CCR1036 Shipping Date? Please.

ok, Normis, now show the router throughput in L3 with 20-40 rules of firewall !!!! Proove that CCR is more powerfull that ubnt EdgeMax !! ) We will definetly post some test results, but we can't compare, as we don't have that other device in our lab. Dont need to compare !! just make throughput in ...
by martini
Fri Sep 28, 2012 9:12 am
Forum: RouterBOARD hardware
Topic: So, ah, Cloud Core Router CCR1036 Shipping Date? Please...
Replies: 115
Views: 26925

Re: So, ah, Cloud Core Router CCR1036 Shipping Date? Please.

ok, Normis, now show the router throughput in L3 with 20-40 rules of firewall !!!!
Proove that CCR is more powerfull that ubnt EdgeMax !! )
by martini
Thu Aug 16, 2012 4:20 pm
Forum: General
Topic: Newsletter 41: NEW PRODUCTS!
Replies: 64
Views: 25328

Re: Newsletter 41 NEW PRODUCTS!

RB44Ge - ho ho ho )) Thats why you dont whant include normal driver for intel ethernet ))) Ok, some questions - can we turn on or of TCP\UDP offloading ? how many RX-TX queue per port support atheros chip ? atheros 8131 support Vlan tag offload ? can we manually change coalescing parameters ? can we...
by martini
Sun Jul 29, 2012 10:37 pm
Forum: RouterBOARD hardware
Topic: NEW PRODUCT - Cloud Core Router
Replies: 104
Views: 34100

Re: NEW PRODUCT - Cloud Core Router

netmaster - ??? in the first post i ask about ASIC, i know that without ASIC CCR its just another PC router. And i ask about firewall at wire speed .. not 1 MBps or 100 MBps. Any switch or router with ASIC can filter packets at wire speed, 1 or 10 or 100 GBps. What futures will have CCR in compare t...
by martini
Sun Jul 29, 2012 2:37 pm
Forum: RouterBOARD hardware
Topic: NEW PRODUCT - Cloud Core Router
Replies: 104
Views: 34100

Re: NEW PRODUCT - Cloud Core Router

netmaster - )) why you think that CCR is not for me ?? i need more than 5000 simple firewall rules ..
Mikrotik - tell more about CCR !!!!
by martini
Thu Jul 26, 2012 4:35 pm
Forum: RouterBOARD hardware
Topic: NEW PRODUCT - Cloud Core Router
Replies: 104
Views: 34100

Re: NEW PRODUCT - Cloud Core Router

2 omega-00 - i dont need nat, or L7 filter (for NAT i use linux, and for L7 i use cisco sce2020), from CCR i need only firewall for src-dst, protocols, ports... In juniper EX3200 i can add more than 10000 firewall rules without speed degradation (all rules install on TCAM memory in ASIC). If CCR use...
by martini
Wed Jul 25, 2012 2:56 pm
Forum: RouterBOARD hardware
Topic: NEW PRODUCT - Cloud Core Router
Replies: 104
Views: 34100

Re: NEW PRODUCT - Cloud Core Router

how many firewall rules we can add to cloud core router without performence degradation ?? (routing and bridge)
if this product dont have ASIC - how many firewall rules it can support ?? (not NAT, only firewall)

Normis - answer please )
by martini
Tue Jun 05, 2012 6:34 pm
Forum: General
Topic: Modern chipsets support (H77 Z77 X79) in ROS 6.x
Replies: 20
Views: 5117

Re: Modern chipsets support (H77 Z77 X79) in ROS 6.x

ROS v6 beta3 with new kernel and new Ethernet drivers ??? Especially for intel Ethernet ??
by martini
Fri Apr 27, 2012 2:07 pm
Forum: General
Topic: v6.0beta2 released!
Replies: 53
Views: 19327

Re: v6.0beta2 released!

sergejs - please - use the latest driver from intel !!! It add to ROS performance and low cpu load. And don't forget turn off LRO, GSO and TSO !! (or make possibilities to use functional of ETHTOOL)
by martini
Thu Apr 26, 2012 11:34 pm
Forum: General
Topic: v6.0beta2 released!
Replies: 53
Views: 19327

Re: v6.0beta2 released!

2 sergejs - yes, its specific option of ethernet card, but it wont work with mikrotik )) very very long time ) Tested on same hardware and same traffic throu 10 vlans - on ubuntu cpu load 5-10%? on mikrotik 50-60% and irq interrupt near 100% of cpu ) (intel 82576 chip and core-i5 cpu, each core mapp...
by martini
Wed Apr 25, 2012 10:31 pm
Forum: General
Topic: v6.0beta2 released!
Replies: 53
Views: 19327

Re: v6.0beta2 released!

what version of driver for intel nics use in v6 ?? Does it support vlan offload ?
is it possible to use the functional of ETHTOOL to disable or enable GSO, TSO, LRO , checksum tcp and udp ??
by martini
Sat Jan 21, 2012 12:07 am
Forum: Forwarding Protocols
Topic: IGMP Proxy issue
Replies: 60
Views: 28388

Re: IGMP Proxy issue

on igmp proxy server you need to add all streamer ip subnet to alternative subnet on igmp proxy settings.
All works ok, many my clients use it.
by martini
Mon Jan 16, 2012 5:28 pm
Forum: General
Topic: Issues with MTU>1504 bytes on Intel NICs like 82575EB
Replies: 22
Views: 5169

Re: Issues with MTU>1504 bytes on Intel NICs like 82575EB

just change ethernet from intel to Broadcom or marvell.
Mikrotik need a long time to compile new IGB driver in their kernel )))
by martini
Mon Dec 19, 2011 3:37 pm
Forum: General
Topic: Packet Shaping
Replies: 18
Views: 2770

Re: Packet Shaping

thanks normis, thats what i need )
by martini
Mon Dec 19, 2011 1:01 pm
Forum: General
Topic: Packet Shaping
Replies: 18
Views: 2770

Re: Packet Shaping

ok, 1 Mpps its from port 1 to port 2 ?? or what ? and what size of packet when test this ?
by martini
Mon Dec 19, 2011 10:20 am
Forum: General
Topic: Packet Shaping
Replies: 18
Views: 2770

Re: Packet Shaping

)) 1Mpps its summ of all PPS on interfaces. ~180000 x 13 ports ~= 2340000 pps
by martini
Sat Dec 17, 2011 4:55 pm
Forum: General
Topic: automation of ACL modification
Replies: 6
Views: 934

Re: automation of ACL modification

php-api + ftp ??
by martini
Sat Dec 17, 2011 12:28 am
Forum: General
Topic: Packet Shaping
Replies: 18
Views: 2770

Re: Packet Shaping

2 normis - new RB1100AHx2 can route 1 million pps at which packet size ? 64 or 1500 byte, and can i route this 1 million pps from one port to second ? no just sum pps of all ports
by martini
Fri Dec 16, 2011 1:23 am
Forum: General
Topic: Limit CPU usage
Replies: 14
Views: 1640

Re: Limit CPU usage

hmm.. you whant that router for 40$ work with full 5 gigabit ?? :D
by martini
Fri Dec 16, 2011 1:20 am
Forum: Wireless Networking
Topic: 802.1q Trunk extension over Wireless
Replies: 4
Views: 1344

Re: 802.1q Trunk extension over Wireless

if you know ethernet , maybe this help - Bridge in mikrotik its just a HUB (sending all to all)
by martini
Fri Dec 16, 2011 1:17 am
Forum: Wireless Networking
Topic: IPTV/VOIP over Mikrotik
Replies: 7
Views: 2439

Re: IPTV/VOIP over Mikrotik

IPTV (multicast) works fine over wireless, but...
on 100M wireless link with good signal we can push 5-7 SD channels without frame drops, or one HD channel but with bitrate less than 15-20M.
So, for one clent its good solution ).
by martini
Fri Dec 16, 2011 1:07 am
Forum: General
Topic: Add DHCP leases to address-list
Replies: 6
Views: 7051

Re: Add DHCP leases to address-list

work without problem many years, no problem with any version (x86)
Dynamically added lease with address-list
by martini
Thu Dec 15, 2011 9:49 pm
Forum: General
Topic: Future Request Lock Simple Queues
Replies: 6
Views: 1760

Re: Future Request Lock Simple Queues

in winbox - click on "#" icon in the left on queue window ))
its magic )

And thanks to mikrotik - now copy of item saved after this item !!! not in bottom of the list
by martini
Sun Dec 11, 2011 10:51 pm
Forum: General
Topic: slow Connection Tracking since 5.8
Replies: 6
Views: 992

Re: slow Connection Tracking since 5.8

different port has different speed )) its mikrotik feature :)
by martini
Mon Nov 14, 2011 6:27 pm
Forum: General
Topic: Interface packet Drops on an octacore xeon with intel nics
Replies: 31
Views: 14370

Re: Interface packet Drops on an octacore xeon with intel ni

martini, keep up the good work and troubleshooting on this issue. I see the same problems even on dual core boxes - lots of RX drops even though the hardware isnt loaded. Im wondering if its just poor kernel parameter tuning in ROS or something. on some routers (X86 with mikrotik) i change IRQ mapp...
by martini
Mon Nov 14, 2011 1:56 pm
Forum: General
Topic: Interface packet Drops on an octacore xeon with intel nics
Replies: 31
Views: 14370

Re: Interface packet Drops on an octacore xeon with intel ni

)) yes , i turn off RPS. NetworkPro - i know about IRQ, RPS, RFS, MSI-X ... Some years ago i create very intresting topic about MSI-X and IRQ support on intel Nics in mikrotik)), after that discussion mikrotik team included new intel driver in ROS. Distributor ID: Ubuntu Description: Ubuntu 11.10 Re...
by martini
Mon Nov 14, 2011 12:58 am
Forum: General
Topic: Interface packet Drops on an octacore xeon with intel nics
Replies: 31
Views: 14370

Re: Interface packet Drops on an octacore xeon with intel ni

1500 users going through this router, why this traffic cant utilising CPU for 1% ?? @shaper172:~# uptime 15:15:24 up 14 days, 14:16, 1 user, load average: 0.00, 0.01, 0.05 ---------------------------------- bwm-ng v0.6 (probing every 0.500s), press 'h' for help input: /proc/net/dev type: rate | ifac...
by martini
Sun Nov 13, 2011 11:34 pm
Forum: General
Topic: Interface packet Drops on an octacore xeon with intel nics
Replies: 31
Views: 14370

Re: Interface packet Drops on an octacore xeon with intel ni

Maybe you try to install linux ?? gentoo or ubuntu... On 8 core Xeon on mikrotik (2 Gb/s traffic, 600000 pps) without firewall and queue 15-20% cpu load. On same system and same traffic but with linux cpu load ~ 1% With firewall (8000 rules) and queue (queue tree 8000 rules) on mikrotik cpu load - 5...
by martini
Sat Oct 08, 2011 9:44 pm
Forum: General
Topic: limit all torrent downloads
Replies: 5
Views: 5043

Re: limit all torrent downloads

buy Cisco SCE - this solve all the problems with torrents and others ...
by martini
Wed Sep 21, 2011 5:33 pm
Forum: General
Topic: DHCP problem
Replies: 13
Views: 5031

Re: DHCP problem

привіт Львову ))
Всі настройки нормальні, спробуй з нуля настроїти ДХЦП, (видалити старі повністю) , на бета версії мені допомогало.
by martini
Tue Sep 20, 2011 10:18 pm
Forum: General
Topic: DHCP problem
Replies: 13
Views: 5031

Re: DHCP problem

do you have any ip address on dhcp vlan ?
by martini
Mon Sep 19, 2011 8:44 pm
Forum: General
Topic: DHCP problem
Replies: 13
Views: 5031

Re: DHCP problem

dhcp server configured on bridge interface ? or on interface that included in bridge ?
by martini
Mon Sep 19, 2011 3:30 pm
Forum: General
Topic: DHCP problem
Replies: 13
Views: 5031

Re: DHCP problem

are you use bridge ? post you dhcp config.
Its problem was in beta version, but in RC all ok, more than 300 DHCP servers works ok
by martini
Sat Sep 17, 2011 11:09 pm
Forum: General
Topic: Streaming from server through RB7450G
Replies: 4
Views: 946

Re: Streaming from server through RB7450G

dont use RB750 for multicast routing, better buy any L2 switch (Dlink or EdgeCore or Cisco..)
by martini
Fri Sep 16, 2011 10:38 pm
Forum: General
Topic: mikrotik kernel question
Replies: 5
Views: 755

Re: mikrotik kernel question

you can change that value, but why ?? 80k pps is not very high !! (you are using RB750 as router ??)
On x86 with Celeron CPU you can get more than 200k pps easy, on core2duo-AMD even much high... Maybe you need to change the router ?
by martini
Fri Sep 16, 2011 9:05 am
Forum: General
Topic: RouterOS v5.7 released
Replies: 227
Views: 67340

Re: RouterOS v5.7 released

How does one simple line can cause so much confusion? *) improved ipv4 forwarding performance on all boards with simple configuration by up to 30%; IPv4 forwarding (routing) throughput performance has been increased ~30%, most benefit (all 30%) you will see in configurations that do only routing - ...
by martini
Fri Aug 26, 2011 5:00 pm
Forum: General
Topic: Bridging EOIP-tunnnel Problem
Replies: 6
Views: 3372

Re: Bridging EOIP-tunnnel Problem

you need to bridge eoip tunnel interface with A interface on 2 , and eoip tunnel interface with D interface.
by martini
Sat Aug 20, 2011 9:49 am
Forum: Wireless Networking
Topic: SXT Point to Multi Point
Replies: 12
Views: 6811

Re: SXT Point to Multi Point

Mikrotik with l3 licence work great as AP for more than 15 clients, no need to upgrade licence level :D
by martini
Sun Aug 07, 2011 9:37 am
Forum: General
Topic: VLANs - mixed Cisco/Mikrotik
Replies: 6
Views: 3480

Re: VLANs - mixed Cisco/Mikrotik

use transparent bridge on all rb750 and rb433, and configure STP (rstp) on routers and switches (for backup), its much simply than use many vlans in your schema. [sarcasm] Right! Because separating traffic at layer 2 is such a bad idea. [/sarcasm] )) and you dont know how to setup Vlan , gvrp, vtp ...
by martini
Tue Aug 02, 2011 6:21 pm
Forum: General
Topic: VLANs - mixed Cisco/Mikrotik
Replies: 6
Views: 3480

Re: VLANs - mixed Cisco/Mikrotik

use transparent bridge on all rb750 and rb433, and configure STP (rstp) on routers and switches (for backup), its much simply than use many vlans in your schema.
by martini
Tue Aug 02, 2011 6:10 pm
Forum: General
Topic: VLAN Trunking on RB1200
Replies: 2
Views: 917

Re: VLAN Trunking on RB1200

[admin@RB1200] /interface bridge> filter add mac-protocol=vlan vlan-id=1200 in-interface=ether1 action=accept chain=input [admin@RB1200] /interface bridge> filter add mac-protocol=vlan vlan-id=1201 in-interface=ether1 action=accept chain=input [admin@RB1200] /interface bridge> filter add mac-protoco...
by martini
Sun Jun 19, 2011 8:25 am
Forum: Wireless Networking
Topic: Planning 83km PTP 5.8Ghz backhaul link.
Replies: 13
Views: 3723

Re: Planning 83km PTP 5.8Ghz backhaul link.

Airmax Dish is dual-pol antenna, and its much better than JRC on long distance link
by martini
Sat Jun 18, 2011 12:02 am
Forum: General
Topic: PCQ, high ping
Replies: 44
Views: 12627

Re: PCQ, high ping

you cannot create priority rule in PCQ substream, you only can create priority rule to Parent queue that have PCQ inside.
by martini
Thu Jun 16, 2011 4:49 pm
Forum: General
Topic: PCQ, high ping
Replies: 44
Views: 12627

Re: PCQ, high ping

priority in PCQ not work, only in simple queue or queue tree without PCQ classifier.
by martini
Tue Jun 14, 2011 11:18 pm
Forum: General
Topic: high irq usage how to fix
Replies: 4
Views: 2422

Re: high irq usage how to fix

set the irq to different number of proccesor (from 0 to 7), change the "auto" to number of cpu on ethernet interfacec and tx-rx queue
by martini
Sat Jun 11, 2011 10:48 am
Forum: General
Topic: Mikrotik router record !!!
Replies: 22
Views: 9994

Re: Mikrotik router record !!!

2 bda - port flapping on swich, thats why tx drops.
system specs -
AMD Phenom II X6 Black 1100T
Intel 82576 2 port ethernet
by martini
Wed Mar 16, 2011 1:15 pm
Forum: RouterBOARD hardware
Topic: RB1200 more information
Replies: 24
Views: 11179

Re: RB1200 more information

yes, i see this file , but didnt find answers fo my questions 1, 3, 4, 5
by martini
Tue Mar 15, 2011 5:50 pm
Forum: RouterBOARD hardware
Topic: RB1200 more information
Replies: 24
Views: 11179

RB1200 more information

1 - One core or Dual core system ?
2 - XFP, CX4, SFP or only 10GBASE-T
3 - routing performance ? pps performance.
4 - maybe TCAM for hardware firewall or routing ?? )
5 - price ???
by martini
Mon Mar 14, 2011 12:42 am
Forum: General
Topic: MAC format PPPOE
Replies: 1
Views: 410

Re: MAC format PPPOE

its not possible, change mac format in radius or mysql
by martini
Thu Mar 03, 2011 8:38 pm
Forum: General
Topic: 10,000 users / # mk
Replies: 20
Views: 1834

Re: 10,000 users / # mk

~6000 users, 8 PC mikrotik routers, 3 Border mikrotik routers, Juniper EX4200 L3 switch, 3 Dlink DGS3426 with 10G uplink switch, 10G internet uplink + 2x1G internet uplinks.
2 inibir - now you see what you need for your users..
by martini
Thu Mar 03, 2011 8:32 pm
Forum: General
Topic: PPPoE Server CPU Optimizing
Replies: 3
Views: 1132

Re: PPPoE Server CPU Optimizing

use PC server for PPPoE, core2duo or core2quad with intel ethernet
by martini
Sun Feb 27, 2011 2:22 pm
Forum: General
Topic: Power router 732 is hanging frequently
Replies: 3
Views: 1305

Re: Power router 732 is hanging frequently

intresting, gmsmstr say that powerouter is ideal hardware for mikrotik )) it even better that brand servers like hp, or dell or supermicro )). But as you see all mikrotik bug do not depend on servers, you can make you own server from ebay hardware or buy Supermicro server or buy powerouter - but in ...
by martini
Sun Feb 27, 2011 12:24 am
Forum: General
Topic: Mikrotik router record !!!
Replies: 22
Views: 9994

Mikrotik router record !!!

Mikrotik router on AMD Phenom 1090T (6 core), 3.6 Ghz with 2 port intel 82576 ethernet. I run 7 udp bandwidth tests from this router to 7 other router with udp size packet=150 , after some time router show incredible numbers )) (conntrack enabled, no firewall rules exept 1 nat rule) 640000 pps !!! M...
by martini
Sun Feb 27, 2011 12:02 am
Forum: General
Topic: degradation of throughput with firewall...
Replies: 13
Views: 3333

Re: degradation of throughput whith firewall...

its me again )) another my test show intresting results : Core i7 (4 core, 2.8 ghz), 1200-1400 mb total throughtput thrue router interfaces (4 eth on i82576, 1 eth per 1 core), cpu load 25-35% - than i create 600 filter rules.. and traffic decrease to 50-150 mb and cpu load still 30-45% (per core cp...
by martini
Sat Feb 26, 2011 12:38 am
Forum: Wireless Networking
Topic: IPTv over wireless
Replies: 2
Views: 985

Re: IPTv over wireless

I have many links with this setup, from 1 to 10km, iptv works ok, even HDTV channel (20-30 mb)
by martini
Thu Feb 17, 2011 11:50 pm
Forum: General
Topic: Настройка списка входящих пакетов по странам
Replies: 4
Views: 1150

Re: Настройка списка входящих пакетов по странам

без проблем, закидываешь в address-list айпишники всех стран и все )
by martini
Mon Feb 14, 2011 7:13 pm
Forum: General
Topic: CPU Load
Replies: 10
Views: 4381

Re: CPU Load

try this command /ip firewall connection tracking set enabled=no You can disable tracking because you not use nat, after that cpu load decrease. I have big RX and TX drops on intel nics and xeon/core CPU on early v5 beta, after installing RC - all works without any drops. Most stable for me rc5 and ...
by martini
Sun Feb 13, 2011 8:23 pm
Forum: General
Topic: CPU Load
Replies: 10
Views: 4381

Re: CPU Load

and now show your firewall.
do you have nat enabled on this router ?
by martini
Sat Feb 12, 2011 10:56 pm
Forum: General
Topic: CPU Load
Replies: 10
Views: 4381

Re: CPU Load

/tool profile
by martini
Fri Feb 11, 2011 10:54 pm
Forum: General
Topic: several interface problems on 5.0rc8 + intel Core i5+H67
Replies: 32
Views: 5888

Re: several interface problems on 5.0rc8 + intel Core i5+H67

Поэтому - не наступайте на мои грабли - Юзайте 4.16 и железо, которое его поддерживает. ага, и при трафике в 1 гигабит 4.16 версия загнется уже на 300 мегабитах.. Может всетаки ковыряние в биосе даст результат. Нужно попробовать разные варианты.. загибается? а что такого появилось в 5.0 от чего не ...
by martini
Mon Feb 07, 2011 7:45 pm
Forum: General
Topic: several interface problems on 5.0rc8 + intel Core i5+H67
Replies: 32
Views: 5888

Re: several interface problems on 5.0rc8 + intel Core i5+H67

Поэтому - не наступайте на мои грабли - Юзайте 4.16 и железо, которое его поддерживает.
ага, и при трафике в 1 гигабит 4.16 версия загнется уже на 300 мегабитах.. Может всетаки ковыряние в биосе даст результат. Нужно попробовать разные варианты..
by martini
Sun Feb 06, 2011 11:34 pm
Forum: General
Topic: several interface problems on 5.0rc8 + intel Core i5+H67
Replies: 32
Views: 5888

Re: several interface problems on 5.0rc8 + intel Core i5+H67

хмм.. а не пробовал в биосе отключить встроенную сетевую ?? или она нужна тебе ?
by martini
Sun Feb 06, 2011 6:24 pm
Forum: General
Topic: several interface problems on 5.0rc8 + intel Core i5+H67
Replies: 32
Views: 5888

Re: several interface problems on 5.0rc8 + intel Core i5+H67

а чем тебя 7-я и 5-я RC версии не устраивают ?? там все теже драйвера, но работают они месяцами без проблем
by martini
Sat Feb 05, 2011 11:11 pm
Forum: General
Topic: several interface problems on 5.0rc8 + intel Core i5+H67
Replies: 32
Views: 5888

Re: several interface problems on 5.0rc8 + intel Core i5+H67

а так же не стоит юзать последнюю бету, на ней багов уйма.
by martini
Thu Jan 27, 2011 10:59 am
Forum: General
Topic: FreeRadius+Mikrotik+Option 82
Replies: 11
Views: 8871

Re: FreeRadius+Mikrotik+Option 82

working without problem with freeradius and option82, but need some triggers in mysql to convert asci and other binary characters.
by martini
Wed Jan 19, 2011 6:32 pm
Forum: General
Topic: 10Gbit ethernet wire speed filter
Replies: 0
Views: 871

10Gbit ethernet wire speed filter

Whant to ask about implementation of Intel flow director technology with intel 82599 chip. When driver compiled and loaded with Flow Director - we can use up to 32000 hardware filtrers with 0% CPU load !!!!! In linux we need just add needed rules to /proc/net/pf_ring/dev section Very good descriptio...
by martini
Mon Jan 17, 2011 11:24 pm
Forum: Wireless Networking
Topic: Success Report 70mbps rb411ah
Replies: 8
Views: 1553

Re: Success Report 70mbps rb411ah

its normal results with very good signals
This is all short range approximately 1 sq km
So , you can repeat this instalation easy.
by martini
Mon Jan 17, 2011 11:18 pm
Forum: General
Topic: mikrotik attack?
Replies: 3
Views: 913

Re: mikrotik attack?

ssh bruteforce attack, close ssh port or use firewall or change port number
by martini
Mon Jan 17, 2011 11:17 pm
Forum: General
Topic: Which Intel NIC for x86 ?
Replies: 2
Views: 973

Re: Which Intel NIC for x86 ?

ethernet card based on intel 82576 chipset or higher
by martini
Sun Jan 16, 2011 10:17 pm
Forum: General
Topic: 10G compatibility/performance with Mikrotik?
Replies: 81
Views: 17215

Re: 10G compatibility/performance with Mikrotik?

one more question - how many filter rules in chain forward and mangle ? do you use nat and enabled coonn-track ?
by martini
Sun Jan 16, 2011 7:40 pm
Forum: General
Topic: 10G compatibility/performance with Mikrotik?
Replies: 81
Views: 17215

Re: 10G compatibility/performance with Mikrotik?

set different IRQ for ethernet you can only in version 5.xx
What ethernet card you use ?? and what type of bonding ?
by martini
Sat Jan 15, 2011 7:00 pm
Forum: General
Topic: degradation of throughput with firewall...
Replies: 13
Views: 3333

Re: degradation of throughput whith firewall...

2 Chupaka - yes, i run profile when testing firewall, most cpu load task - ethernet and firewall
by martini
Fri Jan 14, 2011 8:44 pm
Forum: General
Topic: degradation of throughput with firewall...
Replies: 13
Views: 3333

Re: degradation of throughput whith firewall...

)) i run this experiment in many situation. With disabled conn-track CPU load not drop down (30-35% like with conn-track enabled). So i think that firewall use only one core. Remember ROS version 4.xx, on two core processors had max CPU load was 40-50% (half from two core) and on 4 processors has 25...
by martini
Fri Jan 14, 2011 5:59 pm
Forum: General
Topic: degradation of throughput with firewall...
Replies: 13
Views: 3333

Re: degradation of throughput whith firewall...

300 or 500 or 1000 rule, i test how much firewall rules i can use on routeros without degradation of traffic. Maximum 250-300 rules.
by martini
Fri Jan 14, 2011 2:33 pm
Forum: General
Topic: degradation of throughput with firewall...
Replies: 13
Views: 3333

Re: degradation of throughput whith firewall...

2 zlyZwierz - if you read my posts again - you see that i use firewall rule with address-list and without them.
by martini
Fri Jan 14, 2011 1:14 pm
Forum: General
Topic: degradation of throughput with firewall...
Replies: 13
Views: 3333

Re: degradation of throughput whith firewall...

its simple rule
/ip firewall filter add dst-address=x.x.x.x action=accept chain=forward
its rule repeat 300 times with different ip or address list
i try to use interface in and out, and dst-address-list, and dont see any changes
ROS version 5.0rc5
by martini
Fri Jan 14, 2011 12:52 pm
Forum: General
Topic: degradation of throughput with firewall...
Replies: 13
Views: 3333

degradation of throughput with firewall...

Make some tests with ROS - Hardware - core-i7 (2.8 ghz 4 core), ethernet - 4 port intel 82576 Traffic on ethernet ~ 200 megabits. CPU load 10-15% Than i make 500 firewall rule in forward chain for random IP and see degradation of throughput about 2 time !! ) after apply firewall rule traffic on ethe...
by martini
Wed Jan 05, 2011 11:37 am
Forum: General
Topic: Firewall and NAT
Replies: 5
Views: 675

Re: Firewall and NAT

add mac-address to static arp list on interface and set mode of interface reply-only. In firewall you cant add more than 1 mac in one rule.
by martini
Sat Jan 01, 2011 4:33 pm
Forum: General
Topic: Best Cpu for RouterOS x86.
Replies: 21
Views: 17962

Re: Best Cpu for RouterOS x86.

I suggest you to use more than one server for 10k customers.
On software BRAS only Freebsd with kernel tuning can work with 4-5k concurent sessions. Thats why you need to use 4-5 Xeon/Core-i7 (with Mikrotik OS) servers or hardware BRAS like Ericsson SmartEdge or Redback or Juniper or Cisco
by martini
Fri Dec 31, 2010 5:25 pm
Forum: General
Topic: Mikrotik on x86 systems
Replies: 1
Views: 447

Re: Mikrotik on x86 systems

by martini
Fri Dec 31, 2010 5:25 pm
Forum: General
Topic: Best Cpu for RouterOS x86.
Replies: 21
Views: 17962

Re: Best Cpu for RouterOS x86.

I make them myself )) motherboard with 3 PCI-Ex slot and two 4-port ethernet and one 2-port ehernet ))
by martini
Fri Dec 24, 2010 5:22 pm
Forum: General
Topic: Simple queues and core router
Replies: 2
Views: 406

Re: Simple queues and core router

only PCQ will help you, and use different router for NAT and BGP with routing
by martini
Wed Dec 22, 2010 11:11 am
Forum: General
Topic: Best Cpu for RouterOS x86.
Replies: 21
Views: 17962

Re: Best Cpu for RouterOS x86.

Core i7-930, 1.5 gbps traffic, 30% CPU load
Core i5-760, 1.5 gbps traffic, 45% CPU load
Dual Quad Xeon 5506 (total 8 core), 3+ gbps traffic, 30% CPU load (10 ethernet interfaceson router)
Core 2 Duo 2600 MHZ, 400-800 mbps, 40-50% CPU load

All routers have intel ET ethernet dual or quad port (i82576)
by martini
Sat Dec 04, 2010 8:26 pm
Forum: General
Topic: Mikrotik Performance at Its Best
Replies: 12
Views: 1928

Re: Mikrotik Performance at Its Best

2 ggr4y - hp proliant G3 use old Xeon processor with low cache and low bus speed, upgrade you router ! 2 brianchrist - Intel xeon 5320 x2 + 12 ethernet interfaces (intel 82576 and 82571) and 1000-1200 simple queue and 400-700 MB internet traffic, CPU load 25-35% on version 5rc5. Just use normal hard...
by martini
Tue Nov 23, 2010 8:42 pm
Forum: General
Topic: Two problems with shaper in 5.0RC4
Replies: 19
Views: 2551

Re: Two problems witch shaper in 5.0RC4

normis - you dont understand, question not about 2600 queue (i have shaper with 5120 queue), question about problem with showing a lot of stuff in winbox... Have the same problem with interfaces or dhcp-leases, winbox not show all items, but in bottom i can see - "173 of 962 items" - it show only 17...
by martini
Wed Nov 10, 2010 7:09 pm
Forum: Wireless Networking
Topic: One AP two frequencies are viewed
Replies: 3
Views: 846

Re: One AP two frequencies are viewed

its shifted frequency, if you set scan-list on client to "default" you see only 2412
by martini
Sun Nov 07, 2010 10:54 pm
Forum: General
Topic: Support for intel 82576 chipset
Replies: 19
Views: 3891

Re: Support for intel 82576 chipset

version 5.x use IGB intel driver
by martini
Tue Nov 02, 2010 5:19 pm
Forum: General
Topic: MK v5 rc3 x86 - bug torch
Replies: 8
Views: 3030

Re: MK v5 rc3 x86 - bug torch

its bug from RC2, torch get data after queue and dont show traffic.
by martini
Fri Oct 29, 2010 3:14 pm
Forum: General
Topic: RouterOS v5 RC2
Replies: 91
Views: 14937

Re: RouterOS v5 RC2

by martini
Fri Oct 29, 2010 12:20 pm
Forum: General
Topic: RouterOS v5 RC2
Replies: 91
Views: 14937

Re: RouterOS v5 RC2

fixed issue with torch and intel ethernet, but now if i enable QUEUE i cant see TX traffic on interface )) because queue catch traffic before torch )) and if i disable queue i can see all traffic )
by martini
Sun Oct 24, 2010 11:28 pm
Forum: General
Topic: Intel Atom D525
Replies: 12
Views: 7959

Re: Intel Atom D525

and now try this test with UDP and packet size 500 )))
by martini
Tue Oct 12, 2010 12:29 am
Forum: General
Topic: Problem to boot: "Loading E"
Replies: 6
Views: 1134

Re: Problem to boot: "Loading E"

Try to disable or enable option LBA on HDD in bios
by martini
Wed Sep 22, 2010 1:44 pm
Forum: General
Topic: RouterOS v5 RC1
Replies: 82
Views: 18643

Re: RouterOS v5 RC1

its not a shaper queue, i mean ethernet hardware queue on intel chip 82576 or 82575
Shaper queue (simple queue or queue tree) works fine on v5RC1, tested on 1300 simple queue and queue tree
by martini
Tue Sep 21, 2010 10:34 am
Forum: General
Topic: RouterOS v5 RC1
Replies: 82
Views: 18643

Re: RouterOS v5 RC1

RPS help on high load ethernet links, it does not irrelevant to connection tracking.
And another bug - on x86 multicore cpu and intel ethernet with many queue when run "profile" - router reboot. Already send supout
by martini
Tue Sep 21, 2010 9:46 am
Forum: General
Topic: RouterOS v5 RC1
Replies: 82
Views: 18643

Re: RouterOS v5 RC1

mangle and queue works fine on x86, no more problem with queue tree, found some bug with RPS - recomended to disable RPS in this version. Supout send to support.
And RC1 still has bug with torch on intel ethernet.
by martini
Fri Sep 03, 2010 8:42 am
Forum: General
Topic: Support for intel 82576 chipset
Replies: 19
Views: 3891

Re: Support for intel 82576 chipset

its testing package, mikrotik send it to me to test 82576 ethernet with queue tree, soon you will be able to download beta7
by martini
Thu Sep 02, 2010 8:33 pm
Forum: General
Topic: Number of concurent sessions for power router 2242
Replies: 17
Views: 2878

Re: Number of concurent sessions for power router 2242

yes, if on router will be only forwarding, without queue, firewall, bgp... i can say that powerrouter 2282 can manage 30000 users without problem. But with queue and firewall - its hard to belive that 2282 can manage 5000 users without problems. And yes - # of users is not benchmark, but number of u...
by martini
Thu Sep 02, 2010 8:27 pm
Forum: General
Topic: Support for intel 82576 chipset
Replies: 19
Views: 3891

Re: Support for intel 82576 chipset

beta7 support 82576 without problems, also queue tree on this version work stable
by martini
Thu Sep 02, 2010 12:27 am
Forum: General
Topic: Number of concurent sessions for power router 2242
Replies: 17
Views: 2878

Re: Number of concurent sessions for power router 2242

2 gmsmstr - i can give you access to this router and you see that CPU load. This server don't have IRQ issue and config issue. I have more than 20 powerful router, from C2D cpu to Xeon 5504 (2 Xeon cpu on Supermicro Server) and i know what software future eat more hardware resources. And believe me,...
by martini
Wed Aug 25, 2010 7:22 pm
Forum: General
Topic: Number of concurent sessions for power router 2242
Replies: 17
Views: 2878

Re: Number of concurent sessions for power router 2242

4500 users kill powerrouter 2242. Save your money and buy one of HP or IBM servers with one or two Xeon 56xx If you dont need 14 Gigabit ethernet - you better buy HP or IBM. If you need pptp or ppoe autorization - you better buy 2 servers. In my network 1500 users with firewall and queue eat 30-50% ...
by martini
Fri Aug 13, 2010 9:32 pm
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36617

Re: Ros V5 beta new intel drivers

3 ethernet card i82575 works ok on different routers and on ros 5.02 and 5.06
by martini
Wed Aug 11, 2010 10:17 am
Forum: General
Topic: RouterOS v5 beta 6
Replies: 84
Views: 22899

Re: RouterOS v5 beta 6

2 normis - found that when i map every tx and rx ethernet queue (i82576) to processor core (disable automatic sharing) - queue start working, and global-in and global-out also working (multicore enabled)
by martini
Wed Aug 11, 2010 9:53 am
Forum: General
Topic: RouterOS v5 beta 6
Replies: 84
Views: 22899

Re: RouterOS v5 beta 6

QOS with enabled multicore
by martini
Wed Aug 11, 2010 9:39 am
Forum: General
Topic: RouterOS v5 beta 6
Replies: 84
Views: 22899

Re: RouterOS v5 beta 6

release date of RouterOS v5 beta7 with fixed i82576 problems ?????????????
by martini
Sun Aug 08, 2010 9:27 am
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36617

Re: Ros V5 beta new intel drivers

2 mangust - yes, but this magic command not need on heavy loaded routrer, because CPU load will be 100%. MSI need many cpu core, in other way you can use V4
by martini
Tue Aug 03, 2010 11:54 pm
Forum: General
Topic: IRQ sharing in x86
Replies: 7
Views: 1477

Re: To Normis

its support in v5 beta5
by martini
Thu Jul 29, 2010 3:54 pm
Forum: General
Topic: Installing Beta 5 on IBM Server e360 Series
Replies: 4
Views: 1390

Re: Installing Beta 5 on IBM Server e360 Series

use usb flash
by martini
Thu Jul 29, 2010 3:51 pm
Forum: General
Topic: RouterOs 5b5 memory leak
Replies: 10
Views: 1847

Re: RouterOs 5b5 memory leak

yes, installed on 5 x86 routers
by martini
Thu Jul 29, 2010 11:26 am
Forum: General
Topic: RouterOs 5b5 memory leak
Replies: 10
Views: 1847

Re: RouterOs 5b5 memory leak

router uptime 4 days, v5beta5 - no memory leak, traffic 400-800 Mbit, all works fine exept queue tree ))
by martini
Mon Jul 26, 2010 12:00 pm
Forum: General
Topic: RouterOS 5 beta 5
Replies: 22
Views: 6400

Re: RouterOS 5 beta 5

Ros v5beta5 - torch dont work correct (first 20-40 rows show full ointerface speed on each IP), and where you hide STOP button ??
by martini
Mon Jul 26, 2010 11:36 am
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36617

Re: Ros V5 beta new intel drivers

RoS V5beta5 still have issue with queue tree.
All problem with queue tree "global-in" parent, it seems that RoS cannot work with many rx queue on ethernet interface.. On "global-out" parent all works fine, because ethernet use only one tx queue.
by martini
Mon Jul 12, 2010 5:31 pm
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36617

Re: Ros V5 beta new intel drivers

on 5v beta4 queue on intel nics work better, if enable queue tree router just reboot, but dont kernel panic
by martini
Thu Jun 24, 2010 2:36 pm
Forum: General
Topic: MikroTik RouterOS version 5.0beta3 released!
Replies: 91
Views: 30772

Re: MikroTik RouterOS version 5.0beta3 released!

avantwireless - why you upgrade working routers for v5 beta?? test new version on test PC or router
by martini
Mon Jun 21, 2010 3:16 pm
Forum: General
Topic: проброс вланов.
Replies: 4
Views: 2636

Re: проброс вланов.

create bridge for each vlan.
Сделай бриджи для каждого Vlan, тоесть ксли у тебя 100 вланов, то сделай 100 бриджей, в каждом будет по два Влана, по одному с разных сторон
by martini
Mon Jun 21, 2010 11:24 am
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36617

Re: Ros V5 beta new intel drivers

and another problem - on intel nics simple queue and queue tree leds router to crash (kernel panic)
by martini
Mon Jun 21, 2010 11:17 am
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36617

Re: Ros V5 beta new intel drivers

ticket 2010061966000026 and 2010061966000017
by martini
Mon Jun 21, 2010 12:54 am
Forum: General
Topic: dst-nat not working quite as I'd expect it
Replies: 10
Views: 1179

Re: dst-nat not working quite as I'd expect it

leave only src-address-list match in firewall dst-nat rule
by martini
Sat Jun 19, 2010 10:12 am
Forum: General
Topic: Router OS 5.0beta3 - cannot connect winbox through IP
Replies: 3
Views: 1270

Re: Router OS 5.0beta3 - cannot connect winbox through IP

check you firewall or route, winbox to IP on v 5.3 works fine like all other version, tested on windows and linux
by martini
Sat Jun 19, 2010 1:02 am
Forum: General
Topic: MikroTik RouterOS version 5.0beta3 released!
Replies: 91
Views: 30772

Re: MikroTik RouterOS version 5.0beta3 released!

dont recommend to update production routers whith intel ethernet that has 4, 8 or 16 queue per port (82575 or 82576) to ROS V5 beta 3
Have some strange issue, but router still work. (supout.rif sent to support)
by martini
Sat Jun 19, 2010 1:01 am
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36617

Re: Ros V5 beta new intel drivers

dont recomment to update production routers with intel ethernet that has 4, 8 or 16 queue per port (82575 or 82576) to ROS V5 beta 3
Have some strange issue, but router still work. (supout.rif sent to support)
by martini
Fri Jun 18, 2010 6:16 pm
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36617

Re: Ros V5 beta new intel drivers

tomorrow post results of update
by martini
Fri Jun 18, 2010 4:57 pm
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36617

Re: Ros V5 beta new intel drivers

I cant belive in this !! ))) You did it !! ) MSI-X and IRQ balance support !
Normis and all mikrotik guys - thank you ! :D
by martini
Thu Jun 17, 2010 4:46 pm
Forum: General
Topic: Production router with ESXi ?
Replies: 8
Views: 2364

Re: Production router with ESXi ?

On ESX mikrotik work very good, 4 RoS VM on server, more than 300 megabit traffic, 40% cpu usage (core-i7)
by martini
Fri Jun 11, 2010 2:15 pm
Forum: General
Topic: Power Router 732 Spontanious Rebooting
Replies: 10
Views: 3114

Re: Power Router 732 Spontanious Rebooting

do you use simple queue for l2tp tunnel ?
by martini
Wed Jun 09, 2010 5:06 pm
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36617

Re: Ros V5 beta new intel drivers

hmm.. if MSI-X used in v5 beta - why i see only 'faste-io' interrupts used by ethernet card with cat /proc/interrupts ??
tested on 3 motherboard with intel E1G44ET and E1G42ET, and yes i did a little hack and use linux console to see what interrupts use ROS
by martini
Thu Jun 03, 2010 1:10 pm
Forum: General
Topic: how block connection of p2p?
Replies: 291
Views: 153707

Re: how block connection of p2p?

utorrent now use udp with its own protocol, and many p2p filters dont work - dont forget this.
by martini
Tue Jun 01, 2010 8:50 pm
Forum: General
Topic: [Suggestion] Distributed public IP pools
Replies: 4
Views: 1507

Re: [Suggestion] Distributed public IP pools

with public IP you cannot do this
by martini
Tue Jun 01, 2010 7:27 pm
Forum: General
Topic: RouterOS v4.10 released
Replies: 63
Views: 14644

Re: RouterOS v4.10 released

when will be released v5 beta with netflow v5 fix ???
by martini
Mon May 31, 2010 4:37 pm
Forum: General
Topic: RouterOS v4.10 released
Replies: 63
Views: 14644

Re: RouterOS v4.10 released

And many thanks for finally working netflow v5 from mee !! ))) :D
by martini
Thu May 27, 2010 5:25 pm
Forum: General
Topic: Many VLANs bug
Replies: 8
Views: 1846

Re: Many VLANs bug

terminating more than 5000 users, each user on its own Vlan
by martini
Thu May 27, 2010 5:24 pm
Forum: General
Topic: ROS on the Intel NIC support dropped?
Replies: 2
Views: 993

Re: ROS on the Intel NIC support dropped?

its worked, but on intel cards there are packet DROP, especially if on router configured many firewall rules, on Broadcom chip all works ok, "0" packet drop
by martini
Tue May 25, 2010 5:29 pm
Forum: General
Topic: RB 1100
Replies: 6
Views: 1414

Re: RB 1100

if your internet speed lower than 1 Gbps, than you better to buy mikrotik 44GV PCI 4-port Gigabit Ethernet card and install it on server
by martini
Mon May 24, 2010 9:30 pm
Forum: General
Topic: Two different queuing
Replies: 9
Views: 913

Re: Two different queuing

you may use mark packet (mark udp and tcp 53 port)and then create simple queue with this mark an unlimited bandwidth at top of your users queue
by martini
Mon May 24, 2010 9:14 pm
Forum: General
Topic: Does Mikrotik still run without Flash?
Replies: 6
Views: 717

Re: Does Mikrotik still run without Flash?

if you disconnect flash after booting - server will work , you need to disable write logs to HDD, but you cant conect to server throw winbox or ssh
by martini
Mon May 24, 2010 9:09 pm
Forum: General
Topic: Best VPN for WAN gaming?
Replies: 6
Views: 1570

Re: Best VPN for WAN gaming?

if you whant use game finding (in most cases it use udp broadcast) you better to use PPoE connection with bridge (if you cant use clear ethernet, or wireless, without pptp, l2tp, pppoe, etc..), but for wireless connection i dont recomend setup dedicated server for games or bridge interfaces, because...
by martini
Mon May 24, 2010 9:01 pm
Forum: General
Topic: RB 1100
Replies: 6
Views: 1414

Re: RB 1100

PPS on interfaces on PC SERVER (in time where lot of users online) Packet per second - in winbox, if you look on traffic graph in interface tab, you see Mbps on top and PPS on bottom. RB1000 or RB1100 you may use for you needs, but you current server more powerful than RB, why you whant to change s...
by martini
Mon May 24, 2010 6:07 pm
Forum: General
Topic: 'simple' queue question
Replies: 2
Views: 545

Re: 'simple' queue question

simple queue is more hard for router than queue tree. But if you have powerfull router (not Routerboard, even if its RB1100) you can use simple queue for each user IP. In my setup on quad 6600 cpu i have more than 3000 queue without degradation on latency or speed, but then i setup queue tree, beaco...
by martini
Mon May 24, 2010 6:02 pm
Forum: General
Topic: MacTelnet for linux?
Replies: 1
Views: 515

Re: MacTelnet for linux?

use Wine, winbox works fine from Wine emulation on many linux, also on MAC
by martini
Mon May 24, 2010 5:53 pm
Forum: General
Topic: RB 1100
Replies: 6
Views: 1414

Re: RB 1100

need much more information... Like : 1) speed of internet connection 2) users speed in tariffs 3) PPS on interfaces on PC SERVER (in time where lot of users online) 4) Current CPU load 5) Current Traffic on PC SERVER (in time where lot of users online) 6) Current version on ROS, how many nat rules a...
by martini
Mon May 24, 2010 12:33 am
Forum: General
Topic: Bandwidth Shaping in pppoe
Replies: 1
Views: 835

Re: Bandwidth Shaping in pppoe

multicast IPTV ??
by martini
Mon May 24, 2010 12:32 am
Forum: General
Topic: ping & "invalid value for argument address"
Replies: 7
Views: 10651

Re: ping & "invalid value for argument address"

[PPPoE7] > ping ipv7.google.com
invalid value for argument address
Its normal, mikrotik just cant find IP address for DNS name
by martini
Mon May 24, 2010 12:30 am
Forum: General
Topic: Many VLANs bug
Replies: 8
Views: 1846

Re: Many VLANs bug

its bug from early version 3.xx, if you have many vlan (> 1000) after reboot some vlan not running, its show in winbox, but without R flag. After disable and then enable those vlans - all works fine.
by martini
Sat May 22, 2010 1:22 am
Forum: General
Topic: Graph for each IP Block.
Replies: 3
Views: 653

Re: Graph for each IP Block.

use cacti or munin and graph counters for firewall on you IP block. ROS cant graph queue whith overlapping IP, it graph only first queue
by martini
Fri May 21, 2010 4:20 pm
Forum: General
Topic: General questions on RouterOS
Replies: 14
Views: 2124

Re: General questions on RouterOS

forget about RB1000-1100 for you network, no more than 150-200MBit whith little firewall. Use Core-i5-i7 based routers or Xeon 54x, 55x, 56x + Intel based ethernet. (Now on Core-i7 have 2 BGB full view uplink, ~ 400 Mbit traffic, heavy mangle chain, little forward chain , little nat chain, CPU load ...
by martini
Wed May 19, 2010 3:05 pm
Forum: General
Topic: Re: FTP Blocking
Replies: 39
Views: 3920

Re: FTP Blocking

Oooo ))) how many rules on you router ??
Move dst-nat rule on top of the firewall nat in winbox, and disable drop forward rule and Jump rule, than if all works - enable one by one rule and test )
by martini
Wed May 19, 2010 12:47 pm
Forum: General
Topic: Traffic flow bug
Replies: 33
Views: 9463

Re: Traffic flow bug

ok, whaiting new version
by martini
Tue May 18, 2010 4:29 pm
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36617

Re: Ros V5 beta new intel drivers

no, nothing changes, normis mean that v5 beta already have new drivers shipped with kernel, not new drivers from intel site
by martini
Tue May 18, 2010 4:27 pm
Forum: General
Topic: Traffic flow bug
Replies: 33
Views: 9463

Re: Traffic flow bug

finally !! )) waiting new version with fixed traffic-flow
by martini
Wed May 12, 2010 5:28 pm
Forum: General
Topic: tranfer license level 4 from rb133c to x86
Replies: 5
Views: 1042

Re: tranfer license level 4 from rb133c to x86

you must by a new licence
by martini
Mon May 10, 2010 12:49 pm
Forum: RouterBOARD hardware
Topic: RB750G tag and untag ports
Replies: 1
Views: 818

RB750G tag and untag ports

Hello, try to setup some simple configuration on RB750G : Port 2-5 in switch group Port 5 connect to PC and must be untagged, but on out port (port 3) it must be tagged with vlan-id 7 Port 3 connect to L2 switch and must be tagged. Try many config, rule and others.. but didnt work, on L2 switch i ca...
by martini
Sat May 08, 2010 8:47 pm
Forum: General
Topic: Address list from file
Replies: 8
Views: 4489

Re: Address list from file

my current address-list count 6879 ip subnet.
by martini
Sat May 08, 2010 10:16 am
Forum: General
Topic: When can support the x58 chip ?
Replies: 6
Views: 1608

Re: When can support the x58 chip ?

I am already use i7 and x58
by martini
Fri May 07, 2010 5:44 pm
Forum: General
Topic: Address list from file
Replies: 8
Views: 4489

Re: Address list from file

create text file which content string like this /ip firewall address-list add name="list name" address=x.x.x.a/y /ip firewall address-list add name="list name" address=x.x.x.b/y /ip firewall address-list add name="list name" address=x.x.x.c/y ......... .......... ........... And copy content of this...
by martini
Fri May 07, 2010 9:04 am
Forum: General
Topic: Isolating traffic between bridges
Replies: 5
Views: 739

Re: Isolating traffic between bridges

Then you need to use Vlan on routerboard and switch, make 2 vlan and bridge each of them with wireless interface.
And you problem solved )
by martini
Fri May 07, 2010 1:07 am
Forum: General
Topic: Isolating traffic between bridges
Replies: 5
Views: 739

Re: Isolating traffic between bridges

/interface bridge filter add action=drop chain=forward arp-src-mac-address=(customer mac) arp-dst-mac-address=(customer2 mac)

or create access rule for allowed mac to allowed mac and then add FROP rule for all other mac
by martini
Thu May 06, 2010 10:37 pm
Forum: General
Topic: Isolating traffic between bridges
Replies: 5
Views: 739

Re: Isolating traffic between bridges

use bridge firewall, disable mac forwarding (for customer mac)
by martini
Thu May 06, 2010 3:34 pm
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36617

Re: Ros V5 beta new intel drivers

try to run command - modinfo igb.ko On kernel driver for intel in ROS 3.X - 5.X (and on non ROS kernel same) it show none of parameter. But if you compile extended driver (from intel site) - modinfo show all parameters that i describe, and all will work. I have many i82575-82576 based cards installe...
by martini
Thu May 06, 2010 11:06 am
Forum: General
Topic: When can support the x58 chip ?
Replies: 6
Views: 1608

Re: When can support the x58 chip ?

ROS 4.x work with this chipsets but not recognize it.
ROS 5.x work with this chipsets and recognize it.
by martini
Thu May 06, 2010 10:57 am
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36617

Re: Ros V5 beta new intel drivers

Intel driver shipped with the all kernel have no parameter, and it use legasy function (fasteio), to use all functions you must download linux driver from intel site and compile it. Than you can use multiqueue, msi-x and other.. http://downloadcenter.intel.com/detail_desc.aspx?agr=Y&DwnldID=13663 th...
by martini
Sat May 01, 2010 2:36 am
Forum: General
Topic: Need routing help
Replies: 4
Views: 830

Re: Need routing help

Use separate subnets for the VPN connections i.e. 172.16.1.1/24 for the VPN and 172.16.2.1/24 for the LAN
Or use pptp bridge with proxy-arp
by martini
Fri Apr 30, 2010 6:13 pm
Forum: General
Topic: Radius NAS Identifier
Replies: 10
Views: 7380

Re: Radius NAS Identifier

/system identity set name=NAS-identity
by martini
Thu Apr 29, 2010 7:11 pm
Forum: General
Topic: Re: RouterOS v4.8 released
Replies: 37
Views: 6556

Re: RouterOS v4.8 released

493AH same problem, after power reboot work ok
by martini
Thu Apr 29, 2010 3:00 pm
Forum: General
Topic: Re: RouterOS v4.8 released
Replies: 37
Views: 6556

Re: RouterOS v4.8 released

dhcp server - show non-printable agent-circuit-id and agent-remote-id
values in hexadecimal notation (the same way as client-id is shown);
need this fix in v5.0 beta
by martini
Thu Apr 29, 2010 11:40 am
Forum: General
Topic: Re: RouterOS v4.8 released
Replies: 37
Views: 6556

Re: RouterOS v4.8 released

When you release v5 beta whith this changes ?? (dhcp fix)
by martini
Wed Apr 28, 2010 5:35 pm
Forum: General
Topic: is there any way to log NAT?
Replies: 20
Views: 12529

Re: is there any way to log NAT?

you need to use remote syslog server
by martini
Wed Apr 28, 2010 11:28 am
Forum: Scripting
Topic: Cant read file large then 4085 bytes
Replies: 9
Views: 3953

Cant read file large then 4085 bytes

Try to use this script :global content [/file get [/file find name=test.txt] contents] ; :global contentLen [ :len $content ] ; :global lineEnd 0; :global line ""; :global lastEnd 0; :do { :set lineEnd [:find $content "\r\n" $lastEnd ] ; :set line [:pick $content $lastEnd $lineEnd] ; :set lastEnd ( ...
by martini
Sun Apr 25, 2010 11:38 pm
Forum: General
Topic: Decision for src-addr in Masquerade?
Replies: 43
Views: 8909

Re: Decision for src-addr in Masquerade?

answer for my last question
by martini
Sun Apr 25, 2010 9:49 pm
Forum: General
Topic: PCQ queue with profile list problem
Replies: 14
Views: 2320

Re: PCQ queue with profile list problem

set mangle chain to prerouting when marking packet
by martini
Sat Apr 24, 2010 10:40 pm
Forum: General
Topic: PPPoE dialing frequency
Replies: 3
Views: 675

Re: PPPoE dialing frequency

PPPoE dont drop connection beacose it whait command from server, and after some timeouts it disconnects, you better use 'Netwatch' script , if you need to disconnect the session
by martini
Sat Apr 24, 2010 2:54 pm
Forum: General
Topic: PPPoE dialing frequency
Replies: 3
Views: 675

Re: PPPoE dialing frequency

even if you unplugged cable, pppoe client try to connect, if you plug it again pppoe conect to the server
by martini
Sat Apr 24, 2010 4:45 am
Forum: General
Topic: Multicore
Replies: 6
Views: 1062

Re: Multicore

Tested on ESX4 with i85476 and msi-x and multiqueue per ethernet port, work very good.
3 virtual router (5.0 beta), traffic 200-300 Mb/s
by martini
Fri Apr 23, 2010 10:54 pm
Forum: General
Topic: strange routing
Replies: 4
Views: 894

Re: strange routing

напиши по русски, ато мы три дня будем угадывать твою мысль )))
by martini
Fri Apr 23, 2010 10:49 pm
Forum: General
Topic: Decision for src-addr in Masquerade?
Replies: 43
Views: 8909

Re: Decision for src-addr in Masquerade?

tell me, does you PC (from what you connect to problem router) know where is 10.234.56.7 ? i meen route know ? Beacose you masquerade only to dst 10.234.56.7, bu dont masquerade 10.234.56.7 to other network including your PC. add new rule in nat /ip firewall nat add action=masquerade chain=srcnat co...
by martini
Fri Apr 23, 2010 5:33 pm
Forum: General
Topic: Decision for src-addr in Masquerade?
Replies: 43
Views: 8909

Re: Decision for src-addr in Masquerade?

/export ip route
/export ip address
/export ip firewall
after that we can see why its happens
by martini
Fri Apr 23, 2010 5:20 pm
Forum: General
Topic: Drop Gratuitous arp on bridge firewall
Replies: 4
Views: 1223

Re: Drop Gratuitous arp on bridge firewall

)) i think about that, but in ip firewall MT only have src-mac-address, but i need dst-mac-address (FF:FF:FF:FF:FF:FF)
by martini
Fri Apr 23, 2010 4:43 pm
Forum: General
Topic: Drop Gratuitous arp on bridge firewall
Replies: 4
Views: 1223

Re: Drop Gratuitous arp on bridge firewall

yes, i know that, but i need to drop about 1500 ip, if i can use address-list in bridge firewall - it would be very nice, but we can use address-list only in ip firewall.
by martini
Fri Apr 23, 2010 2:56 pm
Forum: General
Topic: PCQ queue with profile list problem
Replies: 14
Views: 2320

Re: PCQ queue with profile list problem

show config of the router
by martini
Fri Apr 23, 2010 1:10 pm
Forum: General
Topic: PCQ queue with profile list problem
Replies: 14
Views: 2320

Re: PCQ queue with profile list problem

show config of the router. And its slow speed only on pppoe clients ?
by martini
Fri Apr 23, 2010 12:07 pm
Forum: General
Topic: PCQ queue with profile list problem
Replies: 14
Views: 2320

Re: PCQ queue with profile list problem

20-30% on 4 core processor its almost 100 % load 1 core, beacose MT cant use all cores of processor. I have the same situation on some heavy loaded routers
by martini
Fri Apr 23, 2010 11:15 am
Forum: General
Topic: PCQ queue with profile list problem
Replies: 14
Views: 2320

Re: PCQ queue with profile list problem

what CPU load on your routers ??
by martini
Fri Apr 23, 2010 10:43 am
Forum: General
Topic: Radius DHCP Authenticaion
Replies: 7
Views: 1214

Re: Radius DHCP Authenticaion

create pool for untrusted users on MT and function on mysql that give untrusted users address from pool
by martini
Fri Apr 23, 2010 10:40 am
Forum: General
Topic: Decision for src-addr in Masquerade?
Replies: 43
Views: 8909

Re: OMFGWTF! NAT MASQ how is decision for src-addr made? v4.

You are right, i did not work with MT 10 years, only 7 years, and this NAT rule setup on my routers only 7 years (from version 2.7 to version 5.0) and on all version its works fine
by martini
Thu Apr 22, 2010 10:06 pm
Forum: General
Topic: Decision for src-addr in Masquerade?
Replies: 43
Views: 8909

Re: OMFGWTF! NAT MASQ how is decision for src-addr made? v4.

NetworkPro - i can sell to you working MASQ rule. (the similar rule work on many routers with no problem)
by martini
Thu Apr 22, 2010 10:02 pm
Forum: General
Topic: Problem DHCP Circuit-ID / Remote-ID in Docsis Environment
Replies: 16
Views: 6084

Re: Problem DHCP Circuit-ID / Remote-ID in Docsis Environmen

last week write 3 messages to support, but still get no answers ))
by martini
Thu Apr 22, 2010 2:07 pm
Forum: General
Topic: Drop Gratuitous arp on bridge firewall
Replies: 4
Views: 1223

Drop Gratuitous arp on bridge firewall

Hello all, help me to create firewall rule that drop Gratuitous arp.
by martini
Fri Apr 16, 2010 5:58 pm
Forum: General
Topic: RouterOS 5 beta
Replies: 97
Views: 18784

Re: RouterOS 5 beta

sell ??? )) ok, i can buy PCQ config for 1500000 euro-dollars-pounds )
by martini
Fri Apr 16, 2010 5:31 pm
Forum: Scripting
Topic: Script to read log
Replies: 4
Views: 2230

Re: Script to read log

i know this script, this line not working
:global currentTime [:totime [/log get [:pick $currentBuf($currentLineCount - 1)] time]];
RoS version 4.4, 4.5, 4.6, 5.1
by martini
Fri Apr 16, 2010 4:50 pm
Forum: General
Topic: RouterOS 5 beta
Replies: 97
Views: 18784

Re: RouterOS 5 beta

yes, send it to mee please, (martiniy at gmail.com)
by martini
Fri Apr 16, 2010 10:09 am
Forum: Scripting
Topic: Script to read log
Replies: 4
Views: 2230

Script to read log

Need some simple scrip to read log on ROS and print warning (IP address in log string ) if in log appers "user logged in, 10.1.1.1"

Script in wiki not working.
by martini
Fri Apr 16, 2010 10:02 am
Forum: General
Topic: RouterOS 5 beta
Replies: 97
Views: 18784

Re: RouterOS 5 beta

Hello NetworkPro, can you post your PCQ config on v5 beta ? or send me email "martiniy at gmail.com"
by martini
Thu Apr 15, 2010 11:22 pm
Forum: General
Topic: Stopping Broadcast Packets
Replies: 5
Views: 1209

Re: Stopping Broadcast Packets

in bridge firewall drop dst-mac ff:ff:ff:ff:ff:ff, but add static arp for hosts
by martini
Thu Apr 15, 2010 9:47 pm
Forum: General
Topic: Stopping Broadcast Packets
Replies: 5
Views: 1209

Re: Stopping Broadcast Packets

router setup ?? WDS with bridge or routing ?
by martini
Tue Apr 13, 2010 1:42 pm
Forum: General
Topic: RouterOS 5 beta
Replies: 97
Views: 18784

Re: RouterOS 5 beta

yes, PCQ counters are moving, and queue counters moving, but traffic does not shaping, but if i downgrade to 4.6 (without any other config change) - alll start to work
by martini
Tue Apr 13, 2010 11:21 am
Forum: General
Topic: RouterOS 5 beta
Replies: 97
Views: 18784

Re: RouterOS 5 beta

Anybody have working PCQ shaping on v5 beta ??
In setup with packet mark and PCQ traffic dont shaping, but if i choose any other queue type (ethernet default or wireless) - shaping start to work
by martini
Tue Apr 13, 2010 10:56 am
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36617

Re: Ros V5 beta new intel drivers

Thanks Chupaka )) After some research of RouterOS i found that forcedeth ethernet driver (Nvidia ethernet chip) have parameter that can enable MSI\MSI-X interrupts, but this module need to be insmod with parameters to enable MSI-X, it can be done via starting rc. scripts in RoS. Intel driver compile...
by martini
Mon Apr 12, 2010 2:21 pm
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36617

Re: Ros V5 beta new intel drivers

)) yes, my english is bad. I say that when i early create topic like this - no one need MSI-X and queue, beacose traffic speed in networks was less than 1 Gb/s and we dont have any trouble..
But now we all intresting that mikrotik use all network card futures !
by martini
Mon Apr 12, 2010 2:10 pm
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36617

Re: Ros V5 beta new intel drivers

I raise this question 2 or 3 times, but no one intresting it, beacose no one intresting router perfomence with traffic more than 1 Gb/s (in real network, not syntetic test). Normis - you can compile experimental package fo ROS, like Xen or wireless test, and if people need real perfomence thay can u...
by martini
Mon Apr 12, 2010 1:45 pm
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36617

Re: Ros V5 beta new intel drivers

For that time people dont have a big traffic, for now many of us have traffic more than 3-5 Gb/s. If you have 100 - 500 Mb/s traffic - than you dont need MSI-X and queue, but in other case you cant work without this. Thats why many vendors (like intel, broadcom) create drivers and chip that supports...
by martini
Fri Apr 09, 2010 11:11 pm
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36617

Re: Ros V5 beta new intel drivers

But why you dont want use MSI-X interrupts and more than 1 queue ?? Please explain.
And what mikrotik ethernet card have Gigabit speed ? I only see 100M card on the site.
RB1000 does not have enought power fo routing my traffic
by martini
Thu Apr 08, 2010 8:58 pm
Forum: General
Topic: RouterOS 5 beta
Replies: 97
Views: 18784

Re: RouterOS 5 beta

v5b1 WinBox: Remove the 1Gbps option from interfaces when the interface does not support it. Also, on RB450G, it was selected 100Mbits but the status showed 1Gbps. So this speed setting does nothing? Maybe its because Auto negotiation was turned on. But then it should be a fourth radio (circle with...
by martini
Thu Apr 08, 2010 7:03 pm
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36617

Re: Ros V5 beta new intel drivers

But why ??? more than one queue can increase router perfomence !!
And what is "our cards" RB816 ?
by martini
Wed Apr 07, 2010 2:01 pm
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36617

Re: Ros V5 beta new intel drivers

Hello Normis, now you understand our question ??? ))
by martini
Tue Apr 06, 2010 11:49 pm
Forum: General
Topic: Queues doesnt see upload traffic (possible bug ?)
Replies: 14
Views: 2181

Re: Queues doesnt see upload traffic (possible bug ?)

/queue export
by martini
Tue Apr 06, 2010 4:27 pm
Forum: General
Topic: RouterOS 5 beta
Replies: 97
Views: 18784

Re: RouterOS 5 beta

yes, netflow not fixed
by martini
Tue Apr 06, 2010 4:03 pm
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36617

Re: Ros V5 beta new intel drivers

Ok )) I have Intel 82576 Gigabit Network Controller which supports 8-receive queues per port. (2-port 1Gbps PCI-express package (E1G142ET)) This ethernet card works with MSI-X interrupts (MSI-X enables the Ethernet controller to direct interrupt messages to multiple processor cores), but in ROS V5 w...
by martini
Thu Apr 01, 2010 5:08 pm
Forum: General
Topic: Need command to see only enable users in pppoe
Replies: 3
Views: 572

Re: Need command to see only enable users in pppoe

/ppp active print where address=x.x.x.x

What PC you use as pppoe concentrator ? and what ethernet cards ?
by martini
Thu Apr 01, 2010 5:04 pm
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36617

Re: Ros V5 beta new intel drivers

Normis, can you answer for this question ?
by martini
Thu Apr 01, 2010 12:36 pm
Forum: General
Topic: Question about queues
Replies: 1
Views: 384

Re: Question about queues

1 name="Derick1" target-addresses=192.168.13.0/24 dst-address=192.168.0.122/32 interface=all parent=none direction=both priority=8 queue=default-small/default-small limit-at=1M/1M max-limit=1M/1M burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s total-queue=default-small 2 name="Derick2" target-a...
by martini
Thu Apr 01, 2010 10:02 am
Forum: General
Topic: Ros V5 beta new intel drivers
Replies: 109
Views: 36617

Ros V5 beta new intel drivers

In ros V5 we have new intel drivers (igb xxx), and i whant to know what parameters used in this drivers ??? If i use intel card with chipset 82576E (8 queue on rx and 8 queue on tx) how many queue per port use new driver ? and does its use MSI-X interrupts ? Can we see this information in Ros V5 bet...
by martini
Tue Mar 30, 2010 6:49 pm
Forum: General
Topic: IGMP support in RouterOS
Replies: 6
Views: 2166

Re: IGMP support in RouterOS

igmp works on ppoe interface, but on client side you need to use pppoe interface to receive multicast
by martini
Sun Mar 28, 2010 12:00 am
Forum: General
Topic: Dynamic queue in DHCp and Hotspot
Replies: 2
Views: 1604

Re: Dynamic queue in DHCp and Hotspot

thanks for the reply, you turn me on right way ))
by martini
Sat Mar 27, 2010 1:27 pm
Forum: General
Topic: Dynamic queue in DHCp and Hotspot
Replies: 2
Views: 1604

Dynamic queue in DHCp and Hotspot

When create dynamic queue in DHCP or Hotspot its show before static queue on the router (with item number 0 and static queue get number 1). But when create PPP dynamic queue its shown after static queue (static queue stay with number 0 and dynamic whill be 1, 2, 3...). Why in DHCP and Hotspot queue ...
by martini
Fri Mar 26, 2010 2:06 pm
Forum: General
Topic: Traffic flow bug
Replies: 33
Views: 9463

Re: Traffic flow bug

canot collect netflow export from cisco, but MK may install IPCAD or something else to generate normal netflow...
by martini
Fri Mar 26, 2010 12:21 pm
Forum: General
Topic: Traffic flow bug
Replies: 33
Views: 9463

Re: Traffic flow bug

Same bug with netflow V5, problem with sequence, any version 3.xx or 4.xx or 5beta.
When it will be fixed ????
by martini
Thu Mar 25, 2010 6:39 am
Forum: General
Topic: IGMP support in RouterOS
Replies: 6
Views: 2166

Re: IGMP support in RouterOS

RoS support igmp proxy on any interface
by martini
Tue Mar 23, 2010 1:52 am
Forum: General
Topic: ROS v5
Replies: 105
Views: 21454

Re: ROS v5

v5 works fine, no critical bug for me, but have one question for Mikrotik - why so long used Fasteio (you have new kernel and new IGB drivers) for the ethernet ?? (tested on intel 82576 and P55 chipset), why you dont use MSI/MSI-X ?? its much faster
by martini
Sun Mar 21, 2010 9:16 pm
Forum: General
Topic: ROS v5
Replies: 105
Views: 21454

Re: ROS v5

RoS V5 already support P45 chipset
by martini
Fri Mar 19, 2010 1:27 pm
Forum: General
Topic: ROS v5
Replies: 105
Views: 21454

Re: ROS v5

to Normis - i use x86 v5 on 4 routers, all works fine. Find some little bugs and sent report to support.
by martini
Fri Mar 19, 2010 1:25 pm
Forum: General
Topic: ROS v5
Replies: 105
Views: 21454

Re: ROS v5

Use netinstall 4.6 to install V5 beta
by martini
Fri Mar 19, 2010 9:10 am
Forum: General
Topic: ROS v5
Replies: 105
Views: 21454

Re: ROS v5

connect monitor to this frvice and see what happens when you copy V5 to this PC and then reboot, after you press reboot in winbox you see the installation progress and errors.
by martini
Thu Mar 18, 2010 10:55 pm
Forum: General
Topic: RouterOS on VMWare ESXi 3.5
Replies: 5
Views: 1016

Re: RouterOS on VMWare ESXi 3.5

works wery well on esxi 4.0
by martini
Wed Mar 17, 2010 11:12 pm
Forum: General
Topic: ROS v5
Replies: 105
Views: 21454

Re: ROS v5

seems any service (pptp, dhcp, pppoe) with radius not working on Ros V5 alpha.
Already sent supout and comments to support.
by martini
Tue Mar 16, 2010 9:17 pm
Forum: General
Topic: Bug limiting maximum VLANs capability
Replies: 1
Views: 455

Re: Bug limiting maximum VLANs capability

confirm this, only on 2.9 router can work whith 1000 vlans
by martini
Tue Mar 16, 2010 2:37 pm
Forum: General
Topic: ROS v5
Replies: 105
Views: 21454

Re: ROS v5

How can i get RoS v5 Beta for testing ?? )
by martini
Tue Mar 09, 2010 6:59 pm
Forum: General
Topic: DHCP radius COA
Replies: 2
Views: 916

Re: DHCP radius COA

The RADIUS dynamic-request server receives and processes the unsolicited CoA messages from RADIUS servers. The RADIUS-initiated CoA feature uses the following codes in its RADIUS request and response messages:

CoA-Request (43)
CoA-ACK (44)
CoA-NAK (45)

Hotspot works with radius COA
by martini
Mon Mar 08, 2010 9:52 pm
Forum: General
Topic: DHCP radius COA
Replies: 2
Views: 916

DHCP radius COA

If i use dhcp with radius server, can i use COA packet to change dynamic simple queue ??
If its work , what parameter i must send to radclient (mac or ip or session id) ??
by martini
Thu Mar 04, 2010 12:12 pm
Forum: General
Topic: Route Filter, OSPF, and PPPoE
Replies: 11
Views: 2985

Re: Route Filter, OSPF, and PPPoE

why you need ospf on pptp ????
if you whant that router dont send routes to neighbour - change the config like in my last post
by martini
Thu Mar 04, 2010 12:09 pm
Forum: General
Topic: Traffic counting
Replies: 3
Views: 537

Re: Traffic counting

snmp, firewall, queue, statistic on interface....
by martini
Thu Mar 04, 2010 9:26 am
Forum: General
Topic: Route Filter, OSPF, and PPPoE
Replies: 11
Views: 2985

Re: Route Filter, OSPF, and PPPoE

its always working. prefix=0.0.0.0/0 prefix-length= 32 must be (for RoS < 4.5) 0 chain=ospf-out prefix=0.0.0.0/0 prefix-length= 0-32 protocol=ospf invert-match=no action=discard set-disabled=no must be (for RoS > 4.5) 0 chain=ospf-out prefix=0.0.0.0/0 prefix-length= 0-128 protocol=ospf invert-match=...
by martini
Thu Feb 25, 2010 12:50 am
Forum: General
Topic: Network interface Rx Drops
Replies: 40
Views: 13089

Re: Network interface Rx Drops

Problem is onbord LAN and low bus speed. I see drop even on 8 core server with PCI-X intel Lan. When moved to Core-i5/i7 and PCI-Express Intel LAN drops are stopped. Before this have the same number of drops.. One more things - PCQ whith more than 100 pppoe users and traffic more than 200 Mbits dont...
by martini
Tue Feb 09, 2010 11:50 pm
Forum: General
Topic: HP PROLIANT DL360 G4
Replies: 3
Views: 940

Re: HP PROLIANT DL360 G4

USB work nice on this servers