Community discussions

Search found 118 matches

by mac86
Tue Sep 17, 2019 7:58 pm
Forum: RouterBOARD hardware
Topic: CCR1072 watchdog reboot
Replies: 125
Views: 17720

Re: CCR1072 watchdog reboot

can anyone confirm that version 6.44.5 is stable with the CCR1072?

Yes, I can confirm it.
4 weeks without reboots, and going on.....
by mac86
Tue Sep 17, 2019 4:51 pm
Forum: RouterBOARD hardware
Topic: CCR1072 watchdog reboot
Replies: 125
Views: 17720

Re: CCR1072 watchdog reboot

We've downgraded CCR1072 to 6.44.5 and no more reboots. :D
by mac86
Tue Jul 30, 2019 7:10 pm
Forum: Announcements
Topic: v6.45.2 [stable] is released!
Replies: 206
Views: 35743

Re: v6.45.2 [stable] is released!

I want to inform that we should also downgrade CCR1072.
With 6.45.1 we have an unexpected restart every day. :(

Simply lower CCR to 6.44.5 and no more bad reboots. :D
by mac86
Thu Mar 28, 2019 3:50 am
Forum: The Dude
Topic: Recovering the Dude after db corruption.
Replies: 5
Views: 1674

Re: Recovering the Dude after db corruption.

I've fixed my dude db with

https://wiki.mikrotik.com/wiki/Manual:T ... _db_repair

thank you!
by mac86
Sat Jan 12, 2019 10:39 pm
Forum: General
Topic: CCR1036-8G-2S+with HIGH CPU load
Replies: 9
Views: 847

Re: CCR1036-8G-2S+with HIGH CPU load

Are u doing too much nat or mangle?

Enviado desde mi Moto G (5) mediante Tapatalk

by mac86
Tue Jul 31, 2018 7:30 pm
Forum: General
Topic: balance-tlb for Wireless Links
Replies: 6
Views: 650

Re: balance-tlb for Wireless Links

no updates here ?....
by mac86
Sat Mar 24, 2018 8:27 pm
Forum: RouterBOARD hardware
Topic: CCR1072 watchdog reboot
Replies: 125
Views: 17720

Re: CCR1072 watchdog reboot

Could you find a fix? After 20 days my CCR rebooted out of the blue again... So it becoming stable after removing only 1 PSU was just coincidence. Put the PSU back in place, better to have it rebooting than risking it stopping. have you upgraded your hardware routerboard, with last RouterOs version...
by mac86
Wed Nov 29, 2017 11:55 pm
Forum: RouterBOARD hardware
Topic: CCR1072 watchdog reboot
Replies: 125
Views: 17720

Re: CCR1072 watchdog reboot

there is some update about this post ? I've a ccr 1072 and get watchdog reboot and kernel panic reboot this is about watchDog reboot nov/29/2017 10:35:40 system,error,critical router was rebooted without proper shutdown by watchdog timer and this is about kernel Failure reboot nov/28/2017 10:33:45 s...
by mac86
Fri Mar 31, 2017 1:19 am
Forum: Beginner Basics
Topic: New RB951G-2HnD bricked? [Solved with Netinstall]
Replies: 28
Views: 46960

Re: New RB951G-2HnD bricked? [Solved with Netinstall]

I just received MikroTik RB951Ui-2HnD from one of my friend to setup the hotspot with it. Well during my experiments (which included firmware upgrade to 6.33.5) somehow I bricked it. Google search landed me on this page. I tried everything mentioned here but my modem never picked up by netinstall.e...
by mac86
Tue Dec 13, 2016 4:21 pm
Forum: General
Topic: ChangeIp.com
Replies: 4
Views: 1213

Re: ChangeIp.com

Still fixing.... From: http://www.changeip.com/ Service Status Sunday 12/11/2016 at 1PM PT we experienced a database failure that cascaded through all of our redundant systems. At 2PM PT we started the process of restoring data from systems backup. Unfortunately due to the size of the database the r...
by mac86
Mon Dec 12, 2016 7:24 pm
Forum: General
Topic: ChangeIp.com
Replies: 4
Views: 1213

changeip.com is down?

Hi, seems like changeip.com is down?

We use changeIP in order to setup DDNS on many RouterOS devices.
by mac86
Thu Dec 01, 2016 3:20 am
Forum: General
Topic: Tool: Realtime per IP traffic monitor for home/office
Replies: 289
Views: 304854

Re: Tool: Realtime per IP traffic monitor for home/office

Very good work, Thank you !!!

It's possible to archive traffic history like PNRG ?

http://www.netpro-ar.com/monitoreo-de-t ... y-netflow/
by mac86
Fri Jul 29, 2016 6:24 pm
Forum: Scripting
Topic: Backup to External FTP Useful script
Replies: 9
Views: 35537

Re: Backup to External FTP Useful script

I modified the whole stuff a little bit, e.g. beautified the date-string to represent YYYY-MM-DD format and added an /export file to the backup so one gets a human readable format as well. The whole thing can be found at Automated RouterOS Backup to FTP in Harry's TechBlog. Thank you ZAP71 ...! Ver...
by mac86
Thu May 12, 2016 6:03 pm
Forum: General
Topic: RB1100 ahX2 Leds ETH1 to ETH10 up, and no link
Replies: 0
Views: 620

RB1100 ahX2 Leds ETH1 to ETH10 up, and no link

Hi...! I've a RB1100 ah X2, after a storm eth1 to eth10 can't link. How ever, eth11, eth12, and eth13 works OK I've upgraded routerboard firwmare to 3.24, and router OS to 6.35, but eth1 to eth10 fails and light up, see picture. http://s32.postimg.org/44fe4ng91/IMG_20160512_115937130_HDR.jpg How eve...
by mac86
Wed Dec 16, 2015 4:48 pm
Forum: General
Topic: v6.33.3 [current] is released!
Replies: 59
Views: 18798

Re: v6.33.3 [current] is released!

Hi!

there is a way to install npk file under Linux (using "wine") ?

I used to use wine to run dude 4.0b3 ".exe" file version.

how ever I can't find v6 ".exe" file.

many thanks.
by mac86
Tue May 19, 2015 2:01 am
Forum: General
Topic: IP traffic graph with NetFlow (IpFlow), Pmacct and Pnrg over Linux
Replies: 7
Views: 2630

Re: IP traffic graph with NetFlow (IpFlow), Pmacct and Pnrg over Linux

Would you mind sharing what you did to get the ELK system up and running?

Been playing a bit in the ELK arena lately - and would love to see netflows into elk

+1 :D
by mac86
Wed May 13, 2015 1:47 am
Forum: General
Topic: IP traffic graph with NetFlow (IpFlow), Pmacct and Pnrg over Linux
Replies: 7
Views: 2630

Re: IP traffic graph with NetFlow (IpFlow), Pmacct and Pnrg over Linux

look very good !!!

amazing work
Thank you very much!
by mac86
Thu May 07, 2015 7:43 am
Forum: General
Topic: IP traffic graph with NetFlow (IpFlow), Pmacct and Pnrg over Linux
Replies: 7
Views: 2630

IP traffic graph with NetFlow (IpFlow), Pmacct and Pnrg over Linux

Hi, Many times I was wondering how to graph IP traffic in / out from all hosts, like "Mrtg" http://oss.oetiker.ch/mrtg/ Some times I tried queue simple graph... other times tried by to active SNMP and use Cacti " http://www.cacti.net " or similar SNMP app This time I think I've found a very simple a...
by mac86
Wed Apr 08, 2015 5:54 pm
Forum: General
Topic: About Router OS Installation in x86
Replies: 2
Views: 904

Re: About Router OS Installation in x86

no updates yet?
by mac86
Fri Apr 25, 2014 11:40 pm
Forum: General
Topic: x86 v6.0 Mikrotik problem
Replies: 12
Views: 3163

Re: x86 v6.0 Mikrotik problem

Because it;s hard for devs to track every bug/problem through different users posts, it would be nice a bug tracking system.. Ok, if I put this issue in forum , maybe others users can report more info about this issue. BTW, I will try next week same configuration with a CCR instead a x86 Supermicro...
by mac86
Fri Apr 25, 2014 5:15 pm
Forum: General
Topic: x86 v6.0 Mikrotik problem
Replies: 12
Views: 3163

Re: x86 v6.0 Mikrotik problem

You didn;t get the point, if you want to make a problem/bug report then you have to mail the mikrotik team since this forum isn;t for reporting issues. why not? if you see all mikrotik forum you can check all users posts mikrotik issues, and share information with other users, in order to try to fi...
by mac86
Fri Apr 25, 2014 5:45 am
Forum: General
Topic: x86 v6.0 Mikrotik problem
Replies: 12
Views: 3163

Re: x86 v6.0 Mikrotik problem

Notice: For support from Mikrotik staff, write to support@mikrotik.com - Mikrotik does not generally offer support on the forum, this is a user forum I disagree. This forum is also to exchange experiences with other users Mikrotik. In this case x86 users. Of course, Mikrotik must post an update abo...
by mac86
Thu Apr 24, 2014 3:50 pm
Forum: General
Topic: x86 v6.0 Mikrotik problem
Replies: 12
Views: 3163

Re: x86 v6.0 Mikrotik problem

Hello, Today we decided to upgrade some custom mikrotik using supermicro mobo / E3-1230v2 xeon cpu / with (4) dual intel pro 1000 nics this server have always been < 10 % cpu usage this MT is 24/7 with 100k connections, 10k to 16k pps, 45 Mbps. As soon as we upgraded we noticed massive packet loss!...
by mac86
Thu Feb 20, 2014 12:29 am
Forum: General
Topic: ISP software: SequreISP
Replies: 2
Views: 1157

Re: ISP software: SequreISP

I don't like it.

because all your traffic must pass over Linux "squire isp" box
Then, you don't use a routerOs as core router.
by mac86
Tue Jul 09, 2013 5:05 am
Forum: RouterBOARD hardware
Topic: Failure of the R5SHpn radio cards
Replies: 3
Views: 1799

Re: Failure of the R5SHpn radio cards

I am having the exact same problem. We installed the R5SHPn cards throughout the summer and up until October. The cards are failing in the exact same manor as you described. I have contacted Mikrotik to see if there are any known issues. According to them they are not seeing any major issues. My co...
by mac86
Thu May 30, 2013 2:32 pm
Forum: General
Topic: problem in PPPOE authentication
Replies: 8
Views: 2610

Re: problem in PPPOE authentication

6, in my case.
by mac86
Sun May 05, 2013 4:49 am
Forum: General
Topic: problem in PPPOE authentication
Replies: 8
Views: 2610

Re: problem in PPPOE authentication

same problem too :-(
by mac86
Tue Apr 30, 2013 3:19 am
Forum: Scripting
Topic: max async requests?
Replies: 1
Views: 558

max async requests?

there is a maximum number SentAsync requests can sent to api?

I need to sent too much rules.

thank you
by mac86
Thu Apr 11, 2013 2:54 am
Forum: Scripting
Topic: Pattern match with PHP API?
Replies: 15
Views: 3006

Re: Pattern match with PHP API?

I mean if there is a simple way to do this: /queue simple remove [/queue simple find] Like I said - No. There is no simple way to do this. At least not currently. The above example s are what I could do as a simpler way - if you think that is a simpler way. "Under the hood", what will happen is the...
by mac86
Wed Apr 10, 2013 3:05 pm
Forum: Scripting
Topic: Pattern match with PHP API?
Replies: 15
Views: 3006

Re: Pattern match with PHP API?

I mean if there is a simple way to do this:
/queue simple remove [/queue simple find]
in order to remove all queue simples (without pattern match)


using "getall" api resource maybe?
by mac86
Wed Apr 10, 2013 2:02 am
Forum: Scripting
Topic: Pattern match with PHP API?
Replies: 15
Views: 3006

Re: Pattern match with PHP API?

BTW, if I want to delete all QUEUE SIMPLES, next code works namespace PEAR2\Net\RouterOS; require_once 'src/PEAR2/Autoload.php'; $apihost='192.168.10.65'; $apiuser='api'; $apipass='api212223'; $client = new Client($apihost,$apiuser,$apipass); $idList = ''; foreach ($client(new Request('/queue simple...
by mac86
Mon Apr 08, 2013 6:11 pm
Forum: Scripting
Topic: Pattern match with PHP API?
Replies: 15
Views: 3006

Re: Pattern match with PHP API?

SOLVED !!!

Thank you very much!
by mac86
Mon Apr 08, 2013 5:59 pm
Forum: Scripting
Topic: Pattern match with PHP API?
Replies: 15
Views: 3006

Re: Pattern match with PHP API?

sorry

I'm not a PHP expert, how ever seem to be a syntax error:
Parse error: syntax error, unexpected '{' in C:\php\pruebas\1.php on line 14
where line 14 is
foreach ($client(new Request('/queue type print .proplist=.id,name')) as $entry) {
sorry for my dumb question.
by mac86
Mon Apr 08, 2013 5:50 pm
Forum: Scripting
Topic: Pattern match with PHP API?
Replies: 15
Views: 3006

Re: Pattern match with PHP API?

Unfortunately, pattern matching is not available in the protocol (yet?), and thus, no client can do it. You have to do it like you do it in your script equivalent - get ALL queue types, and check their names before you remove them. In terms of efficiency, it would be better if you first collect the...
by mac86
Mon Apr 08, 2013 4:29 pm
Forum: Scripting
Topic: Pattern match with PHP API?
Replies: 15
Views: 3006

Pattern match with PHP API?

there is posible to do something like this with API? :foreach i in=[/queue type find] do={ :local uname [/queue type get $i name]; :if ( [:pick $uname 0 7] = "pcq_dw_") do={ /queue type remove $i }; :if ( [:pick $uname 0 7] = "pcq_up_") do={ /queue type remove $i }; } I've tried something like this ...
by mac86
Fri Apr 05, 2013 3:01 pm
Forum: RouterBOARD hardware
Topic: Max PPPoE concurrent sessions in a CCR?
Replies: 10
Views: 7787

Re: Max PPPoE concurrent sessions in a CCR?

how many diferent types of queueu (user packages) you have in queue tree?
[andres@PPPoE_server] /queue type> print count-only 
32
by mac86
Thu Apr 04, 2013 3:00 pm
Forum: RouterBOARD hardware
Topic: Max PPPoE concurrent sessions in a CCR?
Replies: 10
Views: 7787

Re: Max PPPoE concurrent sessions in a CCR?

we used simple queue on concentrator, and have problem over 1200 conn We have over 30 different types of packages, queue three dont simplified our setup We used to use "simple queue" too, and have problems with it over 700/800 pppoe active sessions. When we migrate queues config to "queue tree" sch...
by mac86
Mon Apr 01, 2013 5:54 pm
Forum: RouterBOARD hardware
Topic: Max PPPoE concurrent sessions in a CCR?
Replies: 10
Views: 7787

Re: Max PPPoE concurrent sessions in a CCR?

You use a simple queue or a PCQ queue?

in this case I use queue tree + pcq
by mac86
Mon Apr 01, 2013 7:50 am
Forum: RouterBOARD hardware
Topic: Max PPPoE concurrent sessions in a CCR?
Replies: 10
Views: 7787

Re: Max PPPoE concurrent sessions in a CCR?

I've more than 2000 active pppoe sesiones with a simple x86 box

Image
by mac86
Tue Jun 12, 2012 4:14 am
Forum: Beginner Basics
Topic: Queue tree vs simple
Replies: 4
Views: 7067

Re: Queue tree vs simple

Simple queues would be the easiest to set up, but it will come down to the number of rules that are required. If your set up requires a ton of simple queues, then the tree would be the way to go. This is mainly because simple queues are processed in the order that they appear, so potentially a pack...
by mac86
Mon Aug 22, 2011 1:52 am
Forum: Wireless Networking
Topic: will work this PTP 50km link?
Replies: 28
Views: 6690

Re: will work this PTP 50km link?

WAW...Great JOBS !!!! Congrats...
thank you Keasy!!!
by mac86
Sun Aug 21, 2011 4:42 pm
Forum: Wireless Networking
Topic: Will This Link Work ? Need Your guide and advice
Replies: 12
Views: 1432

Re: Will This Link Work ? Need Your guide and advice

How much bandwidth must you transport ?
TX 10 - 15 mbps and RX 10 - 15 mbps..

may be .... if you use 5Mhz channel ...
please post your results.


have you see my post about 50km ptp link?

http://forum.mikrotik.com/viewtopic.php?f=7&t=52495
by mac86
Thu Aug 18, 2011 10:34 pm
Forum: RouterBOARD hardware
Topic: Lost Key on RB532A !!
Replies: 1
Views: 712

Lost Key on RB532A !!

I 've upgraded rb532a from 3.12 to 3.30 and lost RB KEY ! ROUTER HAS NO SOFTWARE KEY ---------------------------- You have 23h20m to configure the router to be remotely accessible, and to enter the key by pasting it in a Telnet window or in Winbox. See www.mikrotik.com/key for more details. Current ...
by mac86
Fri Aug 05, 2011 3:37 pm
Forum: Wireless Networking
Topic: will work this PTP 50km link?
Replies: 28
Views: 6690

Re: will work this PTP 50km link?

Can you post TCP both directions throughput? And Latency at 5mbit Full duplex traffic? Thanks not yet, because if I do TCP test (from RB to RB), this cause RB reach 100% cpu load doing test, and slow down traffic for that reason I will do TCP test with IPERF client and server. If I do Both directio...
by mac86
Fri Aug 05, 2011 1:42 am
Forum: Wireless Networking
Topic: will work this PTP 50km link?
Replies: 28
Views: 6690

Re: will work this PTP 50km link?

Good post.
Gracias jorgito, un abrazo.
(tengo mas info ... pero tengo que ponerme a subir las imagenes)
by mac86
Thu Aug 04, 2011 2:13 pm
Forum: Wireless Networking
Topic: will work this PTP 50km link?
Replies: 28
Views: 6690

Re: will work this PTP 50km link?

40mhz Turbo?
What version of Mikrotik you got on the boxes, I haven't updated to the latest 5.6, but I haven't seen that in a channel width before.
....
you have 40mhz turbo on RoS too many years before from 5.6 version.
by mac86
Thu Aug 04, 2011 4:45 am
Forum: Wireless Networking
Topic: will work this PTP 50km link?
Replies: 28
Views: 6690

Re: will work this PTP 50km link?

here are some pictures :-) http://img34.imageshack.us/img34/9319/data4w.jpg http://img263.imageshack.us/img263/492/data3.jpg http://img827.imageshack.us/img827/3708/data2w.jpg http://img193.imageshack.us/img193/6383/data1q.jpg http://img14.imageshack.us/img14/893/rosv.jpg http://img577.imageshack.us...
by mac86
Thu Aug 04, 2011 3:10 am
Forum: Wireless Networking
Topic: will work this PTP 50km link?
Replies: 28
Views: 6690

Re: will work this PTP 50km link? (SOLVED)

Hi Guys. Finnaly this link WORKED ! I get -68 db signal (on each side). Nstreme with 40Mhz Channel I've used XR5 + RB433ah + Hyperlink 33db single polarization (vertical polarization) I've tested NV2 but seems not stable yet :-S I've a REAL 53.9 Mbits throughput. (tested with btest) With nv2 I get 6...
by mac86
Tue Jun 14, 2011 11:45 pm
Forum: Wireless Networking
Topic: will work this PTP 50km link?
Replies: 28
Views: 6690

Re: will work this PTP 50km link?

Feedback your results please :)
yes, of course
by mac86
Tue Jun 14, 2011 3:43 pm
Forum: Wireless Networking
Topic: will work this PTP 50km link?
Replies: 28
Views: 6690

Re: will work this PTP 50km link?

I would suggest 433ah + XR5.

There are 2 links here 104km & 80km that with r52hn work very bad, but with xr5 work excellent.

thank you Tsatasos,
I will try XR5 too.
by mac86
Mon Jun 13, 2011 5:52 pm
Forum: Wireless Networking
Topic: will work this PTP 50km link?
Replies: 28
Views: 6690

Re: will work this PTP 50km link?

Dude dont trust this guy. I have a 44km link, running 34db ubnt dishes + rocketm5 with 25db txpower. I got a good signal -57, my worst fresnel zone was worst then yours, u got a very clean fresnel. I can easily have 50mb troughput,btw Im running 20mhz channel. I dont know if u gonna get the 50mb u ...
by mac86
Mon Jun 13, 2011 2:30 am
Forum: Wireless Networking
Topic: will work this PTP 50km link?
Replies: 28
Views: 6690

Re: will work this PTP 50km link?

That link is not gonna work.
It will carry max 5mbit, whatever you do.
Even with big antennas.
why ???
by mac86
Sat Jun 11, 2011 8:24 pm
Forum: Wireless Networking
Topic: will work this PTP 50km link?
Replies: 28
Views: 6690

Re: will work this PTP 50km link?

No se si habras montado las graficas reales de la antena rocket dish porque miro que el freznel esta muy abierto, yo monte un enlace punto a punto a 45 km y he logrado pasar 20mbps full duplex a 20mhz, supongo que a 40mhz se podria lograr algo mejor, pero no me aventuro hacerlo porque la zona donde...
by mac86
Sat Jun 11, 2011 5:57 pm
Forum: Wireless Networking
Topic: will work this PTP 50km link?
Replies: 28
Views: 6690

will work this PTP 50km link?

Hi,

I need to get 50 Mbit throughput on a 49km PTP link.

Image

Which equipment suggest for each point ?

I think that a rb800 (with nstreme or nv2), and 34db rocket dish antenna , with ....

- sr71-15 ?
- r52hn ?
- other suggests?
by mac86
Fri Dec 17, 2010 1:22 am
Forum: Scripting
Topic: [BUG?] scripts .auto.rsc uploaded RB750G don't autoexecute
Replies: 2
Views: 869

[BUG?] scripts .auto.rsc uploaded RB750G don't autoexecute

Hi guys! seems like scripts .auto.rsc uploaded via FTP to RB750G don't autoexecute. Then I've to run scripts manually thought "/import file=XXX.auto.rsc" in order to run properly that script I've tried with 3.30 , 4.15 and 5.0rc5 scripts's log files remain with 0 bytes. admin@RB750G] > /file print #...
by mac86
Fri Aug 27, 2010 3:16 am
Forum: The Dude
Topic: DOCSIS Statistics
Replies: 2
Views: 1925

Re: DOCSIS Statistics

VERY GOOD WORK !!! :D :D :D
by mac86
Thu Aug 20, 2009 1:38 am
Forum: General
Topic: CMTS PCI card
Replies: 5
Views: 2295

Re: CMTS PCI card

Hi !

I've mailed to c9networks, but they said don't build any more PCI cmts based
interfaces.

Have you been get your CMTS PCI interface based ?

I've a experience with linux. I think there is possible to do something.

best regards.
Andres.
by mac86
Mon Aug 10, 2009 5:15 am
Forum: The Dude
Topic: The Dude video workshops
Replies: 4
Views: 5703

Re: The Dude video workshops

good video and slides!
by mac86
Fri Jun 05, 2009 2:39 pm
Forum: General
Topic: cacti: Mikrotik RouterOS Statistics (Update 11/19/2013)
Replies: 85
Views: 58147

Re: cacti: Mikrotik RouterOS Statistics (Update 01/18/2008)

good work!
I never used cacti, but I will try it !
by mac86
Tue Mar 24, 2009 5:49 am
Forum: General
Topic: Load Balance: 3 PPPoE adsl (same ISP)+webProxy, it is possib
Replies: 15
Views: 15213

Re: Load Balance: 3 PPPoE adsl (same ISP)+webProxy, it is possib

Hi ! I'm trying to connect my local ROS (6 adsl) with my remote ROS (1 T1 line, and 6 public IPs) Then I make 6 EOIP tunnels from local ROS to Remote ROS, using static routes in order to each route use each adsl line. Thath works very great...!! My problem is my 6 ADSL on local router have IP dynami...
by mac86
Tue Mar 24, 2009 4:29 am
Forum: General
Topic: Load Balance: 3 PPPoE adsl (same ISP)+webProxy, it is possib
Replies: 15
Views: 15213

Re: Load Balance: 3 PPPoE adsl (same ISP)+webProxy, it is possib

Please, if you later can post your configuration, I will to thank you.

Best regards.
by mac86
Mon Mar 23, 2009 9:42 pm
Forum: General
Topic: Load Balance: 3 PPPoE adsl (same ISP)+webProxy, it is possib
Replies: 15
Views: 15213

Re: Load Balance: 3 PPPoE adsl (same ISP)+webProxy, it is possib

EXCELENT!

can you post your configuration ?

regards
andres
by mac86
Thu Nov 20, 2008 2:03 am
Forum: General
Topic: problem with netinstall and cf kingston 2gb
Replies: 4
Views: 1121

Re: problem with netinstall and cf kingston 2gb

My netinstall can't found my CF Kingston 2gb. (with ide CF adapter)

Can anybody help with this ?

thank you
andres.
by mac86
Sat Oct 25, 2008 10:06 pm
Forum: General
Topic: BUG on v3.15 ?
Replies: 3
Views: 1159

Re: BUG on v3.15 ?

THANK YOU VERY MUCH!!!

SOLVED.
by mac86
Sat Oct 25, 2008 6:57 pm
Forum: General
Topic: BUG on v3.15 ?
Replies: 3
Views: 1159

BUG on v3.15 ?

Hi I want to report this. I've 3.15 on a x86 PC. With this on IP FIREWALL MANGLE: 2 ;;; Trafico entrante al RouterOs chain=via_rapida action=mark-packet new-packet-mark= via_rapida passthrough=no src-address-type=local 3 ;;; Trafico saliente del RouterOs chain=via_rapida action=mark-packet new-packe...
by mac86
Thu Sep 25, 2008 12:15 am
Forum: The Dude
Topic: Standalone Linux Dude?
Replies: 20
Views: 6396

Re: Standalone Linux Dude?


You have my VOTE :lol:

Mee too ... !!!

Well be VERY NICE access remotly dude server (may be a Java interface?)

best regards.
andres.
by mac86
Mon Sep 15, 2008 4:22 am
Forum: General
Topic: Feature Request : TFTP server
Replies: 27
Views: 7485

Re: Feature Request : TFTP server

I need a TFTP server because in my "cable modem" network, when suscriber modems boot, them get TFTP file trought a DHCP linux server. Would be REALLY NICE if ROS could have this feature. I use CMTS as NAS, with docis 2.0 protocol, which is a very extended standard on cable modem industrie my 2 cents.
by mac86
Sat Sep 13, 2008 4:11 pm
Forum: General
Topic: PPPOE DIE even on 3.13
Replies: 50
Views: 9596

Re: PPPOE DIE even on 3.13

My setup Ros: v3.11 Intel Pentium Dual Core: 3000 Mhz (set multi-cpu =YES) RAM= 1Gb PPPoE Secrets = 372. Licencie = Level 5 Max simultaneously PPPOE users = about 211 I've not major problems. Everything is OK, but sometimes %CPU overhead (each 2 o 3 days), and PPPoE server begins to disconnect users...
by mac86
Fri Aug 15, 2008 10:06 pm
Forum: Wireless Networking
Topic: poor upload (horrible upload) (incl. screenshot)
Replies: 12
Views: 2010

Re: poor upload (horrible upload) (incl. screenshot)

What hardware do you use at client side? they are not MT cpe. they are edimax, d-link, micronet... Hi, I've solved this problem on Edimax CPE, with upgrading last edimax firmware (v1.21) from edimax website (I don't use edimax plus firwmare). This is my solution. Have you finded other way to solve ...
by mac86
Sat Jul 05, 2008 5:03 pm
Forum: Wireless Networking
Topic: Sector Antennas Best Practices
Replies: 96
Views: 23665

Re: Sector Antennas Best Practices

a good read:
http://www.wi-fiplanet.com/tutorials/ar ... hp/3756431

checkout the links also.

thank you.
by mac86
Wed Jul 02, 2008 1:15 am
Forum: Wireless Networking
Topic: Sector Antennas Best Practices
Replies: 96
Views: 23665

Re: Sector Antennas Best Practices

Thank you.

Andres.
by mac86
Tue Jul 01, 2008 5:06 pm
Forum: Wireless Networking
Topic: Sector Antennas Best Practices
Replies: 96
Views: 23665

Re: Sector Antennas Best Practices

Yes, I am talking about separate mini-pci cards, put in whatever you want ( RB, PC, anything), and configured exactly the same, includind SSID. The difference is that if you do not want your client to be able to connect to sector 3, for example, you put a access list rule for the respective card, w...
by mac86
Tue Jul 01, 2008 12:16 am
Forum: Wireless Networking
Topic: Sector Antennas Best Practices
Replies: 96
Views: 23665

Re: Sector Antennas Best Practices

Use 1,5,9,12,13. You will see that 12 and 13 are spaced 12 mhz apart. Will help you a little, if you intend in keeping all of them. What I don't get, is why you want the omni...... You should have proper coverage from the sector antennas, and if you need it as a separate interface.... create a vap ...
by mac86
Wed Jun 25, 2008 7:46 pm
Forum: Wireless Networking
Topic: Sector Antennas Best Practices
Replies: 96
Views: 23665

Re: Sector Antennas Best Practices

Well I tested yesterday I just put all my AP with same SSID. When users move around they always will connect to stronger signal. When they switch to other AP will be a reconnection so it’s better if you have all AP on same network to avoid authentication problems. Sorry my bad English... What about...
by mac86
Wed Jun 25, 2008 5:11 pm
Forum: Wireless Networking
Topic: Sector Antennas Best Practices
Replies: 96
Views: 23665

Re: Sector Antennas Best Practices

Yes, I have tried this. Most of the buildings I have antennas on have 3 antennas on them. All on the same channel (ch 13) and all wds'd together. Usually one is ap bridge and the other 2 are wds slaves. No interference problems at all. I have found wds very helpful with using a single frequency for...
by mac86
Wed Jun 25, 2008 3:03 am
Forum: General
Topic: Lost graphs - issue
Replies: 5
Views: 1024

Re: Lost graphs - issue

Recently, we lost power. I was able to do a system shutdown before the power went out. However, the power came back before the UPS died. So I unplugged the RB1000 and plugged it back in. Later I accessed the graphs, and they were all missing. I noticed that the time had reset, which is an issue wit...
by mac86
Wed Jun 25, 2008 2:55 am
Forum: Wireless Networking
Topic: Sector Antennas Best Practices
Replies: 96
Views: 23665

Re: Sector Antennas Best Practices

Why not simply put them all on Channel 1 and WDS them together? Create static WDS links between each interface and add them all to the same RTSP bridge. Give all of the wireless interfaces the same ssid. Basically your array will appear as one big antenna. Somebody has tried this ? what about inter...
by mac86
Wed Jan 16, 2008 3:13 pm
Forum: General
Topic: graphing resource HDD (second disk) ?
Replies: 0
Views: 862

graphing resource HDD (second disk) ?

Hi, T here is possible to get graphing tool working for a second hdd disk ? I get with no problems graphing for my master HDD primary disk with: http://a.b.c.d/graphs/hdd/ Also, I've : [admin@Mikrotik] /tool graphing> resource print Flags: X - disabled # ALLOW-ADDRESS STORE-ON-DISK 0 0.0.0.0/0 yes H...
by mac86
Thu Jan 03, 2008 10:12 pm
Forum: General
Topic: "always-from-cache" documentation ?
Replies: 4
Views: 4229

"always-from-cache" documentation ?

Hi, what is these parameters ? serialize-connections: no always-from-cache: no [admin@MikroTik] /ip proxy> print enabled: yes src-address: 0.0.0.0 port: 8080 parent-proxy: 0.0.0.0 parent-proxy-port: 0 cache-drive: system cache-administrator: "webmaster" max-cache-size: 973000KiB cache-on-disk: yes m...
by mac86
Fri Nov 30, 2007 1:54 am
Forum: Scripting
Topic: Graphing proxy HITs with MRTG.
Replies: 2
Views: 1300

Re: Graphing proxy HITs with MRTG.

Thanks Maxi :-)

MRTG Cache Hits example graphics,

and another script that count PPPoE active sessiones (green line) and total sessions (blue line)

I will post later mrtg / perl script that count pppoe sessions.

Enjoy 8)
by mac86
Thu Nov 29, 2007 12:20 am
Forum: Scripting
Topic: Graphing proxy HITs with MRTG.
Replies: 2
Views: 1300

Graphing proxy HITs with MRTG.

I'm monitoring with MRTG some RouterOS variables in order to get a idea how it is working. This is my script to monitor CACHE HITS on my ROUTER OS 3.0rc11 #!/usr/bin/perl $SSH="/usr/bin/ssh"; $USERMT="linux"; $CERTMT="/root/.ssh/id_dsa"; $HOSTMT="168.192.1.2"; #######################################...
by mac86
Tue Nov 20, 2007 8:46 pm
Forum: General
Topic: Traffic Flow crash my Router OSv3.0rc6 (BUG! also on rc8 !!)
Replies: 10
Views: 2620

Re: Traffic Flow crash my Router OSv3.0 (BUG! also on rc10 !!)

UPD: Traffic-flow should work when Dual Core is disabled, 'system hardware set multiple-core=no'.
Hi Sergejs,

This will be fixed in next release candidate ? ( I need multiple-core=yes ) .
I get high cpu load if system hardware set multiple-core=no

thank you very much.
by mac86
Tue Nov 06, 2007 3:40 pm
Forum: General
Topic: Load Balance: 3 PPPoE adsl (same ISP)+webProxy, it is possib
Replies: 15
Views: 15213

Re: Load Balance: 3 PPPoE adsl (same ISP)+webProxy, it is possib

Very good post, eugenevdm. In the mean time I will continue making Load balance (multiple adsl, same provider and same IP gateway, with proxy cache) on a Linux debian box (kernel tuned), with diferents HTB scripts that make all work, QoS, availability and so on inslusive... he he. I don't know a bet...
by mac86
Mon Nov 05, 2007 4:37 pm
Forum: General
Topic: Load Balance: 3 PPPoE adsl (same ISP)+webProxy, it is possib
Replies: 15
Views: 15213

Re: Load Balance: 3 PPPoE adsl (same ISP)+webProxy, it is possib

sorry gmeyer ,

I've deleted all MT related, and put a Linux Debian and now works everythig on a very good way !!

4 adsl (same ISP , same gateway, pppoe)
load balance
squid - cache

and the most important: it works !!

best regards,
Andres.
by mac86
Thu Nov 01, 2007 1:21 am
Forum: General
Topic: winbox in V3Rx
Replies: 18
Views: 2183

Re: winbox in V3Rx

ha ha ha ha .....! :-D
by mac86
Wed Oct 31, 2007 8:36 pm
Forum: General
Topic: winbox in V3Rx
Replies: 18
Views: 2183

Re: winbox in V3Rx

i faced an annoying issue in winbox for v3rX , its not saving the windows setting , each time i added somthing from the show column field , i have to add it again next time i enter this window !!! example : in simple queue window the default hasnt TX, Rx .. so i need to add it from show column , ea...
by mac86
Sat Oct 27, 2007 3:26 am
Forum: General
Topic: Load Balance: 3 PPPoE adsl (same ISP)+webProxy, it is possib
Replies: 15
Views: 15213

Load Balance: 3 PPPoE adsl (same ISP)+webProxy, it is possib

Hi, I've 3 adsl (same ISP, same IP gateway), and I want to make load balance, with MT 3.0Rc9 The magic is just here: /ip route add gateway=pppoe_out1,pppoe_out2,pppoe_out3 default gateway is interface based. With NTH (on mangle prerouting), and SRCDST (on postrouting nat) all works! How ever when I ...
by mac86
Sat Oct 27, 2007 3:01 am
Forum: General
Topic: 3.0rc9 Corrupt?
Replies: 2
Views: 1073

Re: 3.0rc9 Corrupt?

I get downloaded routeros (npk), and works perfectly...

Maybe mikrotik´s download server are congestioned
by mac86
Fri Oct 26, 2007 10:07 pm
Forum: General
Topic: Traffic Flow crash my Router OSv3.0rc6 (BUG! also on rc8 !!)
Replies: 10
Views: 2620

Re: Traffic Flow crash my Router OSv3.0rc6 (BUG! also on rc8 !!)

Hi,

this:
'/system hardware set multiple-core=no'.
and Rc9 has worked !!

thank you !!
by mac86
Thu Oct 25, 2007 3:54 am
Forum: General
Topic: Traffic Flow crash my Router OSv3.0rc6 (BUG! also on rc8 !!)
Replies: 10
Views: 2620

Re: Traffic Flow crash my Router OSv3.0rc6 ( BUG!! Also on rc8)

I've tested with RouterOS v3.0rc8 and have same problem

when I set "version 9" on traffic flow, Routeros CRASH !!!
by mac86
Mon Oct 22, 2007 7:37 pm
Forum: General
Topic: WinBox and "show columns" feature
Replies: 34
Views: 13065

Re: WinBox and "show columns" feature

Hi!

when you say "Other ways", do you mean close winbox with "X" icon (close window icon upper right) ?

thank you
by mac86
Mon Oct 22, 2007 5:14 pm
Forum: General
Topic: WinBox and "show columns" feature
Replies: 34
Views: 13065

WinBox and "show columns" feature

Hi, I'm testing new routerOs 3.0rc6 and I've noticied new "show columns" feature on WinBox (and I think this was a very good addon on WinBox !) How ever, when I exit from my winBox, I lost selected columns, and I must to select my "show columns" again and again, every time I log out from WinBox. The...
by mac86
Mon Oct 22, 2007 5:10 pm
Forum: General
Topic: Traffic Flow crash my Router OSv3.0rc6 (BUG! also on rc8 !!)
Replies: 10
Views: 2620

Re: Traffic Flow crash my Router OSv3.0rc6 ( BUG ?)

ok, thankyou laurinkus.
by mac86
Sun Oct 21, 2007 4:43 pm
Forum: General
Topic: Mikrotik + Web Proxy Queueing is Impossible ?
Replies: 101
Views: 28179

Re: Mikrotik + Web Proxy Queueing is Impossible ?

Hi Pokeman!
for your give hint . i make posible this to my linux box ! :) over 20 mb wan link and 2000 users are running well since 3 days ! thanks again

Very very good ...!!

Have you tested Mikrotik web proxy (on RouterOs 3.x) ?
by mac86
Sun Oct 21, 2007 3:29 am
Forum: General
Topic: Traffic Flow crash my Router OSv3.0rc6 (BUG! also on rc8 !!)
Replies: 10
Views: 2620

Traffic Flow crash my Router OSv3.0rc6 (BUG! also on rc8 !!)

Hi I want to monitor my network with NTOP and NET FLOW mikrotik feature. But, when I add a Net Flow target , my RouterOs crash....!!!!! Can this be a BUG ? [linux@mikrotik] > /system resource print uptime: 18m2s version: "3.0rc6" free-memory: 204832kB total-memory: 256776kB cpu: "Intel(R)" cpu-count...
by mac86
Wed Oct 03, 2007 3:40 am
Forum: General
Topic: Mikrotik + Web Proxy Queueing is Impossible ?
Replies: 101
Views: 28179

Re: Mikrotik + Web Proxy Queueing is Impossible ?

Hi, If you check this old post: http://forum.mikrotik.com/viewtopic.php?f=2&t=12334&hilit= you can see that I've asked this web-cache issue last year (without reply). Also, I asked this on my last Mikrotik training and get no answer :-( This is Not possible with 2.9.x routeros (at least until 2.9.46...
by mac86
Tue Oct 02, 2007 3:48 am
Forum: General
Topic: Mangle Feature Request
Replies: 15
Views: 4578

Re: Mangle Feature Request

You can use Layer7 protocol (from last RouterOS 3 version) with Layer7 you can match a lot of traffic applications ... wiki skypeout [slow] [slow] ok [VoIP][P2P][Proprietary] overmatch Skype to phone - UDP voice call (program to POTS phone) - http://skype.com wiki skypetoskype [fast] [fast] ok [VoIP...
by mac86
Thu Sep 20, 2007 2:24 am
Forum: General
Topic: Layer7 in firewall - 3.0rc5
Replies: 26
Views: 7877

Re: Layer7 in firewall - 3.0rc5

Congratulations !!!

this is a very good news on Router OS !!!

Regards
Andres.
by mac86
Tue Sep 04, 2007 11:42 pm
Forum: General
Topic: Freeradius/Dialupadmin/MySQL/Mikrotik
Replies: 2
Views: 859

Re: Freeradius/Dialupadmin/MySQL/Mikrotik

Hello,

which is your freeradius backend ? mysql ?

in other words, how do you store your " user / passwords" pairs in your system ?

regards.
andres.
by mac86
Wed Aug 22, 2007 1:39 pm
Forum: The User Manager
Topic: share bandwidth between 2 or more users (IPs)
Replies: 8
Views: 2576

Re: share bandwidth between 2 or more users (IPs)

Yes!! I think a good way could be put a "radio contention" field in profile definition, (in add to RX / TX rate fields). I think this "script" (that already using with PERL::NET::SSh scripts outer from routerOS), in something way like this: On "queue simple profile" (or whatever), if we create a "si...
by mac86
Wed Aug 22, 2007 4:16 am
Forum: The User Manager
Topic: share bandwidth between 2 or more users (IPs)
Replies: 8
Views: 2576

Re: share bandwidth between 2 or more users (IPs)

intresting, natedogg104 !

how ever, that is dirty way. :?

I think that "share bandwidth between 2 or more users (IPs)" must
be in "roadmap" usermanager, don't you think ?

Best regards :D
by mac86
Mon Aug 20, 2007 8:58 pm
Forum: The User Manager
Topic: share bandwidth between 2 or more users (IPs)
Replies: 8
Views: 2576

Re: share bandwidth between 2 or more users (IPs)

Thanks, Sergejs.

Is that feature on "to-do" usermanager list or "roadmap" ?

will be added in the future ?


best regards.
by mac86
Sun Aug 19, 2007 10:10 pm
Forum: The User Manager
Topic: What happened with topic Mikrotik User Manager (beta)??
Replies: 30
Views: 11545

Re: What happened with topic Mikrotik User Manager (beta)??

What about next...
16. Option to set the (.....) and parent queue.

Userman support it ? or will be ?
by mac86
Sun Aug 19, 2007 9:32 pm
Forum: The User Manager
Topic: share bandwidth between 2 or more users (IPs)
Replies: 8
Views: 2576

share bandwidth between 2 or more users (IPs)

Hi, There is a way to share bandwidth between 2 or more users (IPs) in "user manager" way ? For each user created with it, RouterOs allocate bandwidth dedicate for ir (rx and tx rate). What about if I need to create (i.e.) 4 users: 64k for: (user A, user B, user C and user D) and I need to SHARE a m...
by mac86
Sat Aug 18, 2007 11:51 pm
Forum: The User Manager
Topic: Can't login through user-manager and pppoe ( SOLVED !)
Replies: 1
Views: 2252

Re: Can't login through user-manager and pppoe ( SOLVED !)

this error : manager,debug received remote request from 127.0.0.1:32772 with unknown address, dropping in 18-Aug 16:57:42.76 from 192.168.3.1 was solved putting correct IP ROUTER CLIENT under USERMANAGER: [admin@VM_Ware_Dell] /tool user-manager router> print Flags: X - disabled 0 subscriber=admin na...
by mac86
Sat Aug 18, 2007 11:28 pm
Forum: The User Manager
Topic: Can't login through user-manager and pppoe ( SOLVED !)
Replies: 1
Views: 2252

Can't login through user-manager and pppoe ( SOLVED !)

hi, I've a pppoe server working and when I login with a "/ppp secret" user , (from windows XP), I've no problems Now, I want to create users throught "user-manager", and for this propose I've done next steps: (user man and pppoe server in same box!) [admin@Mikrotik] /ppp aaa> print use-radius: yes a...
by mac86
Sat Jul 21, 2007 3:03 am
Forum: Scripting
Topic: move a firewall rule from a script on a HotSpot
Replies: 2
Views: 1215

Re: move a firewall rule from a script on a HotSpot

it works ! thank you!
by mac86
Fri Jul 13, 2007 1:33 am
Forum: Scripting
Topic: move a firewall rule from a script on a HotSpot
Replies: 2
Views: 1215

move a firewall rule from a script on a HotSpot

Hi, I'm running a HotSpot and I need to put move some firewall rules each time Mikrotik reboot. If I put on command line: /ip firewall filter move [/ip firewall filter find comment="prueba"] 0 ... then it works perfectly. BUT, if I make a script with this, in order to execute above code each time Mi...
by mac86
Thu Jul 12, 2007 1:39 am
Forum: General
Topic: HotSpot as Bridge
Replies: 11
Views: 1636

Re: HotSpot as Bridge [ SOLVED ]

the trick is put attention in chain PRE-HS-INPUT (filter) [admin@MikroTik-HotSpot] ip firewall filter> export # jul/09/2007 22:32:58 by RouterOS 2.9.27 # software id = FAJW-1SN # / ip firewall filter add chain=forward in-interface=ether1 action=accept comment="Download de clientes \(necesito esta ru...
by mac86
Mon Jul 09, 2007 8:36 pm
Forum: General
Topic: HotSpot as Bridge
Replies: 11
Views: 1636

Re: HotSpot as Bridge

It is perfectly possible. You have to configure hotspot service by bridge1, but be sure that DHCP server works for bridge1 too. Hi, thanks for all answers. A question about it: I've to work with broute (bridge) table ? (in order to redirect pakets to bridge) some body haves an script example ? than...
by mac86
Sun Jul 08, 2007 7:34 pm
Forum: General
Topic: HotSpot as Bridge
Replies: 11
Views: 1636

HotSpot as Bridge

Hi,

there is possible run a HotSpot as bridge ?


thank you.
by mac86
Mon Jun 04, 2007 4:31 am
Forum: General
Topic: Difference between Squid and MT Proxy and opinions
Replies: 61
Views: 9856

Re:

Don't you have proble with this ?
 
reload_into_ims on 
by mac86
Sat Nov 25, 2006 1:09 pm
Forum: General
Topic: Webproxy "HIT" Objects
Replies: 0
Views: 1260

Webproxy "HIT" Objects

I've a transparent webproxy, and QoS and BandWidth limitation per user. When a user request a web object, and webproxy found that object in his cache memory or disk ( a HIT squid cache event), I want to send this object from MT to user with max speed. That is possible ? In linux enviroment I use ZPH...
by mac86
Sat Nov 25, 2006 1:59 am
Forum: General
Topic: Shaping over multiple LAN interfaces
Replies: 2
Views: 990

Shaping over multiple LAN interfaces

Hi, I've 1 WAN ( My internet adsl provider ) and 2 LAN networks on my RouterOS. My Interfaces are: ether1 = PPPoE ISP connection ether2 = 192.168.1.1/24 wlan1 = 192.168.2.1/24 My 2 LANs are: 192.168.1.0/24 from ether2 and 192.168.2.0/24 from wlan1 Users connected to ether2: 192.168.1.11/24 (user a1)...