MikroTik

mac86

/ip firewall mangle
add out-interface=YOUR_WAN_INTERFACE protocol=tcp tcp-flags=syn action=change-mss new-mss=1300 chain=forward tcp-mss=1301-65535

Try this on router, and see if its helps. Does your ISP use pppoe'? Then you need to change MTU

it WORKS !! Thank you!

mac86

Can you try this?

viewtopic.php?t=136092&sid=85bf98bbc801 ... 011dedd466

mac86

Ctr+X - Moderator

This is SPAM.

please, don't send us spam
This is a Mikrotik Forum.

thank you.

mac86

Hello!
...........

EXCELENT POST.
THANK YOU!!!

mac86

this script check your publick ip and return in a local variable.

ros code
{
/tool fetch url="http://myip.dnsomatic.com/" mode=http dst-path=mypublicip.txt
local ip [file get mypublicip.txt contents ]
put $ip
}

THANK YOU !!!!
Still Works!

mac86

seems like 207.32.194.24 doesn't work anymore

mac86

can anyone confirm that version 6.44.5 is stable with the CCR1072?

Yes, I can confirm it.
4 weeks without reboots, and going on.....

mac86

We've downgraded CCR1072 to 6.44.5 and no more reboots.

mac86

I want to inform that we should also downgrade CCR1072.
With 6.45.1 we have an unexpected restart every day.

Simply lower CCR to 6.44.5 and no more bad reboots.

mac86

I've fixed my dude db with

https://wiki.mikrotik.com/wiki/Manual:T ... _db_repair

thank you!

mac86

Are u doing too much nat or mangle?

Enviado desde mi Moto G (5) mediante Tapatalk

mac86

no updates here ?....

mac86

Could you find a fix? After 20 days my CCR rebooted out of the blue again... So it becoming stable after removing only 1 PSU was just coincidence. Put the PSU back in place, better to have it rebooting than risking it stopping. have you upgraded your hardware routerboard, with last RouterOs version...

mac86

there is some update about this post ? I've a ccr 1072 and get watchdog reboot and kernel panic reboot this is about watchDog reboot nov/29/2017 10:35:40 system,error,critical router was rebooted without proper shutdown by watchdog timer and this is about kernel Failure reboot nov/28/2017 10:33:45 s...

mac86

+1 please

mac86

I just received MikroTik RB951Ui-2HnD from one of my friend to setup the hotspot with it. Well during my experiments (which included firmware upgrade to 6.33.5) somehow I bricked it. Google search landed me on this page. I tried everything mentioned here but my modem never picked up by netinstall.e...

mac86

Still fixing.... From: http://www.changeip.com/ Service Status Sunday 12/11/2016 at 1PM PT we experienced a database failure that cascaded through all of our redundant systems. At 2PM PT we started the process of restoring data from systems backup. Unfortunately due to the size of the database the r...

mac86

Hi, seems like changeip.com is down?

We use changeIP in order to setup DDNS on many RouterOS devices.

mac86

Very good work, Thank you !!!

It's possible to archive traffic history like PNRG ?

http://www.netpro-ar.com/monitoreo-de-t ... y-netflow/

mac86

I modified the whole stuff a little bit, e.g. beautified the date-string to represent YYYY-MM-DD format and added an /export file to the backup so one gets a human readable format as well. The whole thing can be found at Automated RouterOS Backup to FTP in Harry's TechBlog. Thank you ZAP71 ...! Ver...

mac86

Hi...! I've a RB1100 ah X2, after a storm eth1 to eth10 can't link. How ever, eth11, eth12, and eth13 works OK I've upgraded routerboard firwmare to 3.24, and router OS to 6.35, but eth1 to eth10 fails and light up, see picture. http://s32.postimg.org/44fe4ng91/IMG_20160512_115937130_HDR.jpg How eve...

mac86

Hi!

there is a way to install npk file under Linux (using "wine") ?

I used to use wine to run dude 4.0b3 ".exe" file version.

how ever I can't find v6 ".exe" file.

many thanks.

mac86

Would you mind sharing what you did to get the ELK system up and running?

Been playing a bit in the ELK arena lately - and would love to see netflows into elk

+1

mac86

look very good !!!

amazing work

Thank you very much!

mac86

Hi, Many times I was wondering how to graph IP traffic in / out from all hosts, like "Mrtg" http://oss.oetiker.ch/mrtg/ Some times I tried queue simple graph... other times tried by to active SNMP and use Cacti " http://www.cacti.net " or similar SNMP app This time I think I've f...

mac86

no updates yet?

mac86

Because it;s hard for devs to track every bug/problem through different users posts, it would be nice a bug tracking system.. Ok, if I put this issue in forum , maybe others users can report more info about this issue. BTW, I will try next week same configuration with a CCR instead a x86 Supermicro...

mac86

You didn;t get the point, if you want to make a problem/bug report then you have to mail the mikrotik team since this forum isn;t for reporting issues. why not? if you see all mikrotik forum you can check all users posts mikrotik issues, and share information with other users, in order to try to fi...

mac86

Notice: For support from Mikrotik staff, write to support@mikrotik.com - Mikrotik does not generally offer support on the forum, this is a user forum I disagree. This forum is also to exchange experiences with other users Mikrotik. In this case x86 users. Of course, Mikrotik must post an update abo...

mac86

Hello, Today we decided to upgrade some custom mikrotik using supermicro mobo / E3-1230v2 xeon cpu / with (4) dual intel pro 1000 nics this server have always been < 10 % cpu usage this MT is 24/7 with 100k connections, 10k to 16k pps, 45 Mbps. As soon as we upgraded we noticed massive packet loss!...

mac86

I don't like it.

because all your traffic must pass over Linux "squire isp" box
Then, you don't use a routerOs as core router.

mac86

I am having the exact same problem. We installed the R5SHPn cards throughout the summer and up until October. The cards are failing in the exact same manor as you described. I have contacted Mikrotik to see if there are any known issues. According to them they are not seeing any major issues. My co...

mac86

6, in my case.

mac86

same problem too

mac86

there is a maximum number SentAsync requests can sent to api?

I need to sent too much rules.

thank you

mac86

I mean if there is a simple way to do this: /queue simple remove [/queue simple find] Like I said - No. There is no simple way to do this. At least not currently. The above example s are what I could do as a simpler way - if you think that is a simpler way. "Under the hood", what will hap...

mac86

I mean if there is a simple way to do this:

/queue simple remove [/queue simple find]

in order to remove all queue simples (without pattern match)

using "getall" api resource maybe?

mac86

BTW, if I want to delete all QUEUE SIMPLES, next code works namespace PEAR2\Net\RouterOS; require_once 'src/PEAR2/Autoload.php'; $apihost='192.168.10.65'; $apiuser='api'; $apipass='api212223'; $client = new Client($apihost,$apiuser,$apipass); $idList = ''; foreach ($client(new Request('/queue simple...

mac86

SOLVED !!!

Thank you very much!

mac86

sorry

I'm not a PHP expert, how ever seem to be a syntax error:

Parse error: syntax error, unexpected '{' in C:\php\pruebas\1.php on line 14

where line 14 is

foreach ($client(new Request('/queue type print .proplist=.id,name')) as $entry) {

sorry for my dumb question.

mac86

Unfortunately, pattern matching is not available in the protocol (yet?), and thus, no client can do it. You have to do it like you do it in your script equivalent - get ALL queue types, and check their names before you remove them. In terms of efficiency, it would be better if you first collect the...

mac86

there is posible to do something like this with API? :foreach i in=[/queue type find] do={ :local uname [/queue type get $i name]; :if ( [:pick $uname 0 7] = "pcq_dw_") do={ /queue type remove $i }; :if ( [:pick $uname 0 7] = "pcq_up_") do={ /queue type remove $i }; } I've tried ...

mac86

how many diferent types of queueu (user packages) you have in queue tree?

[andres@PPPoE_server] /queue type> print count-only 
32

mac86

we used simple queue on concentrator, and have problem over 1200 conn We have over 30 different types of packages, queue three dont simplified our setup We used to use "simple queue" too, and have problems with it over 700/800 pppoe active sessions. When we migrate queues config to "...

mac86

You use a simple queue or a PCQ queue?

in this case I use queue tree + pcq

mac86

I've more than 2000 active pppoe sesiones with a simple x86 box

mac86

check this

http://forum.mikrotik.com/viewtopic.php ... mplemented

mac86

Simple queues would be the easiest to set up, but it will come down to the number of rules that are required. If your set up requires a ton of simple queues, then the tree would be the way to go. This is mainly because simple queues are processed in the order that they appear, so potentially a pack...

mac86

WAW...Great JOBS !!!! Congrats...

thank you Keasy!!!

mac86

How much bandwidth must you transport ?
TX 10 - 15 mbps and RX 10 - 15 mbps..

may be .... if you use 5Mhz channel ...
please post your results.

have you see my post about 50km ptp link?

http://forum.mikrotik.com/viewtopic.php?f=7&t=52495

mac86

I 've upgraded rb532a from 3.12 to 3.30 and lost RB KEY ! ROUTER HAS NO SOFTWARE KEY ---------------------------- You have 23h20m to configure the router to be remotely accessible, and to enter the key by pasting it in a Telnet window or in Winbox. See www.mikrotik.com/key for more details. Current ...

mac86

Can you post TCP both directions throughput? And Latency at 5mbit Full duplex traffic? Thanks not yet, because if I do TCP test (from RB to RB), this cause RB reach 100% cpu load doing test, and slow down traffic for that reason I will do TCP test with IPERF client and server. If I do Both directio...

mac86

Good post.

Gracias jorgito, un abrazo.
(tengo mas info ... pero tengo que ponerme a subir las imagenes)

mac86

40mhz Turbo?
What version of Mikrotik you got on the boxes, I haven't updated to the latest 5.6, but I haven't seen that in a channel width before.
....

you have 40mhz turbo on RoS too many years before from 5.6 version.

mac86

here are some pictures :-) http://img34.imageshack.us/img34/9319/data4w.jpg http://img263.imageshack.us/img263/492/data3.jpg http://img827.imageshack.us/img827/3708/data2w.jpg http://img193.imageshack.us/img193/6383/data1q.jpg http://img14.imageshack.us/img14/893/rosv.jpg http://img577.imageshack.us...

mac86

Hi Guys. Finnaly this link WORKED ! I get -68 db signal (on each side). Nstreme with 40Mhz Channel I've used XR5 + RB433ah + Hyperlink 33db single polarization (vertical polarization) I've tested NV2 but seems not stable yet :-S I've a REAL 53.9 Mbits throughput. (tested with btest) With nv2 I get 6...

mac86

Feedback your results please

yes, of course

mac86

I would suggest 433ah + XR5.

There are 2 links here 104km & 80km that with r52hn work very bad, but with xr5 work excellent.

thank you Tsatasos,
I will try XR5 too.

mac86

Dude dont trust this guy. I have a 44km link, running 34db ubnt dishes + rocketm5 with 25db txpower. I got a good signal -57, my worst fresnel zone was worst then yours, u got a very clean fresnel. I can easily have 50mb troughput,btw Im running 20mhz channel. I dont know if u gonna get the 50mb u ...

mac86

That link is not gonna work.
It will carry max 5mbit, whatever you do.
Even with big antennas.

why ???

mac86

No se si habras montado las graficas reales de la antena rocket dish porque miro que el freznel esta muy abierto, yo monte un enlace punto a punto a 45 km y he logrado pasar 20mbps full duplex a 20mhz, supongo que a 40mhz se podria lograr algo mejor, pero no me aventuro hacerlo porque la zona donde...

mac86

Hi,

I need to get 50 Mbit throughput on a 49km PTP link.

Which equipment suggest for each point ?

I think that a rb800 (with nstreme or nv2), and 34db rocket dish antenna , with ....

- sr71-15 ?
- r52hn ?
- other suggests?

mac86

no body can help???

mac86

Hi guys! seems like scripts .auto.rsc uploaded via FTP to RB750G don't autoexecute. Then I've to run scripts manually thought "/import file=XXX.auto.rsc" in order to run properly that script I've tried with 3.30 , 4.15 and 5.0rc5 scripts's log files remain with 0 bytes. admin@RB750G] > /fi...

mac86

VERY GOOD WORK !!!

mac86

Hi !

I've mailed to c9networks, but they said don't build any more PCI cmts based
interfaces.

Have you been get your CMTS PCI interface based ?

I've a experience with linux. I think there is possible to do something.

best regards.
Andres.

mac86

good video and slides!

mac86

good work!
I never used cacti, but I will try it !

mac86

Hi ! I'm trying to connect my local ROS (6 adsl) with my remote ROS (1 T1 line, and 6 public IPs) Then I make 6 EOIP tunnels from local ROS to Remote ROS, using static routes in order to each route use each adsl line. Thath works very great...!! My problem is my 6 ADSL on local router have IP dynami...

mac86

Please, if you later can post your configuration, I will to thank you.

Best regards.

mac86

EXCELENT!

can you post your configuration ?

regards
andres

mac86

My netinstall can't found my CF Kingston 2gb. (with ide CF adapter)

Can anybody help with this ?

thank you
andres.

mac86

THANK YOU VERY MUCH!!!

SOLVED.

mac86

Hi I want to report this. I've 3.15 on a x86 PC. With this on IP FIREWALL MANGLE: 2 ;;; Trafico entrante al RouterOs chain=via_rapida action=mark-packet new-packet-mark= via_rapida passthrough=no src-address-type=local 3 ;;; Trafico saliente del RouterOs chain=via_rapida action=mark-packet new-packe...

mac86

You have my VOTE

Mee too ... !!!

Well be VERY NICE access remotly dude server (may be a Java interface?)

best regards.
andres.

mac86

I need a TFTP server because in my "cable modem" network, when suscriber modems boot, them get TFTP file trought a DHCP linux server. Would be REALLY NICE if ROS could have this feature. I use CMTS as NAS, with docis 2.0 protocol, which is a very extended standard on cable modem industrie ...

mac86

My setup Ros: v3.11 Intel Pentium Dual Core: 3000 Mhz (set multi-cpu =YES) RAM= 1Gb PPPoE Secrets = 372. Licencie = Level 5 Max simultaneously PPPOE users = about 211 I've not major problems. Everything is OK, but sometimes %CPU overhead (each 2 o 3 days), and PPPoE server begins to disconnect users...

mac86

What hardware do you use at client side? they are not MT cpe. they are edimax, d-link, micronet... Hi, I've solved this problem on Edimax CPE, with upgrading last edimax firmware (v1.21) from edimax website (I don't use edimax plus firwmare). This is my solution. Have you finded other way to solve ...

mac86

a good read:
http://www.wi-fiplanet.com/tutorials/ar ... hp/3756431

checkout the links also.

thank you.

mac86

Thank you.

Andres.

mac86

Yes, I am talking about separate mini-pci cards, put in whatever you want ( RB, PC, anything), and configured exactly the same, includind SSID. The difference is that if you do not want your client to be able to connect to sector 3, for example, you put a access list rule for the respective card, w...

mac86

Use 1,5,9,12,13. You will see that 12 and 13 are spaced 12 mhz apart. Will help you a little, if you intend in keeping all of them. What I don't get, is why you want the omni...... You should have proper coverage from the sector antennas, and if you need it as a separate interface.... create a vap ...

mac86

Well I tested yesterday I just put all my AP with same SSID. When users move around they always will connect to stronger signal. When they switch to other AP will be a reconnection so it’s better if you have all AP on same network to avoid authentication problems. Sorry my bad English... What about...

mac86

Yes, I have tried this. Most of the buildings I have antennas on have 3 antennas on them. All on the same channel (ch 13) and all wds'd together. Usually one is ap bridge and the other 2 are wds slaves. No interference problems at all. I have found wds very helpful with using a single frequency for...

mac86

Recently, we lost power. I was able to do a system shutdown before the power went out. However, the power came back before the UPS died. So I unplugged the RB1000 and plugged it back in. Later I accessed the graphs, and they were all missing. I noticed that the time had reset, which is an issue wit...

mac86

Why not simply put them all on Channel 1 and WDS them together? Create static WDS links between each interface and add them all to the same RTSP bridge. Give all of the wireless interfaces the same ssid. Basically your array will appear as one big antenna. Somebody has tried this ? what about inter...

mac86

Hi, T here is possible to get graphing tool working for a second hdd disk ? I get with no problems graphing for my master HDD primary disk with: http://a.b.c.d/graphs/hdd/ Also, I've : [admin@Mikrotik] /tool graphing> resource print Flags: X - disabled # ALLOW-ADDRESS STORE-ON-DISK 0 0.0.0.0/0 yes H...

mac86

Hi, what is these parameters ? serialize-connections: no always-from-cache: no [admin@MikroTik] /ip proxy> print enabled: yes src-address: 0.0.0.0 port: 8080 parent-proxy: 0.0.0.0 parent-proxy-port: 0 cache-drive: system cache-administrator: "webmaster" max-cache-size: 973000KiB cache-on-d...

mac86

Thanks Maxi

MRTG Cache Hits example graphics,

and another script that count PPPoE active sessiones (green line) and total sessions (blue line)

I will post later mrtg / perl script that count pppoe sessions.

Enjoy

mac86

I'm monitoring with MRTG some RouterOS variables in order to get a idea how it is working. This is my script to monitor CACHE HITS on my ROUTER OS 3.0rc11 #!/usr/bin/perl $SSH="/usr/bin/ssh"; $USERMT="linux"; $CERTMT="/root/.ssh/id_dsa"; $HOSTMT="168.192.1.2";...

mac86

UPD: Traffic-flow should work when Dual Core is disabled, 'system hardware set multiple-core=no'.

Hi Sergejs,

This will be fixed in next release candidate ? ( I need multiple-core=yes ) .
I get high cpu load if system hardware set multiple-core=no

thank you very much.

mac86

Very good post, eugenevdm. In the mean time I will continue making Load balance (multiple adsl, same provider and same IP gateway, with proxy cache) on a Linux debian box (kernel tuned), with diferents HTB scripts that make all work, QoS, availability and so on inslusive... he he. I don't know a bet...

mac86

sorry gmeyer ,

I've deleted all MT related, and put a Linux Debian and now works everythig on a very good way !!

4 adsl (same ISP , same gateway, pppoe)
load balance
squid - cache

and the most important: it works !!

best regards,
Andres.

mac86

ha ha ha ha .....!

mac86

i faced an annoying issue in winbox for v3rX , its not saving the windows setting , each time i added somthing from the show column field , i have to add it again next time i enter this window !!! example : in simple queue window the default hasnt TX, Rx .. so i need to add it from show column , ea...

mac86

Hi, I've 3 adsl (same ISP, same IP gateway), and I want to make load balance, with MT 3.0Rc9 The magic is just here: /ip route add gateway=pppoe_out1,pppoe_out2,pppoe_out3 default gateway is interface based. With NTH (on mangle prerouting), and SRCDST (on postrouting nat) all works! How ever when I ...

mac86

I get downloaded routeros (npk), and works perfectly...

Maybe mikrotik´s download server are congestioned

mac86

Hi,

this:

'/system hardware set multiple-core=no'.

and Rc9 has worked !!

thank you !!

mac86

YES ! excactly !

mac86

I've tested with RouterOS v3.0rc8 and have same problem

when I set "version 9" on traffic flow, Routeros CRASH !!!

mac86

Hi!

when you say "Other ways", do you mean close winbox with "X" icon (close window icon upper right) ?

thank you

mac86

Hi, I'm testing new routerOs 3.0rc6 and I've noticied new "show columns" feature on WinBox (and I think this was a very good addon on WinBox !) How ever, when I exit from my winBox, I lost selected columns, and I must to select my "show columns" again and again, every time I log ...

mac86

ok, thankyou laurinkus.

mac86

Hi Pokeman!

for your give hint . i make posible this to my linux box ! over 20 mb wan link and 2000 users are running well since 3 days ! thanks again

Very very good ...!!

Have you tested Mikrotik web proxy (on RouterOs 3.x) ?

mac86

Hi I want to monitor my network with NTOP and NET FLOW mikrotik feature. But, when I add a Net Flow target , my RouterOs crash....!!!!! Can this be a BUG ? [linux@mikrotik] > /system resource print uptime: 18m2s version: "3.0rc6" free-memory: 204832kB total-memory: 256776kB cpu: "Inte...

mac86

Hi, If you check this old post: http://forum.mikrotik.com/viewtopic.php?f=2&t=12334&hilit= you can see that I've asked this web-cache issue last year (without reply). Also, I asked this on my last Mikrotik training and get no answer :-( This is Not possible with 2.9.x routeros (at least unti...

mac86

You can use Layer7 protocol (from last RouterOS 3 version) with Layer7 you can match a lot of traffic applications ... wiki skypeout [slow] [slow] ok [VoIP][P2P][Proprietary] overmatch Skype to phone - UDP voice call (program to POTS phone) - http://skype.com wiki skypetoskype [fast] [fast] ok [VoIP...

mac86

Congratulations !!!

this is a very good news on Router OS !!!

Regards
Andres.

mac86

Hello,

which is your freeradius backend ? mysql ?

in other words, how do you store your " user / passwords" pairs in your system ?

regards.
andres.

mac86

Yes!! I think a good way could be put a "radio contention" field in profile definition, (in add to RX / TX rate fields). I think this "script" (that already using with PERL::NET::SSh scripts outer from routerOS), in something way like this: On "queue simple profile" (or...

mac86

intresting, natedogg104 !

how ever, that is dirty way.

I think that "share bandwidth between 2 or more users (IPs)" must
be in "roadmap" usermanager, don't you think ?

Best regards

mac86

Thanks, Sergejs.

Is that feature on "to-do" usermanager list or "roadmap" ?

will be added in the future ?

best regards.

mac86

What about next...

16. Option to set the (.....) and parent queue.

Userman support it ? or will be ?

mac86

Hi, There is a way to share bandwidth between 2 or more users (IPs) in "user manager" way ? For each user created with it, RouterOs allocate bandwidth dedicate for ir (rx and tx rate). What about if I need to create (i.e.) 4 users: 64k for: (user A, user B, user C and user D) and I need to...

mac86

this error : manager,debug received remote request from 127.0.0.1:32772 with unknown address, dropping in 18-Aug 16:57:42.76 from 192.168.3.1 was solved putting correct IP ROUTER CLIENT under USERMANAGER: [admin@VM_Ware_Dell] /tool user-manager router> print Flags: X - disabled 0 subscriber=admin na...

mac86

hi, I've a pppoe server working and when I login with a "/ppp secret" user , (from windows XP), I've no problems Now, I want to create users throught "user-manager", and for this propose I've done next steps: (user man and pppoe server in same box!) [admin@Mikrotik] /ppp aaa> pri...

mac86

it works ! thank you!

mac86

Hi, I'm running a HotSpot and I need to put move some firewall rules each time Mikrotik reboot. If I put on command line: /ip firewall filter move [/ip firewall filter find comment="prueba"] 0 ... then it works perfectly. BUT, if I make a script with this, in order to execute above code ea...

mac86

the trick is put attention in chain PRE-HS-INPUT (filter) [admin@MikroTik-HotSpot] ip firewall filter> export # jul/09/2007 22:32:58 by RouterOS 2.9.27 # software id = FAJW-1SN # / ip firewall filter add chain=forward in-interface=ether1 action=accept comment="Download de clientes \(necesito es...

mac86

It is perfectly possible. You have to configure hotspot service by bridge1, but be sure that DHCP server works for bridge1 too. Hi, thanks for all answers. A question about it: I've to work with broute (bridge) table ? (in order to redirect pakets to bridge) some body haves an script example ? than...

mac86

Hi,

there is possible run a HotSpot as bridge ?

thank you.

mac86

Don't you have proble with this ?

 
reload_into_ims on

mac86

I've a transparent webproxy, and QoS and BandWidth limitation per user. When a user request a web object, and webproxy found that object in his cache memory or disk ( a HIT squid cache event), I want to send this object from MT to user with max speed. That is possible ? In linux enviroment I use ZPH...

mac86

Hi, I've 1 WAN ( My internet adsl provider ) and 2 LAN networks on my RouterOS. My Interfaces are: ether1 = PPPoE ISP connection ether2 = 192.168.1.1/24 wlan1 = 192.168.2.1/24 My 2 LANs are: 192.168.1.0/24 from ether2 and 192.168.2.0/24 from wlan1 Users connected to ether2: 192.168.1.11/24 (user a1)...

Search found 124 matches

ros code