MikroTik

npeca75

[/quote] Completely irrelevant! It is your own responsibility to ensure that you can operate your equipment at sufficient availability for your network. That includes being responsible for backups, rollback possibilities, spare hardware in case it breaks, and also if software is suitable for your pu...

npeca75

When you have a router like that in production, you should partition it so you can always go back to a stable situation without problem. Of course enabling partitioning in a device in production is a risk as well, it will require at least one reboot and it may further disturb the device, so it is b...

npeca75

could not upgrade from 48 to 48.1 kernel failure in previous boot rb3011 Did you do any reboots with 6.48 before this upgrade? The reboot failures with various models (RB3011 and CRS9x) is issue related to the first 6.48 release. I have not yet tested if fresh install of 6.48.1 reboot bricks these ...

npeca75

could not upgrade from 48 to 48.1

kernel failure in previous boot
rb3011

And, after all, the 48 -> 49b11 -> 48.1 was worked

So i am SICK !!! from stable branch
Please, rename it to Beta

npeca75

could not upgrade from 48 to 48.1

kernel failure in previous boot
rb3011

npeca75

SNMP -> Trap send report an error /snmp send-trap oid=2.1.1.1 type=integer value=1 log: error - contact MikroTik support and send a supout file (3) trap are sent, and correctly received host: UDP: [169.254.2.2]:59262->[169.254.101.212]:162 ip: UDP: [169.254.2.2]:59262->[169.254.101.212]:162 .1.3.6.1...

npeca75

I think the moral to this story is to avoid majors (6.48) and wait until the first minor (6.48.1)

Moral of this story:

1. MKT was forced by sales department to release "new" (7b/6b) versions before christmas without testing
2. Never trust blindly and install anything on holiday season

npeca75

rb3011 flapping, 1500 linkdowns for about 30 minutes rb4011 seems to be fine Hi @rushlife I like to ask you, did you upgrade FW (bios) on your 3011 ? I ask this because my 3011 is up with v6.48 and it is stable - NULL link down's , all ETH ports 1G, up without problems but i forgot to update FW (bi...

npeca75

rb3011 flapping, 1500 linkdowns for about 30 minutes rb4011 seems to be fine Hi @rushlife I like to ask you, did you upgrade FW (bios) on your 3011 ? I ask this because my 3011 is up with v6.48 and it is stable - NULL link down's , all ETH ports 1G, up without problems but i forgot to update FW (bi...

npeca75

What are "Port Extensions"

No single word in any Mikrotik wiki...

Hi
You could find useful info here:
https://help.mikrotik.com/docs/display/ ... t+Extender

npeca75

Hi @Mikrotik

is there any chance to implement custom UDP port for sending SNMP traps in next Beta?

now it is impossible to set any port value in traps destination in any IPv4 or IPv6 form
tried from winbox and from CLI

npeca75

Hi is there any chance to one setup custom port as destination for snmp traps ?? eg: 169.254.102.252:165 i tried from winbox and from CLI port 162 is occupied by another program on server so i use 165 for snmptrapd Other network equipment working fine with custom port, even cheap TP-LINK only MKT is...

npeca75

IPv4-mapped IPv6 addresses

ROS v6
::169.254.101.1/96

OpenWRT
::169.254.101.103/96

ROS v7.1b3
::169.254.101.199/96

v6 could ping own adress and .103. Ping to v7 does not work
OpenWRT could ping .1 and own adress. Ping to v7 does not work

v7 could NOT ping own address
v7 could NOT ping .1 or .103

npeca75

You forget that there still is a use-case for the classical meaning of a VPN, a virtual private network. It is e.g. a network between a company and its branches or employees working from home. no ! @pe1chl YOU forget that world is not made by MKT There is plenty other network equipment from other v...

npeca75

So someone who is happy with 20Mbit VPN is pretty normal. If they now use TCP OpenVPN with v6, then new v7 with UDP OpenVPN is good example of useful improvement. And WG even better. Hi @Sob TCP and UDP OpenVPN are both (almost) useless in MKT There is millions,billions,zillions OpenVPN servers wit...

npeca75

I am not that interested in wireguard, but its proponents always claim that it is so much faster than IPsec, so when they are right it should be useful. IPsec on those devices will do like 20-30 Mbit/s and that is usually okay for the normal usages of a VPN. Ok we are talking about 20/30 mbps as MA...

npeca75

This is not an issue with MikroTik als the RB750 or RB2011 you bought nearly 10 years ago still gets a new firmware version every month or so, and adds more and more new features, fixes bugs, etc. Ok, then tell me the new firmware, what is the use ov rb750/2011 with OpenVPN ? or with wireguard? doe...

npeca75

Exactly. WinBox and long software support is what makes RouterOS so great. I assume that I wouldn't be the only customer who would be seriously disappointed, if after just few years I'd have to choose between no new features and bugfixes, and throwing out perfectly functioning and otherwise suffici...

npeca75

So ... it is friday and still no new release

I am still using OpenWRT with DSA on MT7621 because
Ros 7.1b2 does not work with vlans on RB750gr3/RB760igs
Ros 6.x does not have Wireguard

so if i want both "feature" i need to use OpenWRT

any chance for new beta?

npeca75

Hi @msatter as i said, HW offloading working well in v6.xx (without rstp) so, i know what is the difference between old master-slave and new /interface ethernet switch i am talking about ROS v7.x and kernel v5 very simple config # model = RouterBOARD 750G r3 # serial number = 6F38085A9ED2 /interface...

npeca75

Hi to all
after many hours testing i found out that kernel v5 and mt7621 simlpy does not work with integrated switch chip

same setup with HW offload was working in ROS v6.x

Does Mkirotik have in plan to fix HW issues with mt7621?
or we are doomed to use SW switching?

npeca75

In my experience, most people who want to deploy stateful DHCPv6 (like me previously) expect that it does more than it actually does Ok, one single question In your SLAAC environment, how you would decide which device will be routed to linkA, linkB, which device have acces to LanA, which device hav...

npeca75

It would be a huge waste of time for MikroTik to implement this feature at the expense of other crucial features. If they have spare time later, sure, So now i see how things works in MKT I see many posts where forum veterans/trainers say, noooo, you don't need this no, the LZO is silly stuff, no, ...

npeca75

I'm sure they will add it eventually. Unfortunately, so far IPv6 wasn't the biggest priority for them. They added some stuff, but it's not like they are pushing things forward very much. And they only respond here in forum when they feel like it, and that's not very often. Nope, they won't As OpenV...

npeca75

Now i am realy don't understand this everytime when topic came to V6 dhcp, there is bunch of forum guru/veteran who say: noooo, you actualy don't need that please, is stateful dhcp v6 part of RFC? yes ! does MKT implement full dhcp v6? no ! does i asked for help how to build v6 net? no ! if i make a...

npeca75

DHCPv6 does not store the MAC or the Hostname of the client system hmmm, last time i checked OpenWrt is was doing exactly this Linux & Windows hosts have they hostnames and addresses was assigned through IPv6 server as i stated before, production LAN and Android does not belong to production / ...

npeca75

hi @krisjanisj

another issue with rb760igs

temperature sensor is missing
no such item in Winbox and also sensor is missing from SNMP

:( pitty

npeca75

Even Google is against DHCPv6: https://www.nullzero.co.uk/android-does-not-support-dhcpv6-and-google-wont-fix-that/ ... And if google and facebook say so, it is then right??? google will soon or a later implement dhcp v6-pd client in Android and i was read somewhere that FB is use same at they inte...

npeca75

Is there a plan for resolving DNS peer names in WireGuard properties?
or we are doomed to script/resolve/set wireguard peer endpoint?

npeca75

@npeca75 & @tpedko - Is it possible for You to send supout.rif files to support@mikrotik.com, referencing this forum thread, so we can troubleshoot this further?

Ok
supout was sent today
SUP-25925

npeca75

rb 760igs
if i try to make any change on PoE / eth5 router is rebooting with kernek failure message
PoE does not work with "auto", aways say "too low"
in prev v6 release this was worked without problem

npeca75

Hi to all
i noticed that option 23 in dhcp v6 does not work anymore

i have
0x2a00ad0010001f000000000000000002 as value for opt 23
but it is not pushed to clients

older version work vell

npeca75

RB760igs
tried to upgrade from 6.47.1

wooow, RB is dead
only Netinstall could help

shame

npeca75

SLAAC is the standard method, almost nobody uses DHCPv6 to assign addresses don't get me wrong i don't want to argue :) but if someone explain me how to solve these questions, maybe i will consider using SLAAC for example ComputerA is going "out" on gateway1 ComputerB is not allowed to vi...

npeca75

I never required IPv6 dhcp to make IPv6 work... do you? Well, if you look from this point, ... there is always a manual method of assigning v6 address to some workstation or other network equipment but, then, why Mikrotik does not ERASE/DELETE v4 DHCP? what is the use of this anyway? only waste of ...

npeca75

Hi Mikrotik it there any chance that IPv6 will be implemented fully on v7? here i mean stateful DHCP yes, i read it many times, that stateless is enough for home use, but... is OSPF and BGP and L7 filter and EoIP and ... whatever, is they for home use? NO ! they are for routers and stateful IPv6 DHC...

npeca75

Hi to all i using Winbox under *buntu18.04 & wine from 3.22 and now in 3.23 i have an annoying problem with inner window resize what bother me is INTERFACE window it is stretched to MAX horizontal (width) whenever i open Winbox i tried to delete session and save again, but nothing. It is really ...

npeca75

hi @strods

i like to report that
0x0bda / 0x8153 USB Ethernet controller working fine in V7b5

thank you !

npeca75

still same error in ROS 7 beta 4

status: failed
failure: ssl connection error: ssl: fatal alert handshake (6)

npeca75

Hi Mikrotik developers i have a really serious problem with ROS7 in many home installations i have used Realtek USB-ETH adapter for WAN connectivity Maybe you would laugh, but there is a good reason In case of lightning, when electric charge are high i don't want to risk burning out routerboard atta...

npeca75

Hi to all i have this lines in "old" v6 setup's, and working very well :log info "Dynv6: update $host" :local str "api/update\?hostname=$host&ipv6=$Wan6IP&ipv4=$WanIP&token=$ddnspass" /tool fetch address="dynv6.com" host="dynv6.com" src-p...

npeca75

first, you need 2 dhcp client [Codebox] /ip dhcp-client add add-default-route=no dhcp-options=hostname,clientid disabled=no interface=WAN2 script="{\r\ \n # interface name\r\ \n # WAN1 or WAN2\r\ \n :local intf \"WAN2\"\r\ \n #\r\ \n # chk adress. 8.8.8.8 for WAN1, 8.8.4.4 for WAN2\r\...

Search found 42 matches