MikroTik

khialb32

i not really sure, but i think i had the same behavior in 7.1rc4, because I used to have loops in it, and I couldn't figure out why until I downgraded an SXT LTE that was in the topology!

khialb32

Try enabling arp on the hotspot interface.
If not try the 7.2rc1, but be careful losing ur data!

khialb32

still, no fix to the 404 error on Hotspot web page that comes from time to time!

khialb32

well i would say it is completely your mistake, yet, first take the files you can find using winbox and keep them somewhere you can access them again later, second downgrade to v6 as it can load the old DB I believe if it could not load it, try loading it by copying the files you saved earlier to th...

khialb32

+1 i have the same problem, couldnt fix it.

khialb32

Hello, i use some CHR routers for experimenting new features in router os V7 especially Cake and wireguard I have few CHR routers that will expire soon! what happens when the 60 days is expired, will it revert back and be throttled on 1mbps, or it will be normal and simply wont get new routeros vers...

khialb32

Hello everyone, so I have a Router v7 that I use with Wireguard interfaces, I did set up the first WG interface just fine and it works normally. I wanted to add a second interface, but connect that second interface to the same peer ( yet the peer entry should be assigned to the second interface) , o...

khialb32

I currently have it running on a mAP with CAPSMAN and mAP Lite as cap (lab setup) using 7.1, coming from 7.1rc7. 2 smartphones and 1 tablet as client devices. No Radius. It works with some quirks... - after logout, login page sometimes does not show again but the connection is being made (cookie do...

khialb32

i have been using the beta6 for some time at a lab with clients connected to it, I noticed a new thing in the queues, if there is a child queue, then the parent queue will only receive packets that will pass by the CHILD queue TOO, or else it won't that means you can specify same target queues with ...

khialb32

Guys, could any one of you use the hotspot feature, I tried many things and it doesn't seem to respond. ( used beta 5 and now trying on beta 6 and nothing yet) now it is working, the problem i had is that DHCP add arp for leases didn't work with reply only on the interface of the hotspot, i changed ...

khialb32

hey , first of all , i think you should check if the HEX lisence level will make you able to run 300 clients , in my openion , HEX with an SD card with HOTSPOT will run just fine , but i have to ask about the speed you are willing to get of course . i am running hex for about 50 clients with 2-4mbps...

khialb32

hello every one , i have 2 routers an RB2011 and a HEX S , and i have 4 wifi access points and i connect them to the routers using UBNT RADIOS as follow https://scontent-mrs1-1.xx.fbcdn.net/v/t1.15752-9/s2048x2048/50820519_346172832674319_602137548562628608_n.jpg?_nc_cat=106&_nc_eui2=AeE-s268-6h...

khialb32

hello every one , i wish you are doing fine i recently implemented an HOTSPOT on the new HEX S router , and i am willing it to use it along with an RB2011 , this is not the matter i did the following configuration on the HEX S for the HOTSPOT with load balancing /interface bridge add fast-forward=no...

khialb32

hello every one , i was goning to ship some mikrotik devices from USA to outside USA , when i ased for shippment , the company said that mikrotik devices are not registred at Bureau of Industry and Security so they classfy it if it can be exported normally or it needs and export lisence exception , ...

khialb32

hello guys , i've been running HOTSPOT service latey , and it works just fine , but for security reasons , i am changing to PPPOE i left evert thing as it is , and i enabled a PPPoe server on that interface , it accepts connection and show them as active , but even without getting athentication , yo...

khialb32

hello every one , i am running HOTSPOT service on some UBNT APs , but as every one know , HOTSPOT maintains connection using the MAC address ; so if any one spoofs an other mac address , and uses it , he will be athentificated without hacing any account , so how can i stop two devices to have the sa...

khialb32

hello every one , i a running HOTSPOT with radius and user manager , a lot of people would like to share their internet from the pc to the phone or to an other PC , but when ever some one does it , it disconnects after some time and even if you connect back , it still disconnects i tried my self to ...

khialb32

Hey every one , i am a student running an HOTSPOT service , and using mikrotik router ( RB2011UiAS-RM , 800mhz cpu ) i use ubnt airmax to connect the router to the APs ( the site ) , one of my clients is directly connected with an airmax station , and uses an AP ( routing with nat ) so he can get al...

khialb32

you can change that in the templates , you can find that in the user manager settings , you can even copy past an HTML page , then take it back into a folder with css , so it have better look

may i ask you please where are you from ?

khialb32

helo guys , i am running an HOTSPOT using the routerOS with usermanager , and i am using HTTPS for login , which will cause the navigator to display a warning message , not the web login page , so i want to keep the HTTPS for security , and redirect the wifi clients to some other website ( i can eve...

khialb32

how great , i will test it and tell you as soon as possible , thank you

khialb32

Disable default forward on wireless config

bro there is no default routing ,the one on the roof in the diagram is used just as a router , no more , the routing is on the pc with the wifi access to the AP

khialb32

I don't really understand what you are trying to accomplish with this diagram. I'm guessing the "MikroTik router" is not acting as a router otherwise you wouldn't have 192.168.2.0/24 on both sides of it. As long as you don't mind double NAT, what I would do is plug the cable coming down f...

khialb32

hello guys , i wish that you are going and doing well , i have an RB2011UiAS-RM , and i am gonna use it to load balance 6-Wan links and use it for hotspot , i am gonna assume that you know the specification of the RB2011UiAS-RM , i am planning to use limitations of speed and time of course , and whe...

khialb32

i posted the diagram , i wish some body helps

khialb32

"how to route packets from an ip in a network to an other ip in the same network !"

IP's within the same network doesn't need any routing...

yes i see that sir , but i want that to limit the bandwidth between IPs in the same network

khialb32

hello guys , i wish i can explain this well , i have a Wi-Fi access point , and i am connected to the modem with ethernet , i wanted to have my friend's internet so i made him connect to the AP and set my default gateway the ip address of my friend ( who is connected to the AP ) , the thing now , i ...

khialb32

hello guys ...i recently got my hands on an RB2011UiAS-RM ...and i want to use it for providing 100mbps hotspot internet , but i remarked that i can specify INCOMING/OUTGOING packet market ? is that used to allow just those packets with that mark ? and one more thing ,, can i do that using USERMANGE...

khialb32

hello guys , I've recently bought a RB2011UiAS-RM and i saw that it has 5X gigabit Ethernet ports ? but when i use the loop back address to do a bandwith test in both direction ? it gives only 100mbps as a total ? is this all the router can do and BTW i wanna use it for an Hotspot with 100 mbps ? do...

khialb32

hi guys ...i cant know the difference between the max hotspot users and max active user manger users ...are the hotspot users customers or users ? ....to make me understand ...can i use radius in a level 4 with more than 100 users for hotspot ?

khialb32

hi guys ........i am testing the x86 on a motherboard with 2 Ethernet interfaces ......i used Ethernet 1 as a DHCP client and i bridged all the rest Ethernet ports ( with are just the Ethernet 2 ) and i installed an hotspot server an bridge interface and connected to an ALFA access point long range ...

khialb32

hi guys .......i am planning to make a service on a campus ...the service includes internet and some other services hosted on local servers ...this is how i am gonna do it ....i want to do that to make different login hotspot pages for every server ( service ) ....for example if some one subscribes ...

khialb32

hi guys .......i am planning to make a service on a campus ...the service includes internet and some other services hosted on local servers ...this is how i am gonna do it ....i want to do that to make different login hotspot pages for every server ( service ) ....for example if some one subscribes ...

khialb32

hello guys ...i am a newbie in mikrotik and in networking ....so i wanted to know what does those things in softwares page means ? like MIPSBE and SMIPS and TILE ...ect ? is there some where i can find an explanation for these softwares and how to use them ?

khialb32

ah i thghouth u r using an other mikrotik router ..sorry when i saw ur pic i understood

khialb32

hello guys ....I've been wondering if i can create two hotspot server one for WAN1 and a second for WAN2 ....saying that WAN1 has internet and WAN2 has an other service lets say video streaming service or cloud service ...so it is possible and how can i do it ?

khialb32

hello guys .....i wish every one is fine ..... guys i created an hotspot with wifi APs and i am willing to put some servers on the network ( lan network ) ....what i want to do exactly is to create an other hotspot server ( and radius ) for those who wanna access the local sever ( connected directly...

khialb32

hey ....i think you wanna try to creat an other hotspot server on the wan port if possible ...may be using just one server causes the open authication to the wan port

khialb32

hello guys .....I've been searching for some way i can create vouchers so i can sell internet on cards ....it seems like the only vouchers available are those which uses random username and password ...but what i want is that the client can use his username and password ...but he can only use them a...

Search found 39 matches

Re: ROSv7.1.1 - STP wrong Port Priority with default-value (0x80)

Re: Custom Hotspot HTML Redirection is not working on v7.1

Re: v7.1.1 is released!

Re: User Manager (Radius) 7.1 migration issue

Re: 404 Not found on Hotspot Captive Portal

what happens when CHR 60 days trial is expired! [SOLVED]

TWO WIREGUARD INTERFACES WITH SAME PEER!

Re: Hotspot

Re: v7.1rc4 [development] is released!

Re: v7.1beta6 [development] is released!

Re: HEX S - User Manager (Will it be enough)

VLAN ON A BRIDGE gets IPs from an other DHCP server !

from where HOTSPOT HOSTS come from ?

are MIROTIK devices registred in Bureau of Industry and Security ?

PPPoe server doesnt stop unauthenticated people from accces

HOTSPOT mac address spoofing BREACH !!

account disconnect when sharing hotspot internet !

sudden disconnect of user using some IPs behind his IP in hotspot

Re: how to make great card design

redirect hotspot clients to a specific website ?

Re: windows applications for user management

Re: how to route packets from an ip in a network to an other ip in the same network !(with diagram ) [SOLVED]

Re: how to route packets from an ip in a network to an other ip in the same network !(with diagram ) [SOLVED]

best way to limit speeds ?

Re: how to route packets from an ip in a network to an other ip in the same network !(with diagram ) [SOLVED]

Re: how to route packets from an ip in a network to an other ip in the same network ! [SOLVED]

how to route packets from an ip in a network to an other ip in the same network !(with diagram ) [SOLVED]

marking packets from specific hotspot users profile ?

bandwidth test to the loopback ? is it the total capacity ?

is the level 4 limited to 20 users ?

one hotspot user gives access to all other devices [SOLVED]

multiple hotspots on multiple boards connected to one board ?

multiple hotspots on multiple boards connected to one board ?

mikrotik software ?

Re: Hotspot configuration

diffrent hotspot servers on same router ?

an hotspot server on a WAN port ?

Re: Hotspot configuration

usernames rechargable using vouchers ?