#notfixed - it's getting ridiculous..*) vrf - fixed VRF interfaces being moved to main table after reboot (introduced in v7.14);
*) system - expose "lo" interface;
I don't have the Wireless Wire, but a CubeG-5ac60ad kit. Both have similar hardware.
+1, it's a mess currentlyI welcome the partial split into separate packages as we knew it in v6, but maybe the "WiFi" menu should go into a separate "wifi" package so we can uninstall that as well.
..with support for QR-codes like BTH has.yes. that is a welcome addition - hopefully this will come to winbox (and maybe webgui) too
Every uplink port on every switch between the dhcp server and client needs to have trusted=yes set (both directions).it's the DHCP server itself so no interface has `trusted=yes` configured
I can only speak for a pair of Cube 60G ac we use, but they run pretty stable, just upgraded them to 7.7 a few days ago.ALL 60 GHz devices have this problem. It is not an ARM-thing
[SUM] 0.00-10.00 sec 83.2 MBytes 69.8 Mbits/sec sender
[SUM] 0.00-10.00 sec 82.8 MBytes 69.5 Mbits/sec receiver
add name=BRIDGE protocol-mode=none
I'm getting the same error on my device (arm64).not a valid dns name (6)
/tool graphing
set page-refresh=300 store-every=5min
/tool graphing resource
add allow-address=0.0.0.0/0 disabled=no store-on-disk=yes
yes, my issue is fixed with 7.2rc77.2rc6 has some fixes for redistribution of OSPF & RIP into OSPF via route filters.
/ipv6 nd
set [ find default=yes ] advertise-dns=no interface=bridge1 ra-interval=\
10s-30s
/sys watchdog/set watchdog-timer=yes automatic-supout=yes
/routing/pimsm/igmp-interface-template> print
Be careful with that last rule, if I'm reading that correctly, you're exporting a default route./routing/filter/rule/add chain=ospf-out rule="if (dst in 0.0.0.0/0 || protocol connected) {set ospf-ext-type type1; accept}"
set my NIC to a static 192.168.88.55/24
no, when I updated a CCR2004-1G-12S+2XS it turned on auto mode and I lost connectivity.*) sfp28 - changed FEC auto mode to disabled;
/ipv6/firewall/mangle> add chain=prerouting connection-mark=C_PR_VPN action=mark-routing passthrough=no new-routing-mark=VRF-VPN
+1And please give us the ability for management VRF, currently all management services only works for master instance
I'm actually trying to make it so all Windows Update traffic gets redirected to a VPN
6.47.10 does work correctly.Which version of RouterOS works correctly for igmp-snooping?
but keep in mind that you share your admin account with anyone on the internetIf you need anything MORE stable - go to Zyxel with their zyfwp.
avahi / mdns-reflection; I have to do this on a raspberry pi now. It's a necessary feature, if you separate your iot stuff from production networks.Which features are missing in your opinion?
It may worked like this in previous versions, but with 3.27 it opens up nothing.Session > new, opens up a new session, and will not save upon exit if it's not done manually.