Thanks jimbobst. Applogies but been busy these days. Reply inline: "Although it's not what I wanted it's at least working now. To sum up, having two AP running on the same subnet is not possible unless you connect a LAN cable from AsusAP LAN to hAP eth2 right?" What is it you want? I wante...

Oh, so the ASUS has clients on 192.168.5.0 network also - that's not apparent form your diagram where they seem to be using 192.168.0.x? That's your issue - trying to route to the same network in a different segment is not going to work properly - you need to rethink what you are trying to do and r...

Happy new year!! and thank you both for reply I'll reply inline: Happy New Year. My word, people do have some interesting network setups. A couple of things I can see: 1. /ip address add address= 192.168.5.2 interface=bridge network= 192.168.5.2 the ip should be 192.168.5.2/24 and network portion sh...

Hello everyone, I've been struggling quite a lot rying to configure my hAP ac^2 as a WiFi AP after my hEX S router. I've done everything what I think it's correct but it doesn't work at all :( and I'm getting crazy... This is my schema: https://i.ibb.co/V9L6PRL/2020-01-01-21-22-27-Mikro-Tik-Post-a-n...

It's finally working!! Thanks MKX for your support. There were a couple of problems, first, the dhcp from the mikrotik was missing the option for relay, and after that the dhcp on the Asus needed to be forwarded to 192.168.15.1 after that, everything worked like a charm and now I have the control ov...

Thanks MKX, I think I understood it but not able to make it work... Here's what I done so far: #remove ether from bridgeMain /ip address add interface=ether3-AsusAP address=192.168.15.1/30 #Asus will have 192.168.15.2/30 /ip route add dst-address=192.168.5.0/24 gateway=192.168.15.2 #remove existing ...

Thanks both for getting back to me now I'm even more confused :P MKX, You're right the WAN IP for the Asus is 192.168.0.2, sorry forgot to mention that. What would be the new subnet purpose for? I mean I already have the 5 subnet just to isolate Wifi subnet from cable lan. Also I'm not sure if I wou...

Apologies I deleted it due to the changes I mentioned.

Here you go.


Thanks!!

Here's my network schema

Thanks anav for getting back to me. I'll try to make a diagram of the network. In the meantime, here's my exported config. Thanks!!! EDIT: I finally have it working!! I started from installing dd-wrt on my Asus to see if I could manage something different within it. By starters I could set the Asus ...

Hi all, I'm new to networking and not so new to IT. I'm having so much trouble trying to reach one subnet from another... let me explain the "Frankenstein" that I have. Mikrotik router (hEX S) connected to Internet through SFP+ Main net is 192.168.0.0 Flags: X - disabled, I - invalid, D - ...

Hi,

Did anybody manage to get the Zisa GPON working with Movistar? If so, please do you mind to share it with us? some screenshots or some Mikrotik terminal commands would be highly appreciated.

Thanks!!

Hello everyone! I'm interested in getting rid of the "All-In-One" router from Movistar and I got excited reading this post and CarlitoxxPro&Valero's work thinking hat there's a slighyhly chance to do it. I was thinking in buying the Mikrotik SFP GPON ONU but I've seen here that there's...