Community discussions

Search found 15 matches

by h2402
Fri May 24, 2019 3:11 am
Forum: General
Topic: RB912UAG with LTE Card Huawei ME909s-120 stop working after 50MB Traffic
Replies: 14
Views: 3334

Re: RB912UAG with LTE Card Huawei ME909s-120 stop working after 50MB Traffic

I had the same problem, and (I hope) solved it by disabling WLAN. Mikrotik, is it possible that this bug still exists? CONFIRMED! I use ME909s-120 with mPCIe to USB converter on 2011UAS-2HnD with Ros: 6.44.3 I've tested ME909s-120 with FW version: 11.617.15.00.00 and 11.617.09.00.00 but i obtain "l...
by h2402
Tue May 07, 2019 12:58 pm
Forum: RouterBOARD hardware
Topic: Need 3 WiFi AC Card
Replies: 3
Views: 582

Re: Need 3 WiFi AC Card

Why Using cards in One Board and not a all Outdoor Solution like SXt / QRT / etc?
Yes, it's my actual solution but i would to centralized all in one board.
by h2402
Tue May 07, 2019 1:46 am
Forum: RouterBOARD hardware
Topic: Need 3 WiFi AC Card
Replies: 3
Views: 582

Need 3 WiFi AC Card

Hello! What routerbord can handle 3 Wi-Fi AC card?
I've saw the RBM33G, but the 3th wi-fi card is possible to connect on the m.2 slot? What are the m.2 card supported?
Thanks
by h2402
Fri Mar 16, 2018 1:02 am
Forum: Announcements
Topic: Newsletter 79 (MUM EUROPE ANNOUNCED!)
Replies: 33
Views: 12396

Re: Newsletter 79 (MUM EUROPE ANNOUNCED!)

Regarding RBM33G, is it possible to use 2 wireless cards on the 2 miniPCIe slots if someone does not need any 3G/LTE? It's not clear from the PDF and product page. Actually you can. The document had some incorrect information, we will fix the wording. Sorry about that. Hello! Can m.2 socket of rbm3...
by h2402
Thu Mar 08, 2018 4:14 am
Forum: RouterBOARD hardware
Topic: All-in-one CPE
Replies: 0
Views: 341

All-in-one CPE

Hello!
I need an Routerboard with 5GHZ 802.11ac + 2GHZ 802.11bgn + LTE.
I've seen the RB922UAGS-5HPacD that have .AC wirless inside, and with an rR11e-LTE pcie card i can use on lte Network, but missed of the 2Ghz band.
What Routerboard or setup can give me all this 3 interface?

Thanks A lot
by h2402
Sun Feb 11, 2018 7:35 pm
Forum: Beginner Basics
Topic: Vlan on RouterOS 6.41
Replies: 4
Views: 578

Re: Vlan on RouterOS 6.41

You probably have your terminology wrong. "Untagged" just means the device is plugged into a regular access port (in Cisco language), but configured to be on a certain vlan. Probably all of your devices will be plugged into untagged access ports. If you need more clarification on a tagged vs untagg...
by h2402
Sun Feb 11, 2018 7:20 am
Forum: Beginner Basics
Topic: Vlan on RouterOS 6.41
Replies: 4
Views: 578

Vlan on RouterOS 6.41

Hello!
I've never used the Vlan on the routeros, i need help to configure my lan like this scheme
Image

I've 3 WAN point, i would to separate it with vlan
How i can setup the routerboard?


Thanks a lot
by h2402
Thu Feb 08, 2018 12:19 am
Forum: Wireless Networking
Topic: Terrible NV2 Ac Network P2MP
Replies: 13
Views: 1648

Re: Terrible NV2 Ac Network P2MP

Are you running the radios at full power? Because -60 @200m seems a bit low. I'havn't no manage about power settings because in .ac device on the power section winbox can't show anything... Is the tx power set to manual tx power or regulatory domain? Tx power is set to default, i've tryed to chenge...
by h2402
Fri Feb 02, 2018 11:01 pm
Forum: Wireless Networking
Topic: Terrible NV2 Ac Network P2MP
Replies: 13
Views: 1648

Re: Terrible NV2 Ac Network P2MP

Are you running the radios at full power?

Because -60 @200m seems a bit low.
I'havn't no manage about power settings because in .ac device on the power section winbox can't show anything...
by h2402
Thu Feb 01, 2018 4:06 am
Forum: Wireless Networking
Topic: Terrible NV2 Ac Network P2MP
Replies: 13
Views: 1648

Re: Terrible NV2 Ac Network P2MP

HT MCS in .ac device is not adjustable :(
It is adjustable as soon as you downgrade the wireless band to 5GHz-A/N.
i can't configure HT MCS also in 5GHz-A/N only mode :( this .ac devices are crappy...

Image
by h2402
Wed Jan 31, 2018 3:42 pm
Forum: Wireless Networking
Topic: Terrible NV2 Ac Network P2MP
Replies: 13
Views: 1648

Re: Terrible NV2 Ac Network P2MP

One thing poped up: in nv2 you have distance set to 10km, but you said the distance is 200m max. Try adjusting that. I've setted 10 km because is the min value that winbox accept (range goes from 10 to 200). Also have a look here: try increasing period size, as in your setup number of client is fix...
by h2402
Tue Jan 30, 2018 6:07 pm
Forum: Wireless Networking
Topic: Terrible NV2 Ac Network P2MP
Replies: 13
Views: 1648

Re: Terrible NV2 Ac Network P2MP

Hi, try 802.11 instead of nv2 check you channel, with this CCQ it is not free. If you don't have a coward 80 Mhz Channel try 40 Mhz... First of all: Thanks for your reply!!! I've tryed every setting, Before in 802.11 and i've a very poor bw... Than i've switched in nstream/ nv2, in comparison nv2 g...
by h2402
Sun Jan 28, 2018 4:47 pm
Forum: Wireless Networking
Topic: Terrible NV2 Ac Network P2MP
Replies: 13
Views: 1648

Terrible NV2 Ac Network P2MP

Hello! I've bought 2 SXT HG5 AC (CLIENT) and an mANTBOX 15s (AP), this to connect 3 office building distant max 200mt each like a bridge, the office with AP have a very high floor that i can see the floor where are 2 client. I've bought this AC product because i want max troughput because i need to ...
by h2402
Fri Sep 15, 2017 8:18 pm
Forum: RouterBOARD hardware
Topic: USB Modem 4G Cat.6
Replies: 0
Views: 500

USB Modem 4G Cat.6

Hello!
I'm search the fully compatible modem 4g Cat.6 USB (or if it possible to use an adapter ex. minipci to usb) (i would attach on RB951Ui-2HnD) with Externar antenna connector and fully support of band 3, 7, 20.

Thanks
by h2402
Wed Sep 13, 2017 2:06 am
Forum: General
Topic: Renew Ip when reconnet wlan
Replies: 0
Views: 295

Renew Ip when reconnet wlan

Hello! I've setted my routerboard as CPE mode, i've selected Router mode with an dynamic Ip address. I've more than one wlan profile on connected lists, when the RB switch between profile , the ip address obtained from dhcp not renew, i must reboot the RB or press manually relase/renew button. Is po...