Community discussions

Search found 29 matches

by Melody5781
Wed Dec 26, 2018 11:53 am
Forum: RouterBOARD hardware
Topic: Connect hap ac lite to poe+ switch
Replies: 9
Views: 835

Re: Connect hap ac lite to poe+ switch

Ah,
that's a nice idea i will give it a try!
Thanks!

GSW-1600HP is the switch i prepared with this setup.
Still, you can buy adapters or you buy a UBNT PoE switch which supports passive PoE as a port option.
by Melody5781
Wed Dec 26, 2018 11:23 am
Forum: RouterBOARD hardware
Topic: Non-Microtik SFP+ DAC with CRS317... is it OK?
Replies: 5
Views: 927

Re: Non-Microtik SFP+ DAC with CRS317... is it OK?

Thank you guys very much for your responses. Would you recommend I only purchase items marked as 'Microtik" in the future, or do you think I'm safe continuing to buy these cables? It's safe to buy these cables. They have good compatibility. In a long-term, you can buy cables like ubiquiti, fs.com, ...
by Melody5781
Wed Dec 26, 2018 11:13 am
Forum: Wireless Networking
Topic: Best hardware for large 2.4GHz AP
Replies: 8
Views: 565

Re: Best hardware for large 2.4GHz AP

What's your budget? For outdoor use, you can try UAP-AC-PRO, about 120 bucks. The UniFi 802.11AC Dual-Radio APs feature the latest in Wi-Fi 802.11AC MIMO technology and supports simultaneous dual-band, 3x3 MIMO technology in the 5 and 2.4 GHz radio bands.
by Melody5781
Thu Dec 20, 2018 6:17 am
Forum: General
Topic: RouterOS on ER-X
Replies: 2
Views: 355

Re: RouterOS on ER-X

The followings are the hardware supported by RouterOS: i386 compatible architecture SMP – multi-core and multi-CPU compatible Minimum 32MB of RAM (maximum supported 2GB, except on Cloud Core devices and CHR installations, where there is no maximum) IDE, SATA, USB and flash storage medium with minimu...
by Melody5781
Thu Dec 20, 2018 6:06 am
Forum: General
Topic: PPPOE no default route for IPv6 only IPv4
Replies: 6
Views: 516

Re: PPPOE no default route for IPv6 only IPv4

It seems that your PC hasn't got the gateway. I suggest you type the gateway manually and then test the issue. Open "Network and Sharing center" > "Change adapter settings". Then right click the adapter which you used, and click "Properties" > double click "Internet Protocol Version 4 (TCP/IPV4). Af...
by Melody5781
Wed Dec 12, 2018 12:33 pm
Forum: General
Topic: the problem about that extending the port of router
Replies: 8
Views: 815

Re: the problem about that extending the port of router

Hi take one of the switch groups of 1100 and connect it to switch => you'll get 4 (5p-1p for connection to switch) + 23 (24p -1p conn) = 27p total Thank you for your reply. But I don't know how to connect pppoe through the switch port. I tried setting vlan and bridge but still couldn't connect succ...
by Melody5781
Wed Dec 12, 2018 12:21 pm
Forum: General
Topic: VLAN on a regular switch
Replies: 9
Views: 934

Re: VLAN on a regular switch

I have a router/switch/gateway and a regular ‘dumb’ switch. I’ll use VLANs. Most devices will be connected to the router. One (occasionally three) devices will be connected to the switch. Will VLAN also work for device connected to that regular switch? If not, what do I need? Thanks for explanation...
by Melody5781
Wed Dec 12, 2018 12:02 pm
Forum: General
Topic: VLAN or Subnetting
Replies: 4
Views: 563

Re: VLAN or Subnetting

Hello dear all I have may department need more IP and I want to separate their IP too such as guest wifi, accounting, MKT but I still confuse on I need to do subneting or do vlan? as your experience which is going to do? as it look it the same can divide network into other subnet same thing. Well, ...
by Melody5781
Wed Apr 25, 2018 9:11 am
Forum: General
Topic: SFP signal too strong
Replies: 9
Views: 2133

Re: SFP signal too strong

For short range, you can use this Generic Compatible 10GBASE-LRM SFP+ 220m DOM Transceiver Module.
or use this optical attenuator to reduce the power level of an optical signal, either in free space or in an optical fiber.
by Melody5781
Thu Apr 12, 2018 7:15 am
Forum: RouterBOARD hardware
Topic: S+RJ10 link speed
Replies: 3
Views: 903

Re: S+RJ10 link speed

similar problem: viewtopic.php?f=3&t=132579&p=653164&hilit=sfp#p653164
Can't verify 10 GbE throughput yet, bandwidth test doesn't get higher than 700 MBit/s.
by Melody5781
Thu Apr 12, 2018 5:08 am
Forum: RouterBOARD hardware
Topic: SFP module is extremely hot
Replies: 35
Views: 11113

Re: SFP module is extremely hot

Working temperature of SFP module:
Commercial optical transceiver: 0~70℃
Industrial optical transceiver: -40~85℃
If it works in between the range, that's normal.
by Melody5781
Fri Jan 05, 2018 5:17 am
Forum: General
Topic: Surveillance Equipment
Replies: 1
Views: 749

Re: Surveillance Equipment

Definitely PoE IP camera: https://www.fs.com/c/surveillance-3075
by Melody5781
Mon Nov 20, 2017 6:10 am
Forum: General
Topic: Mikrotik Switches Vs Cisco Switches
Replies: 20
Views: 4856

Re: Mikrotik Switches Vs Cisco Switches

I will also go with CRS326-24G-2S+RM if you need 10Gbps link. And it allows you to choose which operating system you prefer to use, RouterOS or SwOS
by Melody5781
Mon Nov 13, 2017 9:10 am
Forum: Wireless Networking
Topic: Why is MikroTik's new product—S+RJ10 10GBASE-T module so cheap?
Replies: 10
Views: 4520

Re: Why is MikroTik's new product—S+RJ10 10GBASE-T module so cheap?

200m between a pair of these at 1Gbps, or at 2.5G using STP cable. They do 10G only up to 30m so be mindful of where you want to use them.
They seem really nice though, and for that price it's really good if you want a 200m link using copper.
by Melody5781
Mon Nov 13, 2017 9:09 am
Forum: Wireless Networking
Topic: Why is MikroTik's new product—S+RJ10 10GBASE-T module so cheap?
Replies: 10
Views: 4520

Re: Why is MikroTik's new product—S+RJ10 10GBASE-T module so cheap?

200m between a pair of these at 1Gbps, or at 2.5G using STP cable. They do 10G only up to 30m so be mindful of where you want to use them.
They seem really nice though, and for that price it's really good if you want a 200m link using copper.
by Melody5781
Wed Nov 08, 2017 12:05 pm
Forum: Wireless Networking
Topic: New home wire install...CAT6, OM3, OM4..Need help...
Replies: 1
Views: 359

New home wire install...CAT6, OM3, OM4..Need help...

Building a new house, two story with a basement. Here's my initial thoughts. -RG6x2, CAT6x3 to each bedroom. -RG6x3, CAT6x4 to living room and home theatre -RG6x3, CAT6x6 to office (no need for a switch there) -CAT6x4 to attic, with PoE switch located in attic for security camera system. -Conduit fr...
by Melody5781
Wed Oct 25, 2017 7:00 am
Forum: RouterBOARD hardware
Topic: CRS109-8G-1S-2HnD-IN SFP compatibility
Replies: 4
Views: 907

Re: CRS109-8G-1S-2HnD-IN SFP compatibility

According to its product specification(https://mikrotik.com/product/CRS109-8G-1S-2HnD-IN). It comes with eight Gigabit Ethernet ports. So you can use this Gigabit SFP. Besides this you mentioned, generic 1000base SFP (http://www.fs.com/c/generic-1000base-sfp-1412) is also available~
by Melody5781
Wed Oct 18, 2017 7:14 am
Forum: SwOS
Topic: 2 x CSS326-24G-2S+RM
Replies: 12
Views: 3548

Re: 2 x CSS326-24G-2S+RM

I didn't see 2.5rc2 either. But I noticed there's version 2.6 for CSS326. Will that be helpful? This problem occured with other users as well. Did you guys call support from MikroTik?
by Melody5781
Thu Oct 12, 2017 9:34 am
Forum: RouterBOARD hardware
Topic: Usage GPON module SFP in Spain
Replies: 290
Views: 58532

Re: Usage GPON module SFP in Spain

@crc666 Agree. And I know another Chinese web site that do good at fiber optics. In many theads I have seen lists of workable transceivers with Mikrotik gears and the goods from FiberStore was among them. The owners of the other manufacturers' module reported back the testing result to confirm wheth...
by Melody5781
Wed Oct 11, 2017 9:41 am
Forum: General
Topic: Intel SFP+ support?
Replies: 14
Views: 2611

Re: Intel SFP+ support?

You got it. You only need to use compatible module on each switch, and the two connected modules need not to be the same brand. They can work together. It is the interoperability of optical devices.
by Melody5781
Tue Oct 10, 2017 6:23 am
Forum: SwOS
Topic: CSS326-24G-2S+ unable to upgrade
Replies: 10
Views: 3921

Re: CSS326-24G-2S+ unable to upgrade

"1000BASE-T SFP RJ45 transceiver can be used with CSS326-24G-2S+. Check the list below. https://mikrotik.com/product/S-RJ01 https://wiki.mikrotik.com/wiki/MikroTik_SFP_module_compatibility_table You can buy it on amazon: https://www.amazon.com/gp/product/B00N9ZI0MI/ref=oh_aui_detailpage_o09_s00?ie=U...
by Melody5781
Mon Oct 09, 2017 6:48 am
Forum: Beginner Basics
Topic: Here is my last attempt - RB3011 - No Server outbound connection
Replies: 20
Views: 1900

Re: Here is my last attempt - RB3011 - No Server outbound connection

The copper SFP RJ45 module can be used in SFP1 port. But it makes things difficult and to make things easy you can use a Cat6 Ethernet cable between the modem and the ether1.
by Melody5781
Fri Oct 06, 2017 9:39 am
Forum: General
Topic: SFP RJ45 port (S-RJ01)
Replies: 4
Views: 583

Re: SFP RJ45 port (S-RJ01)

The SFP RJ45 adapter is compatible with many network devices like Ethernet switches, Ethernet routers, NICs and media converters, just use it as a normal module, nothing special.
by Melody5781
Tue Sep 26, 2017 7:20 am
Forum: RouterBOARD hardware
Topic: CRS317-1G-16S+RM - Hardware specification
Replies: 34
Views: 7379

Re: CRS317-1G-16S+RM - Hardware specification

My CRS317 is almost silent when used below 40℃. It can work with DACs from Cisco and Dell. But I’m using more cost-effective FS SFP-10G-DAC on it. Turns out it is fully compatible and works perfectly. BTW, I was also wondering if I could use this CRS317 as core switch as I planned for a upgrade in m...
by Melody5781
Tue Sep 26, 2017 5:41 am
Forum: General
Topic: CCR1072 and 1036 using FICON protocal on SFP
Replies: 3
Views: 618

Re: CCR1072 and 1036 using FICON protocal on SFP

Maybe either the MikroTik devices or the SFP+ modules cannot support FICON. You’d better contact tech support from the two vendors for solution. I had the experience to ask for advice from Fiberstore tech team. The response is lightning fast and professional.
by Melody5781
Fri Sep 22, 2017 5:51 am
Forum: SwOS
Topic: Info: CSS326 and Ubiquiti UF-MM-10G SFP+ module working
Replies: 4
Views: 1656

Re: Info: CSS326 and Ubiquiti UF-MM-10G SFP+ module working

Yeah, just have same experience with you. FS.COM was recommended by someone on the Reddit, I bought several HP compatible SFP modules from there. Until now, they work perfect on my switch. I just found an online store with the cheapest module but high quality. http://www.fs.com/c/hp-1000base-sfp-94
by Melody5781
Thu Sep 21, 2017 11:39 am
Forum: General
Topic: Interface PPP Server side flaps/disconnects all
Replies: 6
Views: 948

Re: Interface PPP Server side flaps/disconnects all

I have a very similar problem like this and it haunted me for months. Turns out that there is something wrong with the cables.
by Melody5781
Mon Sep 18, 2017 9:53 am
Forum: Announcements
Topic: Newsletter 78 with 1GBPS WIRELESS PRODUCT ANNOUNCEMENT!
Replies: 109
Views: 29606

Re: Newsletter 78 with 1GBPS WIRELESS PRODUCT ANNOUNCEMENT!

@umraf That depends on what kind of module you are using. If you are not sure they are compatible or not, you can buy some generic modules to ensure proper connection.