Community discussions

MikroTik App

Search found 54 matches

by shivansps
Fri Aug 26, 2022 3:49 pm
Forum: General
Topic: Wireguard NAT transversal? Maybe with PPTP? [SOLVED]
Replies: 3
Views: 935

Re: Wireguard NAT transversal? Maybe with PPTP? [SOLVED]

oh, i see. I didnt need to set the endpoint ip when i set the server peers. Thanks, this is working fine. I really like the results compared to L2TP/IPSEC on the RB951/RB941/RB931 routers.
by shivansps
Wed Aug 24, 2022 5:45 pm
Forum: General
Topic: Wireguard NAT transversal? Maybe with PPTP? [SOLVED]
Replies: 3
Views: 935

Wireguard NAT transversal? Maybe with PPTP? [SOLVED]

ive been testing diferent VPNs protocols on Routerboards based on QCA9533, i have a few RB941and RB931 around. Im not expecting to break any bandwidth records with these cpus that do not support hardware crypto. They connect to a RB750Gr3, and that one do support hardware crypto for L2TP/IPsec. L2TP...
by shivansps
Wed Aug 17, 2022 8:38 pm
Forum: General
Topic: RB760iGS + TP-Link Smart Switch, traffic from VLANs on trunk port to access port go the router first
Replies: 18
Views: 2956

Re: RB760iGS + TP-Link Smart Switch, traffic from VLANs on trunk port to access port go the router first

In a few months will be moving out to a new place and im going to build the network from zero, incluiding configuration so im going to do it properly this time. Thanks for your recomendations. As for my problem, this is silly, but i figured out what the problem was, it was not the router or switch, ...
by shivansps
Mon Aug 08, 2022 5:34 pm
Forum: General
Topic: RB760iGS + TP-Link Smart Switch, traffic from VLANs on trunk port to access port go the router first
Replies: 18
Views: 2956

Re: RB760iGS + TP-Link Smart Switch, traffic from VLANs on trunk port to access port go the router first

Ill be away for the week, so ill be doing the sniff when i get back, thanks for your reply. It appears you have 12 things connected to the switch. (from the yellow and green dots) next to the ports in the GUI. When you post the startup-config, can you also let us know what port(s) are connected to t...
by shivansps
Sun Aug 07, 2022 7:47 pm
Forum: General
Topic: RB760iGS + TP-Link Smart Switch, traffic from VLANs on trunk port to access port go the router first
Replies: 18
Views: 2956

Re: RB760iGS + TP-Link Smart Switch, traffic from VLANs on trunk port to access port go the router first

Please ignore the advice to avoid VLAN 1. The rationale behind that advice is that rumor has it that some equipment uses it in a special way. I'd love to see an example of such an equipment, where this "special treatment of VLAN 1" would not be just a result of a misconfiguration/misunder...
by shivansps
Sat Aug 06, 2022 6:23 pm
Forum: General
Topic: RB760iGS + TP-Link Smart Switch, traffic from VLANs on trunk port to access port go the router first
Replies: 18
Views: 2956

Re: RB760iGS + TP-Link Smart Switch, traffic from VLANs on trunk port to access port go the router first

I didnt posted the complete config because it is quite complicated as i have hotspot and a l2tp server, wan failover lots of firewall rules for port forwarding as well... But here it is. The sfp1 is not used, i realised that on the RB760 the sfp port is half speed, so using a regular ethernet port i...
by shivansps
Sat Aug 06, 2022 4:23 am
Forum: General
Topic: RB760iGS + TP-Link Smart Switch, traffic from VLANs on trunk port to access port go the router first
Replies: 18
Views: 2956

RB760iGS + TP-Link Smart Switch, traffic from VLANs on trunk port to access port go the router first

This is likely a switch configuration issue, but i wanted to ask here as maybe i have a bad configuracion on the router. The setup i have a is actually a very simple one, VLAN 1 is untagged on the bridge, this is the router native vlan, and then i added a bunch of different vlans with different netw...
by shivansps
Tue Dec 22, 2020 1:37 pm
Forum: General
Topic: RB760iGS - Very Slow transfer speeds vlan to vlan and cpu usage is just 30%
Replies: 7
Views: 2582

Re: RB760iGS - Very Slow transfer speeds vlan to vlan and cpu usage is just 30%

Ok, after disabling the sfp port and move the trunk to a ethernet port now i get about 280Mbits/s on single conection and about 480Mbits/s with 4 parallel streams. I think this is the most i can get out of the little Hex S and this is fine because Windows actually does this if you have multiple nics...
by shivansps
Sun Dec 20, 2020 5:43 am
Forum: General
Topic: RB760iGS - Very Slow transfer speeds vlan to vlan and cpu usage is just 30%
Replies: 7
Views: 2582

Re: RB760iGS - Very Slow transfer speeds vlan to vlan and cpu usage is just 30%

Ether3 is just another bridge port with ID=1 like all others but it has no tagged traffic on it, so you dont see it on the export because it just has the default dynamic vlan ID 1 untagged setting. From what I tried a year ago ( this post and this post ), hEX S is nice, but not exactly performance b...
by shivansps
Sat Dec 19, 2020 3:36 pm
Forum: General
Topic: RB760iGS - Very Slow transfer speeds vlan to vlan and cpu usage is just 30%
Replies: 7
Views: 2582

RB760iGS - Very Slow transfer speeds vlan to vlan and cpu usage is just 30%

Im having a medium to large setup here, as this RB760 handles 7 vlans and is a l2tp server. This is the configuration im using. /interface bridge add admin-mac=C4:AD:34:F2:8C:C6 auto-mac=no name=bridge vlan-filtering=yes /interface ethernet set [ find default-name=ether1 ] name=ether1-Modem set [ fi...
by shivansps
Tue Nov 10, 2020 6:57 pm
Forum: General
Topic: Two routers, 2 places, 2 internets with CPEs, what is the best way? [SOLVED]
Replies: 15
Views: 2045

Re: Two routers, 2 places, 2 internets with CPEs, what is the best way? [SOLVED]

It looks like the traffic is getting dropped right were it should be going to the VLAN that goes out, but im not really sure why. Try to disable the chain=forward action=drop connection-state=invalid rule. I never tried whether a ping response for which no request was seen is considered connection-...
by shivansps
Tue Nov 10, 2020 6:04 pm
Forum: General
Topic: Two routers, 2 places, 2 internets with CPEs, what is the best way? [SOLVED]
Replies: 15
Views: 2045

Re: Two routers, 2 places, 2 internets with CPEs, what is the best way? [SOLVED]

It looks like the traffic is getting dropped right were it should be going to the VLAN that goes out, but im not really sure why.
by shivansps
Mon Nov 09, 2020 10:27 pm
Forum: General
Topic: Two routers, 2 places, 2 internets with CPEs, what is the best way? [SOLVED]
Replies: 15
Views: 2045

Re: Two routers, 2 places, 2 internets with CPEs, what is the best way? [SOLVED]

https://i.imgur.com/h01gbTr.png i tried both ways with the same results. In attaching the full configs. # model = RB760iGS /interface bridge add admin-mac=C4:AD:34:F2:8C:C6 auto-mac=no name=bridge vlan-filtering=yes /interface ethernet set [ find default-name=ether1 ] name=ether1-Modem set [ find d...
by shivansps
Mon Nov 09, 2020 7:13 pm
Forum: General
Topic: Two routers, 2 places, 2 internets with CPEs, what is the best way? [SOLVED]
Replies: 15
Views: 2045

Re: Two routers, 2 places, 2 internets with CPEs, what is the best way? [SOLVED]

Ok i removed a bit of stuff because it was way too long with L2TP and hotspots and some extras. This is at site 1, it has VLANs from 100 to 140, vlan 200 comes from site 2 Vlan 130 is 192.168.85.0/24 /interface bridge add admin-mac=C4:AD:34:F2:8C:C6 auto-mac=no name=bridge vlan-filtering=yes /interf...
by shivansps
Mon Nov 09, 2020 6:02 pm
Forum: General
Topic: Two routers, 2 places, 2 internets with CPEs, what is the best way? [SOLVED]
Replies: 15
Views: 2045

Re: Two routers, 2 places, 2 internets with CPEs, what is the best way? [SOLVED]

i got stuck in the configuration, the vlans are added to both routers, and assigned to lan list, if i set a dhcp client on any of them i get an ip. Both routers can ping any device IP on the other site, but i cant make pcs on for example 192.168.90.0/24 on site 1 ping pcs on 192.168.88.0/24 on site ...
by shivansps
Mon Nov 09, 2020 2:18 pm
Forum: General
Topic: Accidentally assigned wrong gateway to EAP
Replies: 2
Views: 418

Accidentally assigned wrong gateway to EAP

I was in the middle of chaging my EAP network and i accidentally saved

IP:192.168.89.3
Gateway: 192.168.88.1

The EAP is on a very high roof, there is some way to temporary allow this to work so i can log in and change it?
by shivansps
Sun Nov 08, 2020 5:38 pm
Forum: General
Topic: Two routers, 2 places, 2 internets with CPEs, what is the best way? [SOLVED]
Replies: 15
Views: 2045

Re: Two routers, 2 places, 2 internets with CPEs, what is the best way? [SOLVED]

The CPEs are TP-Link but they carry the VLAN-Tagged frames over the wireless link. So the best way is to have all vlans added to both routers with vlan filtering and send all over the cpe link, and use EOIP interface instead of a vlan for sensitive traffic. Yes i do have conflicting networks and vla...
by shivansps
Sun Nov 08, 2020 3:43 am
Forum: General
Topic: Two routers, 2 places, 2 internets with CPEs, what is the best way? [SOLVED]
Replies: 15
Views: 2045

Two routers, 2 places, 2 internets with CPEs, what is the best way? [SOLVED]

Hi, im wanted to ask because im in this situacion were i have two places connected with a point to point CPE. What i want to do is to allow for internet sharing so if the internet goes out in one site, it uses the internet of the other one, and to be able to access the the servers on site 1 from sit...
by shivansps
Mon Feb 24, 2020 5:17 pm
Forum: General
Topic: Should i use bridge VLANs for my network?
Replies: 5
Views: 2006

Re: Should i use bridge VLANs for my network?

Ill need to check if the managed switch has no issues with not having a ID 1 first, it is very old. Now that ive been reading that and the mikrotik page about potential issues of bridging vlans like im doing i wonder if this is the reason of why im having so many issues with the ip cams, some of the...
by shivansps
Sun Feb 23, 2020 3:15 pm
Forum: General
Topic: Should i use bridge VLANs for my network?
Replies: 5
Views: 2006

Re: Should i use bridge VLANs for my network?

i see, i think i understand, one bridge with all vlans attached to it, have the address, interface list, dhcp server, etc running directly on the vlan. Vlan Interfaces: vlan1-Sales (ID 100) vlan2-Employees (ID 200) vlan3-Clients (ID 300) vlan4-Cameras (ID 400) All attached to "Bridge1-Admin&quo...
by shivansps
Sat Feb 22, 2020 7:26 pm
Forum: General
Topic: Should i use bridge VLANs for my network?
Replies: 5
Views: 2006

Should i use bridge VLANs for my network?

Hi, im wanted to ask this because im now reading about port vlans and bridge vlans and i still not fully understand how bridge vlans work or how to properly configure it. What i have right now i belive is called port vlans. Im using a RB750GR3 for a office/store with 5 networks, dual wans and L2TP V...
by shivansps
Sat Nov 02, 2019 2:18 am
Forum: RouterOS beta
Topic: v7 has conditional DHCP options and EAP enabled user-man?
Replies: 1
Views: 3542

v7 has conditional DHCP options and EAP enabled user-man?

This is a question to the people testing RouterOS v7, there are conditional DHCP options allowing network boot of UEFI and legacy systems whiout having to go and change the filename or next server ip manually? Like the one requested here https://forum.mikrotik.com/viewtopic.php?t=95674 ? Is user-man...
by shivansps
Fri Nov 01, 2019 6:22 pm
Forum: The User Manager
Topic: Using UserManager as RADIUS for other AP
Replies: 28
Views: 51577

Re: Using UserManager as RADIUS for other AP

Yup, just tried is not possible to use userman to as a radius server for wireless clients. No EAP-TLS, EAP-SIM, EAP-AKA, PEAP, LEAP or EAP-TTLS support.
by shivansps
Mon Oct 14, 2019 6:06 pm
Forum: General
Topic: VOIP/UDP connections failling to terminate after wan failover
Replies: 2
Views: 1844

Re: VOIP/UDP connections failling to terminate after wan failover

So i have to have a script runing very minute to check if the gateway has changed to remove ALL UDP connections? And this is not considered a bug? wha...? Ok i got the script up and running, it works, but why?... im using masquerade why on earth i need to do this with a script? It should be auto cle...
by shivansps
Thu Oct 10, 2019 8:51 pm
Forum: General
Topic: VOIP/UDP connections failling to terminate after wan failover
Replies: 2
Views: 1844

VOIP/UDP connections failling to terminate after wan failover

Im using advanced 2 wan failover as showed in this example https://wiki.mikrotik.com/wiki/Advanced_Routing_Failover_without_Scripting But im having a severe issue, if the WAN1 goes down, it switchs to WAN2, thats OK, but after doing that all UDP connections that were trought WAN1 fail to close, this...
by shivansps
Thu Oct 10, 2019 8:43 pm
Forum: General
Topic: No internet if there is not a route whiout a routing mark
Replies: 2
Views: 1425

Re: No internet if there is not a route whiout a routing mark

I ended up fixing it by adding another set of rules whiout the routing mark /ip route add distance=1 gateway=Host1 check-gateway=ping add distance=2 gateway=Host2 check-gateway=ping For the record, the wiki is not very clear what this /ip route add distance=1 gateway=Host1 routing-mark=ISP1 check-ga...
by shivansps
Wed Oct 09, 2019 6:27 pm
Forum: General
Topic: No internet if there is not a route whiout a routing mark
Replies: 2
Views: 1425

No internet if there is not a route whiout a routing mark

Hi, in trying to setup a better WAN failover using this guide: https://wiki.mikrotik.com/wiki/Advanced_Routing_Failover_without_Scripting Just the basic setup, so far so good, i have that set up, using 1.1.1.1 and 8.8.4.4 as hosts i also have a DHCP lease script running to update the gateways on the...
by shivansps
Sun Sep 29, 2019 9:55 pm
Forum: General
Topic: How exactly this works? dstnat to external ip
Replies: 3
Views: 1209

Re: How exactly this works? dstnat to external ip

It's simple, dstnat changes destination address, so when they connect to you, their packets are redirected to target server. And since you also have srcnat/masquerade on WAN interface, and it's clearly not limited only to connection from your LAN, you created a variant of hairpin NAT config. So fro...
by shivansps
Sun Sep 29, 2019 6:27 pm
Forum: General
Topic: How exactly this works? dstnat to external ip
Replies: 3
Views: 1209

How exactly this works? dstnat to external ip

This is something i did not realised that can be done. My friends and i were playing in a Arma 3 server a few days ago, and 3 of them had problems conecting to the server due to very high packet loss, so out of the "im out of ideas lets try this" i did a firewall rule to dstnat all the por...
by shivansps
Sun Jul 07, 2019 2:56 am
Forum: General
Topic: Im having issues with UDP conns for VOIP being unreliable.
Replies: 4
Views: 4516

Re: Im having issues with UDP conns for VOIP being unreliable.

Thanks, ill look into that. But im going to be away for the next week now. The issue is now getting worse, i fixed remote extensions problems by switching to TCP for sip register, the SIP Trunk registration now it SEEMS to work on my main wan, ive added a mangle rule to "passtrought" all c...
by shivansps
Sun Jun 23, 2019 11:48 pm
Forum: General
Topic: Im having issues with UDP conns for VOIP being unreliable.
Replies: 4
Views: 4516

Im having issues with UDP conns for VOIP being unreliable.

This is something that i cant figureout what is going on and its really driving me crazy. I have a very simple setup, 2 gateways with diferent distance so it works as a failover, 2 networks and 2 switchs, one for each. Recently we started using a sip trunk on our 3CX server, i just cant use my main ...
by shivansps
Wed May 15, 2019 3:41 pm
Forum: General
Topic: RB750GR3 for a 30 PCs Gaming event?
Replies: 11
Views: 3305

Re: RB750GR3 for a 30 PCs Gaming event?

I get it, thanks. The other option what i dont think is better, i would rather do load balancing, the PPC method should work, But the other thing i was thinking is disable fastrack only for port 5, connect 20 pcs on it and then use mangle rules to force those 20 ips to go trought the other 2 gateways.
by shivansps
Wed May 15, 2019 4:11 am
Forum: General
Topic: RB750GR3 for a 30 PCs Gaming event?
Replies: 11
Views: 3305

Re: RB750GR3 for a 30 PCs Gaming event?

The games are going to be Fortnite, LOL and CS:GO, 10 pcs for each. Fortnite is by far the harder one. CS.GO dont uses much, and im not sure about LOL.
by shivansps
Tue May 14, 2019 6:45 pm
Forum: General
Topic: RB750GR3 for a 30 PCs Gaming event?
Replies: 11
Views: 3305

RB750GR3 for a 30 PCs Gaming event?

Hi guys, we are planing a one time gaming event and i need to decide on the router... i need to set up a router with load balancing of 3 ISPs, one with 300MB/15MB, other with 100MB/8MB and finally 100MB/5MB. Do you think the RB750GR3 is up to the task? The most important thing for this is balance th...
by shivansps
Fri Dec 28, 2018 11:29 pm
Forum: General
Topic: [Feature request] conditional dhcp options
Replies: 24
Views: 15964

Re: [Feature request] conditional dhcp options

You can use DHCP option 67 to change the boot file name, in fact ive been using that to easily change PXE and UEFI boot mode from winbox, and yes you can set a dhcp option to one filename and having a dhcp option set pointing to the other one(what i think he was missing on the last command) active a...
by shivansps
Tue Apr 24, 2018 5:30 pm
Forum: Beginner Basics
Topic: How to force the built-in proxy server/hotspot to use 2nd wan? [SOLVED]
Replies: 3
Views: 2427

Re: How to force the built-in proxy server/hotspot to use 2nd wan? [SOLVED]

Yes... this did the trick, thank you. 11 chain=output action=mark-routing new-routing-mark=speedywifi passthrough=no protocol=tcp dst-port=80 log=no log-prefix="" 12 chain=output action=mark-routing new-routing-mark=speedywifi passthrough=no protocol=tcp dst-port=443 log=no log-prefix=&quo...
by shivansps
Tue Apr 24, 2018 4:59 pm
Forum: Beginner Basics
Topic: How to force the built-in proxy server/hotspot to use 2nd wan? [SOLVED]
Replies: 3
Views: 2427

Re: How to force the built-in proxy server/hotspot to use 2nd wan? [SOLVED]

Sure. Routes [admin@MikroTik] > ip route print Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, B - blackhole, U - unreachable, P - prohibit # DST-ADDRESS PREF-SRC GATEWAY DISTANCE 0 A S 0.0.0.0/0 PPPoE-Speedy 10 1 ADS 0.0.0.0/0 190.17.136.1...
by shivansps
Mon Apr 23, 2018 8:00 pm
Forum: Beginner Basics
Topic: How to force the built-in proxy server/hotspot to use 2nd wan? [SOLVED]
Replies: 3
Views: 2427

How to force the built-in proxy server/hotspot to use 2nd wan? [SOLVED]

Righty now a have a setup with 2 wans and failover and i can force any ip i want on my network to use the 2nd wan gateway using mark routing.

But ill like to run the proxy server and hotspot but only using wan 2, not the primary wan.
by shivansps
Fri Dec 01, 2017 3:38 pm
Forum: General
Topic: Request : Client System Architecture Type Option Definition
Replies: 4
Views: 4497

Re: Request : Client System Architecture Type Option Definition

I know this is old, but i would like to see it done. I have both UEFI and legacy boot on my network and so far the only possible workaround is to change the file manually at the tftpd server.
by shivansps
Thu Oct 12, 2017 2:55 am
Forum: General
Topic: Routing Interface or ip to WAN2 PPPoE client super slow if main gateway is still active
Replies: 4
Views: 1605

Re: Routing Interface or ip to WAN2 PPPoE client super slow if main gateway is still active

Ive contacted support, the problem was the default fastrack rule that was still active.
by shivansps
Wed Oct 04, 2017 2:20 am
Forum: General
Topic: Routing Interface or ip to WAN2 PPPoE client super slow if main gateway is still active
Replies: 4
Views: 1605

Re: Routing Interface or ip to WAN2 PPPoE client super slow if main gateway is still active

Im at a dead end, petty much everything ive searched about policy routing and routing Ips to 2 wan tells me that i only need a static gateway, a nat using that interface and a mangle rule to mark routing.

I really need to get this working.
by shivansps
Tue Oct 03, 2017 8:21 pm
Forum: General
Topic: Routing Interface or ip to WAN2 PPPoE client super slow if main gateway is still active
Replies: 4
Views: 1605

Re: Routing Interface or ip to WAN2 PPPoE client super slow if main gateway is still active

Now for example, i added a mangle route to pass my pc to the ISP 2 on PPPoE... chain=prerouting action=mark-routing new-routing-mark=speedywifi passthrough=no src-address=192.168.0.40 log=no log-prefix="" i open speedtest in a browser, it does detect the correct ISP 2 public IP, ping is go...
by shivansps
Tue Oct 03, 2017 5:07 pm
Forum: General
Topic: Routing Interface or ip to WAN2 PPPoE client super slow if main gateway is still active
Replies: 4
Views: 1605

Routing Interface or ip to WAN2 PPPoE client super slow if main gateway is still active

This is my setup /ip firewall nat ;;; fibertel chain=srcnat action=masquerade out-interface=ether1-Fibertel log=no log-prefix="" ;;; speedy wifi chain=srcnat action=masquerade routing-mark=speedywifi src-address=10.5.50.0/24 out-interface=PPPoE-Speedy log=no log-prefix="" ;;;spee...
by shivansps
Tue Oct 03, 2017 2:04 am
Forum: General
Topic: Hotspot can get internet from a diferent gateway?
Replies: 1
Views: 819

Hotspot can get internet from a diferent gateway?

It is possible to change it so instead of using the main enabled gateway for internet, to use a secondary gateway for internet? Like the one i use for failover? I know it can be done using a external proxy for example, but then i have no idea of how website control whould work. i whould preffer to u...
by shivansps
Tue Oct 03, 2017 1:56 am
Forum: Beginner Basics
Topic: 2nd gateway as failover AND mark routing?
Replies: 4
Views: 1822

Re: 2nd gateway as failover AND mark routing?

For ISP 1: A DHCP client running on ether1 port, enable "add default route" and set a distance of 2. For ISP 2: A PPPoE Client running on ether5 port (by default is set as slave port, so remember to set Master port to "none" in its interface first), enable "add default route...
by shivansps
Mon Oct 02, 2017 7:40 pm
Forum: Beginner Basics
Topic: 2nd gateway as failover AND mark routing?
Replies: 4
Views: 1822

Re: 2nd gateway as failover AND mark routing?

nevermind, ive already figured it out, ive added a static route that uses "PPPoE-ISP2" as the gateway, and that is one using mark routing.
by shivansps
Mon Oct 02, 2017 7:10 pm
Forum: Beginner Basics
Topic: 2nd gateway as failover AND mark routing?
Replies: 4
Views: 1822

2nd gateway as failover AND mark routing?

Ok right now i have a: ISP 1: DHCP client running on ether1, with distance 1, and ive added a routing filter to enable check gateway. ISP 2: PPPoE client running on ether5 with distance 3. So far so good, the failover is working, but i want a certain ip to run ONLY on ISP 2. I could add a mark routi...
by shivansps
Fri Sep 29, 2017 6:41 pm
Forum: General
Topic: 2 gateway failover 2nd gateway is not enabled
Replies: 1
Views: 856

2 gateway failover 2nd gateway is not enabled

In WAN i have a dynamic DHCP Client, ive enabled a filter rule to add "check gateway" on it. The 2nd gateway is inside the LAN, this is because there is an option on the pcs to manually switch gateways in order to use the other ISP if they wish. So, Gateway 1 = dhcp client with check gatew...
by shivansps
Fri Sep 29, 2017 3:19 am
Forum: Beginner Basics
Topic: Disable wlan2 if Gateway 1 is down
Replies: 0
Views: 542

Disable wlan2 if Gateway 1 is down

This can be done? maybe using scritps? right now wlan 2 is a virtualAP whiout password in order to allow clients to get free internet, and is using my auxiliary gateway... my main gateway is only used for my internal network, BUT if gateway 1 is down, gateway 2 is used, at this point i dont want any...
by shivansps
Wed Sep 27, 2017 4:20 am
Forum: Beginner Basics
Topic: Help understanding how Hotspot work and how to control it
Replies: 0
Views: 632

Help understanding how Hotspot work and how to control it

Hi, this is what i want to do. https://i.imgur.com/gLtyhPL.png So in preparation to that, i set up a VirtualAP with the secondary SSID, a IP pool, a secondary DHCP server to run on that interface (10.5.50.0 network, 10.5.50.2-10.5.50.254 pool, gateway and dns = 10.5.50.1, the image is wrong). I adde...
by shivansps
Sat Sep 23, 2017 5:24 am
Forum: Beginner Basics
Topic: "Connection Closed" with a Hotspot setup using another gateway, and gateway failover
Replies: 1
Views: 895

Re: "Connection Closed" with a Hotspot setup using another gateway, and gateway failover

Image

Ok that is what i want to do, ive trying but have no success so far.
by shivansps
Fri Sep 22, 2017 1:42 am
Forum: Beginner Basics
Topic: "Connection Closed" with a Hotspot setup using another gateway, and gateway failover
Replies: 1
Views: 895

"Connection Closed" with a Hotspot setup using another gateway, and gateway failover

Hi, Ill start explain my setup. ether-1: Fiber modem on bridge mode, it gets ip from a dhcp client. ether2-4 : Lan (192.168.0.0), 192.168.0.1 is the router IP. ether5: ADSL modem, in router mode, it has DHCP server disabled and a static ip of 192.168.0.2. wlan1: bridged with ether ports. there is a ...