MikroTik

Askey307

Did you read this thread?
viewtopic.php?t=166748

Yeah, I did. The solutions provided, non 3rd party wise, does work for browser based streaming but proves ineffective to block the Mobile Apps. So in short, Mobile apps proves to be a headache with Mikrotik.

Askey307

Good Day All Is there an updated method to block Youtube as an app on both Android and iOS via a Mikrotik and not an external service? The current rules I have block browser based entries without an issue but mobile seems to still work. I've tried Layer 7, Mangle, TLS, Address List Entries etc but m...

Askey307

Good Day Is there anyway to effectively log usage to Destination IP's on WAN on the Mikrotik itself instead of using an external gatherer or SNMP client such as PTRG or a content manager? I've played with IPFIX, Graphing, Monitoring but doesn't seem to do the job well enough. We basically want to do...

Askey307

Wow, cannot believe I overlooked that. Was in quite a rush and stressed a bit when seeing these two adresses. How weird indeed. Only popped up like, to my knowledge, today. Been using normal Google DNS as static for almost a year.

Weird that it write it backwards.

Thanx for the info.

Askey307

Good Day I've been getting the above stated IP (1.10.168.192) under my DNS Cache as well as an old IP range but "Allow remote requests" are not enabled. These 2 IP's keep refreshing to 1day lease after every 5 seconds. S 1.10.168.192in-addr.arpa PTR S 192.168.10.1 A Flush cache does nothin...

Askey307

Hi Guys So I've been doing pen testing labs on my Mikrotiks. See list of variants below. The one attack which I can't really find a reliable answer/solution for is "MAC Flooding" on a router network without a switch. Mikrotiks: * CCR1009 * RB2011 * RB952 v2 * RB750Gr3 Pen testing tool: &qu...

Askey307

Interesting, could you share any more details? I don't mean step by step guide, although I suppose someone would appreciate that. Just some pointers for start, like what do you use? I most likely won't be trying it myself, I'm just curious. I keep finding some software named ExaGear, but it seems d...

Askey307

The 80 range is a VSAT 550ms+ range. The sniffer says the response from the 80.3 arrives 40-60 ms after the request is sent in the opposite direction. But as you mention there's a VSAT link in the path, 40-60 ms is mission impossible, so could it actually be 1040-1060 ms (i.e. response to request N...

Askey307

I can even open the NMS on 80.3 without an issue but cannot ping it. ... Sniffer also get response from 80.3 Do I read you right that the sniffer shows an ICMP response from the 80.3 but the client cannot see it? I.e. the response doesn't make it through the Mikrotik to the client? Aaaaand there it...

Askey307

I can even open the NMS on 80.3 without an issue but cannot ping it. ... Sniffer also get response from 80.3 Do I read you right that the sniffer shows an ICMP response from the 80.3 but the client cannot see it? I.e. the response doesn't make it through the Mikrotik to the client? Yeah you did rea...

Askey307

It's strange, as everything looks fine in your configuration. The routes are there, the masquerade rule is there (it could be more selective but it doesn't cause any trouble as-is given the rest of the configuration). So try pinging something in the 192.168.80.0/24 range that you know to respond, f...

Askey307

The quality of an answer depends on the quality of the question. So to get any useful advice, post your configuration in text form, following the anonymisation hint in my automatic signature right below. Screenshots are useless for any analysis, and yours in particular just show that it doesn't wor...

Askey307

Hi guys Having a little bit of an issue. Cisco got damaged and had to replace it with RB2011 laying around. My issue I'm having is that I have to connect to office network via L2TP. My main internet WAN connection is via PPPoE. Up to the Mikrotik, everything works and I can ping local ranges at the ...

Askey307

Managed to get it to work on a RP 4 with Raspbian and VM. No issues yet. Works actually pretty well tbh. Just had heat issues at first but that's sorted.

Askey307

Hi Guys Is it possible to run CHR on a Pi without having to install any OS like linux to run a VM? The idea is the have a small foot print of a device in the office for our site monitoring with the Dude. We're currently running it on an old DDR2 machine and the boss does not want to buy a router spe...

Askey307

Good Day Per your opinion, how many simultaneous connections (IP's) can the Mikrotik RB951G handle via LAN? Topology Modem -->RB951G-->Switch--->3x Unifi UAP Mesh Pro Subnet --> /24 considering /23 as the pool get's used quickly. Current solution was to drop the lease time to like 30 minutes to 1 ho...

Askey307

Yeah, why not. See attached the file:):) 4M 30 Gig Cap Daily FUP for Scheduler (1).txt #### Script Name: SiteID-ReadBytes #### #This first script is scheduled to run every 15 minutes. It collects the traffic of VLAN1700 (sums up tx and rx bytes) #and writes different data to multiple files. # ######...

Askey307

Good Day I need some assistance with a script of mine. Basically it is a Fair Usage Policy Script with usage cap as well on 24 hours. Currently everything is working, however, the one thing that baffles us is how to carry over left over cap/data to the next day. Let's say you have 1gb of data for 24...

Askey307

Hey Guys Anyone know of software that can run a virtual environment like Cisco Packet Tracer but with Mikrotik config etc that I can use for training and sharpening my skills and set up testing labs before I go to clients and know that the config will work? Not sure if GNS can do Mikrotik? Kind Rega...

Askey307

You didn't state your bandwidth, but generally the RB2011 is not fast enough. Use the hAP AC2 or RB4011 . Then you can throw QoS rules at it and it won't bog down under load. Hi Ah damn, it's just a 10mbps down and 5mbps up fibre. Im the only user. The 2011 and few other RB's like the 941/951 has b...

Askey307

;Good Day Guys What config do you guys use for gaming? My environment is as follow? Bandwidth: Fibre 10/5mbps Users: Only me. Priority: Gaming Hardware: RB2011UAiS-2hnd Topology: ISP-ONT-RB2011-Ruckus AP Wireless Needed: NO, the router will not deal with the wireless, it will be switched off. Gaming...

Askey307

Not sure if you read the thread properly, however, we're also both and all of us are at least up to MTCRE. I also cannot share the config of our clients due to a Non-Disclosure agreement. This is companies that's been using these units quite a lot, we talk few thousands of the routers especially th...

Askey307

Hi Since the last update we have had multiple clients complaining about existing sites where VoIP experiences issues, from de-registration, no audio, one way audio. Currently we downgrading the clients back to 6.43.8 which works. I've sent multiple supouts and support tickets to Support with no fee...

Askey307

Hi Since the last update we have had multiple clients complaining about existing sites where VoIP experiences issues, from de-registration, no audio, one way audio. Currently we downgrading the clients back to 6.43.8 which works. I've sent multiple supouts and support tickets to Support with no fee...

Askey307

Hi Since the last update we have had multiple clients complaining about existing sites where VoIP experiences issues, from de-registration, no audio, one way audio. Currently we downgrading the clients back to 6.43.8 which works. I've sent multiple supouts and support tickets to Support with no feed...

Askey307

Hi Normis

A bit more info would be appreciated. We also have quite few clients that runs 24v DC and 24v PoE up their units for redundancy. Never have we had problems that the units does not work, power failures or "burned" units.

Askey307

Ok so after upgrading from 6.43 to 6.43.2 the problems ceased. It gets decent throughput and performance but still not compared to a RB941's throughput performance with the exact same settings and firmware. Have you actually tried Nest's suggestion? What that guy doesn't know about WiFi isn't worth...

Askey307

Ok so after upgrading from 6.43 to 6.43.2 the problems ceased. It gets decent throughput and performance but still not compared to a RB941's throughput performance with the exact same settings and firmware.

Askey307

HI

So here in South Africa MT get's utilized a lot. I work a big Mikrotik Distributor. Can't give out customer information, but I can say that we sell tons of Mikrotiks and the people love it. UBNT and MT is on par almost in South Africa.

Askey307

HI Normis

This will help us here at MIRO Distribution so much with technical support for clients on the wireless without sending the supout rif files up to MIkrotik when needed. Much appreciated.

Askey307

It's still a fairly simple concept that the blurb explains... You choose your control (main) frequency and decide if you want extension to go above/below it. XX for auto-selection so it actively avoids noisy neighbours. XX is probably better for noisy/changing environments, eC vs Ce is purely based...

Askey307

Do some simple research you will find your answers - especially in the Mikrotik wiki/Manual From https://wiki.mikrotik.com/wiki/Manual:Interface/Wireless Use of extension channels (e.g. Ce, eC etc) allows additional 20MHz extension channels and if it should be located below or above the control (ma...

Askey307

Good Morning

What is the difference between the eC, Ce, eeeC, eCee and XX? When would I use which and how can I advice clients which is the best to make use of.

Kind Regards

Askey307

We also found yesterday that a cheap TP-Link and Tenda router with 2db antennas have better signal strength when connecting to another "Unnamed Router" with a 1.5db antenna as a bridge connection over 43 meters. With a latency of 1-2ms and signal strength of -59 where 2011 connects at -72 ...

Askey307

I can see the problem immediately. You are running far too high a transmitter power, setting all data rates to use the same high power regardless of MCS rate and as a result the transmissions are all going out distorted (google EVM) causing even short distance and nearby located devices from not wo...

Askey307

Good Day Everyone Need help with improving the throughput on this board's wireless. Currently, next to it (2m radius), people get maximum 34mbps download and 15mbps upload. One device at a time. After 10 meters one barely get 1mbps download. This test has been conducted in high interference areas (-...

Askey307

Good Day Guys I would truly appreciate everyone especially Mikrotik's input on this. What are popular scripts that you guys use in the following scenario's: * ISP/WISP * SOHO * Gaming Router * VoIP * Fail Over (WAN1/WAN2) * Reporting * Anti-Hacking Trying to do a survey here in technical MIRO Distri...

Askey307

Hi Guys Just had to post this. Our clients are buying this CAP AC like crazy. They love it. One client reported to have 48 connections and everyone still achieving speeds of 95mbps plus of which some even got 169mbps on a 200mbps down and 200mbps up fiber line. Love this device a lot. Thank you Mikr...

Askey307

Good Morning Everyone So here at MIRO Distribution, South Africa, we sold quite a bit of these CAP AC's and the clients love them. They do however prefer the square cover over the round one. Well done on this beast of an AP for its price. Only thing now they want is proper seamless roaming/handover/...

Askey307

Maybe you have this feature turned off on the particular interface?

Post results of:

"/tool mac-server mac-winbox export"
"/ip neighbor export"

Does this computer interface have an IP address set on it or not ?

Will post the results to you asap. Thank you.

Askey307

Why can't they just build it in java that is supported by all platforms haha. Winbox was pure JAVA app until v2.4 actually. We ourselves use Winbox in Wine, it works great. It works great when using the IP but it does not discover any devices and layer 2 login does not work. Both my Arc and Ubuntu ...

Askey307

Apologies for not replying on my previous posts. Been out of the country for a while. Seems like our technical team had a lot of problems with clients and their wireless devices on 6.41.2 and 6.41.3 where it has horrible TX and Rx signal strength, throughput and instability. Before 6.42 we downgrade...

Askey307

Thats funny! RouterOS is linux based but management software ( winbox) available only for windows. :)) Sent from my C6833 using Tapatalk I've just had a big LOL on your comment. Same with a lot of brands. Controllers and software are linux based and the discovery tools etc are windows. Why can't th...

Askey307

Have you actually connected Windows device instead of Linux machine and tested this? Maybe simply ND is disabled on RouterBOARDs in your network. We are not aware about any issues with Winbox discovery neither on Windows, Linux or Mac. Mikrotik's work great. I've tested with Arch, Mint and Ubuntu. ...

Askey307

I don't understand you at all :D Why did you write that equipment models, if you don't use it ? Someone asked what wireless cards I have in my laptop so I just mentioned both for record sake. Give the list of the phones then, which have low speed. This is what I am trying to ask you! Firmware 6.40....

Askey307

AC600 Wireless Dual-Band Mini USB Adapter EW-7811UTC http://www.edimax.com/edimax/merchandise/merchandise_detail/data/edimax/au/wireless_adapters_ac600_dual-band/ew-7811utc Maximum Wi-Fi speeds of 150Mbps (2.4GHz) or 433Mbps (5GHz) https://wikidevi.com/wiki/Broadcom HT20-only ( 72MBps max ) All you...

Askey307

I know what chip is inside the cAP-ac, I was asking about the Lenovo computer :) Yeah LOL only realised I was blond after I replied to your post :lol: It's a Intel(R) Core(TM) i7-3632QM CPU @ 2.20GHz And what about the WiFi card in this PC? Do you know the model ? Using two but the USB dongle is my...

Askey307

- what kind of client device did you use for your test (model, brand) I've experienced with RB962 and new CAP AC with Linux Mint Lenovo E530 and Edimax USB AC dongle. Same test pc with all devices before and after. - what chip does this device use ? HAP AC=MIPS 74kc v5.0 and CAP AC ARMv7 - have you...

Askey307

The people who reported speed problems above: - what kind of client device did you use for your test (model, brand) I've experienced with RB962 and new CAP AC with Linux Mint Lenovo E530 and Edimax USB AC dongle. Same test pc with all devices before and after. - what chip does this device use ? HAP...

Askey307

And here is my speedtest via speedtest.net

Askey307

Here is my results of the Mikrotik CAP AC. This is after i've reverted back to 6.40.5 arm firmware from 6.41.3.

Askey307

I'll send performance results pictures soon. We're experiencing issues with the RB962, RB952, CAP AC's etc ever since updating them to 6.41.3. Netinstalling all back to 6.40.5 now.

Askey307

Please make screenshots or something else, most here are not able to get more then 30mbit out of cap ac https://forum.mikrotik.com/viewtopic.php?f=3&t=130632 No problem, i'll do that for you guys. Just give me till Monday when i'm back at the office. Settings i've used is factory reset with no ...

Askey307

I use this device for almost two weeks now as a replacement for a 750Gr3 and a HAP AC and works without breaking a sweat: * CAPsMAN manager for one AP and the CAP AC wireless with CAPsMAN forward * Wireless LAN and seperate wireless guest network * Gateway with firewall for internet access * IPsec ...

Askey307

I'm glad you like it! Will you use the default case, or the square case? So far i love the look of the square case more than the round one. However i can't seem to replace the case with square one. Scared i might break of a pin and then I have to pay for it haha. This thing is so far a beast. Would...

Askey307

Good Morning Guys So we've received the new CAP AC's as a Distributor a week ago. So far this unit is exceeding my expectations with Download of 192mbps and Upload of 183mbps which is amazing for such a cost effective unit. We have a 500mbps business premium fiber line. So my question so far is; * W...

Askey307

On Windows and Mac and Fedora but Mint and Ubuntu no luck. Was there a specific Winbox version you guys used that actually worked? I don't want to go back to Winbox 2 due to the Malware on it's dll files.

Can't always have static addressing but going to try it tomorrow when i'm back at work.

Askey307

I ran Winbox on Ubuntu for a long time with no issues. MAC discovery would only work though if I had a gateway set on the interface so maybe that could be something to try. Tried that, still doesn't discover anything. Tried it on a Ubuntu machine also no luck. Still can only use the unit's IP addre...

Askey307

Well that is a bit larger than what I have experience with. We have a network with some 200 users and 100 VoIP telephones distributed over 3 locations and the users are employees of a company who are not intentionally hacking the system, and if they would they would not have to be prevented to do t...

Askey307

Good Morning I'm currently running Linux Mint 18.3 with Winbox 3.12 however my problem is that Winbox (Wine) does not discover devices and cannot use mac address. So I can only use Winbox with IP addressing if I know what the address is and I cannot risk resetting the unit because I won't be able to...

Askey307

It depends on what your requirements are and what your switches can do (e.g. ACL on L3 routing) but that is what we normally do, yes. Use the switch capabilities for fiber failover, to keep VLANs for public/guest facilities separate from the L3 routing of the LAN, and use a data and voice VLAN that...

Askey307

I would spend more money on switches and when required spend less on the router. Get switches from a reputable switch manufacturer like HP Procurve (now Aruba networks) or Cisco. L3 switches with PoE from those manufacturers have come down in price and offer functionality that is currently way beyo...

Askey307

Where are you located? I am experienced in large ‘MikroTik’ networks. And might help you with this. Which brand of switches are you going to use? I'm in South Africa. So far they want me to come up with a solid new age Proposal with Cloud Computing, Top Cyber security etc. They will get Ethical Hac...

Askey307

Here is the picture of above mentioned post.

Askey307

Good Morning. I would like your help and input setting up state of the art firewall system (attached you will fine a Cisco Packet Tracer drawing concept example). I would like to use Mikrotiks for this due to the price of Cisco and Juniper. I am still new to Cyber Security (2 years) thus all type of...

Search found 65 matches