Community discussions

MikroTik App

Search found 58 matches

by rplant
Sat Oct 16, 2021 4:40 am
Forum: RouterOS v7 BETA
Topic: Is MT the worse monitoring router?
Replies: 18
Views: 1352

Re: Is MT the worse monitoring router?

Hi, I find actually it is quite good for monitoring. You can look in the /ip firewall connections tab. You can use simple queues. To see who (internally) is uploading/downloading stuff, and view current rates, and total bytes transferred, etc. eg. { /queue simple add name=qparent max-limit=500M/500M...
by rplant
Fri Oct 15, 2021 4:43 am
Forum: RouterOS v7 BETA
Topic: v7.1rc3 adds Docker (TM) compatible container support
Replies: 208
Views: 24708

Re: v7.1rc3 adds Docker (TM) compatible container support

Avahi (mdns Reflector) Hap AC^2 (256M) It took a while to get working, but I was able to build an Avahi container. Using the cross build instructions at https://hub.docker.com/r/taoyou/iperf3-alpine And the avahi container at https://github.com/flungo-docker/avahi It came out a bit over 8M in size, ...
by rplant
Tue Oct 12, 2021 3:15 am
Forum: RouterOS v7 BETA
Topic: RF testing
Replies: 1
Views: 426

Re: RF testing

Some thoughts. Assuming these are multiple UDP streams of short-ish packets. I would expect it should be possible to keep each stream individually in order. (Each stream gets its own cpu/path through the router) If it is a single very fast stream, it should be doable, but you might run out of CPU - ...
by rplant
Tue Oct 05, 2021 1:07 am
Forum: RouterOS v7 BETA
Topic: Wireguard isn't using the right IP-Address for outgoing packets [SOLVED]
Replies: 3
Views: 864

Re: Wireguard isn't using the right IP-Address for outgoing packets [SOLVED]

Hi, I have a hap ac^2 and had very similar issues a couple of ROS versions ago (and older). With both wireguard and openvpn(udp) But for wireguard (only) it has been fixed (fully? not sure) I assume the fix would also apply to the HEX. It is now working, I am using routing rules for the routing. The...
by rplant
Wed Sep 29, 2021 12:41 pm
Forum: RouterOS v7 BETA
Topic: Microtik wireguard to Raspberry pi
Replies: 6
Views: 969

Re: Microtik wireguard to Raspberry pi

I tried also with ip address with same result This is my export /interface wireguard add listen-port=51820 mtu=1420 name=wireguard1 /interface wireguard peers add allowed-address=0.0.0.0/0 endpoint-address=85.178.50.8 endpoint-port=51820 interface=wireguard1 persistent-keepalive=30s public-key=\ &q...
by rplant
Tue Sep 28, 2021 4:24 am
Forum: RouterOS v7 BETA
Topic: Microtik wireguard to Raspberry pi
Replies: 6
Views: 969

Re: Microtik wireguard to Raspberry pi

Hi, Export your wireguard config, and make sure it's endpoint-port is correct. If ok, try making the endpoint-address an ip address (rather than DNS name) apparently this can cause issues if dns is not available when wireguard is started. (Might need a script to stop and then restart wireguard later...
by rplant
Mon Sep 27, 2021 8:25 am
Forum: RouterOS v7 BETA
Topic: Feature Request Updated Ptr Records in DNS
Replies: 0
Views: 604

Feature Request Updated Ptr Records in DNS

Hi,

It would be good if I could setup service discovery records in the Mikrotik DNS as per

http://www.dns-sd.org/serverstaticsetup.html

to make selected devices (printer) discoverable on a different subnet.
by rplant
Sun Sep 26, 2021 3:13 am
Forum: RouterOS v7 BETA
Topic: v7.1rc3 adds Docker (TM) compatible container support
Replies: 208
Views: 24708

Re: v7.1rc3 adds Docker (TM) compatible container support

How do I connect a container to 2 network interfaces? Kinda depends on how the LANs (or VLANs...) your trying do mDNS reflection on ingress the router/switch. The simplest case would be using two bridges (bridgeA and bridgeB) and two virtual ethernets, vethA and vethB, for Avanti container. Assumin...
by rplant
Sat Sep 25, 2021 8:12 am
Forum: RouterOS v7 BETA
Topic: v7.1rc3 adds Docker (TM) compatible container support
Replies: 208
Views: 24708

Re: v7.1rc3 adds Docker (TM) compatible container support

Hi,
How do I connect a container to 2 network interfaces?
I thought I'd have a go at avahi as a reflector.

Thanks
by rplant
Wed Sep 22, 2021 12:59 pm
Forum: RouterOS v7 BETA
Topic: v7.1rc4 [development] is released!
Replies: 273
Views: 39900

Re: v7.1rc4 [development] is released!

Hapac^2

in RC4, iperf3 in container seems pretty solid.

I made a script to remove/create the /container settings on reboot,
seems to work ok. (Though doesn't reuse the existing container)

Might be nice to be able to use name=mycontainername
by rplant
Wed Sep 22, 2021 4:01 am
Forum: RouterOS v7 BETA
Topic: Feature Request: Logging Action to run a script
Replies: 2
Views: 604

Re: Feature Request: Logging Action to run a script

I would also like this.
Hopefully if you don't use the new features, it's would be the same as it is now.
by rplant
Thu Sep 16, 2021 11:32 am
Forum: RouterOS v7 BETA
Topic: some prob
Replies: 2
Views: 711

Re: some prob

Hi,

Leds broken has been mentioned elsewhere, (should get fixed)

ospf, check the mtu on the bridge, set it manually (probably 1500)
by rplant
Tue Sep 14, 2021 3:49 am
Forum: RouterOS v7 BETA
Topic: v7.1rc3 adds Docker (TM) compatible container support
Replies: 208
Views: 24708

Re: v7.1rc3 adds Docker (TM) compatible container support

Some issues: Hap AC^2 Installed iperf3 docker container per https://forum.mikrotik.com/viewtopic.php?f=1&t=178383&sid=e0768ea789a63fe3ef548e4460fe602c Good when its working. Doesn't remember the container setup properly on /system/ reboot. Before Reboot /container add envlist=iperf file=disk...
by rplant
Sun Sep 12, 2021 4:29 am
Forum: RouterOS v7 BETA
Topic: Openvpn Client without Username or password
Replies: 1
Views: 877

Re: Openvpn Client without Username or password

Yes, Mikrotik requires a somewhat non standard configuration.
However it mostly works.

If wireguard is an option, it seems very close to standard.
(And faster encryption)
by rplant
Fri Sep 10, 2021 6:15 am
Forum: RouterOS v7 BETA
Topic: RDP Connection Dying
Replies: 13
Views: 1262

Re: RDP Connection Dying

Hi,

Perhaps block the UDP, and see if that helps (or not).
(Give Mikrotik something more targeted to look at)
by rplant
Thu Aug 26, 2021 12:47 pm
Forum: RouterOS v7 BETA
Topic: v7.1rc1 [development] is released!
Replies: 345
Views: 35116

Re: v7.1rc1 [development] is released!

Wireguard vs OpenVPN routing difference. (OpenVPN is broken) Hi, In previous versions both Wireguard and OpenVPN Servers did not keep their connection tracking from input to output properly. Visible when incoming wg/ovpn traffic comes in on a non default gateway, where the connection is marked and r...
by rplant
Thu Aug 19, 2021 4:16 am
Forum: RouterOS v7 BETA
Topic: v7.1 recursive routes
Replies: 8
Views: 2913

Re: v7.1 recursive routes

I have working recursive routes. Note: The route display updating in winbox is flaky, you need to switch to another tab and back to the route tab to see if things have changed. /ip route add check-gateway=ping comment="check up using optus dns" disabled=no distance=10 dst-address=\ 0.0.0.0...
by rplant
Thu Jul 29, 2021 2:58 am
Forum: RouterOS v7 BETA
Topic: VRF traffic isolation
Replies: 5
Views: 1468

Re: VRF traffic isolation

From memory, VRF in Mikrotik is a special form of policy routing. Once you have hit the router, and the IP address is on the router, there is kind of no routing involved. When I used it (a while ago now) V6 also responded when hitting any router IP address on a VRF interface I imagine you could add ...
by rplant
Fri Jul 02, 2021 2:30 am
Forum: RouterOS v7 BETA
Topic: v7.1beta6 [development] is released!
Replies: 377
Views: 67468

Re: v7.1beta6 [development] is released!

/ip/firewall/mangle/export doesn't work correctly for mark-routing action.
Hi,
Try export verbose
by rplant
Thu Jun 03, 2021 10:59 am
Forum: RouterOS v7 BETA
Topic: Feature Request Multi Connection Marks
Replies: 3
Views: 1343

Re: Feature Request Multi Connection Marks

For policy routing must be used /ip routes rules than mark connection... Do not misuse just because can be also used... Mostly yes, but there are some cases where it needs state. eg. Dual Wan, where there are inbound port forwards on both links, (heading to the same internal IP address/port) Want t...
by rplant
Tue Jun 01, 2021 12:24 pm
Forum: RouterOS v7 BETA
Topic: Feature Request Multi Connection Marks
Replies: 3
Views: 1343

Feature Request Multi Connection Marks

Hi, It might be good if you could join and split connection marks. Or have multiple. So for example you can have part of the connection mark being for QOS value, and part of it being for a Policy Routing setting. And not have to search through Qos*Policy values to find the bit you want. Perhaps if a...
by rplant
Tue Mar 02, 2021 9:08 am
Forum: RouterOS v7 BETA
Topic: Wireguard tunnel internet traffic issues
Replies: 5
Views: 1884

Re: Wireguard tunnel internet traffic issues

Perhaps ip firewall nat chain=srcnat out-interface="WG1" action=masquerade Alternate to above: If config is based on default config, can just add WG1 as a WAN interfaces (Which has advantage of firewalling as well as Natting it) /interface list member add interface WG1 list=WAN Then use a ...
by rplant
Tue Feb 23, 2021 7:36 am
Forum: RouterOS v7 BETA
Topic: Routing rules/tables minor issues, feature request
Replies: 1
Views: 624

Re: Routing rules/tables minor issues, feature request

ip routes/routes
Noticed you can no longer create a blackhole route in winbox.
Also no obvious column to indicate it is a black hole.
by rplant
Sun Feb 21, 2021 11:23 am
Forum: RouterOS v7 BETA
Topic: Routing rules/tables minor issues, feature request
Replies: 1
Views: 624

Routing rules/tables minor issues, feature request

Hi, Thanks for the Winbox (IP) route updates in Beta4. In the IP Route Tab, now can show (and lets you set) the Routing Table being used, And there is a Tables tab :) Unfortunately, the Tables tab doesn't currently provide an item to set if table is in Fib or not. Not quite sure what difference it c...
by rplant
Sat Feb 13, 2021 2:30 am
Forum: RouterOS v7 BETA
Topic: Bricked hAP AC2 after flashing 7.1beta4
Replies: 4
Views: 1388

Re: Bricked hAP AC2 after flashing 7.1beta4

Hi,

All VM interfaces on PC have been disabled?

Also, worth while going for a coffee after doing the power up with reset held down (for the while)
with netinstall running.
Just leave netinstall and hapac2 sitting there turned on.
by rplant
Tue Jan 26, 2021 11:03 am
Forum: RouterOS v7 BETA
Topic: simple queue/queue graph enhancements
Replies: 0
Views: 620

simple queue/queue graph enhancements

1. Perhaps a new counting queue type, that has no packet/frame storage, immediately puts packets onto its parent. To provide a low overhead facility to count traffic (average rates, total bytes up/down, etc) Max Limit may need to be set, but has no effect. Can be graphed. 2. Option to store simple q...
by rplant
Tue Jan 19, 2021 12:41 am
Forum: RouterOS v7 BETA
Topic: Feature Request: Bridge Joiner
Replies: 11
Views: 1940

Re: Feature Request: Bridge Joiner

pppoe-passthrough-2.png One use case, pppoe pass through, previously a common option on consumer home routers, probably less so now when pppoe is less used. Nice when your ISP would allow you to connect more than once using your credentials. Your PC could (when necessary) get a routable IP on it di...
by rplant
Mon Jan 18, 2021 12:14 am
Forum: RouterOS v7 BETA
Topic: Feature Request: Bridge Joiner
Replies: 11
Views: 1940

Re: Feature Request: Bridge Joiner

You can already do it ... using another bridge.
Cool, I hope...

Though I have now attempted to do this, and it is not obvious how I can join them.
Do you have an example?

Thanks
by rplant
Sun Jan 17, 2021 12:07 am
Forum: RouterOS v7 BETA
Topic: Feature Request: Bridge Joiner
Replies: 11
Views: 1940

Feature Request: Bridge Joiner

Hi, Could you perhaps implement a ethernet joiner object to join 2 separate bridges together. Object has 2 interfaces (similar but different to a vlan object) Ideally its only option would be maximum frame size. With bridge filtering being used to limit what is allowed between the 2 lan segments. So...
by rplant
Wed Jan 06, 2021 8:37 am
Forum: RouterOS v7 BETA
Topic: Wireguard on Ac2 behind Ac3
Replies: 12
Views: 2481

Re: Wireguard on Ac2 behind Ac3

perhaps also

/interface list
add interface=WG list=LAN
by rplant
Wed Jan 06, 2021 5:13 am
Forum: RouterOS v7 BETA
Topic: updated bridge MTU (Caused OpenVPN problem)
Replies: 0
Views: 713

updated bridge MTU (Caused OpenVPN problem)

FYI, HapAC2 ros V7.1Beta3 I was initially having some issues with openvpn trying to send longish packets. While troubleshooting found that generally pinging things (normal, no openvpn) with slightly long packets (behind NAT) was broken. ping -l 1500 192.168.1.1 wouldn't work. But ping -l 1800 192.16...
by rplant
Wed Jan 06, 2021 12:47 am
Forum: RouterOS v7 BETA
Topic: Wireguard on Ac2 behind Ac3
Replies: 12
Views: 2481

Re: Wireguard on Ac2 behind Ac3

Hi, Perhaps try the following. /ip firewall nat add action=masquerade chain=srcnat src-address=10.0.0.0/24 out-interface=bridge-local And probably change where the local network ip address is placed (on bridge-local rather than ether2) ** Probably not exactly this (would need to remove/disable exist...
by rplant
Sun Dec 06, 2020 7:00 am
Forum: RouterOS v7 BETA
Topic: v7.1beta3 [development] is released!
Replies: 262
Views: 54144

Re: v7.1beta3 [development] is released!

Looking at Wireguard, Happy to see the peer endpoints appear to be stay at what I set them, Peer by DNS looks to mostly work. Both maybe seem a little bit fragile, time will tell. Thanks :) However, I now notice that it is all a bit opaque, (for a Mikrotik) There is not much monitoring currently ava...
by rplant
Mon Nov 30, 2020 11:26 am
Forum: RouterOS v7 BETA
Topic: Feature Request: Keep alive for btest server
Replies: 0
Views: 609

Feature Request: Keep alive for btest server

A keepalive on the control channel.

So when I put the wrong value in, and it starts sending piles of UDP at me,
filling the link, and I can't talk to it any more.

The control channel will break, and stop all the associated connections sending within a minute or so.
by rplant
Sat Nov 21, 2020 12:17 am
Forum: RouterOS v7 BETA
Topic: Feature Request: Wifi MPSK
Replies: 2
Views: 887

Re: Feature Request: Wifi MPSK

Cool, Thank you, I will try that. I was hoping to try it yesterday, but that didn't quite happen. Finally, after a bit of effort I got it to work ok. I initially wanted to use the password as a selector which didn't work. After a bit of thought I realized that this was probably not possible. And act...
by rplant
Thu Nov 19, 2020 12:18 pm
Forum: RouterOS v7 BETA
Topic: Feature Request: Wifi MPSK
Replies: 2
Views: 887

Feature Request: Wifi MPSK

Hi, Can Some implementation of Multiple Pre Shared Key be added (good if in V6.x as well), I assume (hope) it can be done in wpa/wpa2. My use case would be one SSID and a few different groups possibly pushed to different vlans depending on the password used. Without requiring a radius server, or EAP...
by rplant
Wed Nov 04, 2020 8:15 am
Forum: RouterOS v7 BETA
Topic: Wireguard between Mikrotik and Mullvad
Replies: 3
Views: 1644

Re: Wireguard between Mikrotik and Mullvad

Hi,

The following post might get you close.

viewtopic.php?f=1&t=165248&sid=51e92041 ... a9#p813884
by rplant
Mon Oct 12, 2020 1:28 am
Forum: RouterOS v7 BETA
Topic: Winbox Request Show Columns Upgrade
Replies: 0
Views: 590

Winbox Request Show Columns Upgrade

It would be nice if it were possible to change multiple columns visibility at once. rather than having to choose show columns, move to required column in list, click on it, (List then closes), show columns, move to next required column, click on it... Perhaps right clicking columns could change thei...
by rplant
Fri Oct 09, 2020 7:10 am
Forum: RouterOS v7 BETA
Topic: Feature Request: Data usage
Replies: 7
Views: 4109

Re: Feature Request: Data usage

Hi, Simple Queues, Simple Queue Graphs, and Interface Graphs can do some of the basics. Note: The following refers to V6, I haven't tested it much in V7, the script runs so I assume it is still good. By setting up a bunch of simple Queues I have 1 Parent, then 1 per internal IP address as well as on...
by rplant
Sat Sep 26, 2020 1:58 pm
Forum: RouterOS v7 BETA
Topic: Possible Feature Request Output NAT Reconnect
Replies: 3
Views: 870

Re: Possible Feature Request Output NAT Reconnect

You should probably explain in more details what's the problem. I'm trying to understand it, but no luck so far. Yes, fair enough. Hopefully the following makes some sense. With reference to the image below which is similar (simplified) to the one I am using. If the client attempts to connect via a...
by rplant
Wed Sep 23, 2020 10:12 am
Forum: RouterOS v7 BETA
Topic: Possible Feature Request Output NAT Reconnect
Replies: 3
Views: 870

Possible Feature Request Output NAT Reconnect

One issue with wireguard. ... Actually, on further review, its only when the output needs to go via a non default route. (route marking needed), and also happens with Openvpn (and perhaps others) sstp (tcp) using the same connection and route marking works correctly. Perhaps an alternative to chang...
by rplant
Fri Sep 11, 2020 9:01 am
Forum: RouterOS v7 BETA
Topic: v7.1beta2 [development] is released!
Replies: 387
Views: 112849

Re: v7.1beta2 [development] is released!

One issue with wireguard. Sometimes It doesn't seem to keep its connection mark on output The input to wg is coming in with a connection mark, but the output sometimes has no connection mark. Actually, on further review, its only when the output needs to go via a non default route. (route marking ne...
by rplant
Fri Sep 11, 2020 2:46 am
Forum: RouterOS v7 BETA
Topic: v7.1beta2 [development] is released!
Replies: 387
Views: 112849

Re: v7.1beta2 [development] is released!

Wireguard implementation seems to have gone pretty smoothly.

I don't suppose a backport to V6 is possible :)
by rplant
Fri Sep 11, 2020 2:45 am
Forum: RouterOS v7 BETA
Topic: v7.1beta2 [development] is released!
Replies: 387
Views: 112849

Re: v7.1beta2 [development] is released!

I've been wondering is it possible to generate keys on mikrotik for wireguard peers?
You can make a second wireguard interface, and copy the private and public key out of it.
Then delete it.
by rplant
Thu Sep 10, 2020 4:18 am
Forum: RouterOS v7 BETA
Topic: v7.1beta2 [development] is released!
Replies: 387
Views: 112849

Re: v7.1beta2 [development] is released!

Minor SFTP issue

winscp logging into router (hapac^2)
The top level directories (/flash, /disk1) show as broken links.
I can't click on them and go there.
I can type in /flash into winscp's open directory menu and that works fine.
by rplant
Sun Sep 06, 2020 12:55 pm
Forum: RouterOS v7 BETA
Topic: Wireguard VPN - routing issues
Replies: 1
Views: 1537

Re: Wireguard VPN - routing issues

My Suggestion would be at least initially to set the wireguard1 interface on host B routerOS to be a wan interface. So the outgoing traffic is natted, and looks to be coming from 10.77.77.2. Perhaps remove the route marking stuff. If this works, it is likely the problem is at the other end. Perhaps ...
by rplant
Tue Sep 01, 2020 12:55 pm
Forum: RouterOS v7 BETA
Topic: Feature Request: Storage Updates
Replies: 1
Views: 690

Feature Request: Storage Updates

Can the Winbox file list please have expandable folders. so I don't have to see every file on the file system. Could you make an option to store the graphing graphs/data in external storage. (especially useful for hex with lots of simple queues) A configurable option to allow me to access (or not) t...
by rplant
Wed Aug 26, 2020 1:22 pm
Forum: RouterOS v7 BETA
Topic: v7.1beta2 [development] is released!
Replies: 387
Views: 112849

Re: v7.1beta2 [development] is released!

Minor issue with Wireguard
Mostly seems great, quite impressed with it, I have not used wireguard before.

If I don't set the peer address, so any address can connect, when a peer does connect to it
it seems to set the peer address/port itself in its config :(

I would also like DNS connect
Thanks
by rplant
Sat Aug 15, 2020 9:53 am
Forum: RouterOS v7 BETA
Topic: Routing Rule Export in V7.1beta1 (and 6.47.1)
Replies: 1
Views: 1065

Re: Routing Rule Export in V7.1beta1 (and 6.47.1)

Some more stuff (V7.1beta1), In winbox, the Routing table (ip route) doesn't refresh very well. Often I find if I know it has changed, I need to select another tab and then go back to the Route List to get it to show all the new and changed routes. It would perhaps be good if connection marks could ...
by rplant
Thu Aug 13, 2020 3:10 am
Forum: RouterOS v7 BETA
Topic: Routing Rule Export in V7.1beta1 (and 6.47.1)
Replies: 1
Views: 1065

Routing Rule Export in V7.1beta1 (and 6.47.1)

Hi, When doing an export, Routing rules are not exported. Also It would be good if print in /ip route would do a (left) join with the /routing table and display the table it is using. Currently I am putting a comment in the route, to match the route to a table (and it's creation statement) add comme...
by rplant
Fri May 08, 2020 12:52 pm
Forum: RouterOS v7 BETA
Topic: UDP OpenVPN tunnel same speed as TCP
Replies: 7
Views: 6259

Re: UDP OpenVPN tunnel same speed as TCP

The hAP ac2 CPU already has Hardware support for AES-CTR and AES-CBC (128 and 256).
Thus, AES256-CBC would be a much better fit.

Yes ok, I'll have that please :)
by rplant
Thu May 07, 2020 1:31 pm
Forum: RouterOS v7 BETA
Topic: Beta5 minor assorted things
Replies: 0
Views: 1225

Beta5 minor assorted things

Beta5 minor assorted things. Hap AC^2 Could disable a static route via script. Couldn't reenable it. policy routes seem dubious, Eventually was able to get one created following the instructions in the Forums. But was unable to get it to actually work. (I possibly gave up early though) Backup/Restor...
by rplant
Thu May 07, 2020 1:18 pm
Forum: RouterOS v7 BETA
Topic: UDP OpenVPN tunnel same speed as TCP
Replies: 7
Views: 6259

Re: UDP OpenVPN tunnel same speed as TCP

I thought I would post this stuff here, as it seems somewhat on topic. Hap AC^2 OpenVPN UDP. Seems mostly good, seems a nice way of connecting to devices through NAT. As mentioned elsewhere, push routes would be nice. **Hardware encryption support would be great** Perhaps AES-128/256-GCM I was able ...
by rplant
Wed May 06, 2020 2:28 am
Forum: RouterOS v7 BETA
Topic: NTP server Issue
Replies: 9
Views: 4876

Re: NTP server Issue

I had a look at one of the Leo Bodnar NTP server's, it is rather cool, but way beyond what I need. Thanks :) On thinking about it I doubt I actually need anything better than 0.5 to 1 second accuracy. (I would like 10-50mS) The main reason I want GPS, is because of the very rare occasion when I find...
by rplant
Mon May 04, 2020 1:10 pm
Forum: RouterOS v7 BETA
Topic: NTP server Issue
Replies: 9
Views: 4876

Re: NTP server Issue

Hi, I had a bit of a further trial with this, (behind some src-nat, which put me on the right port), it seems to work ok. I quite like that you can specify the Local Clock Stratum. I would like it if it continued to use the specified stratum when you enabled the NTP Client, (Perhaps with a warning w...
by rplant
Sun Mar 29, 2020 11:00 am
Forum: RouterOS v7 BETA
Topic: NTP server Issue
Replies: 9
Views: 4876

NTP server Issue

ROSV7 Beta 5 HAPAC2, In bridge mode, (all ports bridged, bridge interface marked as LAN) The NTP server response to the client seems likely to always be port 123 Trace below is from (userland client) from port 55188 to server on port 123 Server sends response to client but with destination port of 1...
by rplant
Fri Sep 29, 2017 11:54 am
Forum: General
Topic: Queues Cisco > Mikrotik
Replies: 22
Views: 5387

Re: Queues Cisco > Mikrotik

Hi, A bit late, but perhaps useful for people finding this thread later. Current Mikrotiks have a Bucket Size option in their Queue Settings. We had this problem and were able to fix it using this option. We set it to a small value 0.005, 0.01 also seemed ok in our instance See https://wiki.mikrotik...