Hi bgp players, just saw this, and I can tell you good news. It works, solid establised bgp session on Vultr + RouterOS (Both v6 and v7). Answer your question: 1. Q: What should I set the next hop to for the BGP peer route as default gateway is leant via RA? Should it be the link local address or th...

a cloud one? or self-hosted?
tr069?

Try lowering the mtu of the tunnel on both site. try 1280.

Hi, as far as i know, I and other users on the forum have been experiencing this problem MANY years. 1. (v6/v7) Language other than english & common char & numbers, does not decode properly. (yes, I can direct use AT message to get raw PDU message, but that's not elegent) 2. (v6/v7) Segmente...

+1 for BFD

1GB RAM, nice, wifi 6 but no more than 1G port.....for this size, it's.......fine. but no usb....no sd...... ≈ zero expect on container, no where to store the image (ohoh, miss one way to utlize 1GB RAM) ≈ no more storage (smb, protable pxe server, dude, etc etc..) ≈ no usb lte modem (which useful o...

Same @ v7.3beta40 Get 22 (Invalid argument) when ping to target under VLAN. Target under that can't ping gateway(ros) ip, network complete break. Could ping "nomally" when "Interface" specfic in winbox ping tools. ( It's in same layer-2, connected route, it shoud ping even withou...

This is GREAT.

Sweet, any wifi/any upgrade(lte, etc) version 5009?

If True:
sleep.(<1month)
buy the best
else:
buy 5009 now

Want to upgrade my EDC (now hapac2. ac3 seems much longer, with no significant differences, 5009 looks solid.)

To clear up any confusion about different performance data I would like to point that RB5009 is RouterOS v7 only board. With that in mind it was in our best interest to give both devices a fair comparison, therefore both units were tested with the same RouterOS v7 version (in this case RouterOS v7....

I just messed up with the l2tp server and found the proposal for l2tp is not selectable. Maybe It's a "nice to have" feature. Yes, we can create a proposal for every tunnel, but it's a bit complex when the dest endpoint uses DDNS. For someone from a search engine with the same scenario. No...

Hi, I just found IPv6 routing-mark seems to be supported from v7beta1 (https://help.mikrotik.com/docs/display/ROS/v7+Routing+Protocol+Status) docs.PNG So I download chr-7.1beta2 to try, the "mark routing" didn't appear in the winbox mangle action. v6-1.PNG I switch to CLI. I've already use...

750GR3 can be a good choice if you need 300Mbps IPS
ec VPN.

Or you can choose 3011/4011 rather than 2011/CRS , cause they have IPSec HW offload.

(If you don't have sensitive data that need to be encrypted, try pptp maybe have the better speed.)

Now some of my routers have more than 30 IPs because they have many PPP/tunnel interface. The Dude will auto add first 20 IPs for each router on the scan, and can manually add IPs up to 30 now, but no more, this (maybe) cause my router to have multiple duplicated on the map. I know too many IPs may ...

Many thanks!
That's save my time!