MikroTik

icosasupport

Unfortunately, CCR2xxx cannot run RouterOS v6 and we cannot use RouterOS v7 due to the lack of BFD support.
Interesting times ahead...

Sounds like it's time for whitebox Vyos!

icosasupport

Most of ours die from uncontrollable environmental issues. 99% of the time the bootloader is stuck in a loop, prob a corrupt MMC. Also where we are there's no real repair option for them, especially if they're stuck in a kernel panic boot loop. Netinstall usually doesn't save them from that in our c...

icosasupport

Yes, we plan ahead, especially with having a couple hundred router devices in service. However those devices die at the hardware level and if everyone else is "planning ahead" then there will inevitably be a shortage or none at all. So in the interest of planning ahead, I would really like...

icosasupport

End-of-sale might indeed be closing fast. However EOL/End-of-support is a very different thing in Mikrotik world (at least it used to be until now) and I expect it's still many years away. If MT was to EOL their CCR1xxx family, I don't think they'd bother making ROS v7 for that platform. This is tr...

icosasupport

I also would like to know when the EOL for CCR 1072/1036's is. We have a couple hundred of them in production and some are at their end. We've replaced some with our own stock, however the question remains, will there still be some to purchase or should we be considering the CCR ARM replacement? Thi...

icosasupport

I just foresee that when a properly completed VRF config allows for real management isolation that I myself would not want to rebuild 100+ configs to accommodate that, since I currently have a greenfield project in the works. Seeing as we've all waited over many years for the glorious version 7, I g...

icosasupport

Seems to me after numerous years of working on Ros 7 there would be an incentive for Mikrotik to at least get management VRF's working correctly. I mean you can VRF the IP services (ssh, www, winbox etc) why not RADIUS? Who would want their RADIUS to go out over non private addresses :O At the very ...

icosasupport

Hi, I recently upgraded from 6.49 to 6.49.2 and noticed that the firewall conntrack entry size has reverted even though the previous release notes state: " conntrack - increased total connection tracking table size based on installed RAM size;"' Ok, 6.49 had this: *) conntrack - increased...

icosasupport

I think the wording is a bit misleading here, but probably you see what's expected. The number of max entries depends on your installed RAM. Currently you have 3888 items with a maximum of 1048576. This is hardly an issue, no? If it is you have to add more RAM I guess. There's nothing misleading ab...

icosasupport

Hi, I recently upgraded from 6.49 to 6.49.2 and noticed that the firewall conntrack entry size has reverted even though the previous release notes state: " conntrack - increased total connection tracking table size based on installed RAM size;"' Just as a note all I did was upgrade, the RA...

icosasupport

My CCR1009-7G-1C after upgraded to 6.45.x, it rebooted every night.
The logs says
"router was rebooted without proper shutdown, probaly kernel failure.
Kernel failure in previous boot."

Any solutions?

Welcome to the club! No fix afaik.

icosasupport

Is there any chance to login with MAC Telnet ?

it's a known issue with winbox. Try upgrading it to 3.19

icosasupport

Dear Mikrotik, When are you going to start testing your releases? I'm guessing never, since that would be a huge workflow change internally. When I see this in the patch notes "*) ospf - fixed possible busy loop condition when accessing OSPF LSAs;" and my routers are experiencing that prob...

icosasupport

Don't worry you can use kid control on your core routers to block them.

Seriously though, what is up over @ MT ?

icosasupport

Hi Martin,

Glad to hear that works for you!.

I break the code up like that to keep repetition down, just in case something needs to change there's a single place to change it.

Cheers,
Icosa.

icosasupport

Hi Martin, This sounds like a job for dynamic scripting. It's a bit more advanced, however it looks like it can be used to solve your problem. Please be careful of the spaces at the end of the strings, they are required. Make sure to replace the default-name of your wireless interface if it's differ...

icosasupport

I've tried embedding the error catching as you have described, but I still have the same issue. I've also upgraded the RouterOS to the latest on the "Metal 2SHPn" just in case and the same result... Any other idea ? I don't want to start breaking out this script into many small one, say {...

icosasupport

We are using 2 types of radios: "BaseBox 2" & "Metal 2SHPn" We'd like to write a single script to configure them, but the problem is that the OS tries to interpret the lines that will NOT be executed and fails Ex: :global Board [/system resource get board-name]; ... :if ($Bo...

icosasupport

how do you call the Functions* after running this script? Do I have to use
Code: Select all
 /system script run "Functions"
or there is another fancy way( for ex.
Code: Select all
:local testfunc $Functions
)

I have some examples of that here viewtopic.php?f=9&t=40507#p627016

Icosa.

icosasupport

Hello, I want a script that warned me by email that a user has been added to my DHCP server. Not as a wireless user but as an intruder on my network. I have a fixed number of devices on the router board. If there is still a device, I want this script to warn me. Does anyone have experience with tha...

icosasupport

Hi, The scheduler provide an Interval setting which allow the scrip to execute every XXXX amount of time. https://wiki.mikrotik.com/wiki/Manual:System/Scheduler /system scheduler add interval=30s name=Repeat-Rule on-event="[INSERT SCRIPT TO RUN HERE]" start-date=Jan/01/2000 start-time=00:0...

icosasupport

Hi skubriev, This may do what you require. You can add any additional stats you require from the flood-ping tool. Cheers, Icosa. # IP ADDRESS TO PING :local ipping 8.8.8.8 # PING COUNT SET :local cnt 1 :local rtt :local avgrtt [:tool flood-ping address=$ipping count=$cnt do={ :if ($sent=$cnt) do={ :...

icosasupport

Hi erizetael, This should be close to what you wish to achieve. Cheers, Icosa. :local names [:toarray "name1,name2,name3,name4,name5"] :local profile "800menit" /tool user-manager :foreach user in=$names do={ if([:tool user-manager user [find username=$user]] = "") do={...

icosasupport

Hi, - Is the ARP request tagged and the reply too? (Yes, all traffic is encapsulated in the VLAN) - The MAC address shall be the same of the physical port or not? (Not Always) - If we have a VLAN on a bridge, having assigned to it an IP address, the MAC is always the same (for VLAN, bridge and physi...

icosasupport

I see here http://www.icplus.com.tw/pp-IP178C.html that it supports VLAN's to some degree. "Support port base VLAN & tag VLAN" You problem will be if you want different ports on the switch to access different VLANs on the router you HAVE to untag them on the switch if the device is NOT...

icosasupport

Hi, First off I'm going to make some presumptions about your environment since you haven't specified model numbers or OS versions. Your diagram #2 shows some weird addressing, that doesn't match with the config given, again I'll presume it's a typo. When attempting to do what you want from a router,...

icosasupport

Hey all, Need to calculate your IP subnets but don't have access to the internet? How about as part of scripts? Maybe to create dynamic IP pools? Here's our IP subnet calculator function. It's probably not optimized in the calculation part, but it does work so we're just using it 'as is' We make thi...

icosasupport

Hey all, Here's an advanced function that will add a device to Observium http://docs.observium.org/api/#adding-a-device via the REST API call. You do however need the licensed version to use the API calls . This has not been fully tested in the latest version! (17.9.xxx) so some adjustments may have...

icosasupport

Hey all, Here's a simple function that will replace a single character in a string of text with another To call the function simply reference it in your code. The first parameter is the string to replace a character in Parameter 2 is the character to find Parameter 3 is the "replacement" c...

icosasupport

Hey all, Here's a script that reads a "config" file, parses it as a key:value pair and returns an array of key:value pairs with the K:V pair as an array also. Each line of the config file represents the index value of the main array, and then each key:value pair in the array can be indexed...

icosasupport

Hi all, Here's a script to convert strings to upper or lower To call it simply reference the function in your code and call it: :local replace [:parse [:system script get replace-upper-lower source]] :set $var [$replace "convert me to upper" ] OR :set $var [$replace "CONVERT ME TO LOW...

icosasupport

Hi all, I saw this and decided to re-write it, to be used as a function. I used proper arrays so the reference could be indexed instead with the index call ($array->$index) To call it simply reference the function in your code and call it: :local replace [:parse [:system script get replace-upper-low...

Search found 32 matches

Re: End-of-Sale and End-of-Life of TILE-based CCR [SOLVED]

Re: End-of-Sale and End-of-Life of TILE-based CCR [SOLVED]

Re: End-of-Sale and End-of-Life of TILE-based CCR [SOLVED]

Re: End-of-Sale and End-of-Life of TILE-based CCR [SOLVED]

Re: End-of-Sale and End-of-Life of TILE-based CCR [SOLVED]

Re: Radius management vrf

Re: Radius management vrf

Re: v6.49.2 [stable] is released!

Re: v6.49.2 [stable] is released!

Re: v6.49.2 [stable] is released!

Re: v6.45.2 [stable] is released!

Re: v6.45.2 [stable] is released!

Re: v6.45.2 [stable] is released!

Re: Running IPv6 on Mikrotik? You're out of business in 12 days time

Re: Howto use a single script for multiple HW boards ? [SOLVED]

Re: Howto use a single script for multiple HW boards ? [SOLVED]

Re: Howto use a single script for multiple HW boards ? [SOLVED]

Re: Howto use a single script for multiple HW boards ? [SOLVED]

Re: Functions and function parameters

Re: script that warned me by email that a user has been added to my DHCP server

Re: Turning off and on rule

Re: Extract timeout from ping command and write it to variable.

Re: if condition for array

Re: Howto join several VLANs on a Bridge?

Re: Howto join several VLANs on a Bridge?

Re: Howto join several VLANs on a Bridge?

Re: Useful scripts

Re: Useful scripts

Re: Useful scripts

Re: Useful scripts

Re: Useful scripts

Re: UPPER / LOWER STRING