Community discussions

MikroTik App

Search found 7 matches

by jurek
Thu Nov 01, 2018 4:25 am
Forum: General
Topic: EOIP site to site only half working
Replies: 10
Views: 878

Re: EOIP site to site only half working

This can be solved with firewall rules. There are a lot of examples how to build good and simple firewall so you will definitely find something what fits your scenario. My recommendation, or I should say Mikrotik's Gurus recommendation :-) is to use address lists and use them with firewall rules (no...
by jurek
Thu Nov 01, 2018 1:48 am
Forum: General
Topic: EOIP site to site only half working
Replies: 10
Views: 878

Re: EOIP site to site only half working

1. EoIP tunnel has 2 ends, so no reason to use /29 mask. I suggest to use 10.10.10.1/30, 10.10.10.2/30 and forget about connecting anything within this ip range. Additionally I recommend to enable IPSEC on EoIP tunnel. 2. If you are using only this one EoIP tunnel, use static routing instead of OSPF...
by jurek
Thu Nov 01, 2018 1:25 am
Forum: General
Topic: HEX Lite (750R2) shows last log only in Winbox [SOLVED]
Replies: 1
Views: 304

Re: HEX Lite (750R2) shows last log only in Winbox [SOLVED]

guys,
in case someone finds the same problem... here is solution :-)
/system logging action
set 0 memory-lines=xxx
##where xxx means numbers of lines showed


Thanks Mikrotik Support !!!
by jurek
Wed Oct 31, 2018 4:18 pm
Forum: General
Topic: EOIP site to site only half working
Replies: 10
Views: 878

Re: EOIP site to site only half working

Can you provide more info? 1. I understand that EoIP tunnel between main and remote office is up. Are you using L3 (both ends of EoIP tunnel have IP address?) 2. What is LANs IP addressing on both sides? (main, remote) you want to communicate. 3. Please explain where network 172.19.0.0/19 is assigne...
by jurek
Tue Oct 30, 2018 7:45 pm
Forum: General
Topic: Network Printer on the two Subnets
Replies: 2
Views: 784

Re: Network Printer on the two Subnets

1. create firewall forward rule which allows communication from 192.168.3.0/24 to host 192.168.14.202 2. do not forget to setup proper gateway on printer 3. add printer on customers' OS using printer's IP address (instead of searching for printer) 4. For security you can limit firewall rule to port ...
by jurek
Tue Oct 30, 2018 7:16 pm
Forum: General
Topic: Mikrotik an L2TP Client connected but not working
Replies: 2
Views: 451

Re: Mikrotik an L2TP Client connected but not working

1. Do you have PPP profile assigned to L2TP Server? 2. Does PPP profile has local IP address (I recommend to create bridge named "loopback" assign IP address to it and use as local IP for PP profile) 3. Check if you have any firewall rules that may drop packets from src ip addresses from other side ...
by jurek
Tue Oct 30, 2018 7:03 pm
Forum: General
Topic: HEX Lite (750R2) shows last log only in Winbox [SOLVED]
Replies: 1
Views: 304

HEX Lite (750R2) shows last log only in Winbox [SOLVED]

Hi, I've got HEX Lite (RB750 r2) accessed from Winbox 3.18. I've noticed that LOG window shows only one line, and all logs are displayed in this first line so I'm able to see the last log only. It happened on 6.42.7 and it is still like this after upgrade to 6.43.4 It must be something within Winbox...