MikroTik

gpienaar

How can the master ask the students for advice?

You can create a flow first(mark connection) and then from connection mark create packet mark! It just work better according to the clever people!

I would also like to no from the MT guys why this is so!

Regards

Mr G

gpienaar

Try it did it work!

Like I said before, I do not currently run PPPOE and Queue tree on same unit!

But I am sure that you can play with the mangle rules to spesify your outgoing interface! therefore your PPPOE (interface on it's own) should work fine!

Try it and let me know!

Regards

Mr G

gpienaar

On my systems I have the queue tree setup on main gateway MT and all other clients connect via tower MT's (PPPOE links). whole network is running ospf!

Regards

Mr G

gpienaar

Create PPPOE server, create PPPOE profile with limit of 64k up and 128k down! This should work!

Regards

Mr G

gpienaar

yes it is greaat!! But can we somehow achieve for same client, when he reaches 1000000 bytes priority goes to 8, and he makes new connection ( web surfing ) will that new connection open web page quickly or or it will be choked by his download that is active ? This is why it is beautifull, this is ...

gpienaar

dear gpienaar shall I remove all the simple queues or no, coz yu write that each file downloaded at 8megabits of size will be downloaded at speed of 1 meg and after the 8 meg it will be at low speed right? Yes, remove simple queues! Lets try again! 1 Customer will start download! 2. For the first 1...

gpienaar

Yep! Take 2 x 532 with 4 x CM9 cards, set it up for N-stream dual and check it out for you self! I also don't now why RSTP increase performance! In theory I agree with you! Check out the specs for that test as on that link placed by Uldis! Compare routing to bridging on both software versions! Regar...

gpienaar

to Uldis! You guys cheat!! You have enabled RSTP on V3.0!! Enable it on V2.9.38 and it will perform the same! Here is some secret to all!! If you can not get enough speed out of nstream or nstream dual, just enable RSTP!!! This has been tested! I am sure Uldis can tel us why!!! If you want to do a f...

gpienaar

to Samsoft! That was only an example! Play with the idea and modify accordingly (speeds and total data)! 512kbps/s is about 52 -55KBytes per second download in real life! Try to implement and run it for 48 hours and see if it works for you! samsoft - "but as i said , thats all MT can do ? waiti...

gpienaar

samsoft08 "ok i dont understand the relation between the speed and the total amount of bytes downloaded .. " Please note that main download and upload make use of PCQ theirfor you need to specify max data rate otherwise PCQ will not work(MT basic training) Sorry forgot to add this in previ...

gpienaar

you will get much more if you use RB532 with Nstream on! RB112 is not made for Nstream!

Regards

Mr G

gpienaar

60 concurrent connections should not be a problem!

Voip is not very bandwidth intensive, depends on codec used. My sip is running on average 11kbps up and 11kbps down!

I hope this will help you!

Regards

Mr G

gpienaar

Is their a option on your DSL modem for bridge mode? If yes, set it in bridge mode, then setup MT as PPPOE client with your username and password. It should work!

Regards

Mr G

gpienaar

Dear savagedavid!

Please make more time on Mikrotik training sesions for OSPF!!

Regards

Mr G

gpienaar

To sam soft08! Clearly you dont understand! 1Mb/s speed download yes. The mangle rule will mark all packets as new connections, until total download data reach 1MB (8 megabits in 1 megabyte), then packets match rule to mark them as old packets, hence the priority is shifted down to 8! I hope this is...

gpienaar

please can you paste your setup from MT ?? Please note that all my clients come in on PPPOE on previous MT's limited at 128k and their connection limits is aready being set at 100! Main MT configuration is as follow! Here it is! First Mangle 16 ;;; mark all new connections chain=prerouting protocol...

gpienaar

Hi All! I had same problem in the past! Encrypted P2P is very difficult to limit! I also tried to limit P2P, but it just took over the network. Yes you can limit connections as explained before! The best result I had is to mark all new packets=2000000 and after this it will turn into old packets wit...

gpienaar

Walla! It is working! :D Thank's Tom! This is exactly how my network is working! Please update the wiki site as an example. I am sure their is a lot of people out their that would like to run their network like this! Mikrotik, please update your manuals with examples like this! Regards Mr G P.S Many...

gpienaar

First of all you must use routing-test package! each PPPoE server must be ABR (in separate Area) Then go to the "/routing ospf area range" and specify summary network with option "advertise=yes" then this area will distribute only summary route and get rid of all specific routes...

gpienaar

gpienaar, are you running routing-test or the legacy routing package? I do not want to create a OSPF on or inside a PPPOE link! Ok, so what do you want, then? Is your problem that a route to each PPPoE client is propagated through your entire network as soon as the new client connects? What do you ...

gpienaar

Very easy, switch off trial account!

Change your login screen with a phone number to dial, give him then acces for 10 min. This is the only way, been their got the T-Shirt!

Regards

Mr G

gpienaar

I do not want to create a OSPF on or inside a PPPOE link! Sorry Normis! I realy do not understand what you trying to say! :roll: Is their any body that have implemented OSPF on a large scale on Mikrotik and also run PPPOE links to the clients? Out of a admin point of view and a expandability on towe...

gpienaar

How does a filter work in ospf?

gpienaar

Hi Dave!

Nice to hear from you! How will I be able then to do the PPPOE thing with OSPF?

gpienaar

I have 10 towers running OSPF on RB532! I also run PPPOE on all the towers! The address range 10.22.x.y is running as backbone and all the 192.168.x.y is the pool addresses for PPPOE clients. Under OSPF is only the 10.22.x.y specified as backbone (example=10.22.1.y/24 for tower 1, 10.22.1.y/24 and 1...

gpienaar

:twisted: For all your clever people!! 1. SR9 is a 900mhz card! 2. SR2 is a 2.4GHz card! 3. SR5 is a 5Ghz card! Each card have their specific ranges that it can work in! Please select proper antenna for each card! For Sr9 on 2ghz :lol: ! For the RF house :lol: As we all know, basic wireless training...

gpienaar

Hi Daniel!! I am running 10 towers as you know and I am running PPPOE and Hotspot on different towers. I do not use masquerading on my network, only at the end point BIG ROS machine that is handling the firewall rules, routing to different gateways and caching! The benefit of the network running OSP...

gpienaar

I've been using 2 SR5 on a RB532 for more than 6 months now, and it works... This last time I've been having drops and cuts in connection, but I'm pretty sure that it has no connection with the fact I'm using 2 SR5. I also use RB112 with R52 or CM9 or SR5. It works (I'm using WDS, NStreme is disabl...

gpienaar

as normis said before - more powerful boards are coming. I am waiting for them as well.

I am like a kid waiting for a toy that was promised to me! When? When?

gpienaar

I have 2 SR cards in a few 112s and I havent had any problems so far. But like I said, I only use 532s for CPEs and some APs. No more 112s will be installed. I think for nstreme APs the 532 is still not good. I sure hope MT gets a faster board out soon. Hi Jobber! Agree with you, just don't ever in...

gpienaar

:D I am a bit disappointed in the range of routerboards available! Even the 532 is not powerfull enought The ideal would be to have a layout like the 153 with at least 600Mhz cpu clock, and 256mb ram! now your question will be why! To run 2 x sr5 cards, 1x sr2, both sr5 must run Nstream(this kill th...

gpienaar

I have to disagree! I am running about 10 towers with OSPF, no Problem, Try to run a radius server for your clients to authenticate! This save's a lot of memory on 532! Nstream is very cpu intensive, I do not reccomend it, if you have to, only 1 card for backbone!

gpienaar

All I can say about a 112 is, only use at client with 1 card! My experience over the 2 years with 112 is: ban it from all towers, not suitable for nstream!!

Search found 33 matches

Re: thx for yur reply

OSPF and PPPOE nightmare!