Community discussions

Search found 83 matches

by mlenhart
Fri May 31, 2019 9:10 am
Forum: Announcements
Topic: v6.44.3 [stable] is released!
Replies: 123
Views: 31819

Re: v6.44.3 [stable] is released!

BUG REPORT Hello, I would like to report a wrong Last Link Down Time showed in Winbox. This issue has been seen on WW Dish, and hAP AC. Time is in future, which is impossible. Please see attached screenshot: https://paste.pics/5OJ84 You didn't show the time in winbox (next to the Uptime). Your MK p...
by mlenhart
Wed May 29, 2019 9:58 pm
Forum: Announcements
Topic: v6.44.3 [stable] is released!
Replies: 123
Views: 31819

Re: v6.44.3 [stable] is released!

BUG REPORT

Hello,

I would like to report a wrong Last Link Down Time showed in Winbox.
This issue has been seen on WW Dish, and hAP AC.
Time is in future, which is impossible.
Please see attached screenshot: https://paste.pics/5OJ84
by mlenhart
Tue Feb 05, 2019 4:18 pm
Forum: Announcements
Topic: v6.43.11 [stable] is released!
Replies: 79
Views: 11837

Re: v6.43.11 [stable] is released!

WW Dish before upgrade: RSSI -49 on both ends, after upgrade -56 on one side, -59 on 2nd side After a reboot one side was fixed at -49 RSSI again, but 2nd shows MCS 1 and signal level 20, RSSI -59 again. After another reboot, it is back on -49 on both ends with MCS 8 and signal level 95. Another iss...
by mlenhart
Tue Dec 11, 2018 2:20 pm
Forum: RouterBOARD hardware
Topic: hEX PoE + SFP S-31DLC20D = INCOMPATIBLE
Replies: 2
Views: 400

Re: hEX PoE + SFP S-31DLC20D = INCOMPATIBLE

and??? where is the idea of your topic? I have seen that many times, unfortunately it is not so true...
by mlenhart
Tue Dec 11, 2018 9:31 am
Forum: RouterBOARD hardware
Topic: hEX PoE + SFP S-31DLC20D = INCOMPATIBLE
Replies: 2
Views: 400

hEX PoE + SFP S-31DLC20D = INCOMPATIBLE

Hello all,

does anyone of you have SFP S-31DLC20D running in hEX PoE?
I tried to use this SFP in hEX PoE, unfortunately it never worked (at least for me).
Same SFP worked OK in hAP AC, but never in hEX PoE.

https://imgur.com/a/ELFYxVh
by mlenhart
Mon Aug 20, 2018 11:53 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 113316

Re: v6.43rc [release candidate] is released!

Version 6.43rc56 has been released.

*) w60g - stop doing distance measurements after first successful measurement;
I have to report, that distance measurement does not work correctly. On AP side it reports 706.54m while on client side just 374.28m (374.28 is the correct distance)
by mlenhart
Sun Jul 29, 2018 2:12 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 63638

Re: LHG 60G experience

I am running on 6.42.6, frequency is set to auto. Disconnects are too often - 230x for 4 days uptime is insane... Distance about 340m.
Clear LoS, no rain for 4 days... any idea what else should I check?
by mlenhart
Sun Jul 08, 2018 10:36 pm
Forum: General
Topic: Feature request - DNSCrypt support...
Replies: 156
Views: 45374

Re: Feature request - DNSCrypt support...

+1 for DNSSec/DNSCrypt
by mlenhart
Fri Jul 06, 2018 10:11 am
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 113316

Re: v6.43rc [release candidate] is released!

I wonder if the same limitations and/or problems apply to LHGG-60ad. Anyone installed them? We are expecting a pair of those and I was wondering what would be the best stable ROS for it. It will be a production link so stability is a must.
6.42.5 (latest current till now) works OK for me.
by mlenhart
Thu Jul 05, 2018 9:52 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 113316

Re: v6.43rc [release candidate] is released!

wAP60G 240m link updated from rc32 to rc42, client not connecting any more in scan see signal but not connecting, back to 6.42.5 it is working again, but seem to me it is not stable as has been in 6.42.1. Also please check scan for frequency 64800 seems to me it is not scanning that frequency when ...
by mlenhart
Thu Jun 28, 2018 10:04 am
Forum: General
Topic: ERROR: bad HTTP response while trying to update
Replies: 5
Views: 1200

Re: ERROR: bad HTTP response while trying to update

no, no hotspot there...
by mlenhart
Tue Jun 26, 2018 9:55 pm
Forum: General
Topic: ERROR: bad HTTP response while trying to update
Replies: 5
Views: 1200

Re: ERROR: bad HTTP response while trying to update

No DNS issue. what you can see at picture is the output when you press stop. DNS resolving works OK...
by mlenhart
Tue Jun 26, 2018 8:51 pm
Forum: General
Topic: ERROR: bad HTTP response while trying to update
Replies: 5
Views: 1200

Re: ERROR: bad HTTP response while trying to update

MikroTik support ticket created: [Ticket#2018062622006049]
by mlenhart
Tue Jun 26, 2018 8:49 pm
Forum: General
Topic: Problem with RouterOS upgrade/downgrade
Replies: 2
Views: 722

Re: Problem with RouterOS upgrade/downgrade

have you tried to do it via CLI?
if so, can you paste output here?
by mlenhart
Mon Jun 25, 2018 12:34 pm
Forum: General
Topic: ERROR: bad HTTP response while trying to update
Replies: 5
Views: 1200

ERROR: bad HTTP response while trying to update

Hello, can anyone advise how to solve this issue_ [admin@<system-identity>] > /tool fetch https://download.mikrotik.com/routeros/6.43rc32/routeros-arm-6.43rc32.npk status: failed failure: closing connection: <404 Not Found> 159.148.172.226:443 (4) [admin@<system-identity>] > http://i67.tinypic.com/3...
by mlenhart
Fri Jun 22, 2018 11:48 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 63638

Re: LHG 60G experience

400m link, ROS 6.42.4: 1st side: [admin@MikroTik] > /interface w60g monitor 0 connected: yes frequency: 58320 remote-address: XX:XX:XX:XX:XX:XX mcs: 8 phy-rate: 2.3Gbps signal: 95 rssi: -53 tx-sector: 45 tx-sector-info: right 0.6 degrees, up 0.6 degrees rx-sector: 96 2nd side: [admin@MikroTik] > /in...
by mlenhart
Thu Jun 21, 2018 9:43 am
Forum: Beginner Basics
Topic: Bugfix vs Current
Replies: 2
Views: 750

Bugfix vs Current

Hello, I have a question about different "channels" for updates I can see that in Bugfix channel the latest release is 6.40.8 but in Current it is 6.42.4 My question: is the current Bugfix version (6.40.8) the same as it was a long ago the Current 6.40.8? Does it mean that all new features since 6.4...
by mlenhart
Tue Jun 19, 2018 1:32 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 113316

Re: v6.43rc [release candidate] is released!

*) w60g - improved maximal achievable distance;
what is the new maximum distance for wAP60g and LHG60G?
by mlenhart
Thu Jun 14, 2018 10:10 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 113316

Re: v6.43rc [release candidate] is released!

*) w60g - added distance measurement (CLI only); *) w60g - improved link stability; *) w60g - improved maximum link distance; 1) distance mesurement in CLI is here since rc19. Has it been improved somehow? Or what is the difference? 3) what is the new maximum link distance for WAP60 and LHG60? 2) I...
by mlenhart
Wed Jun 13, 2018 4:16 pm
Forum: General
Topic: Feature request: Wireless Wire Dish more SNMP OIDs
Replies: 2
Views: 820

Feature request: Wireless Wire Dish more SNMP OIDs

Hello MikroTik team, would it be possible to add more SNMP OIDs to Wireless Wire Dish? Mode, SSID and Frequency are really too little. It would be great to see at least MCS, PHY-rate, signal and RSSI and absolutely a dream it would be to see all details from /interface w60g monitor wlan60-1 ... Are ...
by mlenhart
Wed Jun 06, 2018 8:25 am
Forum: Beginner Basics
Topic: RouterOS Downgrade
Replies: 4
Views: 734

Re: RouterOS Downgrade

make sure also that 6.33.1 is supported for CCR1009-7G-1C. You can check it in System -> Resources and check for "Factory Software" You can not go lower than this version.
by mlenhart
Tue Jun 05, 2018 1:01 pm
Forum: Beginner Basics
Topic: Feeling overwhelmed setting up hap ac2
Replies: 11
Views: 2023

Re: Feeling overwhelmed setting up hap ac2

@Andyc: if you want to hire me, please mail me to matus.lenhart@gmail.com
You can check my MikroTik certificates at https://mikrotik.com/certificateSearch and type there my name (Matus Lenhart)

Admins: if it is not allowed to publish e-mail address, please remove this post. Thank you
by mlenhart
Mon Jun 04, 2018 5:16 pm
Forum: Beginner Basics
Topic: Feeling overwhelmed setting up hap ac2
Replies: 11
Views: 2023

Re: Feeling overwhelmed setting up hap ac2

I can be your "consultant" if you want and I am willing to help you as much as I can
by mlenhart
Wed May 30, 2018 11:36 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 113316

Re: v6.43rc [release candidate] is released!

*) w60g - added distance measurement (CLI only)

Could someone please explain why we can see this also in rc19? Has it been "re-worked" somehow between rc19 and rc21?
by mlenhart
Mon May 28, 2018 4:44 pm
Forum: Beginner Basics
Topic: hAP ac vs hAP ac^2 - which to choose for home?
Replies: 8
Views: 3780

Re: hAP ac vs hAP ac^2 - which to choose for home?

1) CPU: hAP ac^2 has MUCH MORE powerful CPU (ARM) than hAP ac (MIPSBE). hAP AC is not possible to do bidirectional routing (from network A to network B and vice versa) simultaneously on more than 600 Mbit/s with CPU about 60%, while hAP ac^2 is capable of 940 Mbit/s with CPU about 3-5% 2) AFAIK, it ...
by mlenhart
Fri May 25, 2018 1:26 pm
Forum: General
Topic: Feature Request: TACACS/TACACS+
Replies: 35
Views: 8571

Re: Feature Request: TACACS/TACACS+

+1 for TACACS+ support
by mlenhart
Thu May 24, 2018 1:14 pm
Forum: Wireless Networking
Topic: WAP60G 5GHz Support
Replies: 20
Views: 2048

Re: WAP60G 5GHz Support

This is one of the stupidest answers you wrote. 60GHz is problematic on rain/snow as you probably know. 5GHz backup is not option, it is needed. Maybe would be better to listen to the customers who actually buy your equipment then to make conclusions by yourself? Maybe to ask your customers what th...
by mlenhart
Wed May 23, 2018 10:57 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 113316

Re: v6.43rc [release candidate] is released!

*) w60g - general stability and performance improvements; *) w60g - improved maximal achievable distance; *) w60g - removed distance lock for wAP 60G devices; Hello MikroTik team, could you please provide more details - what performance improvements have been done, what is the new maximal achievabl...
by mlenhart
Sat May 05, 2018 8:02 am
Forum: RouterBOARD hardware
Topic: (new HW request) RBmAP5acD
Replies: 4
Views: 683

Re: (new HW request) RBmAP5acD

Wap AC and Cap ac are simply too big 😀
by mlenhart
Fri May 04, 2018 4:14 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 113316

Re: v6.43rc [release candidate] is released!

BUG: WiFi LED is still On, winbox and also CLI shows wireless interface as disabled. Affected HW: RB951G-2HnD with firmware 6.41.3
Supout.rif already sent to MikroTik support, Ticket#2018050422002416.

EDIT: issue is also with firmware 6.43rc6
by mlenhart
Fri May 04, 2018 1:34 pm
Forum: RouterBOARD hardware
Topic: (new HW request) RBmAP5acD
Replies: 4
Views: 683

(new HW request) RBmAP5acD

Dear MikroTik,

could you please consider to create a successor of very popular mAP/mAP Lite but for 5 GHz band?
by mlenhart
Fri May 04, 2018 11:00 am
Forum: Wireless Networking
Topic: Wireless Wire Dish + wAP 60G AP = longer range?
Replies: 17
Views: 4044

Re: Wireless Wire Dish + wAP 60G AP = longer range?

@antonsb: thanks for sharing the info. Would it be possible to create a chart with achieved speeds, let's say with 50 meters step? So anyone can have an idea what are achievable speeds with regards to distance.
Thank you.
by mlenhart
Wed May 02, 2018 1:36 pm
Forum: Wireless Networking
Topic: Wireless Wire Dish + wAP 60G AP = longer range?
Replies: 17
Views: 4044

Re: Wireless Wire Dish + wAP 60G AP = longer range?

I can test that for you too :)
We will see who will get the gear sooner, mistry7 or me.

But honestly, I don't think it will work. What do I assume is that data from LHG can be received at WAP, but not in opposite direction, so the link will not form at all... But this is just my guessing...
by mlenhart
Wed May 02, 2018 8:39 am
Forum: RouterBOARD hardware
Topic: Hardware for RF Link 10-15 meter
Replies: 6
Views: 714

Re: Hardware for RF Link 10-15 meter

If it is not an outdoor installation, you SHOULD BE fine. (I am not sure about regulations in Germany)
So if you can, try to install it close to window.
by mlenhart
Mon Apr 30, 2018 3:15 pm
Forum: RouterBOARD hardware
Topic: hAP ac and RB951G-2HnD - High number of retries on cable connection
Replies: 0
Views: 347

hAP ac and RB951G-2HnD - High number of retries on cable connection

Hello, can anyone advise why are there so many Retries when I try to do iperf3 BW test from PC-A to PC-B? The network map looks like this: PC-A ----- ether4 on RB951G-2HnD - ether5 on same MT ----- PC-B Here is the iperf3 output: user@ubuntu-1:~$ iperf3 -c 192.168.20.254 -i 5 -t 60 Connecting to hos...
by mlenhart
Wed Apr 25, 2018 3:47 pm
Forum: Wireless Networking
Topic: hAP ac^2 Problems---Extremely Poor Performance found in 2.4G and 5G WiFi
Replies: 288
Views: 60891

Re: hAP ac^2 Problems---Extremely Poor Performance found in 2.4G and 5G WiFi

I am curious if mikrotik offers any (even symbolic) compensation for the affected users (or at least for those from them who somehow helped a bit to move forward with this case).
+1
by mlenhart
Tue Apr 24, 2018 10:19 pm
Forum: Announcements
Topic: Significant improvement for 60 GHz solutions
Replies: 45
Views: 15894

Re: Significant improvement for 60 GHz solutions

Topic is clearly about software improvements It is OK, that it is about SW improvements, but this SW improvements improves HW specifications. Maybe I was not clear enough, so once again (hope you will not consider it as spamming...) Does the improvement for 200 meters apply for all WAP60G units whi...
by mlenhart
Tue Apr 24, 2018 3:42 pm
Forum: Announcements
Topic: Significant improvement for 60 GHz solutions
Replies: 45
Views: 15894

Re: Significant improvement for 60 GHz solutions

increased supported distance for wAP 60G to 200+ meters. @strods: does this apply to all units, since the beginning of product distributions or is it limited only to some HW version? I know it has been reached by SW modification and phase array patterns, just want to be sure it is not HW dependent....
by mlenhart
Thu Apr 19, 2018 3:51 pm
Forum: Wireless Networking
Topic: hAP ac^2 Problems---Extremely Poor Performance found in 2.4G and 5G WiFi
Replies: 288
Views: 60891

Re: hAP ac^2 Problems---Extremely Poor Performance found in 2.4G and 5G WiFi

I am one of the moderators and I have never deleted the negative statement against mikrotik. What is more, I time to time express my negative statement freely too. Please, do not take all as one. If you believe your correct post was deleted, provide a date /time when you suspect it was done. I will...
by mlenhart
Thu Apr 19, 2018 2:29 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 63638

Re: LHG 60G experience

Ok this is CLI of 6.43, so you need not to ask, WTH is that..
6.43???
by mlenhart
Thu Apr 19, 2018 2:24 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 63638

Re: LHG 60G experience

How were you able to obtain it? AFAIK it is not in sale anywhere in europe yet...
Your comment is highly expected :)
by mlenhart
Thu Apr 19, 2018 11:35 am
Forum: Wireless Networking
Topic: Best Mikrotik PTP Wireless System carrying 10 units 4mp cctv cameras distance for PTP is 1km
Replies: 12
Views: 1023

Re: Best Mikrotik PTP Wireless System carrying 10 units 4mp cctv cameras distance for PTP is 1km

no one will give you any assurance.
We do not know your environment, your bandwidth requirements, your noise levels, configuration...
If you need any assurance, hire a MikroTik certified consultant in your country.
by mlenhart
Thu Apr 19, 2018 10:59 am
Forum: Wireless Networking
Topic: Best Mikrotik PTP Wireless System carrying 10 units 4mp cctv cameras distance for PTP is 1km
Replies: 12
Views: 1023

Re: Best Mikrotik PTP Wireless System carrying 10 units 4mp cctv cameras distance for PTP is 1km

Which band? 2 GHz or 5?
What is the noise level?
Are you limited somehow? Price, dimensions, power consumption...
What is your expectations for bandwidth?
by mlenhart
Thu Apr 19, 2018 10:20 am
Forum: General
Topic: hAP ac² LAN->WiFi 5GHz performance issue.
Replies: 23
Views: 5288

Re: hAP ac² LAN->WiFi 5GHz performance issue.

Any official answer? I'm a bit tired repeating this again and again, but... This is a user forum. Period. Mikrotik staff may occasionally answer some questions here, but they do not have to. If you need an "official answer" you should write you question to support@. I'm afraid that's the only "offi...
by mlenhart
Thu Apr 19, 2018 10:02 am
Forum: Wireless Networking
Topic: hAP ac^2 Problems---Extremely Poor Performance found in 2.4G and 5G WiFi
Replies: 288
Views: 60891

Re: hAP ac^2 Problems---Extremely Poor Performance found in 2.4G and 5G WiFi

This is a formal product not a beta or preview version. We trust you and buy it. We need an official representative from MikroTik give us at least an explanation. What happens and when you will fix this issue. I think for most of posters under this thread hAP ac2 is not their first MikroTik device....
by mlenhart
Tue Apr 17, 2018 2:48 pm
Forum: RouterBOARD hardware
Topic: LHG 60G
Replies: 63
Views: 13724

Re: LHG 60G

any idea when this product will be officially introduced - market launched?
by mlenhart
Tue Apr 17, 2018 2:40 pm
Forum: Wireless Networking
Topic: Huawei E3372 LTE modem not found - SOLVED
Replies: 17
Views: 16515

Re: Huawei E3372 LTE modem not found - SOLVED

How can I switch E3372 to work as PPP (serial) modem.
If you need E3372 which works as PPP modem, I can sell you as much as you want :D
I am looking for the opposite, E3372 which works as native LTE interface :)
by mlenhart
Thu Mar 22, 2018 4:18 pm
Forum: Wireless Networking
Topic: Wireless SNMP values - how to get them? [SOLVED]
Replies: 1
Views: 471

Wireless SNMP values - how to get them? [SOLVED]

Hello, can anyone advise how to get useful measurable information from wireless devices, like signal strength (and possible some other info, I don't know what is available...) using SNMP? Let's say I want to draw a signal strength graph using MRTG, but don't know which value I should ask for... Than...
by mlenhart
Wed Mar 14, 2018 1:33 pm
Forum: Wireless Networking
Topic: RB911G-5HPacD-NB = no spectral scan?
Replies: 7
Views: 926

Re: RB911G-5HPacD-NB = no spectral scan?

OK guys, here is an official answer from MikroTik support: Hello, We are working on a solution to improve the AC wireless chip performance, and finally, introduce our clients to the spectral scan features, but I can’t give you any promises about the timing when it will be available for clients, but ...
by mlenhart
Mon Mar 12, 2018 10:24 pm
Forum: Wireless Networking
Topic: RB911G-5HPacD-NB = no spectral scan?
Replies: 7
Views: 926

Re: RB911G-5HPacD-NB = no spectral scan?

that forum thread is the reason why I asked someone from MikroTik to answer this officially.
by mlenhart
Mon Mar 12, 2018 3:56 pm
Forum: Wireless Networking
Topic: RB911G-5HPacD-NB = no spectral scan?
Replies: 7
Views: 926

RB911G-5HPacD-NB = no spectral scan?

Dear MikroTik,
could you please advise IF and WHEN spectral scan be possible on RB911G-5HPacD-NB?
As it is not possible now, could you please advise how to choose best channel?
Thank you.
by mlenhart
Fri Mar 02, 2018 5:30 pm
Forum: Beginner Basics
Topic: help with design, please
Replies: 9
Views: 790

Re: help with design, please

[/quote]
Call your ISP and ask them when they will roll out IPv6 and to be on their pilot program for that.
[/quote]
That's what have I already suggested, but they have no plan for IPv6 deployment. So till that time, does the design created by me looks OK to you?
by mlenhart
Thu Mar 01, 2018 11:07 pm
Forum: Beginner Basics
Topic: help with design, please
Replies: 9
Views: 790

Re: help with design, please

on DD just natting, no mangling/conntrack/marking...
by mlenhart
Thu Mar 01, 2018 11:03 pm
Forum: Wireless Networking
Topic: Xiaomi phone low Wifi TX rate [SOLVED]
Replies: 112
Views: 26724

Re: Xiaomi phone low Wifi TX rate [SOLVED]

Dear MikroTik,
could you please let us know we will see a fix for this issue any ever at all?
by mlenhart
Thu Mar 01, 2018 9:33 pm
Forum: Beginner Basics
Topic: help with design, please
Replies: 9
Views: 790

Re: help with design, please

* natting will need to be done at antenna A. That's what have I already written :) Depending on the traffic amount, that can be taxing, as DD5 isn't that powerful. Have you considered putting a small router (ex: hex gr3) in between internet & dd5 A? then both DD5's can be in pure bridge What do you...
by mlenhart
Thu Mar 01, 2018 9:27 pm
Forum: Beginner Basics
Topic: help with design, please
Replies: 9
Views: 790

Re: help with design, please

Easier: get IPv6 from your internet provider and use it to manage the antennas. then you have enough addresses to directly access your antennas and you can still bridge the IPv4 address over both antennas to your router. Plus of course a second subnet of IPv6 is present at your LAN side and can be ...
by mlenhart
Thu Mar 01, 2018 5:20 pm
Forum: Beginner Basics
Topic: No internet connection with 5Ghz
Replies: 3
Views: 391

Re: No internet connection with 5Ghz

Do you have DHCP server configured for 5G interface?
by mlenhart
Thu Mar 01, 2018 4:36 pm
Forum: Beginner Basics
Topic: help with design, please
Replies: 9
Views: 790

help with design, please

Internet provider ------ antenna A-DynaDish 5 |---(( .........))---| antenna B-DynaDish 5 -----------MikroTik router------multiple 192.168.X.0/24 internal networks Hello guys, I would like to ask you for some help with network design and some basic configuration . I am getting just one public IP add...
by mlenhart
Thu Mar 01, 2018 12:24 pm
Forum: Announcements
Topic: Future of LTE products, user feedback requested
Replies: 86
Views: 19852

Re: Future of LTE products, user feedback requested

1. As much as possible - for upward and backward compatibility :)
2. Same as above - as much as possible
3. Definitely YES
4. European Union
5. Telekom, Orange, O2, SWAN
by mlenhart
Tue Feb 27, 2018 4:38 pm
Forum: Wireless Networking
Topic: Question About DynaDish 5 low bandwidth
Replies: 9
Views: 1253

Re: Question About DynaDish 5 low bandwidth

Try to change wireless to 802.11 and do the test again. Anyway, it is not the best idea to make conclusions based on built-in bandwidth test. Try with some gear behind the DynaDish (PC/laptop) connected directly to antenna using cable and use iPerf - it is free and available for Linux, Windows and m...
by mlenhart
Fri Feb 23, 2018 9:18 pm
Forum: Beginner Basics
Topic: Reset counters - no way or bug in WinBox?
Replies: 19
Views: 1983

Re: Reset counters - no way or bug in WinBox?

Well, my preferred way was to avoid writing some scripts for that, but if there is no other way, I have to do that :)
It will take some time, definitely, but it can't stop me.
by mlenhart
Fri Feb 23, 2018 6:05 pm
Forum: Beginner Basics
Topic: Reset counters - no way or bug in WinBox?
Replies: 19
Views: 1983

Re: Reset counters - no way or bug in WinBox?

I don't, I have better ISP without limits. :) Sometimes you don´t have a choice... On the other hand, if YOU are an ISP, how do you do statistics which user is (potentially) abusing your network or infected by virus? Counters can help in these situations... Relying just on router's interface counte...
by mlenhart
Fri Feb 23, 2018 5:43 pm
Forum: Beginner Basics
Topic: Reset counters - no way or bug in WinBox?
Replies: 19
Views: 1983

Re: Reset counters - no way or bug in WinBox?

Did you consider the possibility that you might just be one of the few people in the world who would want to reset these counters? Yes, but seems stupid that low-cost D-Link routers can do this without any issues and MikroTik can´t, LOL Well, then tell me how do you count your TX/RX data if you hav...
by mlenhart
Fri Feb 23, 2018 4:50 pm
Forum: Beginner Basics
Topic: Reset counters - no way or bug in WinBox?
Replies: 19
Views: 1983

Re: Reset counters - no way or bug in WinBox?

really? no other way?
I tought that MikroTik is a little more intelligent device... This comes to me as a stupid idea to reboot the device everytime I need just to reset the counters...
by mlenhart
Fri Feb 23, 2018 4:40 pm
Forum: Beginner Basics
Topic: Reset counters - no way or bug in WinBox?
Replies: 19
Views: 1983

Reset counters - no way or bug in WinBox?

Hello anyone, could anyone please advise how to reset counters on interfaces in main interface screen (after login via WinBox and clicking on Interfaces)? I am running on 6.41.2 (stable) on multiple devices: hAP ac Lite, RB2011UiAS-2HnD, RB951G-2HnD but I do not see any option in WinBox 3.12 to rese...
by mlenhart
Fri Feb 23, 2018 1:05 pm
Forum: Wireless Networking
Topic: Any chance to see NV3?
Replies: 24
Views: 3075

Re: Any chance to see NV3?

I am very sad to say it, but Nv2 looks dead to me and there is no official timeline for any improvements. Maybe it's time to move on from MikroTik to other, more flexible vendors... The one and only responsible for this is MikroTik with their behavior - but if they don't care, why should we stay wit...
by mlenhart
Wed Feb 21, 2018 4:07 pm
Forum: Beginner Basics
Topic: DHCP Relay or Nat Masquerade for connect dhcp server
Replies: 1
Views: 270

Re: DHCP Relay or Nat Masquerade for connect dhcp server

same as topic "How Can I connect to 1st dhcp server from other dhcp server."
Please stop making new topics for same question!
by mlenhart
Wed Feb 21, 2018 3:53 pm
Forum: Beginner Basics
Topic: RB2011 Basics
Replies: 3
Views: 372

Re: RB2011 Basics

Please check your model, only following models have PCB temperature monitor and Voltage monitor:
- RB2011UiAS-IN
- RB2011UiAS-RM
- RB2011UiAS-2HnD-IN
by mlenhart
Wed Feb 21, 2018 3:40 pm
Forum: Beginner Basics
Topic: how to access mikrotik from internet
Replies: 5
Views: 735

Re: how to access mikrotik from internet

You need to know what is your public IP address, based on the diagram you provided it should be 172.X.X.X, but you can check it on www.wimi.com This is your remote IP. In remote port an IP use this: IP address: 172.X.X.X Port start:8291 Port end: 8291 In Local port and IP use this: IP address 192.16...
by mlenhart
Sun Feb 18, 2018 2:32 pm
Forum: Wireless Networking
Topic: Xiaomi phone low Wifi TX rate [SOLVED]
Replies: 112
Views: 26724

Re: Xiaomi phone low Wifi TX rate [SOLVED]

I vote that we make new forum topic with alert to all new buyers informing them that mikrotik does not work correctly in 2.4ghz spectrum. And with regular bumping we should keep it on top of forum. I fully support this idea :) MikroTik has to wake up and stop ignoring customer complains and blaming...
by mlenhart
Fri Feb 09, 2018 3:28 pm
Forum: Wireless Networking
Topic: Xiaomi phone low Wifi TX rate [SOLVED]
Replies: 112
Views: 26724

Re: Xiaomi phone low Wifi TX rate [SOLVED]

I have the same problem with Samsung Galaxy XCOVER 4 and tablet LENOVO YOGA 2
:-( very bad
Do you have the problem in both bands, 2.4 and also in 5 GHz?
by mlenhart
Mon Feb 05, 2018 2:17 pm
Forum: Wireless Networking
Topic: Xiaomi phone low Wifi TX rate [SOLVED]
Replies: 112
Views: 26724

Re: Xiaomi phone low Wifi TX rate [SOLVED]

just to update a little, this issue is not only in 2.4 but also in 5 GHz... Tested on HTC One M9 with hAP ac, ROS version 6.41.
by mlenhart
Fri Feb 02, 2018 12:35 pm
Forum: RouterBOARD hardware
Topic: DynaDish 5 - U bolt internal diameter
Replies: 1
Views: 295

DynaDish 5 - U bolt internal diameter

Hello,

does anybody know what is the internal diameter on U bolt which is included with DynaDish 5, so what is the maximum pole diameter it can be mounted on?

Thank you.
by mlenhart
Thu Jan 25, 2018 12:16 pm
Forum: Wireless Networking
Topic: Xiaomi phone low Wifi TX rate [SOLVED]
Replies: 112
Views: 26724

Re: Xiaomi phone low Wifi TX rate [SOLVED]

Normis, any update to this? When we can expect to be fixed? It is a shame that vendor's (MikroTik) advice is to use higher-class phones. Why are you making devices (like hAP ac Lite = epic fail - ac on wireless, but only 100M ethernet) for SOHO users if you are not able to fix the issues promptly? M...
by mlenhart
Tue Jan 02, 2018 12:02 am
Forum: RouterBOARD hardware
Topic: Which MikroTik product for short PtP link?
Replies: 14
Views: 1266

Re: Which MikroTik product for short PtP link?

Sorry, I have checked the National Frequency Table and found there is also 24.15 - 24.25 GHz; available and also 61 - 61.5 GHz. I assume that price for these devices will be much higher than for 2.4/5 GHz, or am I wrong? Regarding number of WiFi networks, I can see about 25-30 networks on R52 card w...
by mlenhart
Mon Jan 01, 2018 11:21 pm
Forum: RouterBOARD hardware
Topic: Which MikroTik product for short PtP link?
Replies: 14
Views: 1266

Re: Which MikroTik product for short PtP link?

It is not possible make 500Mbit link in noisy environment. As others have said. You'll be glad if you do 100-200Mbps half duplex connection. SXT is not suitable for a noisy environment. It is completely plastic. Which frequencies are free (without licence) in your country? 10, 17, 24, 60 or 80Ghz? ...
by mlenhart
Mon Jan 01, 2018 10:24 pm
Forum: RouterBOARD hardware
Topic: Which MikroTik product for short PtP link?
Replies: 14
Views: 1266

Re: Which MikroTik product for short PtP link?

Mistry7, Paternot and InoX: thank you guys so much for your help, that are the answers I was waiting for - clearly written and full of facts, much appreciated guys :) 1) I have to clarify, that 540 Mbps was meant as half duplex, so one problem is solved :) 2) well, regarding noise, there is nothing ...
by mlenhart
Mon Jan 01, 2018 9:11 pm
Forum: RouterBOARD hardware
Topic: Which MikroTik product for short PtP link?
Replies: 14
Views: 1266

Re: Which MikroTik product for short PtP link?


Use DragonWave products
Could you please stay within the topic name? I am asking for MIKROTIK product recommendation.
If it is not possible to do it with MikroTik, please write WHY it is not possible and what should be possible to get with MikroTik products.

Thank you.
by mlenhart
Mon Jan 01, 2018 8:25 pm
Forum: RouterBOARD hardware
Topic: Which MikroTik product for short PtP link?
Replies: 14
Views: 1266

Re: Which MikroTik product for short PtP link?

650 Mbps wireless is the minimum
- installation will be in VERY noisy environment
- use of 5 GHz
Not possible make this link...
could you please explain why? which parameter is making it not possible?
by mlenhart
Mon Jan 01, 2018 8:09 pm
Forum: RouterBOARD hardware
Topic: Which MikroTik product for short PtP link?
Replies: 14
Views: 1266

Which MikroTik product for short PtP link?

Hello everyone, I need to build a short (cca 500 meters) Point-to-Point link vith following requirements and conditions: - speed has to be as high as possible on both parts - wireless and also wired (wired has to be 1Gbps) - 650 Mbps wireless is the preferred minimum, 540 Mbps is the absolute minimu...
by mlenhart
Thu Nov 30, 2017 4:37 pm
Forum: Beginner Basics
Topic: OSFP need hint.
Replies: 2
Views: 352

Re: OSFP need hint.

Hello,

I am not an OSPF guru, so my proposed solution may be incorrect, but here is my idea how this could be done:

1) configure OSPF on all interfaces on R1 so it can make a neighbourships with R2, R3 and R4
2) use out-filter to allow only networks you want to be advertised to R2, R3, R4
by mlenhart
Fri Nov 10, 2017 1:43 pm
Forum: Announcements
Topic: v6.40.5 [current]
Replies: 82
Views: 25226

Re: v6.40.5 [current]

Hello, just FYI, I have upgraded all of my RBs successfully on 1st try

List of RBs:
- RB433AH - previous version was 6.39.1 with factory default firmware
- RB951G-2HnD - previous version was 6.40.4 with 3.41 firmware
- RB2011UiAS-2HnD - previous version was 6.40.4 with 3.41 firmware